Problems Exporting PNG secuences to Premier in a PC

I had export a sequence from Motion 4 to use in Premiere cs4 in a PC, and the software don´t import it, anybody know a solution, I trait exporting and convert de sequence in many waves whit´t result in Premiere or AFX (PC).
Sorry for my english, and the PC question.

I hope some help, and again sorry for my english. Gracias< </div>
el problema es el mío, no el suyo. Debo haber estudiado español mejor en High School secundaria.
PNGs should work. The PC probably does not have the correct version of Adobe software to oepn them. I do not know much about PCs either.
Please try to export a short small section of your Motion project as a series of TIFF files. See if those will open on your PC.
PNGs debe trabajar. La PC no tiene probablemente la versión correcta del software de Adobe al oepn ellos. No sé mucho sobre las PC tampoco. Intente por favor exportar una pequeña sección corta de su proyecto del movimiento como serie de ficheros del tiff. Vea si ésos se abren en su PC.
bogiesan

Similar Messages

DW CS3 problem with PNG-8 images in Design View?

DW CS3 (build 3481) on XP seems to have problems with PNG-8 images, specifically trying to display them in design view.
I had a very simple image that was able to be exported by Fireworks CS4 as PNG-8 using 4 colors (no transparency) for a tiny file size under 250 bytes.
DW could not display it at all, or even recognize it, reporting it was 0 x 0 in size. I published the page anyway, and it looked fine in the browser.
I upped the number of colors to 32, and DW could then display it in design view in the page I was working on.
I'm still having problems with other PNG-8 images. The attached file "temp.jpg" is a screenshot showing part of the design view in DW.
The smaller image on the left of the banner is "58_certificate_of_discharge.png" (attached), and the larger image below is used as the background of the DIV containing the form,"compassbk.png" (also attached).
These images all look fine in the browser, but terrible in DW.
I'm stumped as to why.
Thanks in advance.

According to a different discussion, the images that are stuck as "Queued" are showing a bug in the virus scanning on the forums.
Now trying the recommended 'camera icon' method...
Looks like it worked.
Now compare what it looks like in DW CS3 in the design view:
It's a 16 color PNG-8 made in Fireworks CS4 with no transparency, size is 113 x 58, ending up at 1.71K.
If this is a repeatable problem in CS3, is there any hope of it being resolved, or am I stuck with upgrading to CS4 as my only option (assuming it's fixed in CS4)?
Thanks.

Export PNG in CMYK vs. RGB. Changing colors.

Short version: Using Illustrator CC. I correctly exported a PNG logo in RGB (sent to client), but the new PNG logo looks much different than the old PNG logo that was exported incorrectly in CMYK (sent to client long ago).
Client wants to know why the NEW PNG logo looks so different than the EPS logo and the OLD PNG logo (all starting with the same Pantone color).
Longer version:
I recently sent logos to my client in different formats.
ai, eps, eps CMYK, pdf, and png
Prior to creating the PNG version in Illustrator CC,
I changed Illustrator's color mode to RGB, then converted my Pantone colors to RGB (specific values per the Pantone book), then exported as PNG.
This created a much different blue than the CMYK eps version.
Someone else on the client side is working with my files and questioning why the blues look so different. The Pantone eps vs. the RGB version.
Problem:
In the past, the PNGs had been created incorrectly--They had been exported in CMYK mode without converting anything to RGB and they matched much closer to the EPS version.
Now they are asking why there is such a big difference.
I did the process correctly, I'm not sure how to answer this. Why do they look so different?

So if I just leave the Document Color Mode as CMYK, leaving with the logo set in it's specific Pantone colors, and then Export/PNG, that will covert my CMYK colors to RGB for me. Seems almost too easy. Just go File/Export/PNG, but okay.
And while that may give me a better perceptual match, here's the other side of the issue.
They've given me and their web company specific RGB values for their logo. These are based on the Pantone book, and likely different than the conversion Illustrator will do.
The idea being, they want the website and logo to be the exact same blue. And they are based on the values they gave, but they look different than the original Pantone. Brighter and more vibrant. I'm dealing with another member of the client team, trying to use Illustrator on her end for smaller tasks, and she wants to know why the rgb PNG logo (which I entered in manual values for based on the Pantone book), is so different than the Pantone eps file. In the past, when I just exported as a straight PNG without tinkering, the perceptual match was there. Now it isn't. How can I explain this?

Problems with PNG colors in illustrator

I'm beyond frustrated with illustrator's png export at this point, contacted adobe customer service 3-4 times with no answer, already made a post about this with no solution, here is the problem; everytime I export from illustrator as a png the color changes. It doesn't matter if I am working in RGB or cmyk, the color will always change, typically the colors just look faded/ less saturated. There is no way for me to match the color of an exported jpeg to an exported png. This is a problem because when I give my clients their logo in png I need to import it into photoshop or preview to change the color coding so that it matches the previous jpegs I would sent them, now while working with packaging (cmyk document) the png export looks pretty faded, but it prints fine. Is this typical? My in illustrator colors look fine and are the same as my jpeg exports, the only thing that has a different color look is png exports, no matter if I choose embed color profile (save for web), assign profile, bascially any color choosing option in illustrator. I'm wondering what does everyone else do when their client wants the logo in a png? Do you just work around this with assigning a profile in a program other than illustrator?

I am afraid that the workaround is all you can do at the moment; open the png file in Photoshop and assign sRGB profile (you can set the Ask when Opening for missing profiles in the Photoshop color settings).
There is no way to embed a color profile in a .png file in Illustrator (like you can in Photoshop's Save for Web dialog)
But that looks like a good feature request:
Adobe - Feature Request/Bug Report Form

Pixel Preview doesn't match exported PNG

I use Illustrator CS4 for icon design, so Pixel Preview is a pretty important feature for me. Unfortunately, I just found out (the hard way) that Pixel Preview isn't accurate - it doesn't show you exactly what you'll get when you export a PNG via Save for Web and Devices.
Here's an example from my current project that shows the problem (enlarged 4x):
A screen snap from AI with Pixel Preview off:
A screen snap from AI with Pixel Preview on:
The exported PNG file:
Look at the center of the second image: See that dark gray line bleeding from the light gray circle into the black area? Now look at the third image: The line isn't there.
(Please don't fixate on this one example. Since I noticed the problem, I've found inconsistencies all over the place. This one was just the easiest to see.)
If I can't count on the absolute, pixel-for-pixel accuracy of Pixel Preview, then this feature becomes worse than useless in my work, because it actually misleads me into making small tweaks that make the final output look worse.
If anyone knows of a workaround (or a setting that turns on "accurate mode"), I'd love to hear about it.

I can't state this definitively, but the inconsistency seems to happen with gradient fills. (The light gray semicircle in the example in my original post has a gradient fill with a pretty abrupt transition from light to dark.) Maybe the issue is specific to gradients?

Problem exporting to gif

Sorry for my English! I have a problem exporting to .GIF all the animation is in the Movie. Ascorroded Movie .GIF to see the layers. Help me

Go to file and export for gif but it will not sure it retain all of them on the stage as a gif animations. becoz we have more contents like movieclips, nested animations and controls.

I am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully,

i am having problems exporting my time lapses from quick time pro i need to save my files as photo jpegs but the standard video compression window will not open fully, it just keeps my mac (old 1.6Ghz 2.5 GB sdram G5 still good for most stuff i need) spinning for ever but i can see compression type H.264 selected and the other setting but i can not select any other options as it still thinking but never opens! why is this happening how do i get round it?
my work flow is: 300 images shot on a 5d mark II medium jpegs opened in Light Room cropped to 16:9 then exported and opened in quick time i can save a .mov H264 giving me files sizes of 14 mb for a 16 second time lapse, mp4 9 mb. the only way i can get large files is saving as a self contained movie then i get 300mb files.
i need to save my files 1920 x 1080 photo jpeg codec as i want HD quality.
i am sure there is a simple way round this?
thanks guys!

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?

Hello everybody, is anybody else having problems exporting music to their iphone 4's from their itunes 10.6.1. (7)?

hello everybody, is anybody else having problems exporting music to their iphone 4's from their itunes 10.6.1. (7)? i sure am. somehting is way differant. i used to be able to simply drag, and drop albums, artists, and entire genres to my phone without a worry. now i drag an album to my phone, and it will only add a couple of the songs. so i drag and drop again, and maybe even a third time to get all whole album on there. oh, and the album artwork is a no-show. i dont know what i'm missing. it's sure not what i'm used to. anyways, i'm new to this support community deal. thank you in advance for any help.
much respect,
tommy bravo

After further testing, I noticed that iTunes not only becomes totally unresponsive but will start using all the CPU until I kill the process. After restarting, it works again for a while and then it dies again...
Luis

Can't export to tape on Premier Pro CS4 Extended

When I attempt to export to tape from Premier Pro CS4 Extended, version 4.1.0, to a DV Cam, the tape rolls and records (with device control) but I get no video or audio.
I have:
-selected the timeline for the sequence
-the work area bar is over the entire sequence
-I’ve made sure the tape is record enabled
-I have tried two DV cameras, and three fire wire cords
-I am able to capture video into the computer using all of the above
-I’ve tried moving my project from my external hard drive to my internal one
Still no export…….
Any ideas why?
-I am using a Dell computer with:
            - Windows XP Professional 2002 Service pack 3
            - Intel[R] Core [TM]2 Quad CPU
            -Q9450 @ 2.66JHz
            -2/66 GHz, 3.25 GB of RAM
            -Physical Address Extension
            -Unfortunately I can not find the name of my video card but this computer was built specifically to edit video so I am sure it has one.

Make sure External Device under Export is enabled in the Playback Settings of the Program monitor.
See the picture below.

Resolution problems exporting to DVD

I am brand new to FCP 5 and everything I have learned has been within the past two weeks. I have read MANY posts on resolution settings, square pixels vs. retangular pixels, iDVD problems, exporting problems, etc. However I have not found an answer to my problem, but many helped.
I am currently trying to project video from a DVD. The projection needs to be an EXACT size. After exporting and viewing with projection in QT Fullscreen, the video is exactly what I want.
However, when I burn a DVD using iDVD and project it from a DVD player, the projection is slightly stretched horizontally. Why is that?
The sequence is originally from HD and the export settings are -
-Frame Size: 640x480 (4:3)
-Pixel Aspect Ratio: 1440x1080
-Exported using QT Conversion NO COMPRESSION
(There are many other combinations of frame size and pixel aspect ratio's that also work initially, but they project with the same problem.)
I had to have missed something.
ANY suggestions are greatly appreciated.
Eric
Power MAC G5 Mac OS X (10.4.7)

The footage did come from an HDV from Sony.
I use QT Conversion because if I export it as an QT Movie, the video is distorted. However, when exported through Quicktime conversion/quicktime movie/no compression, the movie is exported in the correct dimensions, though the DVD play back issue still persists.
I am running off of iDVD v 5.0.1 and could not find a place where I could choose a 16:9 option, if that is what you meant.
The sequence does include a PSD mask which was imported as a Layered Graphic Sequence. That shouldn't have any impact on the burning issue though.

PDF quality problems exporting from InDesign and Photoshop

Hi There.
I'm having big problems exporting my InDesign files to PDFs and retaining the res. And it's not just the images (I understand about the dpi) it's the type on there too.
I have been exporting as the preset High Quality Print - is this wrong. Are there other settings to ensure the PDF I export retains the high-res quality and clarity?
At the moment it comes out high-res when I export it as a jpeg or eps but not PDF.
I have also noticed the same problem when I export to a PDF from Photoshop.
I really need to create interactive and high quality print PDFs from my InDesign files.
Please can you advise.
Thanks
Karen

I am also having problems with pdfs exported from Illustrator and Indesign recently. I didn't have these problems before, so I don't kno if something has changed in my settings that I am unaware of.
When I use the 'japanese dots' border in Indesign, it shows on the pdf as a kind of dotted line. I'm exporting as 'High Quality Print'. I switched to Illustrator and drew a line with the pen tool, and converted it to a dotted line; it looked just how I wanted in in Illustrator, but as soon as I exported it, the same thing happened.
I have used the 'japanese dots' border in the past, exporting as 'High Quality Print', and not had this problem.
Does anyone have any suggestions?

Problems Exporting to Excel in Acrobat XI

I have some problems exporting a PDF to excel in Acrobat Std or Pro XI but not in Acrobat Std or Pro X. When exporting in X all the columns and rows are created as they should be, but in XI everything is slammed to the left in one column. Has anyone experienced anything like this and is there maybe a setting that I am missing in the conversion process that was automatic in X but is not in XI?
Thanks in advance for the help.

I am having a similar problem. I used the 30 trial acrobat XI and it exports pdf to excel perfectly. However, after buying and installing the program, the export is all messed up with data not in correct columns...etc.
Acrobat tech controlled my computer and experimented a bit. He said that my pdf was created by a 3rd party application called crystal reports and that acrobat doesn't work on about 50% of these 3rd party creations. I said, then why does the trial work so well. He said there is nothing different between the trial version and the actual purchased version. This cannot be true or something else is up. I told him I wanted to uninstall my purchased program and reinstall the trial version just to prove it to him. He said it would not allow me to reinstall the Trial.
After my phone call was over, I did it anyways. It did let me reinstall the trial version. I took 7 pdf sent to me from work from each server (wanted to make sure one of my servers was not sending different types of pdfs). Each pdf did not convert successfully when I used my purchased version. Then I uninstalled and reinstalled the trial version. The trial version successfully exporting my pdf to excell (all 7 of them). Something weird is going on.
Any insight would be appreciated.

Problem Exporting HD files CC 2014

Hi, I'm having trouble exporting HD files from a CC '14 project. I've tried ProRes 422 QT, MPeg2 HD and H264 HD. All of these are failing in both Encoder and when I try to export them directly from Premier. I was able to export a low res H264 though. Any Ideas why this is happening.

Ahh. There's wiser heads around who can probably completely correct & improve this response ... but here's my two cents USD.
I'd suggest creating a new project on your machine with the same folder/bin structure, then copying all the assets of that project (graphics, stills, footage, sequences) individually and manually putting them in place on your machine. Then try it and see what happens. If there's a bit of corruption to the project files somewhere or just wonkiness between the other rig & yours, sorting all that out can take weeks.
This process may take you up to an hour, but ... might just work.
Neil

Problem Exporting / Importing print forms with program RSTXSCRP

Hi!
there is problem Exporting / Importing print forms with program RSTXSCRP.
when I transfer print form from one SAP system to other, logo image and some text is missing... what could be the reason?
Maybe there is other way to transfer print forms between SAP systems without using program RSTXSCRP?
Will reward,
Mindaugas

Hi,
when you transfer print forms from one sap system to another, logos are not transfered automatically. these are actually .bmp files which need to be existing in every client. then only when you run your print program logo can be seen in your print output. hence logos need to be created explicitly in every client where you want to run your print program.
thanks,
sksingh

Problem exporting using Compressor in FCP?

I had a problem exporting using Compressor in FCP and then I found an interesting article from Apple:
http://support.apple.com/kb/TS1099
but it doesn't really explain the solution. What steps do I need to take exactly in Compressor to make it work?

James M. has it right. Convert the MP3 and the WAV files to AIFF, 48khz, 16 bit and use those in your Sequence. You might even have to convert the existing AIFF file(s) if they aren't 48khz, 16 bit.
Once you've edited the new files into your Sequence, do an Audio Mixdown, then export.
-DH

Problems Exporting PNG secuences to Premier in a PC

Similar Messages

Maybe you are looking for