Problems exporting files using xFire video clips

Hi - first time posting.
I recently started using XFire to record videogame footage from my PC. I would then take the clips into Adobe Premiere Pro CS6 and edit them, and now I'm ready to export them so I can re-edit them (because editing with the xfire codec is quite a hassle) and ultimately upload them.
In this particular example, I'm exporting to the HuffYUV format - this is what happens: http://www.youtube.com/watch?v=_jHBhpl_3G0
This clip is 90 seconds long, exported in the HuffYUV codec, 360x240 (to keep the file size down) - but as you can see, at around 0:54 and then again at 1:15, the video would freeze, rendering the clip unuseable.
I've tried various formats and sizes - I'm trying to export at 1440x960, and I've tried HuffYUV, Lagarith, Raw (No Codec), MicrosoftVideo1, etc - most of them, when I make a 30sec clip, it works fine, but when I make the 90sec clip, most of them would start having the frozen frames at ~2 seconds in, but all the file formats do eventually have a frozen frames.
I've tried converting the xfire video clips BEFORE putting them into Premiere by using Media Coder (not the Adobe one), but the result looks something like this: http://www.youtube.com/watch?v=p8LEO3fGSaM&t=0m17s - you can see horizontal interference as well as a lot of jumpy frames
I just got this computer a few months ago - I'm using Windows 8, 64-bit, 16gb of ram.
So, what's happening? What's the best way for me to fix this? Thanks in advance.

The most likely reason is that you are attempting to export a muxed mpeg file. QT will not export sound from such files. QT Mpeg Limitations
This freeware will export to a number of different formats from mpeg with the sound and video intact. Mpeg StreamClip

Similar Messages

Can anyone please help me, I'm having problems with sound while watching video clips using flash player using Internet Explorer\

Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer

There's a good chance that this is a known issue. We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/

I'm trying to export a 3 minutes video clip through the Share option and i"m getting "Error compiling movie. Unknown error" announcement.

I Need to export a 3 min. video clip as 1080p50 5.1

DovSolomon
What version of Premiere Elements are you using and on what computer operating system is it running?
What are the properties of your source media and what project preset are you setting to match the properties of your source media?
There is no 1080p50 5.1 project preset in any version of Premiere Elements.
Please see the following for creating your own 1080p50 5.1 project preset and exporting it as 1080p50 5.1.
ATR Premiere Elements Troubleshooting: PE11: Exporting a 1080p50 or 1080p60 file with 5.1 Channel Audio
Let us determine what your sources are, how you are setting up the project, and then we can look microscopically
into the Timeline content for flaw(s) that might be triggering your error message.
We will be watching for your reply.
Thank you.
ATR

Problems with Metadata Set and video clip size... I think....

Ok, I can't figure this one out... any help would be much appreciated.
Background:
I started server using the Video Production default customer profile. Then I created a few new metadata Sets including one called Finished Programs which is a media asset.
Problem:
When I upload a video clip and select the Finished Programs metadata set it always changes to the Media metadata set. Now this only happens when I have used MPEG Streamclip to take the video off of a DVD. If I upload a clip (mov) file that I used in Final Cut Pro it works fine.
My settings in MPEG StreamClip are Apple DV/DVCPRO-NTSC 720x480 Interlaced Scaling and Reinterlaced Chroma.
If I upload two clips at the same time and select Finished Programs metadata set, one that I used MPEG StreamClip and one that I digitized into FCP, it will place two clips in FCPserver, one with the Finished Programs and one with the Media Set.
Any ideas on how to fix this????

Could be. If it's not the metadata it must be something else. You would have to figure it out by trial and error. Maybe you should try giving it the highest priority and maybe turn off all automated scans and see if it works then. just to make sure that nothing intervenes with the process while it is going on and see if you can get it to run fully and see what the outcome is then.
I have files over 1 GB that get attached to the right medadataset. I have failures on thumbnail creation to, but FCSvr then starts the same job over and over till it succeeds.
I have never user MPEG Streamclip clips in FCSvr. Hopefully somebody else has and could share their experiences.

Im using xcode 4.6 and im having problems reading files using the fopen function in c

Im using xcode 4.6 and im having problems reading files using the fopen function in c

Yes, but that would not cause the "build failed" message.
right I missed that part. Looks like two problems then.
// main.m
// ASCTestFopen
// Created by Frank Caggiano on 3/2/13.
// Copyright (c) 2013 Frank Caggiano. All rights reserved.
#import <Foundation/Foundation.h>
#include <stdio.h>
int main(int argc, const char * argv[])
    @autoreleasepool {
        FILE *fp, *fopen();
        // insert code here...
        if((fp = fopen("~/test.txt","r")) == NULL)
            NSLog(@"open failed");
    return 0;
This will compile ad run in Xcode with a project type of comand line tool

Hi i have an apple macbook air, and i have a problem the starting my mackbook air i dont know that whats the problem, i wana share a video clip 4 u see the clip and tell me that what i do or resolve this problem 1st tell me ho can i post hre my video clip

Hi i have an apple macbook air, and i have a problem the starting my mackbook air i dont know that whats the problem, i wana share a video clip 4 u see the clip and tell me that what i do or resolve this problem 1st tell me ho can i post here my video clip ?

Which Mac OS X is installed.
Troubleshooting advice can depend on that information.
Without seeing a video, tell us exactly what happens when you startup your Mac?

Playback problems and video freezes due to plugins being used on video clips?

I am editing with Premiere, and dealing with playback issues and video freezes as I apply plugins to each video clip. Not sure how to fix this problem. I am a mac user, but I cannot upgrade my graphics card, so I am wondering how to fix this issue.

Hi,
More info will be needed to help. Please refer to this post.
http://forums.adobe.com/message/4200840#4200840
Thanks!
Peter Garaway
Adobe
Premiere Pro

Help - Problems exporting my first project - missing clips

Hi all,
I've been a sound engineer for close to 20 years and I'm just finishing my first ever video edit, a project to help my wife. Naturally our deadline is tomorrow morning....
I've got my edit done and it plays perfectly in Final Cut Pro X viewer. When I export in any format (Youtube or just as a file to Quicktime) certain clips do not appear in the exported movie, the audio is there but the video is blacked out. They are the same clips every time.
I imported most of the clips from the same camera, albeit in a few different batches. When I look at the inspector info for some clips that play and some that don't they are exactly the same Codec - H.264, Linear PCM.
Any ideas on what could be causing this?
Thanks,
Ruairi

Try this (might work).
Select one of the offending clips in the storyline and hit Shift+F to find it in the browser.
Hit Cmd+C to copy it.
Create a new project (Cmd+N) and paste the clip in there.
Export the clip with it's current settings, then re-import that clip into the storyline and try your export again.
Does the clip show up?
If so, repeat as necessary.
The only other thing I can think of is to trash your preferences:
Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
Andy

Problems exporting files

I'm new to using Flash (I'm using Flash Professional CS5) and am having problems exporting my files.
While the files will export as .mov files, when I try to play the files they're simply a blank white or black screen.
Any help or ideas on what I'm doing wrong?

The most likely reason is that you are attempting to export a muxed mpeg file. QT will not export sound from such files. QT Mpeg Limitations
This freeware will export to a number of different formats from mpeg with the sound and video intact. Mpeg StreamClip

Problem: Exporting audio, but not video

After exporting my finished movie, some clips are gone but others play just fine. The audio for the missing clips is perfectly intact, but the video is just gone! Instead I get a still image from the previous clip with the missing clip's audio acting as a voiceover. I need to finish this project by next week, so please respond quickly.

Be sure the video clips you are using have the correct codec. I had this problem, re-exported my video using the H.264 codec and it worked find.
Good luck!

How can I make an mp audio file of a video clip that I'm working on in iMovie?

I have a video clip residing within an iMovie project. I want to create an audio file of this to take into Audacity so I can make cleaner audio edits (pulling up audio, deleting extraneous audio, etc) to insert as voice over in my movie project. iMovie is not sophisticated enough to do this. I don't see an easy way to "export as MP3" or other audio file. Am I missing something? Thank you.

Free option - Soundflower (http://cycling74.com/products/soundflower/)
Non-free option - Piezo (available from the AppStore)

Why do I lose video content when exporting/backing up a video clip to DVD in iPhoto?

I am transferring/backing up my iPhoto library to a DVD. When I do this, I see the "content" of any video clip does not transfer. By this I mean I can see the image identifying the clip on the DVD but the "time" is 0:00. Can someone pls advise how to get this content to transfer so I can eliminate these clips from the iMac? Thanks! (I have Mac OS X 10.7.5 and IPhoto 11 9.4.3)

How are you backing up the library? Are you exporting the photos to a DVD or a folder on the Desktop and buring that to a DVD? If so be sure to select Kind = Original in order to get the actual video file.
OT

Why do I get a .jpeg file for every video clip in my library?

When I import video clips from my camera I get two files with the same name but different extension. One is the actual video clip and the other a .jpeg file. Beofre updating to iPhoto 11 I did not get this issue. Are both files really necessary?

Curious.
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Need to determine which project files uses a video file

Short of going through each of my FCP project files one by one, is there any way to find out which of my project files uses a particular video file?
Thanks,
John Link

As long as it has a name you can search for it.
The problem is not to find a media file, it is to find all the project files that use a media file. Thanks, cometmace, for providing a solution to that problem, and welcome to the Apple Discussions.

Is there a problem or bug in locking video clips together?

Hi, I have 3 movie tracks masked with one track underneath all 3 for a total of 4 movie tracks. I seem to be having a problem locking down the 4 video layers so things "added" into my masks match up with the main video track outside the mask(s). I've tried using guides and grids and when I get the center point circular X on the yellow t-bar for all 4 lined up, I click on these 4 tracks and use the object lock feature (in the object menu), but it doesn't seem to "lock" for the duration of my entire edit, which is about 2000 frames.
Any idea what I'm doing wrong?
rita

Hi Kim,
There have never been any reports of bugs or problems with our serial communication VI's with the specific ASCII character "i". Also no reports about that character in general.
1. All the serial VI's are based on VISA, so you can always make sure that you have the latest VISA driver from our website:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=132060_US
2.You say that you have version 6.0? Did you install the 6.0.2 patch? If not, that would be a good idea too. There were some problems with String and Array functions that got fixed.
Download the patch from this link:
http://digital.ni.com/softlib.nsf/websearch/168AAE428563A9E8862569EC005C5856?OpenDocument&node=132070_US
3. What do yo
u mean with "the serial ASCII output is giving you problems"? What kind of problems? What do you mean with bad lookup? What LabVIEW functions do you use? You need to be more specific.
4. If this is a serial issue,.. Do you have the same problem when doing a serial loopback test with the letter i? Try with the specific ASCII code or just with a normal string.
5. Can you attach a little program that reproduces the problem on your MAC? Please also send specific information about your OS, installed software,...
Regards.
Joris Vanderschrick
Applications Engineer
NI Belgium

Problems exporting files using xFire video clips

Similar Messages

Maybe you are looking for