Problems getting a connection with WRT54G Ver. 8

Okay.. This may be a little long.
I had my router set up for about 2 years now. It worked fine up until 2 days ago. I have a WRT54G V8 router, with a Belkin wireless receiver for another desktop computer. I have tried using the 192.168.1.1 website to set up on my wireless computer to try and set up the IP address, but it does not seem to be working at all. The IP remains to be 0.0.0.0 and would not change after changing the MAC address, and using Release/Renew option. The desktop computer that the router is hooked up to doesn't even recognize 192.168.1.1 website into the browser. I have tried reconnecting the router, as well as the Broadband modem that we have and nothing seems to get the connection to my other desktop. Can anyone help me get my connection running again? It would be greatly appreciate.

Your Modem should be connected to the Linksys Router on the Internet Port and then you need to connect your Computer to the Linksys Router on the LAN Port 1.... Then Connect the Power to the Router.... Check the Light Status (Power, WLAN, Port no.1 and Internet) all this lights should be Lid...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Similar Messages

I am unable to get a connection with my ipad through my router but I am able to get in when at my friend's house

I am unable to get a connection with my ipad with my wifi router. Will I need to upgrade my router

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

TS1398 I have an original iPad 32 why can't I connect on my home wi-fi but can connect anywhere else. No problems at home connect with other iPads and MACs.

I have an original iPad 32 why can't I connect on my home wi-fi but can connect anywhere else? No problems at home connect with other iPads and MACs.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problem in establishing connection with mysql 5.0

Hi,
I am using JCAPS 5.1. I tried to insert data to mysql database table.
But i got following error
java.sql.SQLException: Error in allocating a connection. Cause:
Physical Connection doesn't exist.
My intention is to read file in which data are comma seperated and to
populate those values to a mysql 5.0 database table.
Sample DATA in file [test.txt]
111,gg,23,MFG
112,hh,24,MFG
113,ii,25,RETAIL
114,jj,26,IT
Database table: employee
eno,ename,eage,edept
While creating JDBC OTD there is no problem in establishing connection with database. But after deploying i got above error.
I have used Mysql 5.0 Connector/J JDBC driver. Added JDBC driver jar files to following directories as required.
1) C:\JavaCAPS51\logicalhost\is\lib
2)C:\JavaCAPS51\logicalhost\is\domains\test\lib
Steps i have followed as per JDBC-ODBC -eway user guide doc.
1) Created USerDefined OTD and added necessary fields
2) Created JDBC OTD.
3) Created JAVA collaboration and do business process for inserting
4) Mapped all components by creating in Connectivity MAp
5) created necessary external systems in envrionment explorer.[JDBC External System and File External System]
6)Created Deployment profile
5) Deployed it.
After deploying it gives error as
java.sql.SQLException: Error in allocating a connection. Cause: Physical Connection doesn't exist
Please let me know the solution for problem.
Message was edited by:
VenkateshSampoornam

In the environment definition,
-> External Application JDBC
-> Properties
-> Outbound JDBC Connection
You have the database URL in the "DriverProperties" field
Valid URL would be : jdbc:mysql://localhost:3306/caps
!! The doc says that this field is optional !! Seems to be an error in the doc:
Hope this helps
Seb

My i-pod Nano (4th/5th gen) is fully charged but I get no connection with i-tunes as I used to. Help?

My HP laptop recently 'crashed' and had to be reset to factory settings. I've tried to re-download i-tunes but nothing seems to be happening. My i-pod Nano (4th/5th gen) is fully charged but I get no connection with i-tunes as I used to. Help?

Hi, Primmy1.
Thank you for the question. Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

11.0.10 Update Issue - Problem saving documents - getting message "This document could not be saved. There was a problem reading this document (21)." The PDF documents are being created by Esker VSIFax and the problem is only occuring with updated vers

Our IBM Unix system uses a program called VSIFax (Esker) to create PDF documents such as invoices. Users that have updated to Acrobat version 11.0.10 can open the PDF but then when trying to save the document the get a message "This document could not be saved. There was a problem reading this document (21)." The problem is only occuring with updated version 11.0.10 (11.0.9 works fine).

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

Wireless Problems with WRT54GS Ver.4

I have 3 computers in the house on a wireless connection and one wired. Just recently all 3 wireless connections are not working properly. The computer i use has not seen any problems it's connected directly to the router through a network cable. Without changing any of the settings on either the computers or the router they will not connect to the internet. They are all 3 connected tot he network but I am unable to connect to the internet on them, or create an internet connection.

it internet add is not all 0's. The problem isn't with the wired connection. it's with all the wireless connections. I configured the connections to begin with and never had any problems outside of low signal strengh with any of the 3 connections. but just recently i can not connect to the internet on any wireless connection. None of the settings on the router or computers have changed since this problem has occured. I'm using the latest firmware. I've reset the router and still no change in the situation. all 3 computers using wireless connect to the network fine but when i try to setup an internet connection it doesn't add it into the "network connections" folder. I'll click "setup" under "connections" inside internet settings in IE, and click "connect to the internet" , "set up connection manually", "connect to a broadband connections that is always on" and "finish" uasually this is where the internet connection pops up in the "network connections" folder but nothing happens...?

Dropping Connection with WRT54GS v4

I have had a problem for the last week where my router drops connection intermittently about every 20-30 minutes. Once it drops, I have to unplug the router and modem and start over. It happens over and over again. Hooking up directly to the modem results in a normal, trouble-free connection. I have tried changing the channel, the SSID name and restarting everything sequentially without success. Any ideas on how to fix this would be greatly appreciated.

i started getting this problem, or at least a similar one, lately. i have a WRT54GS v6 with the latest firmware (1.50.9) that randomly decides to stop allowing wireless connections. devices that are already connected will stay connected and be able to access the internet through it, but if you restart a computer or try to connect with other devices, it doesn't find the router.
i have changed the SSID and set it so it does not broadcast the SSID, but that shouldn't cause it to stop accepting connections. i usually only have my laptop and a couple wii's connected to the router (my own and 2 of my roommates).
the only way to fix it when this happens is to unplug the router and plug it back in.

Getting Pooled Connection with username and password

hi,
I am facing problems in getting pooled connections to MYSQL
database.I am using Tomcat server.
I tried the example given in Tomcat doc "JNDI how to", it
works fine with one set of username and password which is
given in server.xml. Now can anybody guide me thru the steps
to get pooled connections to the same database with multiple
username and passwords.
Thankyou all in advance

Now can anybody guide me thru the steps to get pooled
connections to the same database with multiple
username and passwords.Nope. Can't be done -- at least not that I've seen yet.
Database/JDBC driver vendors seem unconcerned, or don't
care about this scenario. I ragged on Informix years
ago for this very feature. It should would make database
admins jobs a lot easier if they could know "who" that
connection belonged to that is running the outrageous
SQL query without having to divine it by way of tracing
socket/IP connections back thru the network to some machine.
The only way I've seen to do it is to create your own
connection pool code that handles user/password connections.
-- but then the problem becomes you have a collection of
mini-pools for each user. i.e. if you have 200 users, you
end up with 200 connection pools with a couple/few connections
in each sub-pool. Kinda defeats the purpse.
So, apparently, everybody just deals with the single
"generic" user/password connection pool.

Can't get internet access with WRT54G router

I recently purchased a used WRT54G. I replaced my old wired linksys router with it and my hosts are able to get dhcp addresses from the router, but they cannot access the Internet. I have tried to use dchp release and renew buttons under the status tab in the router's web-based gui to get a public IP address, but can't get one. I have attempted to reset the router to its factory settings, but I still can't get the public IP. I have no problem getting an IP and Internet access with my old router and the WRT54G works if I disable its dchp and daisy chain it to the old one. Maybe I need to do something else for a complete reset of the router. Any suggestions? Thanks, Jack

the router that you just purchased was maybe configured for a different network before that's why it did not work initially. after making the router back to its' factory defaults, you should reconfigure or set-up the router.. If you have CABLE ISP, enable ''mac address clone'' on the router's set-up page under the set-up tab. then check if you can get a public ip address after that.

File and print sharing with wrt54g, ver. 6

computers connected to my wrt54g, ver. 6, router (firmware ver 1.01.1) cannot see each other's shared files although they can all share the same internet connection just fine. file and print sharing has been set up on each (they were connected to a wired router before i purchased the wrt54g and they saw each other and shared files, no problem). how can i share files through this router? what went wrong?

Are you running software firewalls on any computer? Has the LAN IP network changed (e.g. it was 192.168.0.* before and now 192.168.1.*)?

DNS lost connection with WRT54G

I have the following problem with my WRT54G v.8 router. Sometimes when I turn on on the computer I can not access the internet. I am using a wireless connection using Vista. Running the diagnose and repair option in Vista it says there is not connection with DNS. I make a ping to the router and it is ok, ping to the cable modem and it is ok, and obviously ping to DNS and they don´t answer. After powering off and powering on the router I have again the internet connection. After some days or sessions the problem repeats. Maybe somebody have a solution for this kind of problem.

hi... try upgrading/reflashing firmware on the router, go to www.linksys.com/download and download the latest firmware for the router, after reflashing firmware on the router, reset the router back to factory default settings and logon to router's setup page, reconfigure it according to ISP settings, reduce MTU to 1458, go to wireless settings try changing wireless channel to 11, go to advanced wireless settings and reduce beacon interval to 50, fragmentation and RTS threshold to 2304...check whether it works or not...

Problem setting up connection with 2wire USB adapter (BT Home Network 1200)

I keep on running into a brick wall setting up my internet connection on my newly purchased MacBook (I have never used a mac before, having used a PC for years). I am trying to set up my macbook as an additional computer on my BT Home Network 1200, and I have installed the drivers given on the 2wire CD, but even when I plug in the USB adapter, the Macbook does not seem to recognise it. The adapter looks something like this:
Anyway, the instructions given in the BT Home Network PDF manual seem to suggest that it is relatively straightforward, and that it is simply a matter of clicking the apple menu, selecting "control panels", selecting "TCP/IP", and then in the "connect via" box, clicking on the pulldown menu and selecting 2Wire PC Port. However, I am using 10.4.9 and it seems to me that this guide must have been written for an outdated version of Mac OS X because none of these instructions seem to make sense or work in the context of my macbook. At the moment, it seems like I won't be able to get my macbook online. Could someone please help explain to me how to get around this?

Any reference to 'Control Panels' will, indeed, be for Mac OS 9.x, the last version of which (9.2) was released in 2001.
My advice would be to return it to BT and ask them for an ethernet-based modem, not a USB one.
USB DSL modems have varying levels of support in Mac OS X ranging from poor to none. The fact that 2Wire doesn't include Mac OS X instructions implies that this model is at the lower end of that scale.
By comparison, an ethernet-based modem will connect to your Mac via ethernet, have the option of sharing the connection with multiple machines, typically be faster, and has an almost 100% compatibility rate.

HH1.5 - can I get faster connection with it?

Hello everyone
I have a Home Hub 1.5, and although the conection is stable I would like to get faster download/upload speeds if possible.
From speedtest.btwholesale.com just now I get the following
Download Speed (Mbps): 2.21
Upload Speed (Mbps): 0.33
Ping Latency (ms): 41.25
As a test I went to my sisters flat earlier today (she lives in the same block as me), and ran the same test using her Sky broadband connection on my laptop, got these results
Download Speed (Mbps): 6.27
Upload Speed (Mbps): 0.82
Ping Latency (ms): 38.75
So her download/upload speeds appear to be between 2 and 3 times faster than mine.
I would welcome any advice on how I can get performance close to what my sister can get on my HH1.5 (if possible), below are the stats from the hub and details of our exchange too - we are less than 1km away. I have spent a bit of time today trying different channels on the hub without success.
Any questions, please let me know. Welcome any advice you can provide.
Many Thanks, John
BT Wholesale information
ADSL status:ADSL Max statusDSL status:21CN WBC status:FTTC status:
Enabled as of 31/03/2000
Enabled as of 31/03/2006
Enabled as of 03/07/2005
Enabled
Available in some areas
Uptime:
0 days, 6:02:27
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
555 / 3,203
Data Transferred (Sent/Received) [MB/GB]:
172.06 / 3.58
Output Power (Up/Down) [dBm]:
9.5 / 0.0
Line Attenuation (Up/Down) [dB]:
10.0 / 20.0
SN Margin (Up/Down) [dB]:
14.0 / 28.5
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
1 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
1 / 0
FEC Errors (Up/Down):
0 / 0
CRC Errors (Up/Down):
0 / 0
HEC Errors (Up/Down):
0 / 0
Line Profile:
Fast

Hello imjolly / reed_richards / everyone
As per the "first steps" page
I have an older master socket. There was some sort of phone "splitter" between this socket and the microfilter, I have removed this and restarted the hub. ADSL statistics 14 mins later are below
DSL Connection
Link Information
Uptime:
0 days, 0:14:30
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
691 / 3,435
Data Transferred (Sent/Received) [MB/MB]:
1.10 / 8.80
Output Power (Up/Down) [dBm]:
9.5 / 0.0
Line Attenuation (Up/Down) [dB]:
9.5 / 19.5
SN Margin (Up/Down) [dB]:
10.0 / 27.0
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
0 / 0
FEC Errors (Up/Down):
0 / 0
CRC Errors (Up/Down):
0 / 0
HEC Errors (Up/Down):
0 / 0
Line Profile:
Fast
I then ran speedtest and got the following results
I have also done the quiet line test, I did not hear any noise on the line.
A couple of further things to add
- previous connection time showing only as 6 hours was due to problems getting to homehub home page (i.e manual reset). Prior to that it had been running for months without re-start, and performance was same as now.
- The master is not the only phone socket, but the microfilter is plugged directly into the master socket now.
I do not really understand why the speedtest results are showing max possible speed of 4Mbps when I can go down the hall to my sisters place and get 6.27Mbps. It is a very large building so I imagine there could be multiple lines in and I happen to be on a slow one?
Welcome any answers, guidance that can be provided.
Thanks

Windows XP system not getting good connection with Airport Extreme

I just moved into a house that already has a Mac system with an apple wireless network. I have a Dell 3.2 GHz system and I just bought a D-Link wireless card 108G with Mimo technology which is supposed to increase the range of the card. The airport extreme router is in the very next room no more than 15 feet away from my PC and I am getting "very poor connection" according to XP. Is there a compatability issue with XP and the Airport router. I have tried everything including getting the latest drivers from the D-link website and I am still getting extremely bad connectivity. I didnt think wireless networking would be this problematic. Let me know if any of you have had issues with this.

I just moved into a house that already has a Mac
system with an apple wireless network. I have a Dell
3.2 GHz system and I just bought a D-Link wireless
card 108G with Mimo technology which is supposed to
increase the range of the card.
This will only be true when using the D-Link Router which uses 108G Mimo technology, otherwise it will only work at 802.11g speeds.
The airport extreme
router is in the very next room no more than 15 feet
away from my PC and I am getting "very poor
connection" according to XP.
What happens if you move either the Airport base station or the XP PC closer?
Is there a
compatability issue with XP and the Airport router.
No
The Airport router is a wifi certified 802.11g wireless router and any wifi certified 802.11b or 802.11g client will be able to connect regardless of who it is made by.
It should be noted that the D-Link device is not wifi certified!
I have tried everything including getting the latest
drivers from the D-link website and I am still
getting extremely bad connectivity.
Can you get any connectivity, any network connection?
iFelix

Problems getting a connection with WRT54G Ver. 8

Similar Messages

Maybe you are looking for