Problems enabling nfs client and server

I just re-build a solaris 11.1x86 on a x4640 SunFire
Have problems enabling nfs
First i typed the following command:
# svcs network/nfs/server
disable
Second I typed the following command:
#svcadm enable network/nfs/server
# svcs network/nfs/server
offline
did this 3 or 4 times without success...
any ideas?
I holding production here! Please help!!

Let's rule out the easier stuff first...
Do you have something shared?
I think you need to have something shared before you can enable the nfs server service.
Or, if you share something, the service is started automatically. See below.
Thanks, Cindy
# svcs -a | grep nfs
disabled Feb_26 svc:/network/nfs/client:default
disabled Feb_26 svc:/network/nfs/server:default
disabled Feb_26 svc:/network/nfs/rquota:default
# svcadm enable svc:/network/nfs/server:default
# svcs | grep nfs
disabled 13:51:52 svc:/network/nfs/server:default
# zfs set share.nfs=on rpool/cindy
# share
rpool_cindy /rpool/cindy nfs sec=sys,rw
# svcs | grep nfs
online Feb_26 svc:/network/nfs/fedfs-client:default
online Feb_27 svc:/network/nfs/status:default
online Feb_27 svc:/network/nfs/cbd:default
online Feb_27 svc:/network/nfs/mapid:default
online Feb_27 svc:/network/nfs/nlockmgr:default
online 13:52:35 svc:/network/nfs/rquota:default
online 13:52:35 svc:/network/nfs/server:default

Similar Messages

JSSE Client and server communication problem .err:untrusted server cert

Hai all,
I am trying to communicate JSSE client and server.
I have created root.cert(CA),root.key,server.cert,server.key , client.cert and client.key. All these certificates are created using openssl.
I have placed root.cert in default keystore cacerts.
I have created a keystores(server & client) name mykeystore.
I have placed root.cert and client.cert in the client keystore.
I have placed root.cert and server.cert in the server keystore.
But during the run time i am getting javax.net.ssl.SSLException: untrusted server cert chain.
please suggest the modifications needs to be done to fix the error.
please tell me In the client keystore and in the server keystore....what certificates we need to put?
whether my approach as said above is correct or not?
In java code how to specify this particular certificate we are referring?
I have coded in this way ....
SSLContext ctx;
KeyManagerFactory kmf;
KeyStore ks;
char[] prasad = "prasad".toCharArray();
ctx = SSLContext.getInstance("SSLv3");
kmf = KeyManagerFactory.getInstance("SunX509");
ks = KeyStore.getInstance("jks");
ks.load(new FileInputStream("mykeystore"), prasad);
kmf.init(ks, prasad);
ctx.init(kmf.getKeyManagers(), null, null);
factory = ctx.getSocketFactory();
But my doubt is we are specifying only keystore name with that how it will check root.cert(ca) and client.cert and server.cert?
Is there any modifications need in my code?
Please tell me some way ...
Thanks ,
Prasad.

Hi prasad,
There will be a problem with the certificates being received from thr remote server or client. Check that your trust store contains the certificate of the remote machine or the CA that signed it and that the certificate has not expired.
Also be sure that both machines are using the latest version of the JSSE.
Hope this will help you.
Regards,
Anil.
Technical Support Engineer.

Strange problem with SQLPLUS when client and server on the same box

Hi,
I have the problem with SQLPLUS when clinet and server on the same machine.
With client and server on the same machine i am running the command
sqlplus -l username/password@connect_identifier as SYSDBA.
With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
How to get rid of this behaviour. Is there any way to do this.
I am running this command by creating a process in C#
Edited by: user11000236 on Jun 16, 2009 10:31 AM

user11000236 wrote:
Thanks for the info.
How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
This is explainted in the above mentioned link:
Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

Async tcp client and server. How can I determine that the client or the server is no longer available?

Hello. I would like to write async tcp client and server. I wrote this code but a have a problem, when I call the disconnect method on client or stop method on server. I can't identify that the client or the server is no longer connected.
I thought I will get an exception if the client or the server is not available but this is not happening.
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
How can I determine that the client or the server is no longer available?
Server
public class Server
private readonly Dictionary<IPEndPoint, TcpClient> clients = new Dictionary<IPEndPoint, TcpClient>();
private readonly List<CancellationTokenSource> cancellationTokens = new List<CancellationTokenSource>();
private TcpListener tcpListener;
private bool isStarted;
public event Action<string> NewMessage;
public async Task Start(int port)
this.tcpListener = TcpListener.Create(port);
this.tcpListener.Start();
this.isStarted = true;
while (this.isStarted)
var tcpClient = await this.tcpListener.AcceptTcpClientAsync();
var cts = new CancellationTokenSource();
this.cancellationTokens.Add(cts);
await Task.Factory.StartNew(() => this.Process(cts.Token, tcpClient), cts.Token, TaskCreationOptions.LongRunning, TaskScheduler.Default);
public void Stop()
this.isStarted = false;
foreach (var cancellationTokenSource in this.cancellationTokens)
cancellationTokenSource.Cancel();
foreach (var tcpClient in this.clients.Values)
tcpClient.GetStream().Close();
tcpClient.Close();
this.clients.Clear();
public async Task SendMessage(string message, IPEndPoint endPoint)
try
var tcpClient = this.clients[endPoint];
await this.Send(tcpClient.GetStream(), Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async Task Process(CancellationToken cancellationToken, TcpClient tcpClient)
try
var stream = tcpClient.GetStream();
this.clients.Add((IPEndPoint)tcpClient.Client.RemoteEndPoint, tcpClient);
while (!cancellationToken.IsCancellationRequested)
var data = await this.Receive(stream);
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(NetworkStream stream, byte[] buf)
await stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive(NetworkStream stream)
var lengthBytes = new byte[4];
await stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await stream.ReadAsync(buf, 0, buf.Length);
return buf;
Client
public class Client
private TcpClient tcpClient;
private NetworkStream stream;
public event Action<string> NewMessage;
public async void Connect(string host, int port)
try
this.tcpClient = new TcpClient();
await this.tcpClient.ConnectAsync(host, port);
this.stream = this.tcpClient.GetStream();
this.Process();
catch (Exception exception)
public void Disconnect()
try
this.stream.Close();
this.tcpClient.Close();
catch (Exception exception)
public async void SendMessage(string message)
try
await this.Send(Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(byte[] buf)
await this.stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await this.stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive()
var lengthBytes = new byte[4];
await this.stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await this.stream.ReadAsync(buf, 0, buf.Length);
return buf;

Hi,
Have you debug these two applications? Does it go into the catch exception block when you close the client or the server?
According to my test, it will throw an exception when the client or the server is closed, just log the exception message in the catch block and then you'll get it:
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.Invoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
Console.WriteLine(exception.Message);
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
By the way, I don't know what the SafeInvoke method is, it may be an extension method, right? I used Invoke instead to test it.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Client and Server in one process

Hi all,
I am trying to create a process which can act as both Client and Server.
How can I do this?
Thanks!

AH. That's a better definition or explanation. Thanks.
This smells of a single process with multiple threads, each thread handling the basic needs of your requirements. In other words, have a thread deal with making one or more client type connections (use a main thread - the client controller - to spawn client-connection threads. This assumes you need multiplicity in your client-connection model.
Then make another thread - the server controller - to handle inbound connections, spawning a new thread for each inbound connection. Your main thread, the one that contains your main method, can watch everything that's going on and log or report what's going on in your client and server threads.
Going into specifics would be a lot to do here. Maybe someone is up for the challenge. Of course, this being a "New to Java Technology" forum, these concepts may be a bit beyond your skillset.
This is not the only way to go about solving your problem, but it's the only way I can think of at the moment given your requirements.
Hope this helps some.

Socket communication between client and server

Hi all,
I am doing an assignment for communication between java client and java server using sockets. This communication is in the form of XML documents. I am facing a problem in this communication.
Actually at Server side I'm creating an XML document(Document type object) using DocumentBuilderFactory in javax.xml.parsers package and transforming this Document into a stream using StreamResult.
My code is :
Transformer xmlTransformer = TransformerFactory.newInstance().newTransformer();
StreamResult xmlString = new StreamResult(currentClientHandler.getSocketOutputStream());
DOMSource xmlDocSource = new DOMSource(xmlDocument); // xmlDocument is Document type reference
xmlTransformer.transform(xmlDocSource, xmlString);
so, this xmlString(i.e. StreamResult) is passed directly into the output stream. Here I need to close() output stream after transform() call to help SAX parser to know about end of stream.
Now at Client side, I am parsing this stream using SAX parser. It parses this correctly. But when sending some another data back to Server when client opens output stream, it given Socket closed exception. I know that closing input or output stream closes socket. But in my problem, I have to send data in streams and not by using files or byte[] etc.
So what is nearest solution to problem ??
Plz help me. Any kind of help will be greatly appreciated.

hi
thanks for ur reply.
I didnt get any error msg while getting the back the datas.
Actually i divided my application into two parts.
My application will act as both server and client.
server ll get the browser request and send to the client and the client will send that data to the c++ server.
Im able to do that.and unable to get the data from server.
Didnt get any error.
can u tell me how to make an application to act as both client and server.
I think im wrong in that part.
thanks a lot

UDP Client and Server

I am trying to run a UDP Client and Server by running the server first and then the client. But when I try to do that I get the message java.lang.NoClassDefFoundError: UDPServer and java.lang.NoClassDefFoundError: UDPClient. I have included the code below. Can you please help. Thank you.
UDPClient.java:
import java.io.*;
import java.net.*;
import java.util.*;
public class UDPClient{
    public static void main(String[] args) throws IOException{
      Date d=new Date();
      long time1, time2, ETE, sumETE, maxETE, avgETE;
      if(args.length!=1){
          System.out.println("type java UDPClient <hostname>");
          return;
      time1=d.getTime();
      DatagramSocket s=new DatagramSocket();
      String st=new String("dldfjsdkjf");
      byte[] buf=new byte[256];
      buf=st.getBytes();
      InetAddress address=InetAddress.getByName(args[0]);
      DatagramPacket p = new DatagramPacket(buf, buf.length, address, 8777);
      s.send(p);
      p=new DatagramPacket(buf, buf.length, address, 8777);
      s.receive(p);
      time2=d.getTime();
      ETE=(time2-time1)/2;
      s.close();
UDPServer.java:
import java.io.*;
import java.net.*;
import java.util.*;
import java.lang.*;
public class UDPServer{
public static void main(String[] args){
    try{
      UDPServerThread ust = new UDPServerThread();
      ust.start();
    catch(IOException e){}
UDPServerThread.java:
import java.io.*;
import java.net.*;
import java.util.*;
import java.lang.*;
public class UDPServerThread extends Thread{
DatagramSocket s=null;
BufferedReader br=null;
PrintWriter pw=null;
public UDPServerThread() throws IOException{
    this("UDPServer");
public UDPServerThread(String name) throws IOException{
    super(name);
    s=new DatagramSocket(8777);
public void run(){
      char[] ca=new char[10];
    //while(true){
      try{
          byte[] buf = new byte[256];
          DatagramPacket p = new DatagramPacket(buf, buf.length);
          s.receive(p);
          String st=new String(p.getData());
          for(int i=0; i<10; i++){
              ca=st.charAt(i);
buf=st.getBytes();
InetAddress ad = p.getAddress();
int port = p.getPort();
p = new DatagramPacket(buf, buf.length, ad, port);
s.send(p);
catch(IOException e){
System.err.println("Failed to run the server");
System.exit(-1);
s.close();

this has nothing to do with your code, but how you are running it. It is a classpath problem.
You should go to the directory where the UDPClient.class is, and type
java -classpath . UDPClient
similarly for the UDPServer

JSSE client and server

Hai all,
I am trying to communicate jsse client and server.
It is showing socket closed error.
when will we get java.net.SocketException: Socket closed?
please tell me way to sort this problem
Thanks,
Prasad.

Hi prasad,
There are two reasons for this error to occur
java.net.SocketException: Socket closed
(i)First is that the provider is not registered properly. Check your java.security files and make sure that you have created an entry for
com.sun.net.ssl.internal.ssl.Provider.
Then make sure that there are no extra java.security files on your hard drive that are being used by your runtime configure your providers. If there make sure to add the providers to them also.
(ii) Secondly there may be problem with your keystore. Make sure that you are providing the proper file and password for your keystore.
If you are using SSL socket server then check the following code:
SSLServerSocketFactory ssf = (SSLServerSocketFactory )SSLServerSocketFactory.getDefault();
ServerSocket ss = ssf.createServerSocket(PORT);
Socket s = ss.accept();
If you are using regular sockets, perform the following:
ServerSocket ss = new ServerSocket(PORT);
Hope this will help you.
Regards,
Anil.
Technical Support Engineer.

How to handle when Client and server write to the socket at the same time

Hi all,
I'm writing a socket communication when client and server may write information the the socket at the same time. I look every where but the samples from the internet only shows example of server replies to client after receiving requests from clients.
Let's say that:
Client 1 ->Socket 1 -> Server 1
Now if there are two threads in the server, one blocked waiting for the input from client on socket 1, the second one write something on the socket to client 1, is it possible?
And if it's possible, if at the time Server 1 writes information to Client 1, Client 1 writes some information to Server 1 too, will there be any conflict problem or the socket could handle that two ways communication simultaneously?
It's critical questions for me. Thanks for your help.

I really use Server Client paradigm. However, beside the request, response mechanism, there is also an additional mechanism called update which server periodically send information update to client without the need for a request from client.
So you suggest client should initiate 2 sockets, one for request and response, one for receiving update from the server? Will this work?

How to run a datagram socket client and server program

hi,
I am new to socket programming. I am following the tutorial of sun for socket programming...The link is
http://java.sun.com/docs/books/tutorial/networking/datagrams/clientServer.html
I have understood the concept, but the problem is i cannot run the program. I am using netbeans and i have created a package and stored the files QuoteServer,QuoteServerThread, QuoteClient in this package. How can i make the server program run first and then client program in netbeans
kindly help me
Thankyou

I think you are trying to run both server and client
on one machine!!!
It is impossible, your server is blocking the port to
send packets, so you must run client on another
computer!!!It's not impossible to run a client and server on the same machine just for testing or as a demo. Just have the server listen on one port and the client use a different port.
No need to use 2 seperate computers. I've done it one computer before without a problem.
Nick

Connection between SDM client and server is broken

Dear All,
First of all this is what I have
-NW04 SPS 17
-NWDS Version: 7.0.09 Build id: 200608262203
-using VPN connection
-telnet on port 57018 is succesfull
I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
Inner exception was :
Filetransfer failed: Error received from server: Connection between SDM client and server is broken
I have already read a lot of topics,blogs,notes but didn't find the solution.
Can anybody help me?
Best Regards

Having same issue. Nothing helped so far... Using NWDS 7.0 SP18.
I have turned SDM tracing on and this is what I see on client side after sending first data package:
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1, 43):Connection reset"
com.sap.bc.cts.tp.net.NetComm: debug " throwing IOException(net.id_000001)"
com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
My connection on server is still active so I have to restart SDM server to reset and try it again.
Anyone have idea whats happening?
Edited by: skyrma on Feb 24, 2012 2:46 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM

Communication between client and server

I am using sockets for communication between the client and the server. is there any other way that i can use for communication between the client and server???

Plenty of ways: JMS, SOAP, RMI, a RESTful API, writing-files-to-a-shared-directory-on-the-disk, Sneakernet, ...
Some of them use sockets (or better TCP/IP) as the underlying protocol.
But to give you a good answer, you would have to tell us why you want a different way. I hope you're not searching for a different way just for the sake of being different.

How to create client and server app using node.js in firefox os.

I want to create a client and server app using node.js for firefox os. Please suggest me how to create a apps.
I want to send a request from client to server and based on client request, service reply to client.
If any links available, Please share it.
Thanks

Hi sb00349044,
The SUMO forums focuses on end-user support.
For questions about developing for Firefox OS, you will find better guidance in MDN, StackOverflow, and mailing lists:
* [https://developer.mozilla.org/en-US/Firefox_OS MDN - Firefox OS]
* [http://stackoverflow.com/questions/tagged/firefox-os StackOverflow - Firefox OS]
* [https://lists.mozilla.org/listinfo Mailing Lists at Mozilla]
Thanks,
- Ralph

Configure client and server

Hi ,
Iam trying to configure client and server on OEL5.5 on vmware server i ahve 2 virtual machines which are on network i want to make one machine as server and another as client so on server machine i have a database called as SERVER and iam creating a listerner for it and my listener is created i chked my listener.ora files but on termianal when i execute
LSNRCTL> STATUS LISTENER1
TNS-01101: Could not find service name
LSNRCTL>
LSNRCTL> START LISTENER1
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener1.log
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=oracle10g.home.com)(PORT=2525)))
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
Linux Error: 98: Address already in use
Listener failed to start. See the error message(s) above...
and copying and pasting the contents of listener.ora file
# listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle10g.home.com)(PORT = 2525))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
SID_LIST_LISTENER1 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = server)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(SID_NAME = server)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle10g.home.com)(PORT = 1521))
so as there is only 2 listeners on my machine named as listener which listens at 1521(default) and another which i created listener2 listens as 2525
so please help me and let me know where iam going wrong
Thanks in advance ....
with Regards
Kavita

user12665759 wrote:
Hi ,
Iam trying to configure client and server on OEL5.5 on vmware server i ahve 2 virtual machines which are on network i want to make one machine as server and another as client so on server machine i have a database called as SERVER and iam creating a listerner for it and my listener is created i chked my listener.ora files but on termianal when i execute
LSNRCTL> STATUS LISTENER1
TNS-01101: Could not find service name
LSNRCTL>
LSNRCTL> START LISTENER1
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener1.log
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=oracle10g.home.com)(PORT=2525)))
TNS-12542: TNS:address already in useThose last two lines tell the tale. Something else is running on port 2525. Why are you trying to use that port for your listener?
Use netstat to find out what process is using the port.
And as a follow-up, why configure two listeners?
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
Linux Error: 98: Address already in use
Listener failed to start. See the error message(s) above...
and copying and pasting the contents of listener.ora file
# listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle10g.home.com)(PORT = 2525))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
SID_LIST_LISTENER1 =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = server)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(SID_NAME = server)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle10g.home.com)(PORT = 1521))
so as there is only 2 listeners on my machine named as listener which listens at 1521(default) and another which i created listener2 listens as 2525
so please help me and let me know where iam going wrong
Thanks in advance ....
with Regards
Kavita

To_char displays different results on sql client and server

Hi,
I am executing the below query on my database with 8.1.7.4 version:
SQL> select to_char(to_date('20-OCT-07'),'D') from dual;
The following result is displayed:
T
7
When the same query is being run through sqlplus client(9.2.0.3) connecting to the same database, following result is being displayed:
SQL> select to_char(to_date('20-OCT-07'),'D') from dual;
T
6
Could anyone please explain me why is this difference and what parameter setting needs to be made to get the same result.
Thanks in advance,
Vishwanath

Or from the territory part of NLS_LANG OS variable :
oracle@xxx:/home/oracle# echo $NLS_LANG
AMERICAN_AMERICA.UTF8
oracle@xxx:/home/oracle# sqlplus '/ as sysdba'
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Oct 22 10:44:59 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
SQL> select to_char(to_date('20-OCT-07'),'D') from dual;
T
7
SQL> quit
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
oracle@xxx:/home/oracle# export NLS_LANG=AMERICAN_FRANCE.UTF8
oracle@xxx:/home/oracle# sqlplus '/ as sysdba'
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Oct 22 10:45:38 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
SQL> select to_char(to_date('20-OCT-07'),'D') from dual;
T
6
SQL>Check it on both sites (client and server).
Nicolas.

Problems enabling nfs client and server

Similar Messages

Maybe you are looking for