Problems fading sound clips in and out in iM 6 HD

I have imported a MP3 music clip into my movie timeline. It plays fine on playback.But when I share with iDVD, and test it on my computer or a DVD player the fade in/out on that specific spot is very abrupt and erratic and sounds quite terrible. I have tried changing frame rate settings from 29.97fps to 25 fps ( We run PAL and not NTSC) here in South Africa. I've even tried importing the original MP3 as an .AIFF and even a Quicktime movie from Quicktime Pro. After writing the DVD, the fade ins and outs sound terrible, no matter what I do.
out of options

Hi Squid, welcome!
You can't use PAL at anything but 25 fps!
How are you setting the fade? Usually one 'extends' the timeline and manipulates the volume there.

Similar Messages

  • Xfinity X1 - TV Sound Cuts In And Out When Connected to Surround Sound Receiver

    I'm a fairly new Comcast Xfinint X1 TV and Internet subscriber.  I am experiencing issues with TV sound cutting in and out.  The sound cuts out for 2-3 seconds, all the time.  The Onkyo surround sound receiver has been used without issue on a different cable TV platform so I know there is nothing wrong with the receiver. System set-up. Voice/data modem - Arris Interactive, LLC - tg862gCable Box - Make/Model - PA px001ancSurround Sound Receiver - Onkyo TX-NR609 HDMI cable run from cable box to Onkyo receiver.  HDMI cable run from Onkyo receiver to TV.  I have reset all equipment multiple times with no resolution. Any help would be greatly appreciated as it is very difficult when trying to watch TV. 

    I highly doubt your modem has anything to do with this because it doesn't have MoCA.However it sounds like you an original green power light Pace DVRs and they are well known to have audio dropout issues. I would replace that DVR with a different version.
    Is this problem happening on a specific channel? CBS seems to be having issues lately. I am watching the CMA awards right now and I have heard the volume change a couple times but this is the only channel it is happening on which would suggest it is not Comcast's fault.
    spv510erp wrote:
    I'm a fairly new Comcast Xfinint X1 TV and Internet subscriber.  I am experiencing issues with TV sound cutting in and out.  The sound cuts out for 2-3 seconds, all the time.  The Onkyo surround sound receiver has been used without issue on a different cable TV platform so I know there is nothing wrong with the receiver. System set-up. Voice/data modem - Arris Interactive, LLC - tg862gCable Box - Make/Model - PA px001ancSurround Sound Receiver - Onkyo TX-NR609 HDMI cable run from cable box to Onkyo receiver.  HDMI cable run from Onkyo receiver to TV.  I have reset all equipment multiple times with no resolution. Any help would be greatly appreciated as it is very difficult when trying to watch TV. 

  • Have the same problem tried the signing in and out, rebooting, uninstalling and back again nothing is working, on 4th download of creative cloud still coming up with lightroom 5 after signing in anf out, also signing out dowloading and signing in, spent 2

    have the same problem tried the signing in and out, rebooting, uninstalling and back again nothing is working, on 4th download of creative cloud still coming up with lightroom 5 after signing in anf out, also signing out dowloading and signing in, spent 2 days on this, just cannot spend days on trying tricks and hacks

    I  am getting so mad because I cant even sign out OR quit! They are both grayed out. I have the spinning blue wheel in my apps and am trying to fix that but none of the solutions are working.

  • Problems with sound clips after conv. iMovie project via mediabrow. to iDVD

    I have made a 30 min long project with 80 small video clips. The project is alright when viewing it in iMovie, but after I have prepared via the mediabrowser and thenaften view the project in iDVD - every other sound clips is without sound and on some video clips it mixes some soundtracks from other tracks into it. Any ideas, I'm getting very frustrated
    Thanks in advance

    I'm having the same problem. Everything plays beautifully in Imovie and then when its shared with idvd or media browser it all goes weird. I get sound from footage that I either haven't used at all or audio that I have detached and deleted playing over the top of other bits, or sound going out of sync.
    All my video footage was shot with 12 bit audio. For most of the footage that I've used, I've detached and deleted the original audio and put other tracks over the top, the footage that still has it's original audio, I've converted so it has 16 bit audio. I hoped that would solve the problem but my newest version of the video seems to be worse than before.
    Everything plays fine in imovie and then warps when it's shared.
    Any ideas would be greatly received as I am going crazy and wasting a heck of a lot of time that I don't really have!!!

  • Sound cutting in and out on Macbook Pro 15 (original) when waking display

    When I wake the display from sleep, any audio that was playing when the system went to sleep - or rather, the display went to sleep (ie: pandora, QT movie, etc), immediately starts to cut in and out and gets glitchy. This happens as soon as I move my mouse and get the dialogue box to enter my un/pw to wake from sleep. The only way to resolve it is to quit the application putting out the audio, and then open it up again. Once I do that, the problem goes away.
    Currently running 10.6.2, but have had this problem since upgrading to Snow Leopard. I've searched the forums and can't seem to find any answers. There are a lot of vague sound issues with MBP and this is a hard one to "sum up" in the subject line. Any help would be appreciated. Thanks.

    I've searched the forums and can't seem to find any answers.
    Not even quitting out the audio application prior to letting your computer sleep?
    Not sure what you have already tried from searching the forums. If you have Applecare, give them a call or take your computer to an Apple store. Let the Geniuses there check it out.
    Message was edited by: CMCSK

  • Color is changing the clips in and out points

    I tried to import into color a fcp7 sequence.  The original footage are quicktime clips.
    When the project opens in color, the in and out points of the clips are not there and it gives me the beginning of the clip.
    With other footage that I ingested in FCP I don't have a problem.
    Can someone explain this to me.
    Thanks

    >The original footage are quicktime clips.
    What FORMAT of Quicktime?  Because QT is just a container that can be one of a dozen codecs.  Color ony works with certain codecs, like ProRes, HDV, XDCAM, DVCPRO HD.  If the codec is anything but those...it will have serious problems.

  • Sound cuts in and out

    I am running Mainstage 3.0.3 on my MacBook Pro - 13" (early 2011), OS X 10.9.1, 2.3 GHz Intel Core i5 processor, 8GB RAM and running on a Samsung 500GB SSD drive. I am plugging in a bass through an M-Audio USB Fast Track.
    Using this right now simply to play along with tracks on iTunes (for practice). Used to use Garageband for this, but then I got Mainstage. Mainstage 3 was running fine when I first bought and downloaded it. Not sure what the problem is now, but when I open it and create a new concert (bass-rig) then turn the master volume up, the slider movement is choppy and the sound/signal cuts in and out (more out than in). The only time I can get sound to consistantly come out is if I click on a menu option, like File or Edit or Action, etc... if I click off the menu, the sound cuts back out and I get nothing.
    Sound works perfectly fine through Garageband with the same setup.

    That's the model of your processor in your HP P6350z. Do you have a discrete (separate) audio card in your PC?  When you purchased your PC did you add a separate audio card?  If not, then go to www.realtek.com and download and install the latest audio drive for the Realtek ALC888S.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • MacBook sound cuts in and out & getting a beach ball a lot.

    When I try to play a video the sound either cuts in and out or just stays off. You can barely hear a small popping noise through the speakers. The chisel also lags very band making it impossible to watch, it does not matter if the video is online or on the computer itself.  I also get the beach all allot even sometimes just using Word. Is there any way to fix this without wiping the hard drive?
    Here is a video if this will help
    http://www.youtube.com/watch?v=V3NYtPt0vIc&feature=youtube_gdata_player

    Hi I have experienced this problem also, especially when listening to mp3's. At first I thought the quality of mp3 was the cause (as in different encoding quality) but it seemed to happen when playing DVD as well. I don't think a reboot will solve the problem for good, as it happens quite randomly. I have a sneaking suspicion that the internal speakers may be at fault. doesn't hurt to get apple to check it out while under warranty.
    15"PBG41.5ghzAL   Mac OS X (10.4.5)   1Gb RAM 30gb free space

  • I just updated my phone and now my phone is acting up. Now while playing my ipod music the sound fades in and out how can i get this to stop and play whole song?

    ok so last night i finally decided to do the upgrade on my phone... well i guess BIG mistake.... now my phone is tripping.... my apps arent working right.... had to delete fb several times..... my photos wouldnt load back up....and my ipod music wouldnt upload for @ least 2 hours.... really krazy... well im frustrated cause i really wanted to listen to my music and when i was trying to do so my sound kept going in and out..... all by its self.... how in the world can i fix this problem?????? HELP PLEASE!!!!!!!!! Oh and i have tried resetting my phone several times with no such luck.....
    Also side note my phone is really really slowwwwwwwww now!!
    thanx again

    But I do back up everything, as much as I am able...
    However, it seems to me I've got to shift everything back into iTunes - Again.
    if this is the norm, I would like to see - for others because now I know! - a little warning
    "Hi, We're iTunes, and you need an update. So please update, just let it be known however, then when you do - we'll delete your catalog and any playlists. Thanks for using iTunes"
    something like that, because now I've gotta re-load everything back... bolics I say bolics.

  • Hp Pavilion dv7 Sound goes in and out and makes clicking noise

    Recently my laptop has been having wierd audio issues and I'm not sure the cause. The laptop will get about 10-15 minutes into a movie or any sound extensive activity and the sound starts cutting in and out and making a weird clicking noise every time it does. One think I found helped sometimes was to plug in headphones into the headphone jack, however the laptop would randomly switch between the headphones and the external speakers on the laptop even if left alone. Sometimes it will just play out of the external speakers perfectly fine if I had headphones plugged into the jack. I was thinking that it may be the sound card, but I honestly don't know. Could someone share some insight on my problem?

    Hi ,
    Welcome to the HP Forums! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. Thank you for posting. I have read your post, and I understand that you are experiencing issues with speakers and headphones. The sound switches between the devices. And if you do not use headphone, the speakers will not work in 10 -15 minutes, and it will not play the sound right. Please test your laptop along the steps on this document HP Notebook PCs - No Sound from Speakers (Windows 8) And let me know if it helps. Regards, 

  • E52 - Problem with sound clips

    Hello people,
      I'm with the latest E52 software. 
    1. With the old and the new one there is a problem. First when you record a sound clip,  It is not appearing in Menu-> Media->Gallery. The only way to access my sound clips is to open file manager and browse it from there and that is little bit complicated. 
    2. The second problem with the sound clips is that each new recorded clip is with name and number after that. I have deleted all sound clips but the program remembers the last number and continue from the last. Can I reset and start my clips from number 001 ?
    Thank you.

    Hi,
    Probably, one setting is wrong:
    Select the recorder
    Options
    Parameters
    Recording quality must be set to: Standard    (High will not work, neither MMS compatible)
    You should find your recordings in Gallery, Audio clips.
    OK ?
    E51 @ 400.34.011 RM-244 Maps V3.01 09wk44 Map version 0.123.112
    E52 @ 052-003 RM469 Maps V3.04 10wk32 Map version 0.1.25.114

  • Fading a mask in - and out?

    While there is possible to fade in and out in Compositing in Video Animations, there is no such functionallity in Color Correction.
    Is there a way I can fade in - and out - a color correction mask in the same clip? Workaround?
    Thanks!

    1) Cut the clip where you want the mask to fade in.
    2) Apply the mask to second half of the clip, past the cut point.
    3) Place a cross dissolve transition at the cut point.
    -Richard

  • Problem with Quicktime Pro in and out Markings

    Hi,
    I really need som help. I bought QT pro quite recently to be able to cut a movie. The problem is I can't get the markings (in and out). I have tried on two different computers and I have read the instructions. I have unmarked the box where it says "hide markings" and I have tried to press "i" and "o" when the movie is played but it doesn't help. When I first opened the program at computer no 2 there were markings (so at least I know how they look now) but they dissepeared when i opened an other file and now they are completely gone again. What is wrong? Could someone please help me? I need to make a film for my friend weddingday!!!
    /Charlotte

    Very strange, is this just with certain files i.e. the wedding material or all files?

  • Permissions problems with sound track pro and garage band

    I am having a problem with the loops and sounds in Garageband and SoundTrack Pro. When I attempt to use a sound in garage band,  I get an error "an eror occurred   result code = -5000   File = Garageband-Temp-54E281E". When I do a search there are about 58 separate folders with loops or effects in them. If I isolate the one I want to use and change the permissions of the folder to everyone read and write I can use the sound, but I don't want to manually change the permissions for 58 seperate folders. I ran repair permissions using disk utility but that did not fix it. Any suggestions, I have a lab of 22 imacs, if it was just one I would just fix the permissions on it but for 22 separate machines, I would like some automation. Thanks in advance for your help.

    I'll also add that I'm pretty sure I used this microphone along with the iMic USB a few years ago when I had my 'quicksilver' Mac G4 and it worked with that machine. As noted above, I've tried it with both a 2 channel and both the mono channel settings in Garage Band; but I am using a 1/4" to 1/8" jack adapter in order to plug into the iMic's 1/8" receptacle. The adapter is stereo to stereo, meaning it has both contacts for r & l. That shouldn't make a difference should it? In my experience if you are using mono equipment (like a single microphone) the sound will still be delivered through one of the two channels.

  • ITunes plays songs but the sound goes in and out on some...

    Hi there,
    I recently dumped my whole computer and reloaded all the programs. Upgraded from Windows Vista to Windows 7. I reinstalled iTunes and was surprised to see my music still there. Kind of weird but saved me the time to reinstall all my music. My iPod still connects and is recognized. Music plays fine on my iPod but when listening to music on iTunes while I work on my computer, many of my songs sound like parts of them are really low, or rather distant sounding, then a part sounds like it should, then it will fluctuate between the two. All this in one song.
    I've checked my drivers, have the latest iTunes version. No iTunes plug-ins in the App folder. I just don't get it. I'm about to reinstall all my music but that is last resort. I've sat here for a considerable amount of time searching the discussion forums for a solution but doesn't seem to be a topic with this particular problem.
    Any thoughts? Thanks for you help.

    Does this happen with other computers or devices?

Maybe you are looking for