Problems DVD-RAM Mat****a UJ810 in Satellite T5200-802 (German Model)

Have discovered that i.e. NERO Burning ROM gives out an errorcode "calibration error" while using certain DVD-R.
Were do I find a firmware update for the Mat****a UJ810, so that I can write on any DVD-R.
(This way I have to try out different DVD-R, meaning I do spend to much money on trying out differen DVD-R, specially NONAME DVD-R)
Thanks for help

Hi,
here are the media Toshiba recommends to use:
DVD-RW media:
JVC, TDK
DVD-R media:
TAIYO YUDEN, Pioneer, Panasonic
CD-RW media:
RiCOH, Mitsubishi
CD-R media:
RiCOH, Mitsubishi, Maxell, Mitsui, TAIYO YUDEN

Similar Messages

  • Problem: DVD-RAM can no longer be read on MBP C2D

    The "MATSHITA DVD-R UJ-857D" in my MacBook Pro C2D is said to have read (but not write) support for DVD-RAM media.
    During the first few weeks of its lifetime, reading DVD-RAMs definitely worked. But now, no more, no matter what brand of media I try.
    All other types of optical media continue to work as advertised (read and write).
    I wonder whether this is a physical defect (but then why doesn't it affect other types of media?) or an issue caused by recent sopftware updates (but when I boot from an external DVD-drive using the very original MacOS DVD with no updates at all, why do I still not get read support on the internal drive?).
    AFAIK there has not been any recent firmware update for this model. So what can be the reason? Should I let Apple swap the drive? Has anyone else observed the same issue?
    Guido
    MBP C2D   Mac OS X (10.4.8)   MATSHITA DVD-R UJ-857D

    Hey Grant,
    thought you'd like to know my "cleaning the lens with a cloth" worked fine - uh... but for about three days only, then back to the same old, same old.
    I'd originally slid a business card covered with a lens cleaning cloth (from my camera bag) to clean the lens, and although the cloth emerged mostly pristine, I figured it must've done the trick as the drive started working again.
    So this time, I decided to go in deeper. I actually took the whole drive apart - case off, drive out, drive dismantled - and I had a long look around to see if any parts looked dirty or damaged...
    I found just one thing - the small silver rod on which the read/write head travels (the servomechanism that moves up and down the disc radius as it reads/writes) had some 'oily gunk' at the point where the travelling-head's 'sleeve' met it -  when I tried to move the head manually up and down the rod, it sort of staggered along. So I cleaned off the gunk with a cotton bud and then slid the drive-head up and down a few times 'till it seemed to run freely.
    Put everything back - and fired up my Mac Pro. And the drive has been 100% fine since then - two whole weeks!
    Maybe this time I've cracked it? (for my drive at least)
    Roger

  • Help! My T61 suddenly no longer recognizes my DVD-RAM drive!

    Today I tried to retrieve some photos from a DVD and then a CD placed into my T61s DVD RAM (Mat**bleep**a UJ-852 ATA) ... and the drive was not recognized by the system.  It was not displayed in the "My Computer" listing.  The drive powered up whenever I insert a disk, but nothing else happened. 
    The device properties box says:
    "This device cannot start. (Code 10)
    "Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available."
    But when I check, the system replies came back that the proper driver was already installed ... and that there was nothing else out there that was a "solution". 
    What can solve this sudden problem?
    Many thanks,
    -- Mike in San Jose
    Message Edited by almadenmike on 10-09-2008 11:12 AM
    Solved!
    Go to Solution.

    Thanks!  A variation of the latter seems to have worked and restored the DVD-RAM to proper working order:
    1) Disable drive
    2) Uninstall drive
    3) Remove drive
    4) Shutdown
    5) Restart
    6) Insert drive ... system recognized the drive, loaded the drivers and operation has been normal.
    Thanks for the tip. (I had disabled and removed/inserted it before, with no success.  But until reading your note, I did not have a shutdown/restart in between.)
    -- Mike

  • Equium L10 needs a driver for DVD-RAM drive

    It's rather embarrassing, but in recent days I've come to find that somehow, the driver for my DVD RAM (Mat****a UJ830s) is somehow corrupt or missing.
    I've searched high and low over the net to find the right driver to reinstall, but I can't find a single thing.
    Don't suppose anyone can help?

    Do you mean the simply common driver for the Mat****a UJ830s?
    Usually the windows use the common Microsoft OS driver and usually you will not find an Toshiba driver for this device.
    Ok, on the page you will find an DVD-RAM but its only for the reading and writing of the DVD-RAM medias.
    Caution when using DVD-RAM disks in the DVD MULTI drive Data cannot be written onto a DVD-RAM disk while the function for writing data onto Windows XP standard CD-R/RW disks is enabled.
    A message appears when this function has been enabled so when using a DVD-RAM disk, heed the instruction given in this message by clearing "Enable CD recording on this drive.

  • Satellite L30-105 (PSL33E) Windows Vista does not see DVD-ram UJ-850s

    Hi
    I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista doesn't recognize the DVD-ram any more. The BIOS recognize the DVD-ram. I did try to download the DVD-ram drivers but they are not on the side of Toshiba.
    Who can help me to get the right driver or know more? From the problems with the Mat****a DVD-ram uj-850s ATA device and windows Vista.

    Hi
    The CD/DVD drive does not need special drivers!!!
    The Vista includes a Microsoft driver which works with all ODDs (CD/DVD drives)
    Simply said, the Vista should recognize the drive without any problems.
    Some questions; did you get any error messages? What is the device manager status? Do you see any yellow exclamation marks?
    There is an old way to fix a similar drive issue. It worked under XP so try it on Vista OS.
    Its necessary to update the registry entry
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    1. Click on the start menu.
    2. If this is a Vista machine in the search box type in regedit without the quotation marks.
    3. search the registry key mentioned above.
    4. In the right panel youll see something along the lines of UpperFilter and LowerFilter you want to click on each filter key and hit delete. Click yes when it asks to confirm if you wish to delete the key.
    5. Restart Windows.
    6. Let me know if this works.

  • A50 DVD-RAM drive problem

    Hi,
    when I try to burn into 8x DVD-R, Nero tells it can burn only at 2x. It should normally 4x.
    The drive is Mat****a DVD-RAM UJ-820S, FW version 1.0
    I think the firmware update should solve this problem, but I cannot find it anywhere.
    Adrian

    Hi Ado,
    Did you checked any other DVD-Rs for writing? There could also be a problem with the medium (meantime problem of every DVD Writer manufacturer).
    Bye Rudi

  • SD-R6372 drive recognized as Mat****a DVD-RAM UJ830S

    Hello,
    (sorry but I'm not very good in english)
    I have a TOSHIBA SD-R6372 DVDRAM in my laptop computer, but windows (XP) recognize it as a MAT****A DVD-RAM UJ830S. So I can't write DVD-R and DVD-+RW. And when I wan't to updtae the firmware with SDR6372-1732.exe it's return the error : "The target drive is not found".
    I suppose is a driver fault, but I can't find the driver anywhere.
    Please Help me.
    Thank you :)

    Hi
    As far as I know there is no special driver for any drive and it will be used standard Microsoft driver. Just for DVD-RAM drive must be installed DVD tool. To understood your problem a little bit better it will be useful to know which notebook model you have.

  • Satellite A210-17X - PSAFGE-03600LFR - DVD-RAM upgrade

    Hello,
    I currently have a Toshiba laptop Satellite A210-17X - PSAFGE-03600LFR, after upgrading RAM and HDD, I would need some help to upgrade my DVD-RAM. The original MAT****A (Panasonic) DVD-RAM UJ-870 is not working any more because the laser cell seems to be damaged, it will not recognize any disk whether CD-ROM or DVD and firmaware update provided by Toshiba Europe Support did not change any thing.
    Because I need to replace it, I would rather like to install a more recent, more performant, quieter model, but I am having difficulties finding such replacement.
    First of all, the front "faade" of the current drive is smaller on the right hand-side than on the left hand-side and most model I find have a rectangular "faade" - i.e. both sides have the same size so it will not fit in the laptop. Is that "faade" removeable so that I could take that of the old drive off and put it on the new one?
    Would someone be able to provide me with some help in choosing the correct replacement drive?
    Thank you in advance
    Kind regards
    Eric

    Hi PauPau, Hi Macius,
    This is brilliant thank you very much for that information. I will be looking into it shortly. I am currently struggling a bit to upgrade another Toshiba Satellite with W7 x64 Ultimate but that I will post in another subject.
    Yes, thank you for asking, I found out how to remove/install DVD-RAM on my laptop. I upgraded the HDD which was getting unhealthy. I upgraded RAM and I also opened the laptop case so that I could get to the fan and clean it.
    I will let you know how I am doing once I will have purchased and installed a new DVD-RAM. Although I am still wondering whether it is worth it. I know that it is very practical in many cases, but I have learned to use USB bootable Flash drive since my BIOS Firmware upgrade allows me to boot from such devices.
    Otherwise, I do not really use CD-ROM/DVD-RAM anymore, NAS, external HDD, Mem sticks, SDHC cards, etc.. are so much more convenient to use.
    Would you mind sharing your point of view on this?
    Cheers
    Eric

  • Hp dvd-ram uj8b1 has a driver problem

    HP Pavilion dv6 Notebook PC
    Windows 7 home premium
    We were able to play Cds and Dvds, and now they are not playing.  I did download i-tunes recently, but don't recall if the problem emerged immediately after that.  We don't use discs very often.  When I ran the troubleshooting softward it said:
    hp dvd-ram uj8b1 has a driver problem
    Reinstall device driver Completed
    The drive is experiencing a Plug and Play device issueThe drive is experiencing a Plug and Play device issue
    Windows has detected a device status error with this drive and will keep checking for problems. Detected
    What should I do now?  How can I get this working again?
    Thank you

    Hello vijenthira,
    What is your product number and operating system?
    Thank you,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Z61m Mat**bleep**a DVD RAM UJ-850

    The DVD/CD Drive from Mat**bleep**a DVD RAM UJ-850, sometimes not at all is producing a Blue Screen Error with the foolowing information : BAD_POOL_HEADER
    Technicel Information:
    ***STOP: 0x00000019 (0x00000020, 0x87505510,0x87505528, 0x1A030001)
    Using Lenovos toolbox for testing the DVD üroduced also a blue screen error!
    Using the driver dtective give the following information: Error 1327:Invalid Drive
    Hope for help.

    I found a solution under the following Link, but it is yust for XP user:
    http://www.dougknox.com/xp/scripts_desc/xp_cd_dvd_fix.htm
    Good Luck
    Lutz

  • Mat**bleep**a DVD Ram UJ8D1

    I am having serious problems with my DVD RAM
    I'm at the verge of cracking, because I can't find help at any of our local Computer shops.
    What must I do to fix this? I've tried every website, every hint, everything.
    In the troubleshooter panel it tells me that there is an error with the drive, but it doesn't help me to fix it.
    Every time there's an error message.
    PLEASE HELP ME!!

    Open the tray and try to push with your finger the lens component (without touching the lens obviously) )towards center end and restart.

  • MAT**bleep**A DVD-RAM UJ-851S

    I need firmware for the MAT**bleep**A DVD-RAM drive. The Drive says its burning cds and burns nothing it reads all kinds of cd's burnt or not so it is not the filter that is bad just needs a refreash of the firmware . Thank you for your time !

    What is the model number of your HP notebook?

  • UJ862AS DVD-RAM doesn't recognize -R discs on Satellite U400

    For some reason my DVD drive wil no longer recognizes -R discs.
    I have a MAT****A DVD-RAM UJ862AS drive.
    Any clues?

    Hi
    Found some interesting info in user manual.
    *Page 78*
    There you can find a list of tested and good functioning disks from these manufacturers.
    CD-R:
    TAIYO Yuden Co Ltd, Mitsubishi KAGAKU Media CO LTD, Ricoh CO LTD, Hitachi Maxwell LTD.
    DVD-R:
    DVD Specifications for recordable discs for general version 2.0
    TAIYO Yuden Co Ltd,
    Matsu****a Electric Industrial Co LTD.
    There is also an notification for DVD R:
    There are two types of DVD-R disks: authoring and general use discs. Dont use the authoring disks. Only general use discs can be written to by a computer drive.

  • Problem w/Apple 4.7GB DVD-RAM drive (LF-D211A)

    It rejects DVD-RAM disks it used to accept (spits them out immediately after sucking them in), but only in their plastic cases. If remove from the case, it accepts the same DVD-RAM disk but regards it as read-only. Note: no problem reading CDs and DVD-ROMs (yet).
    How do I fix the problem? I would disable the read-only/writable sensor but I don't know how to do so.
    Thanks in advance for any help you can give me.
    John R Delaney
    <Edited by Moderator>

    Regarding the door, you will have to remove the drive's Bezel (faceplate) for the tray to exit the QS' opening. Pull lightly at the bottom of the faceplate and lift up.
    What does Disc Burning say in System Profiler for the new drive?
    Regards,

  • HP 2000 Notebook PC, DVD-RAM UJ8D1 has a driver problem

    I just recently upgraded my HP 2000 Notebook PC to Windows 8.1 and now it won't read DVDs or CDs. I have tryed reinstalling the driver but it dosn't help, it just says hp DVD-RAM UJ8D1 has a driver problem. I also went in Device Manager and checked the drivers properties and the device status is, Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
    Help Please!!!!!

    Hi:
    Please see the info at the link below.
    Try Resolution step 2 first and then if that doesn't work, go to Resolution step 3.
    http://support.microsoft.com/kb/314060/en-us

Maybe you are looking for

  • Outbound delivery gets created automatically not by vl10g

    Hi : Here is my scenario: it is third party order, once sales order get create a pr is created automatically, and we created purchase order  and inbound delivery for it, an outbound dellivery gets created one we finished creating inbound delivery as

  • How to use warning message

    Hello everyone! The message type of 'w' should have a yellow symbol on the status bar, right? But when I execute the code below, it produces the red symbol (X)... REPORT zmsgsamp        MESSAGE-ID s1. SELECTION-SCREEN BEGIN OF BLOCK a. PARAMETERS  : 

  • __buildin_expect not available with Solaris 10 x64?

    I would need to build a package called iRRAM which allows the calculation of real number to any accuracy. For example the number "e" to 65 decimals as given bellow. // example input/output of "echo 65|e_example": // Desired Decimals: 65 //+.271828182

  • Removing blue cast/tint from JPG (wrong white balance setting while taking picture)

    Hi, Photosohop newb here, still using CS3 (10.0), so please be patient. I was at a convention not long ago, where I took lots of pictures with my phone. I only noticed at home, that a few of the pictures came out with an intense blue cast because of

  • Masking Internal DNs

                     Hi, I am trying to mask the DNs for my helpdesk department who extensions consisting of 2XXX and 3XXX.  I have read the many posts on this forum about this very subject but I cannot seem to make it work, I've opened a TAC case 3 days