Problems enabling perfdump

We tried enabling perfdump, following the instructions in the iPlanet Web Server 4.1 Performance Tuning Guide, but it didn't work.
We modified obj.conf and added a new object with ppath=<document root>/.perf, and Service="service-dump" inside. We then closed with </object>. This new object was put in after the default object closed and we restarted the web server. The .perf file never got created and we don't see anything in the logs. We are running SP9.
Thanks,
Jason

Works for me. Don't expect a .perf file to be created, just check if its working by sending a request to server as
"http://yourhost/.perf". Remember to restart the instance after making the obj.conf change.
Here's my obj.conf entry:
<Object ppath="/export/home/iWS41sp9/docs/.perf">
Service fn="service-dump"
</object>
Thanks
Manish

Similar Messages

"There was a problem enabling iCloud Backup"

I currently have an iPad 2, and my husband has an iPod Touch (not sure of the generation - its about a year old). As of tomorrow, we'll both have iPhone 4S's. We both use my iTuned account for purchasing apps and music. I've finally got iOS 5 up and running on my iPad, with iCloud linked to my iTunes account. I've got my husband's iPod Touch updated with iOS 5. I set it up with his old iTunes account, and put my iTunes account into the 'Store' part of the settings, as the 'Apple IDs and iCloud' document suggested to do. But when I try to set his iPod Touch to backup to iCloud, I get the following error: "iCloud Backup Failed. There was a problem enabling iCloud Backup."
Any suggestions? Am I misunderstanding how I'm supposed to be doing this? It's not a huge deal with the iPod Touch, but I want to get this figured out before tomorrow, so that I can set it up so that my iPad and iPhone both sync to one iCloud account, and his iPod Touch and iPhone sync to a different one.

@uzagaku yes this works, and that's the only way to re-enable iCloud backup actually. No need to disable encryption, that's only for further local backups. But thanks for pointing out to that iCloud setting in iCloud .. I should have looked there immediately, obviously. As soon as it's activated there, the setting syncs on iOS. Remains that enabling iCloud backup from iOS should of course be possible, so there's still a huge bug there.

Help please, im having big problems enabling wifi sync

Hi everyone,
Im having problems enabling wifi-sync between my Windows PC (Windows 7 - iTunes 11.0.4) and my iPhone 4S (Running iOS 6.1.3)
iTunes lets me check the box "Sync This Phone over WiFi" and when i click Apply - Then Sync the box stays checked but when I look on my iPhone on Settings > General > iTunes Wifi Sync it just still says "To enable Wi-Fi Syncing with iTunes, connect to iTunes on your computer using a cable and click "Syncwith this iPhone over Wi-Fi"."
I have checked that both iphone and PC are connected to same WiFi network, and have tried a FW restore on the iphone and neither have solved the problem. I have also authorised my computer to my apple ID.
Im getting to the end of my tether with this issue now, its strange because my wifes iPod Touch will sync over wifi flawlessly (Same PC, different user account)
Please help if you can...
Regards

Yes, i have been clicking APPLY and then SYNC and then finally "ejecting" the iphone frmo within itunes before i dis-connect it. Its a very odd problem.

Back up error: "There was a problem enabling iCloud Backup."

Keep getting this error when trying to backup iphone 5 to icloud: "There was a problem enabling iCloud Backup."

It looks like you need to install iOS 6.0.1 that was released yesterday. You can find more information here: http://lighthousetechnologies.com/blog/software-testing-iphone-5-bug-upgrade
Khanh-Thy
Lighthouse Software Testing
www.lighthousetechnologies.com

There is a problem enabling iCloud Backup. Anyone knows what to do?

There is a problem enabling iCloud Backup. Anyone knows what to do?

Found a solution
https://discussions.apple.com/message/16343143#16343143

HT1766 There was a problem enabling icloud backup

Everytime I try to turn on icloud on my 4s so I can backup my contacts to restore to my new iphone5
it tells me there was a problem enabling icloud backup.

It is saying cannot load storage plan as well

Re: There was a problem enabling iCloud Backup

Why do repeatedly get this message when trying to turn on iCloud Backup on my iPad: There was a problem enabling iCloud Backup?

You really do have to sync after enabling iCloud on the device in iTunes. I just clicked Apply after enabling iCloud and it gave the error in the thread title. Went back to my PC, disabled it, synced, enabled it, synced, then synced to iCloud from the device and it worked a treat.

"There was a problem enabling FileVault." Error Message.

After several attempt trying to enable the filevault on the newly fresh nstalled Mac OS X Mountain Lion, the same error messages appears:
There was a problem enabling FileVault.
Problems were encountered with the disk “Mac HD”. Please turn off FileVault, verify and (if necessary) repair the disk with Disk Utility, and try enabling FileVault again.
Each time I've done the followings:
1. I've turned FileVault off.
2. I've erased all partitioned on my hard disk drive, using the USB disk containing the installation files of Mac OS X Mountain Lion.
3. I've created a single Mac OS X Journaled, non-Encrypted partition using the disk utility and instaled the OS on it.
4. I've followed the initial proccess of the newly installed OS by entering the WiFi credentials, AppleID and password and ...
5. I've restarted the system after first boot.
6. I've just enabled the FileVault after logging in without running any application or plugging any device or even using the system for about 6 hours!
But every time the same error occoured.
My system hardware specifications are as follows:
MacBook 13-inch, Aluminum, Late 2008
Model Identifier:          MacBook5,1
Processor: Intel Core 2 Duo 2.4 GHz 3 MB L2 Cache
Memory: 2x4 GB 1333 MHz DDR3
Graphics: NVIDIA GeForce 9400M 256 MB
Misc:
Boot ROM Version:          MB51.007D.B03 / SMC Version (system):          1.32f8 / Sudden Motion Sensor State:          Enabled
HDD: 500.11 GB TOSHIBA MK5065GSX Revision: GJ003A
Native Command Queuing:          Yes / Queue Depth:          32
Removable Media:          No / Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          5400 / Medium Type:          Rotational
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
disk0s1:
Capacity:          209.7 MB (209,715,200 bytes) / BSD Name:          disk0s1 / Content:          EFI
disk0s2:
Capacity:          499.25 GB (499,248,103,424 bytes) / BSD Name:          disk0s2 / Content:          Apple_CoreStorage
Recovery HD:
Capacity:          650 MB (650,002,432 bytes) / BSD Name:          disk0s3 / Content:          Apple_Boot
Please Help!

It looks like you need to install iOS 6.0.1 that was released yesterday. You can find more information here: http://lighthousetechnologies.com/blog/software-testing-iphone-5-bug-upgrade
Khanh-Thy
Lighthouse Software Testing
www.lighthousetechnologies.com

Problems enabling nfs client and server

I just re-build a solaris 11.1x86 on a x4640 SunFire
Have problems enabling nfs
First i typed the following command:
# svcs network/nfs/server
disable
Second I typed the following command:
#svcadm enable network/nfs/server
# svcs network/nfs/server
offline
did this 3 or 4 times without success...
any ideas?
I holding production here! Please help!!

Let's rule out the easier stuff first...
Do you have something shared?
I think you need to have something shared before you can enable the nfs server service.
Or, if you share something, the service is started automatically. See below.
Thanks, Cindy
# svcs -a | grep nfs
disabled Feb_26 svc:/network/nfs/client:default
disabled Feb_26 svc:/network/nfs/server:default
disabled Feb_26 svc:/network/nfs/rquota:default
# svcadm enable svc:/network/nfs/server:default
# svcs | grep nfs
disabled 13:51:52 svc:/network/nfs/server:default
# zfs set share.nfs=on rpool/cindy
# share
rpool_cindy /rpool/cindy nfs sec=sys,rw
# svcs | grep nfs
online Feb_26 svc:/network/nfs/fedfs-client:default
online Feb_27 svc:/network/nfs/status:default
online Feb_27 svc:/network/nfs/cbd:default
online Feb_27 svc:/network/nfs/mapid:default
online Feb_27 svc:/network/nfs/nlockmgr:default
online 13:52:35 svc:/network/nfs/rquota:default
online 13:52:35 svc:/network/nfs/server:default

Problem enabling SSL on a MQSeries Adapter

I'm trying to enable SSL and so far these are the steps I've done:
- I've been using the DemoIdentity.jks and DemoTrust.jks files located under <MIDDLEWARE_HOME>\wlserver_10.3\server\lib for all my certificate operations.
- I created a PrivateKey and imported it to my DemoIdentity store, created a certificate request and when I got the response imported it back using the same alias. Something I want to highlight here is that when I created the PrivateKey I left the password field empty so it supposed inherit the keystore's.
- I also imported the CA cert into the DemoTrust.jks
My MQAdapter is all set and when I used it with no SSL it was working just fine so I think I have the problem isolated.
Anyway, now when I try to connect this is what I'm getting in the logs:
at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAConnectionMa
nager$JCAConnectionPool.createJCAConnection(JCAConnectionManager.java:1335)
... 59 more
Caused by: java.security.UnrecoverableKeyException: Cannot recover key at sun.security.provider.KeyProtector.recover(KeyProtector.java:311)
at sun.security.provider.JavaKeyStore.engineGetKey(JavaKeyStore.java:121
at sun.security.provider.JavaKeyStore$JKS.engineGetKey(JavaKeyStore.java
:38)
at java.security.KeyStore.getKey(KeyStore.java:763)
at com.sun.net.ssl.internal.ssl.SunX509KeyManagerImpl.<init>(SunX509KeyM
anagerImpl.java:113)
at com.sun.net.ssl.internal.ssl.KeyManagerFactoryImpl$SunX509.engineInit
(KeyManagerFactoryImpl.java:48)
at javax.net.ssl.KeyManagerFactory.init(KeyManagerFactory.java:239)
at oracle.tip.adapter.mq.ManagedConnectionImpl.setupSSLSocketFactory(Man
agedConnectionImpl.java:670)
Googling this it seems like it's a problem with the keystore and private key passwords being different but I changed the private key's to match the keystore (something that I shouldn't be necessary because of the keytool's default behavior when generating the key) with no positive results.
Anyway, any ideas would be really appreciated. I've been spinning my wheels on this issue for 3 days now.
BTW, here's I'm using Oracle SOA11g.

What are the steps you are doing to create a FlexConnect WLAN
Check wether you have done this
1. You should havee a flexconnect mode AP in your network
2. That AP should connect via a trunk link back to your switch port
3. Under "FlexConnect" tab of that AP configuration you need to map required vlans where native vlan should be the AP managment in this trunk (AP connected Switch port)
4. Under WLAN advanced settings, you have to enable "Local Switching" if you want to do local switching. Leave it untick if you want to do central switching.
This is some of my notes when I did this on a WLC 7.0.116.0 (feature was called H-REAP in that time & later modified to FlexConnect). This should help you as well
http://mrncciew.com/2013/03/10/h-reap-modes-of-operation/
HTH
Rasika

Problems enabling editing of parameters for effects in Captivate 5

Has anyone managed to successfully implement the instructions in:
Creating custom effects in Adobe Flash
To enable editing of parameters:
http://help.adobe.com/en_US/captivate/cp/using/WSedb8e841cbc0b7966f3767e7127e259e115-8000. html
I have tried and the values of the parameters are not read. For example, I created my own version of Fly In From Bottom Right.xml to allow customization of the x value:
<Motion duration="60" xmlns="fl.motion.*" xmlns:geom="flash.geom.*" xmlns:filters="flash.filters.*">
    <source>
        <Source frameRate="30" x="274.95" y="163.95" scaleX="1" scaleY="1" rotation="0" elementType="movie clip" symbolName="Text caption">
            <dimensions>
                <geom:Rectangle left="-87.95" top="-32" width="175.95" height="64"/>
            </dimensions>
            <transformationPoint>
                <geom:Point x="0.5" y="0.5"/>
            </transformationPoint>
        </Source>
    </source>
    <effect_config effect_type="motion_path">
          <config_item>
        <effect_property type="number" propertyvalue="MY_X" defaultvalue="100"></effect_property>
          </config_item>
        </effect_config>
    <Keyframe index="0" tweenSnap="true" tweenSync="true" x="MY_X" y="600">
        <tweens>
            <SimpleEase ease="0"/>
        </tweens>
    </Keyframe>
    <Keyframe index="59" x="0" y="0"/>
</Motion>
This is successfully parsed but the value is not taken into account in the animation. It seems to be set to 0, regardless of what I set it to in the XML and Captivate shows the property as editable but no matter what you enter it does not accept it and returns to 0.
Any help with this would be much appreciated.
Thanks in advance,
David

Good Day fellow forum users,
I'm having the same problem with this that David has. It doesn't matter what parameter I change the animation behaves exactly the same.
I am attempting to have an image fly out left however, the image only partially 'leaves the screen'. I have the effect tied to a button in an attempt to give my learners a way to change from one 'monitor screen' to another. If I click the button twice the image will fully leave the screen.
I would rather accomplish this effect with a single button press.
I could just build this in Flash (and ultimately will do so) but if I can accomplish it within Cp that would be great. The rest of my team isn't Flash savvy and I would like to have everyone able to edit the final product if necessary.
Any suggestions are appreciated.
Norm

Problem enabling Verbose GC in Hyperion services

In the Windows environment, we have for Hyperion, we start and stop Hyperion services through Microsoft Services application. So in this Microsoft Services application, we are referring to Hyperion delivered .exe files which start or stop the service based on users request. These .exe files do not refer to any of the webblogic configuration files during startup, they just invoke their configurations from the .exe file. Also Oracle only delivers .exe files for those services and no code related to building those .exe files.
Now my problem is that, I have to enable verbose GC for all the services so we can use that information for debugging OutOfMemory issues. For enabling verbose GC, I have added necessary commands in setDomainEnv.cmd file, but those changes arent getting picked up becuase when we start those services, it refers to the .exe file and that does not invoke any of the web server configuration files. So can you please tell me, how Oracle builds those .exe file and how to embed the Verbose GC commands into those files and build the new .exe file which we can refer to for start/stop the service.
I appreciate you taking time to read this and please throw any ideas or question you have for me.
Thanks,
Chaitanya Kosaraju

Hi John,
I'm getting the below error when I have OOM issue, can you please let me know what exactly is causing the issue
####<Sep 10, 2012 11:02:56 AM PDT> <Critical> <WorkManager> <P01APW290> <AnalyticProviderServices0> <weblogic.timers.TimerThread> <<WLS Kernel>> <> <> <1347300176948> <BEA-002911> <WorkManager weblogic.kernel.System failed to schedule a request due to java.lang.OutOfMemoryError: nativeGetNewTLA
java.lang.OutOfMemoryError: nativeGetNewTLA
     at weblogic.work.SelfTuningWorkManagerImpl.getWorkAdapter(SelfTuningWorkManagerImpl.java:252)
     at weblogic.work.SelfTuningWorkManagerImpl.schedule(SelfTuningWorkManagerImpl.java:148)
     at weblogic.timers.internal.TimerManagerFactoryImpl$WorkManagerExecutor.execute(TimerManagerFactoryImpl.java:133)
     at weblogic.timers.internal.TimerManagerImpl.execute(TimerManagerImpl.java:622)
     at weblogic.timers.internal.TimerThread$Thread.run(TimerThread.java:277)
>
####<Sep 10, 2012 11:02:56 AM PDT> <Error> <Kernel> <P01APW290> <AnalyticProviderServices0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1347300176962> <BEA-000802> <ExecuteRequest failed
java.lang.OutOfMemoryError: mmAllocArray - Object size: 16, Num elements: 0.
java.lang.OutOfMemoryError: mmAllocArray - Object size: 16, Num elements: 0
     at java.lang.Class.getDeclaredMethods0(Native Method)
     at java.lang.Class.privateGetDeclaredMethods(Class.java:2427)
     at java.lang.Class.getDeclaredMethod(Class.java:1935)
     at java.io.ObjectStreamClass.getInheritableMethod(ObjectStreamClass.java:1349)
     at java.io.ObjectStreamClass.access$2200(ObjectStreamClass.java:52)
     at java.io.ObjectStreamClass$2.run(ObjectStreamClass.java:448)
     at java.io.ObjectStreamClass.<init>(ObjectStreamClass.java:413)
     at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326)
     at weblogic.common.internal.WLObjectOutputStream.writeObjectWL(WLObjectOutputStream.java:100)
     at weblogic.cluster.MulticastManager.timerExpired(MulticastManager.java:759)
     at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Nightly for android reflow problems: enabling reflow on zoom, disabling double tap zoom?

In the current Nightly for Android build:
1) Page loads, but the font size is tiny
2) Double tapping always zooms in to the same zoom level
3) Zooming out from maximum zoom reflows back to minimum zoom reflow
4) No way to reflow for anything between maximum and minimum size
So, is there a way to...
a) Re-enable reflow on zoom, always reflowing the page to the appropriate zoom level
b) Disable double-tap zooming, also allowing text reflow for any zoom level?

I have this exact same problem with the Nightly Android build, but I cannot for the life of me find the Accessibility settings. Could you please tell me how to get to the Accessibility settings?

Problems enabling FileVault

Hi,
When enabling FileVault2 on my Mid-2012 MacBook Pro with 10.9.3 I received an error.
After that I completely installed the system new, created a new partition, etc. Right after the installation of Mavericks was completed, I tried enabling FileVault again. Couple of hours later during the encrypting process, I received the identical error.
Disabling of FileVault also terminates in an Error:
Is this a known issue? I also tried it with a smaller partition, but doens't matter if I use the full disk or half of the disk. It will always occurs the same error.
Regards
Niels

Update:
On a hunch that the problem was somehow with a configuration related to the login screen, I went into the Users & Groups preferences, under Login Options, and turned off everything. I set the login window display to "Name and password" instead of "List of users". Then I went back to the FileVault preferences and turned it back on. I followed the steps and restarted the computer.
It rebooted and spun on a grey screen for awhile.
Then it rebooted again, right back to the non-encrypted login.
I logged in and checked the FileVault preferences. It indicated that encryption was off, even though I had just turned it on. Odd. So I turned it on again, restarted, etc. THIS TIME, it booted correctly to the encryption login, with none of the weirdness of before, and FileVault's preferences indicated that it is in the process of encrypting.
I'll keep an eye on this for a day or two. If it seems resolved, I'll mark this resolved.

There was a problem enabling icloud backup (settings crashes)

I have an iPhone 4S with IOS 7.1.2 and i've been able to backup my phone prior to updating to IOS8.
After installing IOS 8 my phone became really slow and unusable and I went back to iTunes and did a full restore.
I've been able to get everything working again except the iCloud backup.
It was enabled after a fresh install but never actually backed anything up:
"there was a problem with icloud backup" and a daily backup is never performed.
The phone is fully charged
Connected to wifi
Whenever I try to backup manually it also fails.
I tried to disable icloud backup and enable it again but that didn't work either as now SETTINGS crashes everytime I enable the icloud backup setting.
any suggestions?

Make sure to change your backup selection in iTunes to icloud...you can't backup your phone to icloud unless iTunes is set to icloud.

Problems enabling perfdump

Similar Messages

Maybe you are looking for