Problems Editing Key Commands

This started occuring after I opened a new project and played about with the 'adjust tempo by length locators' command.
I originally had apple T set as the shortcut to split regions, sometime during this it changed to the shortcut for the tempo change command.
Now when I go back to the key command list to change it, I can't seem to set split at SPL back to apple T; whenever I press T, it enters as "-116" ?!
Hopefully that makes sense, it's frustrating me a lot!

Hmm, it seems only the split by rounded SPL is working.
The standard split at SPL has been set to shift,apple T, but this is doing nothing whatsoever.
I've checked through the list and found the shortcut used twice so I got rid of the other instances but it's still not working.
Is it possible to search the key command list by shortcut rather than by function?

Similar Messages

  • Edit Key Commands?

    Can someone please tell me where in the Logic Pro X user manual does it explain how to edit Key Commands.
    Tried searching the manual without success.
    I have found the Key Commands window where you can do this but I don't understand how to use it.

    Peter Whitaker wrote:
    Can someone please tell me where in the Logic Pro X user manual does it explain how to edit Key Commands.
    Tried searching the manual without success.
    You may have overlooked it.
    http://help.apple.com/logicpro/mac/10/#lgcp41ff6979

  • ITunes 10.4.1 Problem with Key Command Go to Current Song - Doesn't always work

    Since updating to iTunes 10.4.1, I've noticed that the key command, command + L doesn't always work to display the current song.

    I have this problem in iTunes 10.7 (21). The "Go to Current Song" option exists in the Controls menu, but even when audio is playing it is disabled.

  • Final Cut Pro 7 keyboard problem, losing key commands/shortcuts

    Hi Everyone,
    I installed Final Cut Studio 3 on my new iMac.
    When i open FCP 7 I assign a shortcuts to keyboard layout, but when I close and re-open FCP 7 my commands/shortcuts will be lost...
    If I save my layout and I load the profile saved, same thing, shortcuts will be lost.
    With my old final cut 6 I never had this problem.
    There are any solutions?
    Thank everyone!

    Thank you mishmumken,
    I found this Partially solutions for this problem, I think is a apple Bug, I wait for any fix:
    Solution for Studio 2 AND Studio 3:
    1) Each time you start your computer, go to System Settings - International
    2) Change the language from your language to English
    3) Change the language from English to your language
    4) Start FCP
    5) Your shortcuts and the FCP shortcuts work OK
    You have to do this each time you restart the computer. People working with the English language setting don't have this problem.
    This bug is about 2 years old. Shame on Apple for not solving the problem!!!

  • Step input key commands active all the time - really annoying

    In Logic X, I'm experiencing a problem where the step input key commands are overriding the global key commands, even when the step input window is not open.
    For example, when I'm looking at the main Logic window, with the step input window closed:
    -I press the space bar, and the playhead advances one division value
    -I press the T to change the tool, and it creates a region and puts a tiny F# there (!!)
    -I press Y to open/close the library, and it creates a region and puts a G# there.
    The only way around it right now is to edit my key commands and delete all step input commands that are getting in the way of the more universal ones.
    Has anyone else encountered this?

    Yes, I am. 
    Actually, I haven't even really been using the step window.  The problem seemed to start out of nowhere, and I noticed by looking through the "Edit key commands" window (opt-K), that what Logic was doing was using all the step input key commands instead of the global commands.
    The Art Of Sound wrote:
    Just to double check.. You are clicking on the Arrange window to bring the focus to that window yes. after you closed the step window?

  • LPX Key Commands acting weird???

    I have 2 problems with Key Commands window.
    1.-I have opened the KeyCommands window and it opens up at the top of my screen.
    The top of the Key Commands window is under the task bar and I can not pull it down.
    2.- My LPX Key Commands started to act weird.
    Space bar does not work for play/pause.
    It creates a small MIDI region instead.
    X does not show the mixer and any other thing does not really work.
    It worked at the beginning when I firs installed it.
    Could this be a bug?
    If I choose Logic 9 set the everything works like the LP9 and it is fine.
    But, I wanted to learn the new set and I cannot use it.
    Any ideas?

    hi
    Do you have installed another language for typing?
    If so check that your keyboard is in US typing
    Logic respond strange when another language is active
    hope it helps
    B

  • PRINTING KEY COMMANDS/ EDITING VOCALS/LOGIC PRO 7 compared with Logic 8

    Dear all,
    q1: i am trying to print the key commands. A way to do this is by Copy Key Commands in the Options pull down menu and then paste it onto a text editor (e.g word). My problem is, when I paste it onto word the names of the commands appear but the actual key commands on the right do not, and some symbols appear on the left of the names where they should not. Is there a simple way to print the key commands. My word processor is a 2004 word version and my Logic Pro 7 about a year old.
    q2: I am recording a multitude of vocals. Which window would you find most practical for quick and effective editing? the arrange window or going into each region by double click and trim detail there? I somehow seem to prefer the arrange but would welcome any suggestions.
    q3: I feel much more comfortable using Logic Pro 7 as Logic 8 does not advance my workflow yet. Am I alone in thinking in these terms. Would you agree on the possibility of users sticking at 7 for quite some time, maybe a year or two before they switch to 8 if at all. I d be very interested to hear anyones thoughts on this
    Thank you all for reading. if you can spare a thought ot two I d be so thankful.
    Nik

    My experience is that I only learn a few key commands at a time.. ie really use them and remember them. Therefore go to the KC window and open up the commands where you want to concentrate your learning. Then take a Screenshot
    (Command + Shift + 4 and draw a box) which appears as a Picture 1 on your desktop. Then just refer to that
    many users ( me included) are still working in L7 with occasional experimental forays into L8
    Those really on top of L8 have committed early on and really gone for it.. if you dont have a high new info tolerance or are not particularly software savvy.. stick with L7

  • The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command   to e

    the problem I have since I upgraded to Mavericks version 10.9.1
    The problem appears only with Mail not with other programs, not even with my browser.
    When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
    As I have a problem with my eyes, This is a serious matter for me.
    When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
    Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but  he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

    Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
    My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
    I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
    Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

  • Problem with 'Edit Locally' command -- Due to IISProxy?

    Hi,
    We have a problem with 'Edit Locally' command since we are using Windows Authentication. Our architecture is:
    SAP EP 6.0 SP2 Patch 28 (Solaris)
    IIS Proxy (Windows 2003)
    The situation is:
    If we access to SAP Portal using old url (directly to Solaris) using form-based authentication we do not have any problem with 'edit locally' command.
    However, if we access to SAP Portal using IISProxy and Windows Authentication we get an 'Operation failed' error message.
         Java plug-in console shows the following message:
    cargar: clase com/sapportals/wcm/app/docapplet/DocApplet.class no encontrada.
    java.lang.ClassNotFoundException: com.sapportals.wcm.app.docapplet.DocApplet.class
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         ... 10 more
    Where is the problem? Is due to authentication method? SAP Portal or IISProxy configuration?
    Thanks,

    Thanks for your comment,
    Now, we have tested with version 1.5.0_01 plugin version but the result is the same: 'Operation failed'
    This is a very important topic to solve before installing Windows Authentication in a productive environment.
    Has anybody any solution?
    Damiá

  • Problem with Put Key Command

    Hi everyone
    I'm woking on Gem Xpresso card which support scp 02.
    I can Authenticate successfully and Install and load my applet on it. but I have problem in put key command.
    my first key set is:
    47454d5850524553534f53414d504c45
    and this is the key that I want to set as my new key:
    404142434445464748494a4b4c4d4e4f
    with the algorithm that I use the encrypt value of this key will be :
    33173C8ECDA55BDF7E50625531BE4FC5
    and its check value will be :
    8BAF47
    so this is the APDU that I send for Put Key command:
    80D800814301811033173C8ECDA55BDF7E50625531BE4FC5038BAF47811033173C8ECDA55BDF7E50625531BE4FC5038BAF47811033173C8ECDA55BDF7E50625531BE4FC5038BAF47
    but I recieve error 94 85 (invalid check value)
    do I calculate my check value wrong?
    does different versions of jcdk or different versions of globalplatform hav different ways for calculating check value and keys encrypted values?
    I'll appreciate any help
    Best Regards,
    Shilan

    Try visit Gemplus forum or mailing-list.

  • Put Key Command Problem

    Hi everyone ,
    I'm trying to change my card's default key to some other key .
    My card supports GP 2.1.1 and JCRE 2.2.1
    My default keys are :
    I've tried put key command (after opening secure channel ) with defferent P1 and P2 and key versions but I recieve errors , bellow is my APDU logs :
    I'll appreciate it if anyone could help me to find the correct byte setting for p1 and p2 parameters and key version .
    Best Regards,
    Vivian

    Hi,
    What is the status word being returned by your command? Also, can you post the host challenge and response to INITIALIZE UPDATE for the APDU session so I can recreate the session keys to compare key data field values? The only thing I can see with that APDU that may cause you any issues is the Le is not present. The PUT KEY command will return the KCV's on success. Other than that, the only problem could be the encryption. Are you using the session DEK key to encrypt the key values?
    Cheers,
    Shane

  • Key command for playing region in sample edit window... doesn't work?

    I'm trying to get the play/stop key commands to behave as they did in L7. I want to use the enter and zero keys on the number pad to start and stop playback in the arrange window. I want to use the space bar ONLY to play back the selected region when I'm in the sample edit window.
    (reason being when you're flying back and forth between the two windows, it's all too easy to start the transport in the arrange window, an annoyance when editing individual pieces of audio in the sample editor)
    When I assign the space bar to the key command "play/stop region" in the sample edit window, it only plays the entire waveform... i.e. it doesn't play only the highlighted region. This must be a bug. If you click the little speaker icon ("prelisten") in the sample editor, it will play the selected region only, but there's no hot key for this button.
    Oddly, the "windows showing audio files" play/stop key command, DOES play only the selected region in the sample edit window, but unfortunately, this key command behaves globally, so if the arrange window is selected, it stops and starts playback there too, which I don't want.
    Any ideas (besides a bugfix)?
    Thanks...
    Mitchell Sigman

    Hi,
    Prelisten is defaulted to ⌥M. You can reassign any keycommand though. See p. 159 of the LP8 User Manual.
    regards, Erik.

  • Using key commands while editing text...?

    I love key commands. They help get things done sooo much faster...UNLESS I'm in the middle of editing text with the type tool and I want to, say, change to the arrow/selection tool. I can't just hit "A" or "V", since it will just add this to my text.
    To all you folks out there who are like me and love key commands, isn't there some way to get around this? Either a key command that can be used while editing text, or a key command for "exit type mode"?
    I'd welcome any thoughts on the subject. Thanks!

    I did try to add a Control modifier, but it seems that tool shortcuts don't allow you to use Control or Alt or function keys.
    Thanks for the Esc suggestion. That's just what I was looking for--something simple that I had overlooked!
    Thanks, Scott!

  • What is the key command to open Audition in Logic 8?

    The little play icon in the bin, sample editor, etc.
    The one for auditioning things.
    Doesn't work for me. The only way I can get, for example, a playback from cursor position in the sample editor--is to manually click on the little green play icon with the mouse. Same with the bin, loops, and so on.
    For many years I've had key commands to do this kind of thing, but it is broken for me since Logic 8. What is the key command for this called? I've tried disabling the space bar as a key command, and I've also tried re-enabling it for "play or stop". Although in the latter case, that should still function the way it does in the arrange window.
    Actually, I've tried a lot of things and I'm completely out of ideas.
    I posted on this subject several months ago and it remains unresolved. For the life of me I cannot get the audition button to work via any key command.
    Help?
    TIA
    Message was edited by: danseq

    Hi
    If you imported your key commands from version 7 there can be problems in version 8.
    Try using one of the key command presets from version 8.
    HTH
    CCT

  • MobileMe Sharing Key Commands?

    Hi,
    I have a Mac Pro and newly purchased 17" MBP which is my remote editing suite. I have some useful customized keyboard shortcuts which I told my Mac Pro's Logic Studio to backup/sync on Mobile Me.
    After trying various ways of getting these key commands the new laptop (including what I thought would be the obvious "export key commands" option in Logic) I've yet to successfully copy my key commands over, and when I tried to sync my MBP's commands in the preferences (thinking I could "restore" from the backup I'd made on my MPro, Logic said it could only do this by taking ownership of the commands from the Mac Pro, which I said yes to, and it still didn't do it!!
    Is this a "its supposed to work but doesn't due to issues with MobileMe" problem (As it seems a brilliantly simply idea) or am I missing some elephant-in-the-room trick here?
    Thanks!
    Ben

    ...anyone?

Maybe you are looking for