Problems getting Sawtooth to boot

First off, I am a newbie when it comes to setting up an OS X installation. I've been working in OS 10.3 for a while, currently OS 10.3.9, and have familiarity with the environment. What I'm not familiar with is getting started, as that's why I'm asking for guidance here.
We bought a used G4 Sawtooth, which just arrived today. I hooked it up and everything looked fine. On booting up, got the chimes and then a welcome to the Mac video and the create an ID part. Walked through this part until I got to the create a .mac account. I don't want to create one, so I left everything blank and tried to go to the next page. Instead it started going through the boot-up. Software Update came up and then crashed. Right now, the system keeps going through a partial bootup (blue aqua background), then the menu bar blinks out, comes back and the cursor keeps going back and forth between normal and an endless spinning beachball. I think it's stuck somewhere in the boot-up cycle. I tried doing a safe boot, but got the same results.
I've never gone through the create an account part before -- other people have done it for our previous and current machines. I think I may have done something wrong. Or maybe something's loose from shipping. Do I need to reinstall and start over? I'd sure appreciate some pointers on how to get this G4 up and running properly.

EmDeeH, welcome to Apple Discussions.
What CD/DVD with the OS X install software are you using? Is it a universal/reatil version? If it is one that came with another Mac, it won't work.
If the Mac's HD was wiped clean when you got it, use the Disk Utility to wipe it clean again & try a reinstall.
Another possibility. The Mac may not have been plugged in to AC power for a while & the internal memory battery is weak/discharged & may need to be replaced. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
Cheers, Tom
Cheers, Tom

Similar Messages

  • 10.4.6 installed - no problems and no double boot either

    I've gotten into the habit of running all major updates from a fresh OS backup on an external FW drive using the combo updates. This allows me to install the update to either drive, in this case the Boot Drive. In the case of this update, I didn't have ANY of the problems or concerns mentioned elsewhere, no dual boot, no extra wait time on boot, no failures, nada.
    So, if you haven't purchased an external drive for backup and such here is another great reason to.

    It's been reported that you will not get the dual boot when using the 10.4.6 Combo. I just ran the update using Software Update and got the dual boot, no problem however, worked great.
    Steve M.

  • Cannot get rEFInd to boot new Linux install

    I am trying to setup a fresh install of Arch on a new SSD on my 2007 MacBook 2.1. This particular MacBook has a 32 bit EFI system, but everything else is 64 bit. The wiki article has some information for installing on this particular MacBook, but the instructions aren't super thorough.
    This MacBook is already running Arch on an old HDD and is booting with grub. I remember that setting this up originally was a huge pain and I ended up installing arch onto the drive through another laptop (a Dell) with similar architecture and transferring the drive over once done. Unfortunately, I no longer have access to this other machine.
    In order to get started with installing to the new drive, I decided to use the arch-install-scripts from within my working installation to install Arch to the SSD connected through a SATA-USB adapter. The installation of Arch went fine and I can chroot to it no problem.
    Installing the bootloader has been the hard part. I have managed to get the computer to load rEFInd off the SSD if I set it up just right (installed as EFI/BOOT/bootia32.efi), and rEFInd can even detect and boot my old grub install from the HDD (as long as the HDD is internal and the SSD is attached over USB). Unfortunately, I cannot for the life of me get rEFInd to boot into the new Arch install on the SSD. I have tried placing the vmlinuz and init images in various locations to help with auto detection, and I have tried various combinations of manual configuration in refind.conf, but nothing seems to get me anywhere. The manual configurations just get me "Error: Not Found While Loading vmllinuz-linux" and the auto configuration only ever finds my old install.
    I'm happy to post any configuration files here that are useful, but I'm not sure what people would want to see.
    The SSD is setup as gpt with a fat32 ESP set to mount to /boot/efi, an ext4 partition set to mount to /, and a swap partition at the end.

    So, refind basically works/is started by the mb's firmware?
    Please post your refind.conf (without all the comments, no manual stanzas!)
    Also, to simplify things, I'm now assuming the ssd is the only internal drive installed, your old install/hdd is disconneted.
    Use the arch-install cd , refind should detect it and allow you to boot, once the installer-system is up and running, please provide ouptut from lsblk.
    Also, mount both partitons , and show what files are where  ls -l YOURROOTPART/boot  and ls -l YOURESPPART/ just to get a better overview.

  • Problem getting audio on a W540

    Hi all I have been having some problems getting audio to work on my brand new W540. I have tried everything in terms of driver-updates, bios-updates, software-updates, registry cleaning (cc cleaner), removal and re-installation of drivers, etc. etc. but I am stuck with a little red cross on my speaker icon and the message "No audio output device is installed". I know this to be wrong though because at times I will have sound for a couple of days and then the little red cross pops back on. So I know that the sound works. It seems to be more of a software issue.  Currently I am getting a warning that the "DDP UMDF Driver" is deactivated. A bit of googling around tells me that this means the driver (which happens to be an audio driver) is malfunctioning and should be re-installed, but all help as to how that can be done seizes to exist online past this point.  Can anyone help me with this problem? I'd hate to have to send the laptop back in for maintenance because I am very dependent on it and because it works well in all other respects.  Cheers Jakob

    Having retried reinstalling with the recovery discs I was reminded what my problem was. I can't seem to get the system to boot up from the discs. Following the instructions from this link:
    http://support.lenovo.com/us/en/documents/ht075445#win8_1 I go into the boot sequence and change it so that the external DVD drive (and anything that remotely sounds like it could be an external DVD drive) is on top (See below), but when I save and restart the computer simply restarts into windows instead of starting the recovery process with the discs. What am I doing wrong?

  • Can't get G5 to boot directly into Linux

    Hi, I have an Xserve G5, and am trying to install Debian on it.  The problem is, I can boot the system my entering Open Firmware and typing "boot hd:,yaboot", but I'd rather not do that.  How do I get the system to boot directly, without having to enter Open Firmware?

    Use Option, not Command. Once it is booted, select you startup drive in "Startup Disk" system preference.

  • Can't get ibook to boot from external harddrive when hitting option key

    Hello,
    After owning a Pismo Powerbook that had it's hardrive replaced --twice--, i'm all about backing my shtuff up for my ibook.
    I picked up a Lacie d2 external harddrive today, and used Disk Utility's Restore function to copy everything from the ibook to the drive. I can boot off the Lacie without a problem when I select it as the startup disk from sys preferences.
    But I can't get it to boot from the Lacie when I depress the Option key while rebooting or starting.
    any suggestions?
    ibook g4 933   Mac OS X (10.4.6)  

    Let's be sure  you are doing it correctly:
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears.  Select the desired boot drive (you will have to wait about 20 seconds before you can make the selection) then click on the large right arrow button.  If this is what you are doing and it does not work, then you may need to re-prep the external drive and re-clone.
    1.  Boot from your Tiger DVD. After the installer loads select your language and click on the Continue button, then select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    After the above re-clone as follows:
    1. Open Disk Utility from the Utilities folder. 
    2. Select the startup volume from the left side list. 
    3. Click on the Restore tab in the DU main window. 
    4. Drag the startup volume to the Source entry field. 
    5. Select the backup volume from the leftside list and drag it to the Destination entry field.
    6. Check the box to Erase Destination.  Skip this step if you've already formatted the drive.
    7. Double-check you got it right, then click on the Restore button. 

  • Problems getting into SETUP

    I am having a problem when I first boot up that I cannot get into the Setup.  The startup screen comes up, but I cannot go into SETUP by pressing the DEL key.  I have read all the trouble shooiting guides I can on here and even seen a couple threads here from others that have had the same problem.  But it seems no one came back to say how they fixed the problem.
    Below I have listed what I have in the PC.  For what I have done so far is that when I get to the screen you see listed below.  I press the DELETE key a few times with nothing happening.  The PC will finally start beeping with each key press.  Since it never tries to go on and boot the OS from the drives I suspect it is hung up trying to do something.
    I'm using a P/S2 keyboard.  In fact I have used two of them in trying to get this to work, one is new. I have made sure I am using the purple keyboard port to plug them into.  I have tried resetting the CMOS.  I have tried setting J10 to put it into Safe Mode. Still nothing works.  I have disconnected the FDD, I have changed HDD too with no luck.  I have checked that everything is in the right place.  The HDD goes to J1 and set to the Master plug.  The CD-ROM goes to J2 with the plug correct there too.  Memory, described below, is in DIMM1 and DIMM3.
    What can I do to fix this problem?
    Motherboard  :  MSI K7N2 Delta-L
    CPU           :  AMD Athlon XP 2800+
    Memory       :  2x256Mb PC2700 from OCZ
    Video Card   :  ATI Radeon 9600XT
    Hard Drive   :  Quantum Fireball 40Gb
    Power supply :  450W by LinkWorld
    +3.3V   24A
    +5V   40A
    -5V   1A
    +12V   19A
    -12V   1A
    +5VSB   2A
    start up screen
    Main Processor  : AMD Athlon(tm) XP 2800+
    Memory Testing  : 524288K OK
    Memory Mode : Dual Channel
    DRAM Clock for DDR 333
    Detecting IDE drives ...
    Press DEL to enter SETUP, to Enter Boot Menu
    03/29/2004-nVidia-nForce-6A61BM4CC-00

    I knew as soon as I sent the message someone would correct me about IDE1 and IDE2.
    Yes I have now disconnected the drives and I get messages now saying that there are no primary and secondary master and slave drives.  Also that the floppy disk fails.  Now I just checked and I can go into the BIOS Setup. So it seems before it was stuck checking the drives.

  • I am not having luck getting Lion to boot in 32 bit mode, what should I do?

    I run Watchguard mobile VPN to connect to my work network, but the only way it runs is in 32 bit mode, I am not having luck getting Lion to boot in 32 bit mode, what should I do?

    kisuke3 wrote:
    Lion runs in 64bit mode. I don't think you can force it to run to 32bit mode.
    You can try but quite frankly I've not seen anyone done this before
    Restart your machine while pressing 3 and 2 to force it to run in 32bit mode(this was a practice in Snow Leopard)
    if you ask me, my recommendation is to get Watchguard update its software to 64bit. this is the REAL solid solution for your problem. Apple does not adjust to 3rd party softwares, its the other way around.
    I meant "Lion runs in 64bit mode"

  • Anyone having problems getting CD covers to print after downloading latest software?

    Anyone having problems getting CD covers to print after downloading latest software?

    Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
    Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
    Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
    Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
    That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties.

  • HP 250 G3 - problems with Windows 10 boot

    I have problems with Windows 10 boot on my HP 250 G3. It often shutdown during boot. But boot is ok with Windows 8.1. Please release upgrade that solve this problem.

    SomeoneWithAnHP wrote:
    Guys this might be solution: Turn off your laptop. Disconnect all devices connected to the PC. Remove battery and disconnect from wall. Press the power button at least 20 seconds. Connect back battery and turn on your PC. It should be fixed by now, I did with my Pavilion 14, and both sleep and turning off problems were fixed.re:  Black Screen and Dead keyboard after locking computer. I tried this with my Envy 17t-3200 3D CTO.  Didn't help.  for this computer this means removing the back cover and unplugging the battery wiring harness form the Motherboard. I currently have sleep mode disabled when on AC and am still getting the black screen, dead keyboard lockup.  I really know I'm hosed since even the caps-lock is non-functional. I see this problem more when I'm at work were I tend to Win-L lock the screen when I walk away from my desk.  Seems like locking the computer then letting the screen blank is doing something evil. After I force a reboot, by keyboard backlight forgets it's setitngs and returns to full brightness. If I lock the screen then bring back the computer before the screen is blanked, it seems fine. I don't think there's any way to adjust the screen blanking when the lock screen is up (even my desktop power-saves the monitors after a few minutes on the Lock screen). I'm not sure it's HP or MS that should be looking into this.  My computer is about 3 years old so I can't pester HP with warranty requests. I'm not sure how prevelant this problem is. Are all Pavellions and Envy's having the problem?  Mine has Radeon graphics which was a bit unusual at the time.  I have to install the HP Display driver before any AMD updates or the screen dimming doesn't work (at least with win 7 and 8). Dave.  

  • Hi, can iMovie give pronlems during the boot process from my iMac Mine. I have often after working with iMovie that i get during the boot Psi SDXH pause so the boot process stops

    hi,
    can iMovie give problems during the boot process from my iMac Mini?
    I have often, after working with iMovie that i get during the boot Psi SDXH pause
    so the boot process stops at this point
    I have often reinstall OSX Mavericks
    regards,
    HenkfromWinterswijk
    Netherlands

    Hello Federico,
    Your EliteBook is a Business model.  Your issue would be best answered on the HP Enterprise Business Community Forum
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Can't get Powerbook to boot up...

    I have a powerbook 15" that I purchased in 2005; I usually have it in sleep mode last and when I went to use it last night, I noticed that the light in the front wasn't flickering on and off. I tried to power it up using the on/off button, but that didn't work either, so I don't know what's going on. Can't get it to boot up no matter how long I hold the power button. Any suggestions?

    Hi Emilio,
    If the suggestion that you received from Philo2 doesn't solve the problem, you might try holding down the start button for ten seconds. Wait a few seconds then try to start it again.
    Sometimes these PowerBooks go into deep sleep and don't respond to anything but a new startup.
    PB

  • SharePoint Designer workflow gives Claims Authentication error for some users. Problem getting output claims identity. The specified user or domain group was not found.

    We have a SharePoint Enterprise 2013 system at RTM level.  We've installed Workflow Manager 1.0 by following the steps at
    http://technet.microsoft.com/en-us/library/jj658588.aspx.  For the final step of Validating the Installation we created a simple list-level workflow and verified that the workflow
    is invoked successfully.  This is working successfully, but only for a single user.  If other users in the same site collection try to invoke the workflow on this same list we get the ULS Log Error:
    Claims Authentication          af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
    System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
    followed by:
    Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
    (as details below).
    All accounts that are attempting to use the Test Workflow (both working and non-working user accounts) are valid AD accounts and are included in the User Profile Sync that runs nightly.  All have Contribute or Design permission level (and for testing,
    Full Control). 
    What could cause the Claims Authentication to fail when certain users attempt to launch the workflow?
    Thank you for your response.
    Jim Mac.
    08/29/2013 10:22:51.94  w3wp.exe (0x2020)                        0x26D8 SharePoint Foundation        
     Claims Authentication          af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was
    not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.     at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType,
    Boolean forceSuccess)     at System.Security.Principal.NTAccount.Translate(Type targetType)     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity,
    SPClaim loginClaim)     --- End of inner exception stack trace ---     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdent... 94aa5c2d-fa45-9b83-b203-a92b20102583
    08/29/2013 10:22:51.94* w3wp.exe (0x2020)                        0x26D8 SharePoint Foundation        
     Claims Authentication          af3zp Unexpected ...ity, SPClaim loginClaim)     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String
    encodedIdentityClaimSuffix)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
    requestInfo, IClaimsIdentity identity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
    principal, RequestSecurityToken request, Scope scope)'. 94aa5c2d-fa45-9b83-b203-a92b20102583
    08/29/2013 10:22:51.94  w3wp.exe (0x2020)                        0x26D8 SharePoint Foundation        
     Claims Authentication          fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
    System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.     at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)    
    at System.Security.Principal.NTAccount.Translate(Type targetType)     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim)    
    --- End of inner exception stack trace ---     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim logi... 94aa5c2d-fa45-9b83-b203-a92b20102583
    08/29/2013 10:22:51.94* w3wp.exe (0x2020)                        0x26D8 SharePoint Foundation        
     Claims Authentication          fo1t Monitorable ...nClaim)     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)    
    at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
    requestInfo, IClaimsIdentity identity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
    principal, RequestSecurityToken request, Scope scope)     at Microsoft.IdentityModel.Securi... 94aa5c2d-fa45-9b83-b203-a92b20102583
    08/29/2013 10:22:51.94* w3wp.exe (0x2020)                        0x26D8 SharePoint Foundation        
     Claims Authentication          fo1t Monitorable ...tyTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
    principal, RequestSecurityToken request) 94aa5c2d-fa45-9b83-b203-a92b20102583

    Hi Aries,
    I am facing issue with work flow where Workflow goes to Suspend mode.
    I am facing an issue with SP2013 Custom Workflow developed using Visual Studio 2012.
    Objective of the Custom workflow: User fills the form and submit, list get updated and workflow will initiate and go for the process.
    Issue: After the deployment of WF, for first time when user is filling the form and submit, list is getting updated. But the Workflow Goes to "Suspend" mode. (
    This Custom Workflow has a configuration file where we are providing other details including ID of Impersonator (farm is running under Claim Based Authentication).
    Work flow works fine once when the Impersonator initiate the workflow (Fill the form and submit for approval) and everything works fine after that.
    Following steps are already performed
    1.Make sure User profile synchronization is started.
    2.Make sure the user is not the SharePoint system user.
    3.Make sure the user by whom you are logged is available in User Profile list.
    4.Step full synchronization of User Profile Application.
    From the ULS logs it seems the user's security token from the STS service and User profile service is not being issued.
    Appreciate any thoughts or solution.
    Following are the log files.
    <-------------------------------Information taken from "http://YYYY.XXXXX.com/sites/xxxx/_layouts/15/wrkstat.aspx" where it is showing workflow status as "Suspend"------->
    http://yyyy.XXXX.com/sites/xxxx/_vti_bin/client.svc/sp.utilities.utility.ResolvePrincipalInCurrentcontext(input=@ParamUser,scopes='15',sources='15',inputIsEmailOnly='false',addToUserInfoList='False')?%40ParamUser='i%3A0%23.w%7CXXXXX%5Csps_biscomdev'
    Correlation Id: f5bd8793-a53c-2127-bfb1-70bc172425e8 Instance Id: 14a985a0-60c8-42db-a42c-c752190b8106
    RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401
    {"error_description":"The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
    configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} {"x-ms-diagnostics":["3001000;reason=\"There
    has been an error authenticating the request.\";category=\"invalid_client\""],"SPRequestGuid":["f5bd8793-a53c-2127-8654-672758a68234"],"request-id":["f5bd8793-a53c-2127-8654-672758a68234"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["34"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["Bearer
    realm=\"b14e1e0f-257f-42ec-a92d-377479e0ec8d\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]79e0ec8d\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
    RequireReadOnly"],"Date":["Fri, 10 Apr 2015 19:48:07 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
    instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
    ULS Log
    04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Authentication Authorization agb9s Medium OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0 f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6k Verbose Value for isAnonymousAllowed is : False f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6l Verbose Value for checkAuthenticationCookie is : True f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=18.7574119057031 f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.73 PowerShell.exe (0x29BC) 0x2B9C SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {AF89E1D7-C47F-467B-8FD4-D7DC768820EE} 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Parent No 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Application Authentication Pipeline). Parent Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
    issuer. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Getting Site Subscription Id). Parent [S2S] Getting token from STS and setting Thread Identity f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Getting Site Subscription Id). Execution Time=0.341314329055788 f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Reading token from Cache using token signature). Parent [S2S] Getting token from STS and setting Thread
    Identity f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Reading token from Cache using token signature). Execution Time=7.5931438213516 f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajwpx Medium SPApplicationAuthenticationModule: Failed to build cache key for user  f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Topology aeayb Medium SecurityTokenServiceSendRequest: RemoteAddress: 'http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc' Channel:
    'Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustChannelContract' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Topology aeax9 Medium SecurityTokenServiceReceiveRequest: LocalAddress: 'http://c1vspwfe01.vitas.com:32843/SecurityTokenServiceApplication/securitytoken.svc'
    Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteSecurityTokenServiceOperationServer). Parent No f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
    issuer. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {F17590DF-49D9-439D-86BC-5AE6416BB765} f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8b Verbose Looking up  site
    http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {3847D5A4-15C6-4AF9-B062-E22BB555DF4F} f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0s1 High Identity claims mapped to '0' user profiles. Claims: [nameid: '', nii: 'windows', upn: '', smtp: '', sip: ''], User Profiles: f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0sr Unexpected UserProfileException caught.. Exception Microsoft.Office.Server.Security.UserProfileNoUserFoundException: 3001002;reason=The
    incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator.     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
    upManager, IEnumerable`1 identityClaims)     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() is thrown. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0su High The set of claims could not be mapped to a single user identity. Exception 3001002;reason=The incoming identity is not mapped
    to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. has occured.  f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ae0tc High The registered mappered failed to resolve to one identity claim. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
    3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator.     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
    upManager, IEnumerable`1 identityClaims)     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0()     at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()    
    at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
    secureCode)     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims)     at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
    contextUri, List`1 claims) f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
    3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator.     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
    upManager, IEnumerable`1 identityClaims)     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0()     at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()    
    at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
    secureCode)     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims)     at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
    contextUri, List`1 claims)     at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims)     at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
    contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
    outputIdentity, SPCallingIdentityType callerType)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)    
    at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
    principal, RequestSecurityToken request, Scope scope)'. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
    3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator.     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
    upManager, IEnumerable`1 identityClaims)     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0()     at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()    
    at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
    secureCode)     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims)     at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
    contextUri, List`1 claims)     at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims)     at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
    contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
    outputIdentity, SPCallingIdentityType callerType)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)    
    at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
    principal, RequestSecurityToken request, Scope scope)     at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
    principal, RequestSecurityToken request) f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteSecurityTokenServiceOperationServer). Execution Time=17.1551132895382 f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication fsq7 High SPSecurityContext: Request for security token failed with exception: System.ServiceModel.FaultException: The server was
    unable to process the request due to an internal error.  For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in
    order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message
    response)     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
    rst)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties) f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication 8306 Critical An exception occurred when trying to issue security token: The server was unable to process the request due to an internal
    error.  For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
    the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Application Authentication Pipeline). Execution Time=52.3525336320678 f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajezs High SPApplicationAuthenticationModule: Error authenticating request, Error details { Header: {0}, Body: {1} }.  Available
    parameters: 3001000;reason="There has been an error authenticating the request.";category="invalid_client" {"error_description":"The server was unable to process the request due to an internal error.  For more information
    about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as
    per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} . f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 8nca Medium Application error when access /sites/testrpa2/_vti_bin/client.svc, Error=The server was unable to process the request due to an internal
    error.  For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
    the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response)     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
    rst, RequestSecurityTokenResponse& rstr)     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context,
    Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationAuthentication(Uri context,
    SecurityToken onBehalfOf)     at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.<>c__DisplayClass4.<GetLocallyIssuedToken>b__3()     at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated
    secureCode)     at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.ConstructIClaimsPrincipalAndSetThreadIdentity(HttpApplication httpApplication, HttpContext httpContext, SPFederationAuthenticationModule fam)    
    at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.AuthenticateRequest(Object sender, EventArgs e)     at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=62.2890618779761 f5bd8793-a53c-2127-8485-418c67f110f6
    Regards
    Sakti

  • Problems getting selected values from HtmlSelectManyCheckbox

    Hello,
    I am having problems getting values via getSelectedValues() from my HtmlSelectManyCheckbox component. The method returns an object array but the values are the same as the initial selectItems property.
    JSP:
    <h:selectManyCheckbox id="checkBox"
        binding="#{userEditBean.manyCheckbox}"
        value="#{userEditBean.groupIds}"
        layout="pageDirection">
      <f:selectItems value="#{userEditBean.allGroups}"/>
    </h:selectManyCheckbox>
    <h:commandButton action="#{userEditBean.ok}"     value="OK"/>Bean:
    public class UserEditBean extends BaseBean {
        private HtmlSelectManyCheckbox manyCheckbox = new HtmlSelectManyCheckbox();
        private String[] groupIds= {};
        private List allGroups = new ArrayList();
        public String[] getGroupIds() {
                groupIds= backing.getSomeIds();
                return groupIds;
        public void setGroupIds(String[] ids) {
            this.groupIds= ids;
        public HtmlSelectManyCheckbox getManyCheckbox() {
            return manyCheckbox;
        public void setManyCheckbox(HtmlSelectManyCheckbox newC) {
            this.manyCheckbox = newC;
        public List getAllGroups() {
            allGroups = backing.getAllGroups();
            return allGroups;
        public void setAllGroups(List newList) {
            this.allGroups = newList;
        public String ok() {
            Object o = manyCheckbox.getSelectedValues();
        }The problem is, the getSelectedValues() returns the values from the initial state of the page. The is no mark of the changes made by the user. Any help will be appreciated
    Thanks,
    Matek

    Your approach is somewhat odd. The selected values are just reflected in the groupIds, but you're overridding it with backing.getSomeIds() each time when the getter is called.
    Here is a basic working example:<h:selectManyCheckbox value="#{myBean.selectedItems}">
        <f:selectItems value="#{myBean.selectItems}"/>
    </h:selectManyCheckbox>
    <h:commandButton value="submit" action="#{myBean.action}" />MyBeanprivate List<String> selectedItems;
    private List<SelectItem> selectItems;
    // + getters + setters
    // You can use initialization block or constructor to prepopulate the selectItems.
        selectItems = new ArrayList<SelectItem>();
    //or
    public MyBean() {
        selectItems = new ArrayList<SelectItem>();
    public void action() {
        // The selected items are reflected in selectedItems.
        for (String selectedItem : selectedItems) {
            System.out.println(selectedItem);
    }

  • Problem getting correct data from MS Access after doing an Update

    Hi all,
    I have a problem getting correct data after doing an update. This is the scenario
    I am selecting some(Eg: All records where Column X = �7� ) records and update a column with a particular value (SET Column X = �c� ) in all these records by going through a while loop. In the while loop I add these records to a vector too, and pass it as the return value.
    After getting this return value I go through a for loop and get each record one by one from the DB and check if my previous update has actually happened. Since No errors were caught while updating DB, I assume all records are updated properly but my record set shows one after another as if it has not been updated. But if I open the DB it is actually updated.
    This does not happen to all records, always it shows like this
    1st record     Mode = �c�
    2nd record     Mode = �7�
    3st record     Mode = �c�
    4nd record     Mode = �7�
    9th record     Mode = �c�
    10th record     Mode = �7�
    I am relatively new to java and this is someone elses code that I have to modify,So I am not sure if there some thing wrong in the code too
    //Here is the method that gets records and call to update and add to vector
    public static Vector getCanceledWorkOrders() throws CSDDBException{
    //Variable declaration
      try {
        objDBConn = DBHandler.getCSDBCon();
        strSQL  = "SELECT bal bla WHERE [Detailed Mode])=?)";
        objStmt = objDBConn.prepareStatement(strSQL);   
        objStmt.setString(1, '7');
        objWOPRs = objStmt.executeQuery();
        while (objWOPRs.next()) {
         //Add elements to a vector by getting from result set
          //updating each record as PROCESSING_CANCELLED_WO(c)
          iRetVal = WorkOrderDetailingPolicy.updateRecordStatus(objPWODP.iWorkOrderNumber, objPWODP.strPersonInformed, EMSConstants.PROCESSING_CANCELLED_WO);
          if (iRetVal == -1) {
            throw new NewException("Updating failed");
      catch (Exception e) {
        vecWONumbers = null;
        throw new CSDDBException(e.getMessage());
      }finally{
        try {
          objWOPRs.close();
          objStmt.close();
          DBHandler.releaseCSDBCon(objDBConn);
        catch (Exception ex) {}
      //return vector
    //here is the code that actually updates the records
    public static int updateRecordStatus(int iWONumber, String strPerInformed , String strStatus) throws CSDDBException{
       PreparedStatement objStmt = null;
       Connection objDBConn  = null;
       String strSQL = null;
       int iRetVal = -1;
       try{
         objDBConn  = DBHandler.getCSDBCon();
         objDBConn.setAutoCommit(false);
         strSQL = "UPDATE Table SET [Detailed Mode] = ? WHERE bla bla";
         objStmt = objDBConn.prepareStatement(strSQL);
         objStmt.setString(1, strStatus);    
         objStmt.execute();
         objDBConn.commit();
         iRetVal = 1;
       }catch(Exception e){
         iRetVal = -1;
       }finally{
         try{
           objStmt.close();
           DBHandler.releaseCSDBCon(objDBConn);
         }catch(Exception ex){}
       return iRetVal;
    //Here is the code that call the records again
      public static WorkOrderDetailingPolicy getWorkOrders(int iWorkOrderNo) throws CSDDBException{
        Connection objDBConn = null;
        PreparedStatement objStmt = null;
        ResultSet objWOPRs = null;
        WorkOrderDetailingPolicy objPWODP = null;
        String strSQL = null;
        try {
          objDBConn = DBHandler.getCSDBCon();    
          strSQL = "SELECT * FROM [Work Order Detailing] WHERE [Work Order No] = ?";
          objStmt = objDBConn.prepareStatement(strSQL);
          objStmt.setInt(1, iWorkOrderNo);
           objWOPRs = objStmt.executeQuery();
          if (objWOPRs.next()) {
            objPWODP = new WorkOrderDetailingPolicy();
            objPWODP.iWorkOrderNumber = objWOPRs.getInt("Work Order No");
            //......Get Record values
        catch (Exception e) {
          objPWODP = null;
          throw new CSDDBException(e.getMessage());
        }finally{
          try {
            objWOPRs.close();
            objStmt.close();
            DBHandler.releaseCSDBCon(objDBConn);
          catch (Exception ex) {}
        return objPWODP;
      }

    Hello,
    Can you put an example of your problem online?
    Are you sure you're not having problems with case sensitive data?
    Thanks,
    Dimitri

Maybe you are looking for

  • Music on External Hard Drive

    Like many people I store my music files on an external hard drive to prevent my Mac hard drive from filling up. However I find iTunes doesn't keep the settings for the drive in preferences (as a library location) and reverting to users/[username]/mus

  • Difference between file structure; iTunes, XP and Vista

    I've noticed if I use iTunes to keep my music file organized that there's a difference between the way it organizes the file structure on XP vs Vista. In Vista it puts a Music folder in the iTunes Media folder whereas on XP it puts all the music dire

  • Server NAT crashed after install server.app 2.1 in OSX 10.8.2

    I have a server (mac mini) OSX 10.8.2. It was working with DHCP and NAT activated manually (command line) but after update it, service NAT do not work. I followed all steps that show here http://support.apple.com/kb/HT5215 without success. I have 2 i

  • Add new annotation to existing class

    Say I wrote my own annotation type: @Target(ElementType.TYPE) @Retention(RetentionPolicy.RUNTIME) public @interface  MyAnnotations {      boolean isHappy() default false; }I can now annotate my own classes: @MyAnnotations(isHappy = true) class MyClas

  • Why are my Airplay devices missing from the desktop Airplay menu bar?

    From my desktop, all devices are visible in iTunes and when I option-click volume.  All devices are visible from my IOS devcies.  But most devices are missing under the Airplay menu at top of my desktop. The only devices visible are Apple TV.  Thus,