Problems extracting LR5.6 upgrade files after download

Hello!
I've just completed installing a LR5 upgrade from a DVD.
After this, I downloaded the latest upgrade which i this case was is LR5.6.
My problem is that I am unable to extract the files in the upgrade.
I just get a message from the installer telling me that there is a problem extracting some files and to check that there is enough memory on my computer. The message also suggest to check that I am authourized to use the target folder for the extraction.
I've reinstalled LR5, I've tryed downloading a new upgradefolder several times, I've tryed extracting it in different folders.
There is enough memory and my computer system meets the requirements. (I'am the administrator of course.)
Anybody has a solution?
Thanks in advance!
Felix
PS below is an image of the message I get when trying to extract files (in swedish though).

Hello Jeff!
And thanks for your answer.
Yes i've tried extracting/installing both updates (5.5 and 5.6). The outcome was the same in both cases. Same message with 5.6 as the one in my screenshot.
There is some information in this but I can't figure out what it is.
Felix
Skickat från min iPhone
29 aug 2014 kl. 22:50 skrev Jeff A Wright <[email protected]>:
Problems extracting LR5.6 upgrade files after download
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Felix2 from your screen shot it appears you are attempting to download and extract the Lightroom 5.5 update/installer. Do you receive the same error downloading the 5.6 update at Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.6? Each update contains the full installer so you do not need to have a previous version of Lightroom installed prior to installing Photoshop Lightroom 5.6.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685604#6685604
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Similar Messages

Problems extracting Lightroom5_6 upgrade files after download

Hello!
I've just completed installing a LR5 upgrade from a DVD disc.
After this, I downloaded the latest update which in this case was Lightroom 5.6.
My problem is that I am now unable to extract the downloaded update files.
I just get a message from the installer telling me that there is a problem extracting some files and to check that there is enough memory on my computer. The message also suggest to check that I am authourized to use the target folder for the extraction.
I've reinstalled LR5, I've tryed downloading a new update folder several times, I've tryed extracting it in different folders.
There is enough memory and my computer system meets the requirements. (I'am the administrator of course.)
Anybody has a solution?
Thanks in advance!
Felix
PS below is an image of the message I get when trying to extract files (in swedish though).

Hej Dave,
And thanks for your tips!
I've actually tryed both the update 5,5 and the 5,6 with the same result and the screenshot just happened to be for 5,5.
I've now also tryed extracting the the updatefile using both winrar and winzip but the problem is that it is an exe-file (program file).
So no luck there and I dont know of any software that "extracts" / unfolds a program file. Do you know of any such software?
Thanks anyway
Felix

My Safari can´t open .dmg files after downloading

I updated to Mac OS X 4.9. But since this update, Safari cannot open .dmg files after downloading! On 10.4.8 it was not a problem. What can I do?
eMac G4 PPC Mac OS X (10.4.9)

Darn...I thought that would do the trick.
Given the other problems you mention, more and more, it seems a reinstall of the OS, using Archive and Install is going to be necessary. Have you ever done an Archive & Install of the OS? Important you carefully read the description of the process. If you are uncertain, I find the Take Control Upgrading to Tiger E-zine to be a very helpful guide.
Once you reinstall the OS, then you can upgrade to 10.4.8 using the combo update, repairing permissions via Disk Utility in your Utilities folder when complete.
One question: Not sure why you have run into all these problems on the 10.4.9 upgrade. It worked without problem for me. Anything unusual happen during the install?
Message was edited by: Hawaiian_Starman

Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5

Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5?

Only Apple knows the answer to whether or not there is a verified problem and if so when will a fix be released. As is their custom, Apple does not talk about these things and the rules of these communities prohibit speculation about future udates or upgrades. It is probably safe to say if a fix is deemed necessary it will be called OS X 10.8.6.

Unchecking 'Open "safe files after downloading' not working

After unchecking "Open 'safe files after downloading'", files open anyway and do not download to the specified directory (Safari 2.0.4). Instead, I am forced to preview them, and have to manually save. I had this option unchecked on my Powerbook G4 (Safari 1.3.2), and it worked without problems. Any suggestions?

I'm geussing you're using Safari as your internet browser? Try Firefox as a browser. It will allow you to view PDF documents in the browser itself, without downloading the document to your Download folder and it doesn't require Adobe to do so.

"Open safe files after downloading" option stopped working

Hello,
the safari "Open safe files after downloading" stopped working. Even when is checked, it doesn't open anything, no jpgs, no dmgs, no zips. Not sure what could've happened. I installed the new Safari 4.03 update and Speed download today. Any ideas what may be causing this problem? Thank you

Hi Steve
One suggestion is to create via the Finder a specific download folder for your attachments. Then in the Finder, drag the folder to the sidebar. Now in Mail, when you save the attachment, simply click on the sidebar location to facilitate the save. Then, go to the Finder, click on the sidebar folder for easy access to the attachment. Remember too, Mail attachment save feature gives you the option of directly importing any images into iPhoto.

Anyone having problems getting CD covers to print after downloading latest software?

Anyone having problems getting CD covers to print after downloading latest software?

Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties.

Malware - Safari users - disable Open"safe" files after downloading

For those not aware there's some malware floating around which goes by the name of MacDefender and other variants.
It's a scam that may show a page suggesting 'virus' infection on the user's machine and/or download an installer file.
Visiting malicious sites or apparently just browsing some Google Images searches will automatically download a zipped file. If the Safari Preference to Open "safe" files after downloading is checked it will unzip and run the installer for the malware.
While installing requires user intervention to click through the installation, the most recent variant will apparently install for a user without needing an administrator password.
Once installed the malware apparently opens unsavoury websites randomly and prompts for credit card details to remove them.
This is unpleasant scareware to steal your credit card info.
Beware.
AC

just for information (in case you haven't seen these yet):
Mac OS X 10.6 Help: What is malware?
How to avoid or remove Mac Defender malware
Mac Virus/Malware Info
Identifying and removing MacDefender trojans

Safari won't open docx files after download

The "open safe files after download" button is checked. I unchecked it, shutdown safari, rechecked it and it still isn't working.

How do I get that file type on the "safe to open" list?
I'm not sure there is any way to do that, and if there is, I wouldn't recommend it, because Word files are not necessarily safe to open -- they can include harmful macros. You can try the suggestion linked below, but I haven't tested it.
OSX 10.6 Download Assessment Safe Files

TS1363 Is anyone else suddenly getting this problem on both iPod & iPad immediately after downloading the last upgrade to iTunes 10.6.1.7?

Is anyone else suddenly finding that iTunes is not recognising both iPad & iPod when trying to sync via a PC AND that this problem started immediately after downloading the last upgrade to iTunes 10.6.1.7 to said PC? Im loathed to waste time following the recommended steps on the Apple help site to find that the problem is the new iTunes version.

Your article is for earlier version of iPods.
You should refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

Problems printing old files after downloading Adobe 11

I cannot get my pdf files to print after downloading Adobe Reader 11. I had 9 & now every time I want to print it takes me to the Save As.. file & wants me to save as .pm file. It won't even let me save as a new pdf file saying the file is corrupted. Help!

I took it back to Adobe reader 9 & now my pdf files say there's no pages to print even though I can see them in the file. I did have print tyo file checked so I took it off & it still can't read any pages.

Corrupt aac files after downloading from iTunes!

Hi,
the download manager of iTunes is bad! If downloads are interrupted and resumed later (lack of electricity supply, disruption of the Internet connection), then aac files are not valid! Such a file stops playing in the middle of the song, for example. Yesterday I checked my library (with Parallels Desktop + Win XP + foobar2000 + foo verifier) and I found 45 invalid aac files! All of these files I recently downloaded (iTunes Match matching process).
Why iTunes don't check the file size or a checksum after downloading???

Yes. I've had and continue to have this problem of a small number of songs getting downloaded corrupt when updatings songs via iTunes Match.
Deleting and re-downloading from iTunes Match is the only solution I have found for the problem as I am having it: the songs ARE corrupted for me, and it's not just a metadata problem. When I open the songs in an audio editing program you can see that the audio just isn't there: the data stops before the end of the song (somewhere between 50% and 70% through the piece, usually). So copying it to another computer or re-importing it won't fix anything.
The problem is that iTunes doesn't KNOW which of the songs I've matched-then-downloaded via iTunes Match are bad, and I won't know either until I happen to play one that skips before it ends.
Here's the only solution I've found that will inspect these songs one at a time and list the bad ones:
Create a Playlist of all songs you've downloaded (upgraded) via iTunes Match.
Plug in an iPod (etc.) and wipe out whatever songs are on it already.
In the iTunes setting for that iOS device, tell it to recompress the songs to 128k AAC as it puts the songs onto the iOS device.
Now sync that entire Playlist to the device and wait.
Result: all songs that cannot be down-converted by iTunes to 128k AAC (because the song data is bad) will be listed in the resulting error dialog.
Here's the total suck part: iTunes doesn't let you save that list of errors off to a text file. You have to do one or more screen captures and save off the list, then manually go find those songs, delete them and re-download them from iTunes Match. Total PIA but it's the best I have come up with, since I can find no other utility or means to batch-check that these files are valid.

Invalid File after Downloading from Database using JSP/JDev 10.1.2

Hi, i got a problem when i download a file from my blobColumn in database.
Well, actually i got no problem in reading the file out of database, but when i download this file, there are 3 more bytes then in the original one in Database...
Here's my java-code in the jsp-page i used as "save as" field:
Hashtable ht = Dokument.createDOK(request);
String dateiname = (String)ht.get("Dateiname");
byte[] fileBytes = (byte[])ht.get("Dokument");
ByteArrayOutputStream ba = new ByteArrayOutputStream();
ba.write(fileBytes);
// RESPONSE
response.setContentType("application/octet-stream");
response.setHeader("Content-Disposition","attachment; filename=\"" + dateiname + "\"");
// DOWNLOAD
OutputStream outs = response.getOutputStream();
ba.writeTo(outs);
outs.flush();
outs.close();
}catch(Exception ex){
ex.printStackTrace();
for testing i used a simple text file with 28bytes:
begin----
Test Zeile 1.
Test Zeile 2.
end-------
after downloading this file it looks like:
begin----
Test Zeile 1.
Test Zeile 2.
end-------
There are 3 bytes 0A(hex) at the beginning...
I dont know why.
after closing "outs" i made system.out for checking the amount of bytes in "fileBytes"-Array, and it was correct, just the 28 bytes like in the file from the Database.
But i actually dont get, why there are 3 more bytes at the beginning after downloading it.
The main problem is, some other files like word or excel documents cannt be opened, because of this 3 bytes at the beginning, and they seem to be invalid.
Would be glad if someone can help me, got really stuck and have no idea any more.
Thanks
Sebastian

Dont someone has a solution, or got a similar problem ?
Thought about it could be a bug in the basic java classes of JDev 10.1.2
but i dont really know...
Have no idea left.
Sebastian

Unable to open existing PDF files after downloading Adobe reader

I have an Advent 7085 PC with Windows XP Home version 2002 service pack 2. After downloading the latest Adobe Reader 8 I cannot open any of my existing PDF files, nor can I open any new ones. I have several times downloaded it, tried it and found it doesn't work so have then deleted it from the system and rebooted. Downloaded again only for the same thing to happen again. Error message says that Adobe Reader 8.1 has encountered a problem and needs to close. Then I am advised to let microsoft know of this problem.
Please!!! Is there anybody out there who knows what the problem might be and help me resolve it?
Thanks
IG

I finally called tech support and this is what we did and it worked for me...First go to start/control panel/add&remove programs. Once the program list is configured, hilite Adobe reader and select remove. Once the program is removed, from the control panel select user accounts. Set up a new user account "test". Through user "test" go into www.adobe.com and select icon to download adobe reader. You do not need to run media player, remove check unless you want to download it. After program is downloaded and copied you can close out of adobe. At that point I was able to open my PDF files without any error message. Tech advised me to keep the "test" user set up, doesn't hurt anything to have it there. He told me that there probably was some settings under my user account that was causing a glitch in the download and that is why we opted to download through a new user account. BTW the tech support was free if you still can't get it to work. Good Luck

Experiencing corrupted / unreadable files after download

I have a quad core mac pro running snowleopard. Recently I've noticed that I've been having more and more files be unreadable after having been downloaded over the internet. This happens both after downloading from an internet browser, downloading through a 3rd party downloader client (Continuata), as well as syncing with Dropbox.
Given the increasing frequency in which I am encountering unreadable files (i.e. when you try to open or move a file and you get a finder error that says the operation can't be completed because the file cannot be read error -36).
From what I've read this can be due to either software problems or hardware issues. From my personal experience I get the feeling I'm probably dealing with a hardware problem, but I not sure where to start. Most of my problems DO seem to occur on a single internal hard drive, but the diagnostic tests I've run speak nothing but love for the health of the drive (disk utility repair, various Drive Genius 3 tools).
Further information: I use dropbox and sync many times a day with other peoples shared folders. I also use Synergy, the mouse/keyboard sharing over the network software (and it's slightly buggy).
I've repaired permissions a bunch of times, never had any problems to be repaired. Nor have I had any problems to be repaired when I do repair disk.
Is it possible my network adapter might be going? Or some other internal hardware component on the motherboard?

Mac Pro 65lb tower uses Error Corecting Code (ECC) Memory, so memory problems are not your issue, or you would be getting kernel panic, machine check.
The individual data blocks on Disk are recorded using an error-correcting code. Simple problems are corrected on the fly, serious problems cause big delays and an I/O Error.
The communications interfaces use error detection codes, and errors there would cause re-transmission. Repeated problems would slow your connection and eventually cause errors.
The most likely problem is the type that will be fixed by Disk Utility (Repair Disk). That is, if the free list is incorrect, and a block gets inadvertatly re-used before its time.
This also could be a problem with "crazy software". If you tend to load up your machine with lots of third-party gadgets, you will make it unstable.

Problems extracting LR5.6 upgrade files after download

Similar Messages

Maybe you are looking for