Problems F3507f Broadband Device on T500 with Windows 7 64-bit

Hi,
I have installed Windows 7 64-bit on my T500 (model 2082-8WG). I dont get my Broadband Device working.
In Access Connections the Device is turned OFF and I cannot turn it on. Strange is that the lights on the laptops indicate that de Broadband device is turned on (together with WLAN and Bluetooth).
I installed all latest drivers (also the AT&T/Vodafone HSPA driver) and BIOS. When I start Mobile Broadband Connect i get the message "no Wireless Mobile Broadband device found".
Does somebody have a clue, or is someone familiar with this problem?
Regards,
Edwin de Jong

In the meanwhile Rev 04 of the driver was published. This version is binary different to Rev 03 and - surprise - it now says correctly after unpacking it will install the 64-bit version. But after that same problem as before, "no compatible device found".
I did some searching into the files of 6md647ww. I guess the file Display.Driver\NVLT.inf contains a list of compatible devices - in this file the sections labelled NVIDIA_SetA_Devices.NTamd64.* list a lot of device-ids, for example PCI\VEN_10DE&DEV_0A3C&SUBSYS_214517AA and many more. The device id of the graphics card for a system can be found in the hardware/device manager of windows, I obtained that for my card and this id doesn't show anywhere in NVLT.inf. So if my guess is correct, it is no wonder the installer says "no compatible device" since the device id of my card is not listed in NVLT.inf.
Please note again that all previous versions of lenovo drivers for my NVIDIA Quadro FX 3800M did and do install without absolutely any problem!
This is strange, readme of the current driver version definitely says NVIDIA Quadro FX 3800M is supported by this driver, but the driver doesn't seem to contain the device id for it. Looks almost like the wrong driver was used / bundled into 6md647ww.
And again the question to the board / administrators if lenovo technical support is reading here and is there another contact at lenovo where I could direct my problem to? I am still having the sporadic heavy crash issue which is very dangerous since it can happen any time if displaying whatever graphics in whatever software and which therefore has a high risk of data loss. Also, installing the plain NVIDIA driver directly in the current version still has the problem of flickering and color errors, so this isn't a solution either.
Best regards, Michael

Similar Messages

IPhone 3GS SYnc problems with Windows 7 64 Bit

I am having sync problems with windows 7 64 Bit.
The iPhone syncs a few tracks then hangs, a few minutes later itunes tells me the iphone has timed out.
Anyone have any ideas about this. I have tried different USB ports, cleaned the apple USB cable contacts with Servisol, restored the iPhone and reinstalled itunes.
iPhone and iTunes are latest versions.
Thanks
Joe

"Try this connect the iPhone, let the mtp driver installation fail, then go into the device manager and uninstall the unknown mtp device. If you then scan for new hardware from the device manager it should recognize the iPhone & update the driver."
Ok here's what I did:
1) Connect the iPhone (iTunes had been installed)
2) No MTP driver installation is happening as Windows detects iPhone successfully
3) Open Device Manager
4) There seems to be 2 drivers for iPhone that are active now, although I still can't see which one is the MPT driver you're referring to.
One of them sits under Portable Devices: "Apple iPhone". If I view the details of this driver, it lists the following files:
- C:\Windows\system32\DRIVERS\UMDF\WpdMtpDr.dll
- C:\Windows\system32\DRIVERS\winusb.sys
- C:\Windows\system32\DRIVERS\WUDFRd.sys
- C:\Windows\system32\WpdMtp.dll
- C:\Windows\system32\WpdMtpUS.dll
The other one sits under Universal Serial Bus controllers: "Apple Mobile Device USB Driver". And as indicated by Joe above, it lists the following files when I view the Details:
- C:\Windows\system32\Drivers\usbaapl64.sys
- C:\Windows\system32\usbaaplrc.dll

Qualcomm Mobile Broadband Gobi2000 compatibility issue with Windows 8 and above

I am facing Qualcomm Mobile Broadband Gobi2000 competibility issue with Windows. Previously, after installing windows 8, I faced a problem of random shut down. But, after running registry and malware scan, it's now almost settled . But, my Broadband modem randomly stops working , and Windows Action Centre points it out as "USB Modem Qualcomm Mobile Broadband Gobi2000 is not competible with current version of Windows". It further suggest to contact HP for resolving the issue.

I have called HP-Support and the answer was:
«Thank you for contacting HP Active Chat Support.
This is in continuation to our response with regards to your chat ID: 63381567
As for the case logged in for compatibility issues after upgrading to windows 8.1, kindly try the steps below and see if that helps.
Start the computer.
Press the F10 key to enter the BIOS setup.
Select Restore Defaults .
Under Load Defaults , select Yes .
Choose Save Changes and Exit .
Under Save Changes and Exit , choose Yes .
If Microsoft Windows does not recognize the external USB WWAN modem module, try the steps below:
The Telephony Service has been disabled. Follow these steps to enable the Telephony Service:
Open Control Panel .
Expand View by: and select Large Icons .
Click Administrative Tools .
Double-click Services .
Double-click Telephony .
Under the General tab, expand Startup Type , then select Automatic .
Click Apply , click Start , then click OK .
Restart the system.
If the issue still remains the same, kindly contact Microsoft or we would request you to be patient while we have more drivers available on the HP website.»
The issue was not resolved.
So I'm waiting for the release of the new driver...

Flash player 11.0.1.152 installation problem with Windows Vista 64-Bit

Hello,
I just can't get Flash Player to install on my computer with Windows Vista 64-Bit - doesnt matter if I try with Firefox, Opera or IE (I usually use Firefox).
The download isn't a problem, but when I start the downloaded .exe, this file just disappears from my download folder and nothing happens - besides starting a process called install_flashplayer11x32_mssd_aih_3.exe, which does nothing. The usual installation popup never appears. After that I can't try starting the installation again, until disabling the process via task manager ("Only a single instance of this application may run"). Doesn't matter if I try the download and installation with or without "McAffe Security Plus" btw - same result.
I never had such a problem before - Flash Player 10.3 was and is no problem to install and use.
I have tried all the measures suggested in the troubleshooting section on the official site, including the advanced troubleshooting measures (uninstall old version, run as administrator, disabling software firewalls, disabling virus scanner etc.). Nothing helps.
I don't got those problems with my laptop running Windows 7 - just my desktop computer with Vista 64-Bit.
Any help would be greatly appreciated.

Try using the installers from the links in http://forums.adobe.com/thread/909550
P.S. topic moved to the Installation section of the forum.

Adobe Prof 7 problems with Windows 7 - 64 bit

My laptop crashed and I just purchased a new comptuer with Windows 7 - 64 bit. Now have 2 problems with Adobe:
#1 When I right click on a web site to save as PDF, it won't work. There is no error, no response. Just doesn't do anything
#2 If I go to a web site requireing Adobe Flash Player Installer and I click to install it... nothing happens.
Please help!
Thanks Mary

Adobe Acrobat 7 surely isn't supported in Windows 7. Heck the newest version probably isn't either (I haven't checked).
That being said, right-clicking to save a file doesn't involve Acrobat and neither does installing Flash Player.

Adobe PDF Printer not working as print driver; 9.5.5 (pro) with Windows 7, 64 bit

I have installed, repaired, uninstalled and re-installed Acrobat Pro 9.5.5 on a newly formatted SSD with Windows 7, 64 bit on my desktop machine. The program was installed from Acrobat Pro 9.0.0 and updated within the program. I have the program also installed on my laptop, and the Adobe PDF Printer driver is working properly on my laptop.
On my desktop with the newly formatted SSD, the Adobe PDF printer driver is not working. Note that I am using the printer driver, and not any pdf creation techniques within MS Office or other programs.
When I go to the Adobe PDF printing preferences on my desktop, I only get a generic, two tab window open. When I print a file to this printer on my desktop machine, I do not get a window opening that asks where to create the pdf or what to name it, and I never see any files created. In MS Word, the Create PDF option under the Acrobat tab works and opens a dialog to ask the name and location to save, and then opens a PDF Maker progress window and properly creates the file. I can also save a file as an .eps or .ps file and use Distiller to create the pdf. However I cannot get the Adobe PDF printer driver in my Devices and Printers to work properly, although it works just fine on my laptop with the same program (Pro 9.5.5) and same Windows version (7, 64 bit).
Repairing, uninstalling and re-installing does not solve the problem. Acrotray.exe *32 process is running. Any ideas on why this won't run properly on my desktop, but will run on a similarly configured laptop?
On my laptop, I get a full, (7) tabl menu with all the normal options:

I found this answer from Deepak Chauhan on another forum, and it solved this problem!
Try this to add Adobe PDF printer manually on Windows 7, and Windows Vista.
If windows 7 is Enterprise or better edition: (Admin rights required)
Start>search for printmanagement.msc and open the print management module
Expand the print server and expand the computer name to see availbale printers, drivers and printer ports.
- from printers ensure there's no Adobe PDF printer, if there is delete it
- go to ports and delete the PDF ports (the ones ending in *.pdf)
- go to drivers and delete the PDF converter.
Take note if any errors occur, but continue with the following steps regardless.
If on windows 7 home edition, just goto start>Devices and Printers and ensure PDF pritner is not listed.
Then open the registry (if any erors deleting these keys happen, see below)
1: go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers
delete any adobe PDF printer subkey present
2: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
delee the PDF port monitor if present
3: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
again delete and pdf printer subkey
If any erros occur, you need to set the owner of the key to the currently logged in admin user, then ensure that user has full control.
Do this by right-click the key and selecting permissions, clicking on advanced, then the owner tab.
Once you've all that has been done, open a command line as administrator.
Copy and pate the following commands in order
1: net stop spooler
2: rundll32.exe setupapi.dll,InstallHinfSection AdobePDFPortMonitor 128 C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf
3: net start spooler
4:rundll32.exe printui.dll,PrintUIEntry /if /b "Adobe PDF" /f "C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf" /r "Documents\*.pdf" /m "Adobe PDF Converter"
That should set back the pdf printer.
This seemed to provide the link that provided the Adobe PDF Settings tab to the Adobe PDF Printing Preferences that was missing!

HP Laserjet p2015d auto duplex printing with Windows 7 64 bit operating system

I have used the HP Laserjet p2015d with Windows 7 32 bit operating system and have been able to use the AUTOMATIC DUPLEX feature of the printer without problems.
Now, however, I have installed the 64 bit version of Windows 7 operating system and the AUTO DUPLEX does not work and is not shown as being available on the PROPERTIES menu of the printer.
Is it possible to use the AUTO DUPLEX feature of the printer with Windows 7 64 bit operating system.
All replies welcomed! Aaron in Calif.

Hi Aaron,
Make sure the Automatic Duplexing option is enabled:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Now Automatic Duplexing should become available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp pavilion dv6-1030us with windows vista 64 bit now upgraded to windows7 32 bit.

hp pavilion dv6-1030us originally with windows vista 64 bit now upgraded to windows7 32 bit. mic is unable to send sound in skype after upgradation.
This question was solved.
View Solution.

Hi,
Try the following.
First, uninstall Skype and when this has completed, restart the notebook.
When windows has reloaded, download and reinstall the Chipset driver Here.
When the installation has finished, restart the notebook again.
Let windows fully load, then download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45044.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Reinstall Skype and see if the Mic now works Ok.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Compatiblity of iPod and iPhone 3gs with Windows 7 64 bit operating system?

Will the ipod classic anf the iPhone 3gs have software that will work with Windows 7 64 bit operating system?

Hi Aaron,
Make sure the Automatic Duplexing option is enabled:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Now Automatic Duplexing should become available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP laserjet 1300 with windows 7 (64 bits)

Please help me to find why my printer Hp LaserJet 1300 cannot print more than 1 copy with Windows 7 (64 bits). Is a new driver to solve this problem.
Thank You
HiRichard

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Want to use Premiere Elements 4 or newer with Windows Vista 64 bit??

We bought a new pc with Windows Vista 64 bit - but are now having problems using my Photoshop Elements6 and Premiere Elements 4 with our new pc. it says on the box and on the web - that it is compatible with Vista - so why isn't it working for us? Do i need to buy something else - and if so what?

I am not sure completely about Photoshop Elements - but my main issue is with Premiere Elements....i need to find a program that will work so i can work with all my videos. Trying to find out why it doesn't work or how to get it to work.
Date: Mon, 8 Jun 2009 21:24:11 -0600
From: [email protected]
To: [email protected]
Subject: want to use Premiere Elements 4 or newer with Windows Vista 64 bit??
What problems with PSE?
>

Extigy with Windows 7 64 bit

Hey everyone,
I've got a SB Extigy which has served me just awesome for years and years now. ?I recently upgraded to a better computer with Windows 7 64 bit, and have found that the driver CD which came with the card will no longer install on this OS. ?Windows will recognize it; the rear stereo out and the headphone out are acti've (both at the same time!) however the volume control knob no longer works, the remote doesn't work (I mainly use it just for volume) but most importantly the MIDI ports don't work. ?I use this computer to make music, so I really need to get the MIDI ports operational or get a new card. ?Since this card has been working so beautifully for so long, I don't want to switch unless I absolutely have to. ?I have tried running the CD install in compatibility mode for XP/2000 but no dice. ?I found [url="http://forums.creative.com/t5/Windows-7/Extigy-Drivers-for-Windows-7/m-p/54202" rel="nofollow">another thread[/url] on here where this guy seemed to get it to work, but didn't really leave instructions as to how. ?He gave[url="http://members.driverguide.com/driver/detail.php?driverid=93720" rel="nofollow"> this link [/url]to download the drivers, but there is no exe in there.... how can I install these drivers without the installerI went to the device manager and tried to do an update driver with the source pointed to these files, but I informs me I currently have the most up to date driver already installed.
I'm hitting a dead end here. ?And would be immensely grateful for any helpful suggestions. ?THX!!

i have sound blaster extigy and i didn't use it win7 64 bit

Broken ATI Mobility FireGL V5700 for W500 with Windows 7 - 64 bit

Hello all,
My setup is Lenovo Thinkpad W500 with Windows 7 - 64 bit
Display card is a ATI Mobility FireGL V5700
My graphics drivers used to be functional but now I have lost a lot of functionality (mostly graphics issues).
My two biggest issues are:
Many video games will crash/break because of my drivers apparently
Lost switchable graphics completely (the ability to change from FireGL V5700 to the low power card)
To clearly state: It is impossible to download these drivers from AMD, AMD themselves tell you to go to Lenovo
This is because Lenovo is responsible for the display card drivers in their own laptops.
I have not modified my computer. I believe that Lenovo's updates broke my laptop's functions.
How do I FIX this??
Nothing works from Lenovo's website. I've installed all their updates and the issues persist.
The Lenovo Solution Center tells me that everything is up to date.
Windows Update tells me everything is up to date.
I am NOT reformatting my computer, that is a rediculous thing to say when everyone is clearly having this issue.
What is the deal here? This laptop cost a very large amount of money and now it just broke itself? I don't believe it.

Ok thank you, this is likely a BIOS related issue now.
As you can see, Power Manager does not provide a switchable graphics option:
Device Manager only recognizes the high power graphics card (FireGL V5700) and not the low power card
Here is my BIOS settings for the display adapter:
Default Primary video Device: INTERNAL
Boot Display Device: THINKPAD LCD
Graphics Device: DISCRETE GRAPHICS
OS Detection for Switchable Graphics: DISABLED

Adobe Photoshop Elements 10 compatible with windows 8 64 bit?

Is Adobe Photoshop Elements 10 compatible with windows 8 64 bit?

All Elements versions for Windows including PSE12 are 32 bits applications which can run without problems on Windows 64 bits.
You can download the free 30 days trial version to see by yourself.
(The 'Premiere Elements' for Windows is 64 bits. PSE12 for Mac is 64 bits)

Is itunes compatible with windows 7 64-bit

Is iTunes cmpatible with Windows 7 64-bit? I just had to get new computer and got rid of Vista.

Apple has JUST RELEASED a version of iTunes that is compatible with Win7 64 bit!!!!!!!!!!!!
Go to Apple.com, select download for iTunes, When you select the Win OS you'll see a message in tiny blue print that there's a special download for Win7 64, click on that, then download. I had to disable the Windows Firewall to get the download. I run AVG as my protection system.
I have Win7 64 and have been having compatibility problems for the past few weeks after recent automatic Win7 updates and the iTunes 10 upgrade. I am still having freeze problems but not as bad.

Problems F3507f Broadband Device on T500 with Windows 7 64-bit

Similar Messages

Maybe you are looking for