Problems Exporting on CS6

I am exporting multiple clips on Premiere Pro CS6 from MTS files to Apple ProRes 422. Most of them work except when I have to export a longer clip. Everytime the export is stopping at 2:30. Also the file size is not going over 2.5 GB.
Like I said, the exporting is working for any other clip that is shorter then 2:30 or smaller then 2.5GB. I have tried exporting the clips on 2 machines now and it still won't export larger then 2.5 GB.
Has anyone else had this problem before or is there maybe a setting that needs to be fixed so I can export larger files?
Thanks

Best guess is the export drive is not properly formatted for larger files. Make sure to use NTFS, exFAT or HFS for all drives.

Similar Messages

Problem with Photoshop CS6. If I open a file using Camera RAW

I have a new problem with Photoshop CS6. If I open a file using Camera RAW, and process it as usual, CS6 doesn't want to save it the way it used to. I don't know if I changed something by accident or not.
Here's what happens now: After opening from ACR to CS6 and completinhg all of my work, I choose "Save as..." The save as window opens showing the file name and format. The default format seems to be .PSD. I use the drop down to select .jpg. The file saves normally as a .jpg. When I go to close the image from, I get a new prompt asking, "Save changes to Adobe Photoshop document DSC_xxxx.NEF before closing?
I looked up at the file name in the bar above the work space and noticed that it does NOT change from "DSC_xxxx.NEF" to "DSC_xxxx.jpg" after I have saved the file as a .jpg,in my webesite but it always used to do that. This adds a few extra steps when closing a document and it really slows me down.
In fact, I wouldn't swear to this, but I think it used to save to .jpg by default, without me specifying this.
I don't see a setting in the preferences for what to use as the default file format for saving, so I don't know where to change it back.
Any ideas?
Thanks in advance

You are in the wrong forum; You actually need Photoshop forum at this link:
<http://forums.adobe.com/community/photoshop?view=discussions>
Hope you can repost your question at the correct link.

Problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

Problem exporting to gif

Sorry for my English! I have a problem exporting to .GIF all the animation is in the Movie. Ascorroded Movie .GIF to see the layers. Help me

Go to file and export for gif but it will not sure it retain all of them on the stage as a gif animations. becoz we have more contents like movieclips, nested animations and controls.

I am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully,

i am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully, it just keeps my mac (old 1.6Ghz 2.5 GB sdram G5 still good for most stuff i need) spinning for ever but i can see compression type H.264 selected and the other setting but i can not select any other options as it still thinking but never opens! why is this happening how do i get round it?
my work flow is: 300 images shot on a 5d mark II medium jpegs opened in Light Room cropped to 16:9 then exported and opened in quick time i can save a .mov H264 giving me files sizes of 14 mb for a 16 second time lapse, mp4 9 mb. the only way i can get large files is saving as a self contained movie then i get 300mb files.
i need to save my files 1920 x 1080 photo jpeg codec as i want HD quality.
i am sure there is a simple way round this?
thanks guys!

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

Hello everybody, is anybody else having problems exporting music to their iphone 4's from their itunes 10.6.1. (7)?

hello everybody, is anybody else having problems exporting music to their iphone 4's from their itunes 10.6.1. (7)? i sure am. somehting is way differant. i used to be able to simply drag, and drop albums, artists, and entire genres to my phone without a worry. now i drag an album to my phone, and it will only add a couple of the songs. so i drag and drop again, and maybe even a third time to get all whole album on there. oh, and the album artwork is a no-show. i dont know what i'm missing. it's sure not what i'm used to. anyways, i'm new to this support community deal. thank you in advance for any help.
much respect,
tommy bravo

After further testing, I noticed that iTunes not only becomes totally unresponsive but will start using all the CPU until I kill the process. After restarting, it works again for a while and then it dies again...
Luis

Camera raw update problem loaded on cs6 32bit but not the default 64bit.

Hi to all.
Can you help? I recently updated to 8.8 camera raw after buying a new camera and there was a problem with the installation. It told me that there was a problem writing to cs6. I clicked ignore an the installation completed. The problem is that it has updated to the 32bit version but still shows 7.1 on the 64bit (default). I am running on windows 7 64 bit. Any hel[p with a solution would be appreciated.
Thanks
Update
I did a bit more research on the forum and found a discussion referring to pse which gave instruction to open the archive on the camera raw exe. file and manually copy the 8bi files into the correct location in the C drive eg:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS6\File Formats
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CC\File Formats and
C:\Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats
C:\Program Files\Common Files\Adobe\Plug-Ins\CS6\File Formats
Wait for it this didn't work and completely removed camera raw from the about plugin menu on ps6 64 bit. It worked on cs6 32 bit.
The solution was to then reinstall the plugin via the installation .exe file and all was back as it should be. The only problen now is that adobe bridge has the camera raw preferences greyed out.....I am working on a fix for this and will post if I find it. I hope this helps someone.

Hi Michelle
I am new to the forum so I apologise. I should have mentioned in my update that the installer that fixed the problem was the ACR 9.0. I had originally used the 8.8 installer which caused the problem from ACR 7.1.
Initially the installer didn't work 64 bit version still had 7.1 but it installed ACR 9.0 on the 32 bit. I then proceeded to manually unzip the exe file ACR 9.0 and coped the 8bi file to the locations stated in my update. This didn't affect the 32 bit cs6 but completely removed ACR from the 64 bit. I re ran the ACR 9.0.exe file and everything was fixed.
I hope that this makes sense. I have now developed a problem on Bridge though. I can open raw file in photoshop but I can't view previews and the camera raw preferences are greyed out. I have read elsewhere that other people have had the same problem.

Resolution problems exporting to DVD

I am brand new to FCP 5 and everything I have learned has been within the past two weeks. I have read MANY posts on resolution settings, square pixels vs. retangular pixels, iDVD problems, exporting problems, etc. However I have not found an answer to my problem, but many helped.
I am currently trying to project video from a DVD. The projection needs to be an EXACT size. After exporting and viewing with projection in QT Fullscreen, the video is exactly what I want.
However, when I burn a DVD using iDVD and project it from a DVD player, the projection is slightly stretched horizontally. Why is that?
The sequence is originally from HD and the export settings are -
-Frame Size: 640x480 (4:3)
-Pixel Aspect Ratio: 1440x1080
-Exported using QT Conversion NO COMPRESSION
(There are many other combinations of frame size and pixel aspect ratio's that also work initially, but they project with the same problem.)
I had to have missed something.
ANY suggestions are greatly appreciated.
Eric
Power MAC G5 Mac OS X (10.4.7)

The footage did come from an HDV from Sony.
I use QT Conversion because if I export it as an QT Movie, the video is distorted. However, when exported through Quicktime conversion/quicktime movie/no compression, the movie is exported in the correct dimensions, though the DVD play back issue still persists.
I am running off of iDVD v 5.0.1 and could not find a place where I could choose a 16:9 option, if that is what you meant.
The sequence does include a PSD mask which was imported as a Layered Graphic Sequence. That shouldn't have any impact on the burning issue though.

I have a problem with indesign cs6 and my epson 3880 on mac

I have a problem with indesign cs6 and my epson 3880 on mac. I need an older version of indesign but do not have a serial number....any suggestions?

I see then I believe Kglad's advice is on track with starting with updating your printer drivers. I have also moved this discussion over to the InDesign forum as the Users in this forum likely have additional suggestions.
Also if you can please turn off your e-mail signature if you want to respond via e-mail. Your responses are going to a public forum where the information is accessible by anyone. I have edited your previous response to remove the signature.

PDF quality problems exporting from InDesign and Photoshop

Hi There.
I'm having big problems exporting my InDesign files to PDFs and retaining the res. And it's not just the images (I understand about the dpi) it's the type on there too.
I have been exporting as the preset High Quality Print - is this wrong. Are there other settings to ensure the PDF I export retains the high-res quality and clarity?
At the moment it comes out high-res when I export it as a jpeg or eps but not PDF.
I have also noticed the same problem when I export to a PDF from Photoshop.
I really need to create interactive and high quality print PDFs from my InDesign files.
Please can you advise.
Thanks
Karen

I am also having problems with pdfs exported from Illustrator and Indesign recently. I didn't have these problems before, so I don't kno if something has changed in my settings that I am unaware of.
When I use the 'japanese dots' border in Indesign, it shows on the pdf as a kind of dotted line. I'm exporting as 'High Quality Print'. I switched to Illustrator and drew a line with the pen tool, and converted it to a dotted line; it looked just how I wanted in in Illustrator, but as soon as I exported it, the same thing happened.
I have used the 'japanese dots' border in the past, exporting as 'High Quality Print', and not had this problem.
Does anyone have any suggestions?

Problems Exporting to Excel in Acrobat XI

I have some problems exporting a PDF to excel in Acrobat Std or Pro XI but not in Acrobat Std or Pro X. When exporting in X all the columns and rows are created as they should be, but in XI everything is slammed to the left in one column. Has anyone experienced anything like this and is there maybe a setting that I am missing in the conversion process that was automatic in X but is not in XI?
Thanks in advance for the help.

I am having a similar problem. I used the 30 trial acrobat XI and it exports pdf to excel perfectly. However, after buying and installing the program, the export is all messed up with data not in correct columns...etc.
Acrobat tech controlled my computer and experimented a bit. He said that my pdf was created by a 3rd party application called crystal reports and that acrobat doesn't work on about 50% of these 3rd party creations. I said, then why does the trial work so well. He said there is nothing different between the trial version and the actual purchased version. This cannot be true or something else is up. I told him I wanted to uninstall my purchased program and reinstall the trial version just to prove it to him. He said it would not allow me to reinstall the Trial.
After my phone call was over, I did it anyways. It did let me reinstall the trial version. I took 7 pdf sent to me from work from each server (wanted to make sure one of my servers was not sending different types of pdfs). Each pdf did not convert successfully when I used my purchased version. Then I uninstalled and reinstalled the trial version. The trial version successfully exporting my pdf to excell (all 7 of them). Something weird is going on.
Any insight would be appreciated.

Problems installing Photoshop CS6 Extended

Hello to whoever is reading this - I have a problem installing Photoshop CS6 Extended (as you can guess from the title) due to the fact that I download a pre release version of it (not the beta) And I've looked everywhere on my laptop and I still can't install the trial even though I've deleted everything relevant to the pre release version, it can't be my normal version of Photoshop CS5 can it? It'sonly occured to the Photoshop CS6 Extended trial, all the other Creative Suite trials from Adobe Download Assisstant work.

Check the start page of this forum or the PS forum. There used to be special threads listed in teh yellow info boxes with info on how to resolve these issues.
Mylenium

Problem Exporting / Importing print forms with program RSTXSCRP

Hi!
there is problem Exporting / Importing print forms with program RSTXSCRP.
when I transfer print form from one SAP system to other, logo image and some text is missing... what could be the reason?
Maybe there is other way to transfer print forms between SAP systems without using program RSTXSCRP?
Will reward,
Mindaugas

Hi,
when you transfer print forms from one sap system to another, logos are not transfered automatically. these are actually .bmp files which need to be existing in every client. then only when you run your print program logo can be seen in your print output. hence logos need to be created explicitly in every client where you want to run your print program.
thanks,
sksingh

Problem exporting using Compressor in FCP?

I had a problem exporting using Compressor in FCP and then I found an interesting article from Apple:
http://support.apple.com/kb/TS1099
but it doesn't really explain the solution. What steps do I need to take exactly in Compressor to make it work?

James M. has it right. Convert the MP3 and the WAV files to AIFF, 48khz, 16 bit and use those in your Sequence. You might even have to convert the existing AIFF file(s) if they aren't 48khz, 16 bit.
Once you've edited the new files into your Sequence, do an Audio Mixdown, then export.
-DH

Problems Exporting on CS6

Similar Messages

Maybe you are looking for