Problems entering 63 character wpa2 key

Hello all,
Everytime I try and enter my key in my Lumia 520, it decides to try the password before I have finished typing.
I have been able to successfully complete it once but it then could not connect.
When added a key to a PC I can copy and paste it from a txt file. Does a Win8 phone provide this functionality, as it would make life extremely easier?

Thanks - I will change the `
However I would still like to check if there is an alternative to entering the key 'manually' on the iTouch. Entering a 63 digit key (with numbers, upper/lower case letters and symbols) is tough and likely to be error prone. It would be much easier if I could enter the key while iTouch was docked to iTunes - is this not possible?

Similar Messages

I bought the adobe photoshop elements 13 and adobe premiere elsements 13 in box in the store for my Mac; I've entered my 25 character product key - now I have been waiting for nearly an hour for something to happen with no luck. Ron

I bought the adobe photoshop elements 13 and adobe premiere elsements 13 in box in the store for my Mac;
I've entered my 25 character product key - now I have been waiting for nearly an hour for something to happen
with no luck. Has anyone else had this problem? I'm using MacBook Pro with Yosemite OS 10.10 etc. Help!
Ron in Fort Worth, TX

Also, Elements programs are not part of the Cloud
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Premiere Elements Forum http://forums.adobe.com/community/premiere_elements

Recover the 25 character product key on the PC

While on Outlook 2013, I get following message: We have run into a problem with your office 365 subscription and need your help to fix it. When I clicked on it, it brought me to online store to purchase the Office. When trying to purchase Office online, it asks to provide them with 25 character Product Key off the computer box, which I do not have.
Please let me know what do I have to do in order ro eliminate coming message. Do I have to purchase Office at all? If so, where: at the store or online? But for that I need that key.
Can you help?
Please advise.

When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
How did you acquire Office 365??? Was Office 365 purchased with your computer and is it a fully licensed version or a trial version??? Or did you purchase Office 365 from a local or online retailer???
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Installed Windows 8 on a late 2011 MacBook Air and was working fine now keyboard not working so cannot enter password? Caplocks key works but I am locked out on my own PC and cannot seem to get it to recognize built in keyboard,bluetooth,generic USB one.

Installed Windows 8 on a late 2011 MacBook Air and was working fine now keyboard not working so cannot enter password? Caplocks key works but I am locked out on my own PC and cannot seem to get it to recognize built in keyboard,bluetooth,generic USB one.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Identify InfoObjects that have a non-7-bit-US-ASCII character in key

Hello,
we plan to do a Unicode migration with our BW. SAP recommends, that in order to prevent problems during data extraction all keys of the characteristic InfoObjects should only contain 7-bit-US-ASCII characters.
But we have manually (by hazard) identified some master data records that contain some non-7-bit-US-ASCII characters (like for example "Ö" or "Ä").
We'd now like to check ALL characteristic InfoObjects regarding this issue.
Does anybody know about an ABAP-Report that would ease that task? Generally spoken, the programm should walk through the list of all characteristic InfoObjects and check for each one the master data table for "bad" keys (i. e. keys that contain a non-7-bit-US-ASCII character).
Thanks to any answers in advance!
Best regards,
Philipp

I tested your code today,
                     dialog           save           open
Firefox 1.5          OK                 OK               OK
IE 6.0                OK                 OK                NGdailog: filename show in download popup dialog
save: save to disk from dialog
open: open directly from dailog

Problem in generating the Primary Key

Hi All ,
I am trying to persist an object and also generating the primary key using a default sequence . But the problem is that the Primary key is getting incremented by 2 instead of 1 . My code looks like this :
import java.util.HashMap;
import javax.persistence.EntityManager;
import javax.persistence.EntityManagerFactory;
import javax.persistence.EntityTransaction;
import javax.persistence.Persistence;
import javax.persistence.PersistenceContext;
import javax.persistence.PersistenceContextType;
import javax.persistence.PersistenceUnit;
public class entityCaller {
//     @PersistenceContext(unitName="testApp" ,type=PersistenceContextType.EXTENDED)
     EntityManager em;
//     @PersistenceUnit(unitName="testApp")
     EntityManagerFactory emf ;
     public void persistEntity( String Name , int Age ) {
          EntityManagerFactory emf =
          Persistence.createEntityManagerFactory("testApp", new HashMap());
          em = emf.createEntityManager();
          EntityTransaction entityTransaction = em.getTransaction();
     Tab1 oBJTab1 = new Tab1();
//      oBJTab1.setId(Age);
     oBJTab1.setVal(Name);
          try{
               System.out.println("Making object");
               em.persist(oBJTab1);
               System.out.println("Done");
               System.out.println("Making object2");
               System.out.println("Entered the Values");
          }catch (Exception e) {
               e.printStackTrace();
          }finally{
          em.close();
     public static void main(String[] args) {
          entityCaller caller = new entityCaller();
          caller.persistEntity("DoAgain7",2);
My persistence.xml looks like this :
<?xml version="1.0" encoding="UTF-8"?>
<persistence xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.0" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="testApp">
<provider>oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider</provider>
<class>Tab1</class>

<properties>

<property name="toplink.jdbc.driver" value="oracle.jdbc.driver.OracleDriver"/>
<property name="toplink.jdbc.url" value="jdbc:oracle:thin:@127.0.0.1:1521:XE"/>
<property name="toplink.jdbc.user" value="system"/>
<property name="toplink.jdbc.password" value="jlkklkj"/>


</properties>
</persistence-unit>
</persistence>
Please provide me with some pointer as to know where the things are going wrong.

If you generated your original schema using toplink.ddl-generation, then later dropped it and created it then you should keep in mind the sequence table does not get dropped. This can lead to an initially 'empty' database with a PK sequence starting at '2' if you have one persistence unit and one entity. Can you steadily duplicate this or did you just notice that your persist started with an key of '2'? Just a thought.

Keep getting: Bad key or directory name: "/desktop/gnome/url-handlers/GMT+01/command": `+' is an invalid character in key/directory names.

Keep getting the following warning from TB:
Bad key or directory name: "/desktop/gnome/url-handlers/GMT+01/command": `+' is an invalid character in key/directory names
Bad key or directory name: "/desktop/gnome/url-handlers/GMT+01/command": `+' is an invalid character in key/directory names
Running Scientific Linux 6.5 with all updates applied. Have restarted TB and still getting the above error message.
Application Basics
Name: Thunderbird
Version: 24.3.0
User Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.3.0
Profile Directory: Open Directory
(Local drive)
Application Build ID: 20140204141004
Enabled Plugins: about:plugins
Build Configuration: about:buildconfig
Crash Reports: about:crashes
Memory Use: about:memory
Mail and News Accounts
account1:
INCOMING: account1, , (none) Local Folders, plain, passwordCleartext
account2:
INCOMING: account2, , (imap) mutilate.local.davenjudy.org:143, alwaysSTARTTLS, passwordCleartext
OUTGOING: mutilate.local.davenjudy.org:25, plain, none, true
account5:
INCOMING: account5, , (imap) mutilate.local.davenjudy.org:143, alwaysSTARTTLS, passwordCleartext
OUTGOING: mutilate.local.davenjudy.org:25, plain, none, true
Extensions
Disable "You", 1.1, true, {79F88CCE-DC6B-11DE-A153-58A455D89593}
Important Modified Preferences
Name: Value
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
dom.max_chrome_script_run_time: 0
extensions.lastAppVersion: 24.3.0
gfx.blacklist.direct2d: 4
gfx.blacklist.layers.direct3d10: 4
gfx.blacklist.layers.direct3d10-1: 4
gfx.blacklist.layers.direct3d9: 4
gfx.blacklist.layers.opengl: 4
gfx.blacklist.stagefright: 4
gfx.blacklist.suggested-driver-version: <Anything with EXT_texture_from_pixmap support>
gfx.blacklist.webgl.angle: 4
gfx.blacklist.webgl.msaa: 4
gfx.blacklist.webgl.opengl: 4
mailnews.database.global.datastore.id: 9e7fa03a-eac3-4c8e-9c6c-9017d15eb61
mail.openMessageBehavior.version: 1
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1393313146
places.history.expiration.transient_current_max_pages: 104858
plugin.importedState: true
plugin.soname.list: libXt.so
print.printer_CUPS/ML-1210.print_command: lpr
<Dwleted printer info to coserve space>
privacy.donottrackheader.enabled: true
Graphics
Adapter Description: X.Org -- Gallium 0.4 on AMD RS880
Vendor ID: X.Org
Device ID: Gallium 0.4 on AMD RS880
Driver Version: 1.4 (2.1 Mesa 9.2.0-devel)
WebGL Renderer: Blocked for your graphics card because of unresolved driver issues.
GPU Accelerated Windows: 0. Blocked for your graphics card because of unresolved driver issues.
AzureCanvasBackend: cairo
AzureFallbackCanvasBackend: none
AzureContentBackend: none
JavaScript
Incremental GC: 1
Accessibility
Activated: 0
Prevent Accessibility: 0
Library Versions
Expected minimum version
Version in use
NSPR
4.10.2
4.10.2
NSS
3.15.3
3.15.3 Basic ECC
NSS Util
3.15.3
3.15.3
NSS SSL
3.15.3
3.15.3 Basic ECC
NSS S/MIME
3.15.3
3.15.3 Basic ECC

Looks like there is a key that isn't getting deleted when an account is deleted. I thought I had resolved the error message problem by removing my wife's account from my Thunderbird instance. Haven't seen it since the above post. Just got it again:
Bad key or directory name: "/desktop/gnome/url-handlers/GMT+01/command": `+' is an invalid character in key/directory names
Bad key or directory name: "/desktop/gnome/url-handlers/GMT+01/command": `+' is an invalid character in key/directory names
Weird.
Cheers,
Dave

Unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code

unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code. i don't believe mac allows for input on job code or printer code for permission to print

I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist.

JMX: Invalid character '*' in key part of property

Hi:
While trying to retrieve the model mbean attributes, I am seeing
the following exception --
javax.management.MalformedObjectNameException: Invalid character '*' in key part of property
at javax.management.ObjectName.construct(ObjectName.java:459)
at javax.management.ObjectName.<init>(ObjectName.java:1304)My ModelMBean extends the DefaultModelMBeanProvider class.
The mbean is registered correctly with the mbean server, i notice the succesful registration when i deploy the application to the application server.
The following code registers the mbean programmatically with the mbean server
ObjectName name = null;
name = new ObjectName(":type=myManager,name=myConfig");
// register MBean. It is registered under a domain
// named after the application that registered it
factory.registerMBean(name, <instance of the mbean class>)
Now, to retrieve the attributes of the mbean, I am querying for my MBean using the following API
ObjectName oname = SDKJMXUtil.queryName(mgmt, new ObjectName(appName+":type=myManager,name=myConfig, *"), null);
where
SDKJMXUtil.queryName(....) is ..
* Perform a JMX query for a single MBean and return the
* ObjectName of the MBean. <p> Throws an IASException if the
* query fails, or if conn is null, or if the number of mbeans
* returned in the query result is not one.
* @param conn JMXConnection used to perform query
* @param oname The ObjectName used in query
* @param exp The QueryExp used in query (can be null)
* @throws IASRuntimeException if there was an error querying the MBeans, or if 0 or multiple MBeans were found.
public static ObjectName queryName(JMXConnection conn, ObjectName oname, QueryExp exp)
Set objects;
try
objects = conn.queryNames(oname, exp);
catch (IOException e)
throw new IASRuntimeException("Error performing JMX query",
IASErr.class.getName(),
IASErrID.JMX_QUERY_ERROR,
e);
if (objects == null || objects.size() < 1)
throw new IASRuntimeException("MBean not found",
IASErr.class.getName(),
IASErrID.MBEAN_NOT_FOUND,
null);
else if (objects.size() > 1)
throw new IASRuntimeException("More than one MBean found",
IASErr.class.getName(),
IASErrID.TOO_MANY_MBEANS_FOUND,
null);
return (ObjectName)objects.iterator().next();
Please let me know why I am sesing the javax.management.MalformedObjectNameException: Invalid character '*' in key part of property exception.
Thanks much.
-NB.

Hi,
There's a forum dedicated to JMX - You can subscribe
to this JMX-FORUM from here: http://archives.java.sun.com
Concerning your question please see below:
Hi:
While trying to retrieve the model mbean attributes,
I am seeing
the following exception --
javax.management.MalformedObjectNameException:
Invalid character '*' in key part of property [...]
new ObjectName(appName+":type=myManager,name=myConfig, *")The problem is that's there is a white space ' ' between ',' and '*'.
There are no delimiter characters in JMX ObjectName ' ' has no
special meaning and isn't ignored - so ' *' is interpreted
as being a key containing a white space and a star. Star is a special character
which can't be part of a key, hence the MalformedObjectNameException.
Try with:
new ObjectName(appName+":type=myManager,name=myConfig,*")
and it should work.
Hope this helps,
-- daniel
http://blogs.sun.com/roller/page/jmxetc
Please let me know why I am sesing the
javax.management.MalformedObjectNameException:
Invalid character '*' in key part of property
exception.

Nokia E71 - How do you enter a HEX WPA Key?

Hi All,
I have WiFi at home and I typed my ASCII Network Key in when connecting to the network and it worked perfectly.
At work I have WiFi and a 64 digit hexadecimal 256 bit Network key and I can't seem to be able to enter it when asked for the network key...After playing around with the different options i was able to enter a maximum of only 63 characters.
I don't have the ASCII passphrase, so i need to make the hex key work.
How do I enter a Hex Key, has anyone done this... help please.
hex key:
5b6690d71850c17e4c0d7c0bee242fa06ddd706dc4b416a07d39b6d1252d11b6
Thanks
Message Edited by yuiou on 12-Jun-2009 08:50 PM

Fortunately I was able to resolve my problem and I learned something about WPA keys in the process. In my case, I originally retrieved the key from my laptop using a utility. It displayed the 256 bit key as a 64 hex characters. It turns out there was a typable ASCII key that worked. The reason the hex key couldn't be translated to typable ASCII characters is that it is actually a 256 bit hash calculated from the 63 byte ASCII key combined with the SSID. The E71x apparently supports entering the key either as the 63 byte ASCII key or as its 256 bit hex hash. If I understand correctly, the latest implementation of WPA specifies an ASCII key converted to a 256 bit hash but earlier versions allowed entering a 256 bit key directly as hex. I guess the latest implementation makes sense since hashing the key makes it less vulnerable to a dictionary attack, but it would be nice if the E71 supported entering the the key as hex.

Wpa2 key works on 1 out of 3 computers

hello. WRT54GC. 1 vista laptop with built in wifi and 2 desktops with USB wi-fi adapters, xp sp2. maybe 3.
went to IP address and entered router setup. changed to wpa2 and put in password. on the laptop, searched for new wi-fi connections, it found the router, entered the password and everything worked. On the desktops, searched for new wi-fi connections, found router. it asks for the wpa2 key and it doesnt accept it. will not connect. i go back into router set up, make it an open connection, then i can connect with both desktops. any suggestions. thanks.
bushwacker
Solved!
Go to Solution.

If you cannot use WPA2 then use WPA instead. Do not use WEP. WEP is almost as good as no security. It is easily cracked.
On the router, select "WPA2 Mixed Mode" or "WPA2 Personal" and then choose AES+TKIP for encryption. (The exact way depends on your firmware on the router). Then enter a good passphrase.
On the computer select WPA-PSK and enter the same passphrase. See if you can connect now.
If not, select "WPA Personal" on the router with a good passphrase. Same settings on the computer. This should work now.
WPA is much better then WEP. Do not use WEP unless absolutely necessary. If you use WEP you have to enter the first key from the router on the computer. However, with WEP be prepared that someone may be able to hack into your network. Do not have any confidential private information on any computer connected to a wireless router protected only by WEP.

Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load wit

Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load with the USB but do not load the battery me the icon of the battery appear and below of her the beam that indicates that this being loaded but this way I have left it the whole yesterday and what goes of today and continues without loading anything! They can help me porfavor I am grateful for them to him very much! And my PC does not detect it not itunes

Try the not-charging topic of:
iPod touch: Hardware troubleshooting
It could be that the battery is dead.

I have Adobe LiveCycle installed on my computer, and I am upgrading my computer, how do I install LiveCycle on my new computer so I can enter in my product key?

I have Adobe LiveCycle installed on my computer, and I am upgrading my computer, how do I install LiveCycle on my new computer so I can enter in my product key?

Live Cycle installation doesn't require any product key.

Problem in the character conversion

Hi Guys,
I am facing problem in the character conversion
I am posting data from SAP to third party system using XI , by converting whole input message to a String .I am using SOAP adapter to communicate XI to third party system.
Thirdparty system needs String to be wrapped in CDATA so that it will not choke by looking at the special characters. I did Wrap the output string in CDATA, using ABAP mapping but when I do that XI is converitng arrow brackets < and >. into &lt and u2018&gtu2019 my assumption is it is double encoding.
example -
before map - <AppSystemInfo>
after mapping it is converted as - <![CDATA[ &ltAppSystemInfo&gt]]>
Edited by: Vamsi on Jun 17, 2010 10:00 PM
Edited by: Vamsi on Jun 17, 2010 10:01 PM

Did you try to see the output?
bcz if you are trying this in mapping testing it will show you like this as this conversion if for xml, so xml will not do anything wrong with the special characters, so for that special characters will be converted like that.
Once try to run end to end interface and try to see at receiver side that how data looks like.
Thanks,
Hetal

URGENT Problem with Greek Character from an Oracle database

Hello, I am having a serious and urgent problem with the character settings of an oracle database (8.1.7). The database is sitting in a solaris unix server and when we run the env command we have the following in the NLS_LANG parameter: AMERICAN_AMERICA.WE8ISO8859P1 (I do not know if this is helpful). When I retrieve data from oracle database (through a VB.NET 2005 program)to a dataset I use a special font in order to see the greek characters (HELLASARIAL). But when I am trying to save these data to a TXT file the greek characters are like Chinese to us. I tried several encodings (System.Text.Encoding.GetEncoding(869)) but without success. Can someone tell me how to convert the oracle greek characters during the selection or during the saving to the TXT file?
Please respond as fast as you can.
Thanks in advance

Here is the answer of the microsoft:
I have the information that you have a VB.Net 2005 application connected to an Oracle database 8.1.7.4 hosted on a UNIX server.
This database has the CharacterSet WE8ISO8859P1.
When retrieving Greek characters from this database in the application, you cannot see them.
Could you please send me a screenshot of these characters in the .Net application?
Are they displayed as gibberish, or as inverted questions marks (?)?
I already had similar cases with Hebrew characters hosted on an Oracle database.
These characters were displayed as questions marks on the client side.
This is due to the fact that System.Data.OracleClient is using the Server CharacterSet to display the characters.
If your Greek characters are not stored in the WE8ISO8859P1 characterset, then they won’t display correctly on the client-side.
This is different from OLEDB where you could interact on client side by modifying the NLS_LANG parameter in the registry HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0.
The client NLS_LANG and the server CharacterSet had to match in order to correctly display the data, and avoid SQL*NET conversion.
So there are two solutions to your case:
- The first one is to create a new database using the P8 characterset. The Oracle .Net managed provider will so be able to use it and display the characters correctly.
- The second one is to use the OLEDB.Net managed provider, and then use OLEDB for Oracle provider. OLEDB will take care of the client NLS_LANG registry parameter.
Would it be possible to test your application against an Oracle database with WE8ISO8859P8 characterset?
Would it be possible to test it with the OLEDB .Net managed provider, and after checking the NLS_LANG client registry parameter?

Problems entering 63 character wpa2 key

Similar Messages

Maybe you are looking for