Problems for view transactions va43 iw40 in Portal

Hello,
I need help solve problems in a portal;
The portal is with problems of view and with the scroll bar in transactions va43 iw40, The scrollbar does not appear when using the transactions.
What can this be?
Someone help me?
Thank you!

Hi,
Thanks Koti Reddy...
There is a default setting for SICF Webgui ?
Thanks
Edited by: Antonio Carlos Santos Junior on Jul 25, 2008 3:48 PM

Similar Messages

  • Performance problem for mass transactions after upgrade from 4.7 to ECC6.0

    Hi All,
    After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade the jobs for FPVA with the same variant takes around 9k-10k seconds. I am unable to figure out the cause for exponential increase in the duration of several mass-jobs (after the upgrade). Are there any SAP notes or do we need to do any customizing setting to solve this problem? Does anyone face this kind of problem?
    Thanks in advance
    Taj

    Hi,
    This is normal after upgrade to 6.0, I have faced the same in all upgrades I've done and some others that I have involved also. If you did not requests and going live upgrade check I strongly recomend to schedule an Early Watch Check to minimize the impact. Times won´t be the same but can be very close if the system is tuned well. We have tuned systems that now run with good performance after this services.

  • Problem for viewing Image and "\n" on Alert

    Good day.
    I made a Midlet MIDP 1.0 CLDC 1.0 that have an Image on Alert class;
    this is my code:
    Alert al = new Alert("AppTitle");
    try {
    al.setImage(Image.createImage("/MyApp/myimg.jpg"));
    } catch (java.io.IOException e) {
    al.setTimeout(3000);
    al.setType(AlertType.INFO);
    display.setCurrent(al);
    On Nokia Phones (I've tried Series 40 e 60) the result is that I view on text area Information and near of it (but cutted) the image.
    Why?
    I have another question:
    If I use on Alert class
    al.setString("MyApp\nMyName");
    within or eithout image On Nokia phones the "\n" idn't considered.
    Both problems in others phones (I've tried Motorola and Sony-Ericsson) aren't.
    Why?
    Best regards and good work.
    Stefano Errani

    Hi MTSTUNER & J Maloney
    I really appreciate the interest you've both taken in the question.
    Yes, J Maloney you would be correct. I was wanting to see the whole of the image, the masked bits and the not masked bits... as well as the mask too all simultaneously.
    I'm currently kicking myself that I've not explored the Masks panel. Don't know when it was introduced, I have kind of skipped a version of PhotoShop or two on my own machine - lame excuse, I know gov. The density idea is far more elegant than my solution. However, I did find that by creating the duplicate I've been able to colourise it so as to make the results of what I was doing really obvious visually. I like the invert idea too, so simple - and it might prove the best of the options... but I'll try it on another image as I've pretty much done this one - lots of hats, not much hair.
    No offence on the "last paragraph". My reaction was "it's not unasked" though I wasn't clear: "How do sensible people approach this exercise?"
    Thank you too MSTUNER, I appreciate the time spent.
    "Quick Mask?" occurred randomly to me. Something I've never bothered with, tending to go straight to Layer Mask work. I'll own up that Quick Mask has never managed to make itself part of my workflow, I've no idea why because I'm sure it should if I gave it time. However, a quick experiment hasn't produced a Eureka moment. I was hoping I could easily subtract or add a Quick Mask from/to an existing Layer Mask... nope, doesn't seem to want to - though it was a 'quick' experiment.
    Thank you again for taking the time and enjoy the rest of your day. Regards.

  • Maint. Status problem for View in ABAP Dictionary

    Hello, guys. I have a problem with a configuration in my Maintainence View in the ABAP Dictionary.
    I have a maintainence view in my abap dictionary, When i go to the tab "Maint. Status" there, and want to change the "Data Browser/Table View Maint." from "Display/Maintenance Allowed with Restrictions" to "Display/Maintenance Allowed", an error is occured. An error message is displayed, showed "The input field contains prohibited characters (already deleted)."
    So, what should I do in order to change to "display/maintenance allowed with restrictions" status.
    Hope anyone here can provide me a solution. Thanks in advance first. ^^

    Check below SAP help
    http://help.sap.com/saphelp_nw04/helpdata/en/38/81c1351181b73fe10000009b38f839/frameset.htm
    events
    http://help.sap.com/saphelp_nw04/helpdata/en/91/ca9f0ea9d111d1a5690000e82deaaa/frameset.htm
    Regards,
    Atish

  • Problem in viewing Accounts iview through portal.

    I am facing problem when i am trying to view the Accounts iView through
    portal. The same iView is running well directly through CRM system.
    In portal a small window is poped  asking for username and password for
    Site      : crmprd.ssg.local and
    Realm  : SAP Web Application Server [CP1]
    I tried by providing the user name and password of CRM but it's not
    working. When I cancel that popped window then that Accounts iView is
    displayed but all the tabs and links in that page are inactive.
    And also when i am clicking on the any of the tab then at lower left corner of
    the browser "access is denied"  message is coming.
    I will be thankfull for the reply.

    The BSP is just a URL as far as the portal is concerned. Just make sure the same URL is being generated as if you called the BSP directly.
    Cheers

  • Scheduled Discoverer report link for viewer in portal

    Hi,
    When a link for scheduled report for plus users is created in portal Oracle suggestes the following. This is good since it does not need the run number and the same link will work for all reruns.
    http://<host.domain>:<port>/discoverer/plus?cn=cf_a156&opendbid=SALES_ANALYSIS2&sheetid=42&workbooksource=Scheduled
    whereas for opening a scheduled workbook result in viewer the link needs the run number which prevents using the same link for every run.
    Do anyone found a way to workaround this
    Thanks for the help
    Jay

    Hi Jay
    I can see that you've had this posted for a little while so I thought I would at least let you know that I've read it. I'm afraid the answer is not what you hoped though as I don't know of a way off the top of my head to do what you ask.
    Sorry, regards
    Michael

  • View for PAYROLL transactions

    I am working on a drilldown Report where by I need to generate ALL detailed transaction for a particular period.
    I found some views useful for some modules like XLA_AR_INV_AEL_GL_V,XLA_AR_INV_AEL_GL_V a,XLA_AR_REC_AEL_SL_V etc .
    I am not able to locate the view for PAYROLL transactions.
    I actually need a view that holds ALL the transactions posted for PayRoll in details Such as : Desc-"Salary for John for Jan" Dr"40,000". I would have taken my information from the journals(Gl_je_headers and Gl_je_lines) but that, is not detail enough.
    I notice for other modules Similar view start with "XLA_" exist.
    It is very Urgent.
    Thank You.

    I am working on a drilldown Report where by I need to generate ALL detailed transaction for a particular period.
    I found some views useful for some modules like XLA_AR_INV_AEL_GL_V,XLA_AR_INV_AEL_GL_V a,XLA_AR_REC_AEL_SL_V etc .
    I am not able to locate the view for PAYROLL transactions.
    I actually need a view that holds ALL the transactions posted for PayRoll in details Such as : Desc-"Salary for John for Jan" Dr"40,000". I would have taken my information from the journals(Gl_je_headers and Gl_je_lines) but that, is not detail enough.
    I notice for other modules Similar view start with "XLA_" exist.
    It is very Urgent.
    Thank You.

  • Change transaction using BDC-problem for large number of lines on screen

    Hi All,
    I am developing BAPI (using BDC) which creates quality notification in SAP which is entered via front end web application. Structure p_qmsm contain 3 lines of task in notification. The code is as given below. To avoid problem of large no of lines on screen,code lines starting with * is used. This actually for pagedown after entering every 2 lines and creates new line. so that 2 lines always push up on screen and there will not be problem for creating large no of lines on screen
    perform bdc_dynpro using 'SAPLIQS0' '7200'.
    perform bdc_field using 'BDC_OKCODE' '=10\TAB11'.
    LOOP AT p_qmsm INTO wa_qmsm.
    *IF wa_qmsm_cntr > 2.
           wa_qmsm_cntr = 2.
           perform bdc_dynpro  using 'SAPLIQS0'                   '7204'.
           perform bdc_field   using 'BDC_OKCODE'                 '=PEND'.
    ENDIF.
    perform bdc_dynpro using 'SAPLIQS0' '7204'.
    perform bdc_field using 'BDC_OKCODE' '/00'.
    CONCATENATE 'VIQMSM-QSMNUM(' wa_qmsm_cntr ')' INTO wm_qmsm_qsmnum.
    CONCATENATE 'VIQMSM-MNGRP(' wa_qmsm_cntr ')' INTO wm_qmsm_mngrp.
    CONCATENATE 'VIQMSM-MNCOD(' wa_qmsm_cntr ')' INTO wm_qmsm_mncod.
    CONCATENATE 'VIQMSM-MATXT(' wa_qmsm_cntr ')' INTO wm_qmsm_matxt.
    perform bdc_field using wm_qmsm_qsmnum wa_qmsm-qsmnum.
    perform bdc_field using wm_qmsm_mngrp wa_qmsm-mngrp.
    perform bdc_field using wm_qmsm_mncod wa_qmsm-mncod.
    perform bdc_field using wm_qmsm_matxt wa_qmsm-matxt.
    wa_qmsm_cntr = wa_qmsm_cntr + 01.
    ENDLOOP.
    CALL TRANSACTION 'IQS2' USING wt_bdc
    MODE 'N' UPDATE 'A'  MESSAGES INTO P_MESSTAB.
    The same code is used in modify mode also. web application is sending all 3 lines in modify mode even if single line is modified. It is already decided to send all rows back from web application to SAP in same sequence. It is working fine if i comment 5 lines which is starting with *. But in modify mode, how can i ensure that correct row is modified? and how can i achieve problem of large no of lines on screen?Please suggest?

    Hi yogesh,
    how can i ensure that correct row is modified?
    1. For this we need to know two things ;
       a) the database table in which the entries are already stored
       b) the sequence in which they are displayed in the transaction.
    2. So before changing any line, we need to compare (the primary key values / important values)
       a) as per the database table and as per the incoming data from web application (using bapi)
      b) if the match is ok, it means that particular row was not modified, else modified.
    how can i achieve problem of large no of lines on screen?
    1. For this I am  not sure about the transaction and its screen. Manytimes for appending row on the screen,
      there is a PLUS + button on the grid toolbar. So for every entry, (inspite of some empty/filled rows already visible on the screen), we should use the + button, and this new row always appears on the top i.e. row number 1.
    hope this helps.
    regards,
    amit m.

  • I want to use my Mac desktop as a portal for viewing my cable television via some kind of cord. Is this possible and what do I need to set this up?

    I want to use my Mac desktop as a portal for viewing my cable television via some kind of cord. Is this possible and what do I need to set this up?

    It can be done with analog but not digital thanks to "good 'ol" HDCP copy protection which apple (and most other manufacturers) unfortunately respect.
    So you can take the analog output from your cable box (component -- 5 cables -- if it has it but generally they all have composite -- 3 cables) and feed it into some kind of converter or into some appropriate pci card for your mac pro.  But none of them are going to let you directly use the HDMI output from the box to your computer.
    Bottom line, no single cord is going to work and it will never be the higher quality digital picture you get on your tv.
    Some qualification:  There are boxes that I think support hdmi input.  Look at Blackmagic.  But I still don't think you can get around the HDCP from the cable box (might depend on the kind of cable box). 

  • RoboHelp for HTML 9 - Problem with viewing .chm file on 64bit machine

    I am working with RoboHelp for HTML 9 on a 32 bit machine. Recently, we encountered problems when viewing a .chm file on a 64 bit machine. The TOC was fine, but the topics did not appear, only error message "Navigation of this web page cancelled". My compilation settings did not change since the last compilation some months ago. What happens?

    Generally, I've only ever seen the need to ensure the CHM is unblocked if it has been downloaded from the web. I could see where it could possibly occur if one moved the CHM from a network drive to a local drive, but I'm skeptical that would be required in that case.
    Cheers... Rick

  • Accounting entry view needs to be restrcited for STO transactions

    Hi
    There is Stock Transfer scenario at my place. Stock transfer (from one plant to another) is done after adding some profit margin to the cost of material. Note: My different plant represents different profit centers
    Ex: STO is done from plant 1000 to plant 2000. Cost of material is Rs.100 and profit is Rs.20. Hence STO is done at Rs. 120
    Entry posted:
    Stock Plant 2000 (Profit center 2000) - Rs. 120
       To Stock Plant 1000 (Profit center 1000) - Rs 100
       To Profit Margin (Profit center 1000) - Rs. 20
    Now i want that this account entry should not be view by plant 2000 (whose profit center is 2000). Reason is that the management don't want that receiving plant should know about the profit.
    So let me know if i can block the view of accounting entry for plant 2000 for STO transaction only. Plant 2000 should be able view rest all accounting transactions like Purchase from third party, sales, etc.
    Note: For STO transactions, we have created separate PO (Document type) as ZSTO.
    Please help
    Edited by: Deepak Agrawal on Sep 8, 2011 5:58 PM

    Hi,
    You can simply take authorization of GL involving in plant desired. Please ask your BAsis guy to revoke activity 03 against object F_BKPF_BES for authr group of GLs from desired users. It will meet your requirment.
    Regards

  • Appintegrator or URL iView for SAP Transaction launching Problem

    I am using the following methods
    1). created portal sap transaction iview  ,for different transactions, I am not able to pass a parameter with #
    a) passed application parameter =1234#56
    b) paassed as 1234%2356
    in both the cases the value is not passed.
    2)Created an iview using appintegrator and even this not passed the above value with #..
    3) I used: webgui URL:
    /sap/bc/gui/sap/its/webgui?sap-client=<client>&transaction=ME53&EBAN-BANFN=0001277601&okcode=AB
    even this is not accepting # in the value for EBAN-BANFN parameter.
    could any one help me.

    Hello Kiran,
    Special characters, like "#", should be encoded when in the URL.  For # it is %23.  This is why the value 1234#56 becomes 1234%2356.  If it is not working then it because the receiving program is not decoding the value back to 1234#56.  You can find more information on this by searching SAP notes for "URL encode". 
    As for this issue, what is the error when the value is 1234%2356?  Thanks.
    Edgar

  • SAP Portal for PSCD transactions ...

    Hi, I want know if Can I implement SAP Portal for PSCD transactions? ........ I would like run some PSCD transactions from web browser and offer an Internet portal for many tax payers.
    regards.

    Well Jose,
    There are different ways to access PSCD data and show it in Portal... for instance... you can give access to the Tx FPL9 through the Taxpayer Online Services (TPOS) portal. Ask your BASIS and EP guys to activate TPOS and create users for the taxpayers... remember that you'll need to buy extra licences for all the taxpayers you're willing to offer this service.
    Regards,
    JC

  • Transaction code for viewing invoice document and Claims document

    Hi Experts,
    Can u please tell me the transaction codes for viewing invoice document and claims document in ECC.
    I am in CRM and i do not know about the ECC transaction codes.
    request you 2 help.
    Thanks and Regards
    Shilpi

    hi,
    MM flow:
    purchase Requestion (ME51)
    Request for Quatation (ME41)
    Quatation from different vendors (ME47)
    price comparision (ME49)
    purchase order send to vendors (ME22)
    goods reciepts (MIGO)
    logistic invoice verification (MIRO)
    SD flow:
    Enquirey (VA11)
    Quatation (VA21)
    sales order processing (VA01)
    delivery (VL01)
    billing (VF01)
    Also follow this link.
    The specified item was not found.
    i hope this will help you out
    -Thanks & regards
    Saurabh Goel

  • When I try to download a movie it says it will be ready for viewing in 10 hours. I am connected to wireless internet. What is the problem?

    When I try to download a movie it says it will be ready for viewing in 10 hours. I am connected to wireless internet. What is the problem?

    How fast is your internet connection and do you know what wireless standard your router is? Because download time will depend on several factors. The 1st one being the speed of your connection,2) the size of the file being downloaded,& 3) how fast your router send and receieve the data.

Maybe you are looking for