Problems exporting Raw to use in Photoshop

I searched past posts and found this problem but did not find a solution. When I export a file from iphoto 6 in raw photoshop will not recognize it, either as photoshop raw or camera raw. When I open it by setting all document in the dialog box, the file is greyed out. I know I can convert the file to a tiff or a jpeg but I really want to edit it as a raw file.
Thanks,
Bill

Hello Harrison
i have the same problem. i have the panasonic FZ30 and the RAW and TIFF files are not supported by iphoto 6. the TIFF files from the previous version of this brand was recognized and can be imported. the only way i can import the two file types is with image capture and only TIFF is recognized. the RAW files have a label but no image just blank.
my solution came to me when i looked at a photoshop CS book. i had already downloaded the new RAW plugin from adobe for elements 3. launch elements 3, browse for file, select file and open. image appeared with all relevant data on how it was shot. clicked "open" at the bottom of the page and there was the picture i shot. double-clicking on the file only showed me a greyed out nothing picture.
i repeated this two more times to make sure it worked and it did. it might work for you.

Similar Messages

  • Problems viewing RAW photos properly in Photoshop/Lightroom/ACR

    Hey folks. New here and looking to find some assistance with a  problem I'm having in Photoshop CS4, Lightroom 2 and Adobe Camera Raw  5.7 when attemtping to view RAW photos straight from my Canon 450D. My  computer is a Mac PowerPC G5 running OS X 10.5.8 with a single 1.8Ghz  CPU and 3.5Gb of RAM. Photoshop CS4 is version 11.0.2. Lightroom is  version 2.7. Adobe Camera Raw is version 5.7.
    What I am  having problems with is viewing RAW photos from my camera in all of  these applications. No problems are encountered with any other file type  such as PNG or jpg.
    I have attached a screen capture of  what I am seeing when I open a .CR2 RAW image in Camera RAW before  opening in Photoshop. As you can see, the software seems to be having a  difficult time rendering the photo properly. I can view these files on  other computers using the Canon software that came with my camera. I get  this same problem if I view the image in Lightroom.
    As  far as I know, I can't upgrade to PS CS5 or LR 3 because I am still  running on the PPC architecture, so I need to find how to fix this  without having to buy a Mac Pro and the newest software.
    Any ideas on how to troubleshoot? If the screenshot is too small, I can provide the full-res version.

    I'm well-versed in forum ettiquette, thank you. I do, however, see no problem why posting about this problem once in each forum covering the software involved in my problem would be an issue. If I posted about the problem in only one forum, let's say in the Lightroom forum, and the problem was experience by another person who did not use Lightroom and would not be browsing the Lightroom forum for help, how would they have come across this post? Unless they also looked in the Photoshop forum, they might not have seen this post. So where's the harm in having it viewed by a greater number of individuals?
    With that aside, my problem is now resolved. After looking around a bit more on the forums here last night, I came across a thread started by a fellow who was experiencing the same issue as I, except he had newer versions of the software. Someone had replied to his post suggesting that it could have been faulty RAM modules and that they once experienced similar issues which were resovled by replacing the RAM. This was good news to me, since I had just purchased additional RAM for my Mac last week. It arrived today and I installed it and booted the Mac up. I purged any cache files used by these three software titles and then reattempted opening a RAW image in Photoshop. I took my latest RAW images from my camera, exported them to a USB thumb drive, and then from there exported them to my Mac. I tried to open on of the images in Photoshop and it opened successfully with ACR along with a complete and pristine preview of the image. Open the other RAW images in Lightroom, no problems.

  • Problem exporting from Lightroom 4 to Photoshop CS6

    When using the ctr E keyboard shortcut to edit in PS6 frpm LR4, multiple raw files are generated in PS CS6 and only stop creating when PS is forced closed.  Using the Drop Down menu in LR makes the transfer to PS6 no problem. Am I doing something wrong?

    Maybe a keyboard issue - shortcut key toggling multiple times. But, if you're sure your keyboard is fine, then try this:
    Reset LR preferences:Windows 7/ Vista: The preference setting file is Lightroom 4 Preferences.agprefs, in C:\Users\[user name]\AppData\Roaming\Adobe\Lightroom\Preferences\. Rename/ move this file to a different location. LR will recreate preferences during next launch. See if this fixes the issue. The reason we're renaming or moving it is so that if it doesn't fix the error, you can move it back there so you don't have to recreate your in-application preferences again
    Reset Photoshop preferences: Follow instructions here: http://forums.adobe.com/thread/375776
    See if either or one of the above suggestions works.
    -ST

  • Problems exporting RAW + JPEG Pairs

    I have imported my images as RAW + JPEG Pairs (JPEG is Master)
    When I try to export originals, there are two problems:
    1.  Aperture exports both the JPEG and the RAW file.  Is there anyway to force it to export just the file that is set as the master (in this case, the JPEG)?
    2. More problematic--the RAW files are exported in the correct orientation, but the JPEG files that have been shot in portrait orientation are rotated 90 degrees clockwise.   Is there anyway to prevent this?
    Thanks in advance for your help
    Gordon

    There's an easier way:
    Open the Aperture library contents (ctrl-click, select "show pkg contents"), and navigate to masters/year/month/day/downloads, and delete the raw file(s).
    You can view by kind, and delete all the raw files in a project this way; just make sure you haven't assigned any of the raw files as master.
    So far, I have not observed any adverse effects to the Aperture database, but they may be coming. I always archive all the files off-line before importing to Aperture, no nothing is completely irreversible.
    It would still be nice, as another poster said somewhere, to render a raw file as a new jpg master, and then delete the raw, but I use raws so rarely, that deleting the ones I don't use gives me 90% of the disk savings.

  • Problem Exporting editied lightroom image to photoshop.

    Please help after adjusting settings etc in lightroom 4 i try exporting it into photoshop cs5 ! when i do all the edits ive done in lightroom get reset and the original raw file is all im left with in cs5! which defetes the object of editing in lightroom4 ! this never happened with lightroom3 ....confused please help

    anthonyputtock wrote:
    what is acr?
    Adobe Camera Raw - the raw convertor in Photoshop CS. 
    For compatibility with LR4 you need ACR v6.7.  Go to Help menu, About plug-in > Camera Raw...
    If it's not 6.7, then when (in LR4) you try to "Edit in" and choose Photoshop, it should warn you it's not compatible and offer you "Render in Lightroom" or "Open Anyway".  You need to choose "Render in Lightroom".  If you don't see the choice, go to (in LR) Edit menu, Preferences, General tab and click "Reset all warning dialogs". 
    Or upgrade to ACR 6.7 - in Photoshop go to Help, Updates.  Note ACR 6.7 requires CS5, which you say you have. 
    If it's not that, I don't know what the problem is!

  • I am having problems exporting to PDF using InDesign for Mac.

    Hi all!
    I just started using the Creative Suite on Mac and have run into a couple problems. One is that when I set up a document in InDesign using "Facing Pages" and then export to PDF, the document exports each set of "Facing Pages" as one singular spread (my 20 page InDesign document becomes a 10 page PDF). Once it is a PDF, there are no page break lines in the center of the spread to indicate that they are two separate pages, and when I try to set up viewing preferences in Acrobat (single or double page), it too recogrnizes each spread as a single page.
    When I used to do this in InDesign using Windows, whether I exported to PDF or printed to PDF from a document set up with "Facing Pages," each page would still be considered separate once converted to PDF (20 page InDesign docment becomes a 20 page PDF).
    This also leads me to my next question : I see that on Mac, there is no option for printing to PDF, but I notice a quality difference specifically when it comes to linework (vector information) that has been "placed" in the document from Illustrator. Is there any way to achieve the quality of printing to PDF on Mac?
    Thank you in advance!
    Gabby

    Hi Bob, I just tried your suggestion, but the interactive PDF is in spreads by default, no way to change the setting. When I choose to view by single page in Acrobat, it displays a single spread.
    When I choose to view by spreads, it displays 4 pages, two spreads. That's the topic of this whole discussion, I believe. I do own CS 6 at home, however my employer supplied me with CS 5.5. And I have very little, if any, influence on purchasing.
    So, I have no good way to make an interactive PDF (with differing recto/verso headers and footers), that is accessible and shows the correct header/footer. It's either single pages (with one header/footer), or recto/verso headers/footers but PDF only as a spread, as well as I can tell.
    Unless you know something else I can do...
    Best, Marilyn

  • Problem exporting video to use in iDVD

    I am working with anamorphic video in FCE 4.0.1. Video is imported from Canon GL2. The sequence I am working with has the anamorphic flag set and the canvas comes up as a wide screen view as I would expect. I export to QuickTime Movie (not self-contained), which we know sets the display size to 4:3. Open in QuickTime Pro, set the Movie Properties to 853 x 480 and save (as described in http://fcpbook.com/Video9.html ). Drag the movie into iDVD wide screen project. I've done this for a long time and it has always worked until recently.
    Now when I preview the movie in iDVD it displays as squished 4:3. I suspect some upgrade of some software (probably QT or iDVD) has made it quit working.
    I know there have been a lot of questions about this and I have tried various solutions without success. The only way I get it to come up as wide screen in iDVD preview is to use Quick Time conversion and export to a new file as 16:9. The big problem there is the chapter markers are not carried along, and I do not want them at every N minutes as iDVD will provide (I want them where I put them at transitions!). My only other thought is to export the full movie from FCE, bring it into iMovie, add the chapter markers there and export to iDVD (I understand iMovie is more compatible with iDVD).
    I am using QT 7.6.0 and iDVD 7.0.3. This question may be more appropriate for those forums, but probably mostly only effects users that had exported from FCE. So I start with the post here...

    Well, there is one more possibility using myDVDEdit, a powerful freeware application used to modify some parameters of a DVD image, before actually burning it. In this case you also need Toast or any other application able to make a video DVD image out of a VIDEO_TS folder.
    The steps below seem complex, but in fact they are pretty fast, after a couple of usages.
    Instructions for using myDVDEdit:
    - Do not burn the DVD from iDVD but create a +disk image+ file
    - From the finder open the disk image and copy its VIDEO_TS folder to your desktop
    - Change the VIDEO_TS file permissions to let you modify its contents: in the finder Get Info panel select read/write for the folder and +all its internal folders+
    - Open myDVDEdit and use its File>Open command to open the modifiable copy of the VIDEO_TS folder
    - In the top left panel of the myDVDEdit window select +VTS 1+ (this contains the video)
    - In the panel below the video frame select +VTS 1+ among the vertical left tabs, and then Parameters among the top center tabs
    - Now you can see some parameters, that in your case should be: Coding mode: MPEG-2, Standard: NTSC, Resolution: 720x480
    - Aspect is what you need: this should be set to +16:9 auto letterbox+ - if not, select this option
    - Save - this is all you need to do in myDVDEdit
    - note that myDVDEdit window shows any change you make, but you can also open the DVD Player from myDVDEdit itself with File>Test with DVD Player
    - Now you have to +make a new disk image with the modified VIDEO_TS folder+: if you have Toast you have simply to drag the new VIDEO_TS folder to the proper Toast window and burn; otherwise you can use DVDImager, a free application, to create the new disk image, and then use Disk Utility to burn the real DVD (however DVDImager not always works with me... couldn't find out why).
    If this doesn't work, you might also try the other options for the Aspect parameter. The full list is: 4:3, 16:9, 16:9 auto Pan&Scan, 16:9 auto Letterbox (the 1st to try), 16:9 auto Pan&Scan and Letterbox (2nd choice)
    Piero

  • Problem exporting from FCP using compressor

    Out of the blue - I'm getting batch failures trying to export from FCP for use in a DVD. Immediately after selecting compressor for export, I get an error reading "That file already exists", and a new tab appears in the media browser with a lengthy character string. Compressor opens fine, and I select Best Quality 4:3 encoding for video and aiff48 for audio. When the batch is submitted - it promptly fails and blames FCP for generating an error.
    Did all kinds of restarts and work arounds to no avail. The promising news is that this error seems to occur only when exporting from FCP through Compressor.
    My work-around is to export a QT movie of the piece, quit FCP, launch Compressor, and then import the QT for batching.
    Hope this helps anyone else in similar situations
    Martin
    G5 PPC   Mac OS X (10.4.8)   FCP 512 post production

    Hi:
    How long is your movie?
    The best workflow is FCP > Compressor > DVDSP.
    You can encode your timeline directly to get MPEG2 video and Dolby 2 (AC3) audio files. Then import those in DVDSP and author your DVD.
    Using Compressor you control the full encoding process. You can test with small parts of your movie (those where you got problems with iDVD) and find the best encoding options fopr your footage.
    Of course the DVDSP learning curve is longer than iDVD but once you learned ir you probably never go back. Like iMovie and FCP.
    To give you detailed info about what encoding settings to use you must post some info about your FCP project.
    Hope that helps !
      Alberto

  • Problems Exporting for Podcast Use

    I've been doing some podcasting using iMovie HD and iWeb. some of them have been going fine. however, i've had a few where the video freezes (after export) but the audio keeps going. no matter how many times i export it or try different formats, they always freeze in the exact same place. can somebody help explain this to me and how i can fix it?

    I have the same problem. The podcast created from iMovie freezes like 20 seconds into the run and the audio keeps going.

  • Problem exporting RAW files from Photos

    Previously when using iphoto when exporting images I was given the option of exporting the orrigional RAW image as well as the edited now jpg.
    With Photos I am ot given this option and can only export the edited jpg and can not even find the master file though Photos says the image I am viewing is the
    RAW file.

    Um
    File -> Export -> Export Unmodified Originals?

  • Problems Exporting RAW images to JPEG in Lightroom 1.1

    I have used LR 1.1 with much success in editing, then exporting/burning JPEG images.  But now, I am shooting in camera RAW (Nikon D40x), and when I attempt to export the edited images to JPEG files, I get the message that an error has occurred during export, and the files do not burn to jpeg.  What can I do to correct this?

    It will convert all images to jpegs, resize ... however you set it up ... and yes, it is so straightforward as it seems to be .
    It makes no sense to upload RAW files to the web for public use in the first place. Second, LR does not touch/change the RAW files. Therefore, how would it be able to integrate your dev settings when using RAW on export?
    You can add the ftp target in LR and it will upload directly to your web server.
    If you choose Flash-based, people need to have the Adobe Flash player installed on their computer. The Flash player itself is not part of the LR setup. Most of people already have it installed and who doesnt will be asked to install it.

  • Problem exporting crystal PDF using printoutputController.export method

    Has anyone used PrintOutputController().export() method in ReportClientdocument to export Crystal PDF report to a JavaIOStream. I am getting an error when I try to export it using this method. The error I get is unable to connect RAS.rptappsrver followed by classcast unable to export to IXMLSerializable. Here is the code I am using.
    Is there some setting I need to enable on the server to use the export function or any other idea will be appreciated?
    IReportAppFactory reportAppFactory = (IReportAppFactory) enterpriseSession.getService("","RASReportFactory");
    ReportClientDocument reportClientDoc = reportAppFactory.openDocument(reportID, 0, Locale.ENGLISH);
    return reportClientDoc.getPrintOutputController().export(exportOptions);
    Here is the exact Exception:
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: FICLDEV303VWIN.RAS.rptappserver. --- com/crystaldecisions/sdk/occa/report/exportoptions/ReportExportFormat incompatible with com/crystaldecisions/xml/serialization/IXMLSerializable---- Error code:-2147217387 Error code name:connectServer
    Caused by:
    java.lang.ClassCastException: com/crystaldecisions/sdk/occa/report/exportoptions/ReportExportFormat incompatible with com/crystaldecisions/xml/serialization/IXMLSerializable
         at com.crystaldecisions.proxy.remoteagent.FetchReportViewingRequest.saveContents(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.FetchReportViewingRequest.save(Unknown Source)
         at com.crystaldecisions.xml.serialization.XMLObjectSerializer.save(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ras.internal.CECORBACommunicationAdapter.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ras.internal.CECORBACommunicationAdapter.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ras.internal.CECORBACommunicationAdapter.request(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.z.a(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.s.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
         at com.fmr.fic.fund2fund.web.servlet.CrystalReportServlet.getReportByteStream(CrystalReportServlet.java)
         at com.fmr.fic.fund2fund.web.servlet.CrystalReportServlet.processUsingReportExportControl(CrystalReportServlet.java)
         at com.fmr.fic.fund2fund.web.servlet.CrystalReportServlet.doGet(CrystalReportServlet.java:128)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212)
         at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629)
         at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837)
         at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220)
         at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204)
         at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681)
         at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77)
         at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421)
         at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367)
         at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:94)
         at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548)
         at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601)
         at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934)
         at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021)
         at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1332)
    I
    Is there some setting I need to enable on the server to use the export function or any other idea will be appreciated?
    Edited by: Dilshad Ahmed on Nov 5, 2008 5:55 PM
    Edited by: Dilshad Ahmed on Nov 5, 2008 6:09 PM

    Here is the answer. After getting ReportClientDoc from factory we need to set the DatabaseController userid and password (if report on Crystal server is accessing oracle database as datasource). In addition we need to set parameters on the ReportClientDoc for reports and subreports before doing the the export.
    Here is snippet of code: The code below is used to get ReportClientDocument and export it as PDF using bytestream.
    /* Code for getting report client document */
    private static synchronized ReportClientDocument getReportClientDocument() throws Exception
             int count = 3;
             ReportClientDocument rpt = null;
             while (count > 0 && rpt == null)
                  try
                       if (_enterpriseSession == null)
                            ISessionMgr _sessionMgr = CrystalEnterprise.getSessionMgr();
                            _enterpriseSession = _sessionMgr.logon(CRYSTAL_USERID, CRYSTAL_PASSWORD, CRYSTAL_SERVER, CRYSTAL_AUTH);
                             LOG.info("Successful Logging into Crystal Server: " + CRYSTAL_SERVER);
                             _reportAppFactory = (IReportAppFactory)_enterpriseSession.getService("", "RASReportFactory");
                             _infoStore = (IInfoStore)_enterpriseSession.getService("InfoStore");
                             IInfoObjects result = _infoStore.query("Select SI_ID, SI_NAME From CI_INFOOBJECTS Where SI_NAME = '" + CRYSTAL_REPORT_NAME + "' And SI_INSTANCE = 0");
                             IInfoObject infoObject = (IInfoObject)result.get(0);
                             _reportId = infoObject.getID();
                             LOG.info("Located Report Id on Crystal Server: "+_reportId);
                        LOG.info("Created or found CR session");
                        rpt = _reportAppFactory.openDocument(_reportId, 0, Locale.ENGLISH);
                        break;
                  catch (Exception e)
                       rpt = null;
                       _enterpriseSession = null;
                       if (--count == 0)
                            throw e;
              return rpt;
    /* report for setting parameter */
    private synchronized void setReportParameters(ParameterFieldController fieldController, String reportName,
                  String[] reportParameterValues,     DataDefController subDataController) throws SalesforceException
             try
                  Fields params = subDataController.getDataDefinition().getParameterFields();
                   for (Iterator it = params.iterator(); it.hasNext();)
                        ParameterField paramField = (ParameterField)it.next();
                        int paramIndex = getElementIndex(_reportParameters, paramField.getName());
                        if (paramIndex < 0)
                             throw new SalesforceException("Parameter not defined in the configuration");
                        ParameterFieldDiscreteValue dVal = new ParameterFieldDiscreteValue();
                        dVal.setValue(reportParameterValues[paramIndex]);
                        fieldController.setCurrentValue(reportName, paramField.getName(), dVal);
                   LOG.info("Completed setting parameters for report " + reportName);
             catch (ReportSDKException e)
                   LOG.error("Set Report Parameters error: ", e);
                   throw new SalesforceException("Set Report Parameters error", e);
         catch (Exception e)
                   LOG.error("Error from getElementIndex: ", e);
                   throw new SalesforceException("Set Report Parameters error", e);
    /* main method used to getReport based on passing information */
        private synchronized byte[] getReport(String contactId) throws SalesforceException
             try
                  String[] reportParameterValues =
                       new String[] {_sessionId, _viewId, _requestId, contactId, _language};
                   DataDefController reportDefController = reportClientDoc.getDataDefController();
                   reportParameterValues[0] = (_cache.equalsIgnoreCase("true") ? "CACHE:Main" : "Main");
                   setReportParameters(reportDefController.getParameterFieldController(), null,
                             reportParameterValues, reportDefController);//.getDataDefinition().getParameterFields());
                   IStrings subRepNames = reportClientDoc.getSubreportController().getSubreportNames();
                   for (Iterator iname = subRepNames.iterator(); iname.hasNext();)
                        String subName = (String)iname.next();
                        reportParameterValues[0] = (_cache.equalsIgnoreCase("true") ? "CACHE:" : "") + subName;
                        setReportParameters(reportDefController.getParameterFieldController(), subName, reportParameterValues,
                                  reportClientDoc.getSubreportController().getSubreport(subName).getDataDefController());//.getDataDefinition().getParameterFields());
                   InputStream is = reportClientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
                 byte[] reportBinaries = new byte[is.available()];
                 is.read(reportBinaries);
                 is.close();
                 LOG.info("Completed exporting Crystal Report as InputStream using export() method: "+contactId);
                 return reportBinaries;
             catch (ReportSDKException e)
                   LOG.error("Report generating error: ", e);
                   throw new SalesforceException("Report generating error", e);
             catch (IOException e)
                   LOG.error("Report exporting error: ", e);
                   throw new SalesforceException("Report exporting error", e);

  • Problem exporting custom XML using ISnippetExport API ExportInCopyInterchange

    Does the XML generation process invoked by ExportInCopyInterchange call IXMLExportHandler implementations on service bosses?
    I cannot make it work. Following the snippet example I have created a service boss which should be recognized as an XMLExportHandler service:
       //Affects XML generation
       Class
            kJBXMLExportHandlerBoss,
            kInvalidClass,
                IID_IK2SERVICEPROVIDER,  kXMLExportServiceImpl,
                IID_IXMLEXPORTHANDLER,  kJBXMLExportHandlerImpl,
    I have written a simple class to provide kJBXMLExportHandlerImpl which implements the methods of IID_IXMLEXPORTHANDLER. When I invoke 'Utils<ISnippetExport>()->ExportInCopyInterchange the XML is generated but my class is never entered. Even the constructor is never called either during InCopy startup or the export call.
    What am I missing? I'm on Windows7 running CS6 InCopy
    Thanks for any help.

    Please print out the Verbose Stack Trace generated when you run this application.
    I suspect that you FolderPathResolver is not pointed at the directory you think it is. You might want to try printing out
    I_CurrentFolder.getAnyFolderPath();
    and I_CurrentFolder.getName();
    null

  • Lightroom 1.1 - Adobe Camera RAW 4.1 (Bridge, Photoshop CS3) problem

    Dear all,
    I am having some problems with the appearance of files developed in adobe lightroom 1.1 or in adobe camera raw 4.1 from e.g. bridge or photoshop cs3. When developing in lightroom the images look great, however when using acr 4.1 and the same xmp sidecar settings imported from lightroom, the image in acr looks very pale in comparison. For example when using the export into photoshop option in Lightroom, the image in PS3 looks very pale to the one in lightroom. The same problem persists with developing using ACR 4.1 from bridge. I have turned autotoning in ACR off. Also in the color management of PS CS3, the desaturate checkbox is UNchecked.
    I am using an icc profile for my 30" cinema display, calibrated with colory eyes pro and a spyder2.
    Has anybody had similar problems with ACR 4.1 or am I just doing something horribly simple wrong?
    Thanks for your help!
    Immanuel

    Thomas,
    thanks for your reply. In Mac OS X Preview the images look all good and very much like what I see in Lightroom. In any case not as pale or like with a slight white overcast to what I see when using ACR 4.1 from Bridge or Photoshop CS3. In PS color settings, preserving embedded profiles is checked. Yes, it seems to me as well that this is some color management issue. The 30" Cinema display was calibrated using Color Eyes Pro and Spyder2 to Gamma 2.2 and 6500 temp. However, even when reverting to the standard Apple color profile for the monitor, the problem persists.
    No luck so far...
    Immanuel

  • PDF quality problems exporting from InDesign and Photoshop

    Hi There.
    I'm having big problems exporting my InDesign files to PDFs and retaining the res. And it's not just the images (I understand about the dpi) it's the type on there too.
    I have been exporting as the preset High Quality Print - is this wrong. Are there other settings to ensure the PDF I export retains the high-res quality and clarity?
    At the moment it comes out high-res when I export it as a jpeg or eps but not PDF.
    I have also noticed the same problem when I export to a PDF from Photoshop.
    I really need to create interactive and high quality print PDFs from my InDesign files.
    Please can you advise.
    Thanks
    Karen

    I am also having problems with pdfs exported from Illustrator and Indesign recently. I didn't have these problems before, so I don't kno if something has changed in my settings that I am unaware of.
    When I use the 'japanese dots' border in Indesign, it shows on the pdf as a kind of dotted line. I'm exporting as 'High Quality Print'. I switched to Illustrator and drew a line with the pen tool, and converted it to a dotted line; it looked just how I wanted in in Illustrator, but as soon as I exported it, the same thing happened.
    I have used the 'japanese dots' border in the past, exporting as 'High Quality Print', and not had this problem.
    Does anyone have any suggestions?

Maybe you are looking for