Problems hearing an incoming caller after update to ios7

Since I upgraded to the original ios7 update I cannot hear when speaking or hear the other person when speaking directly from headset - it is very muffled.  I can hear fine on bluetooth or with earphones - any advice

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

Similar Messages

  • Why can't I make a phone call after updating to iOS7?

    Since updating, anytime I try to make a phone call it appears that the phone connects but I cannot hear anybody on the other end.  All I hear is my own echo?
    Has anybody else had this experience?
    Any ideas?
    Help!!!!

    That screen is telling you the iPhone has entered the recovery mode...you must follow the recovery mode instructions in http://support.apple.com/kb/HT1808 to attach to a computer running iTunes, in summary:

  • I cannot make outgoing calls after update to iOS7.1

    since i updated my iphone4s i have been having problems making outgoing calls... cannot send sms either.. got a call and thats about it since the update.. pls i need help with this.. i have tried the *#31# that did not work, switched off the wifi and all, nothing worked.. tnx in advance

    What you describe...
    Two iPhones
    Same issue
    Same general physical location (your house?)
    ... sounds very much like " cellular signal dead spot " OR "radio frequency interference"
    Test this by noting exactly where in your house that this takes place and also where it does NOT. Repeat until you have a "Map" of the good and bad spots.
    You cannot do much about the cellular signal but may be able to troubleshoot the interference problem. This document talks about Wi-Fi and Bluetooth, but the "Sources" might also apply to your cellular signal problem - radio waves are radio waves.
    Wi-Fi and Bluetooth: Potential sources of wireless interference - Apple Support
    ÇÇÇ

  • I have a problem in the Bluetooth headset after updating iOS 7

    I have a problem in the Bluetooth headset after updating iOS 7

    Hi,
    have a similar problem here. More specifically, I am using a Plantronics Voyager Legend (brand new) with my Iphone5 (iOS 7.0.2). All apps are working great with the headset, e.g., listening to music, normal phone calls, etc. No sound distortion at all.
    When I use Skype (most recent version, which is 4.12.258) the sound is very distorted, like scattered. I also successfully used the same headset with a Samsung Galaxy S3 and Skype. No problems. So, I suspect that it must be the combination of Iphone/iOS7 and Skype which messes up the sound.
    Does anybody else have the same problem when using that combination of devices and apps?
    Best,
    Kurt

  • After updating to IOS7 on iPhone 4S on a call pads show up and a mute is pressed accidentally while on a call

    After updating to IOS7 on iPhone 4S on a call pads show up and a mute is pressed accidentally while on a call

    I noticed that one person stated enabling cookies in Safari settings solved this problem.  I too had this issue for about two weeks.  Once I enabled all cookies in Safari settings, the little "AGREE" button became available in the lower right hand corner when accepting the new terms and conditions.
    Shutting down no app helped me.  The only way was to enable cookies in Safari settings through General Settings.

  • Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too :(

    Anyone having same problem? I phone 4 after updating to Vers.5.1.1. battery cannot be 100% full charge, always stop at 99% and battery drains off fast too

    I had major issues with the iPhone 4s battery, however it’s resolved.
    The tech who set the phone up at the Apple store did so with little training.
    if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
    Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
    turning of locator and the push notifications from facebook--they have a lot!

  • How im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

    how im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

    What "auto shutdown problem" are you talking about?

  • Plz hlep my : iso 7  4s /There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is

    There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is
    Imei: 013055008069758
    SerialNumber:DN*******TC0
    mlbserialNumber: DQ************42D
    plz hlep me
    <Personal Information Edited by Host>

    There is a problem in my iPhone device after updating the new version needed to Active iPhone 4s
    and
    I upgraded to 7.0.3 yesterday and now my battery only lasts about 4 hours with very little active use.
    iOS 7.0.3

  • There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is

    There is a problem in my iPhone device after updating the new version needed to ActiveX wants amyl, bus and my Lord and unfortunately forgot this data, what work Please reply my machine data is
    Imei: 013055008069758
    SerialNumber:DN*******TC0
    mlbserialNumber: DQ************42D
    plz plz plz hlep me
    <Edited by Host>

    There is a problem in my iPhone device after updating the new version needed to Active iPhone 4s
    and
    I upgraded to 7.0.3 yesterday and now my battery only lasts about 4 hours with very little active use.
    iOS 7.0.3

  • Problem from ID phone after updating on iOS7 I can't activate your iPhone!

    Good afternoon! Problem after updating on iOS7 I can't activate your iPhone old ID I demands it I don't remember! serial number F17JGDCXTTR. IMEI 013336008605472. Model A1428. I live in Belarus in the city of Minsk and we have no service centers Apple! That to do me my new ID [email protected]
    Help please! My e-mail [email protected]

    ITunes says:
    At the moment the iPhone is tied to the Apple ID (i ***** @ y *****. Ru). Sign in with Apple ID, which is used to configure this iPhone.
    Unlock iPhone on this I ***** @ ya *****. Ru impossible.

  • I am unable to make calls after updating ios7. Its saying call failed every time

    I am unable to make calls after updating ios7. Its saying call failed every time when I make a call to anyone.

    follow this thread https://discussions.apple.com/message/23340070#23340070

  • I am using i5,updated to ios 7,problem is after updated to ios7 whenever i conncet my phone for charging, at first notification i am getting is "this accesorries is not supported in this device", but phone is charging, before switched to ios7 it was ok.

    i am using i5,updated to ios 7,problem is after updated to ios7 whenever i conncet my phone for charging, at first notification i am getting is "this accesorries is not supported on this device", but phone is charging, before switched to ios7 it was ok, i am getting this notification each time i am connect my phone for charging, or laptop, why i am getting this?

    I am not using extra cable for charging the phone or sync to pc, one cable which came with the phone.it was a full intact box.  Which i use for charging  my phone and also i am using that cable for sync to my pc, when i was using ios 6.1.4 at that time that notification didnt shown up in my phone,it was ok,  when i switched to ios7, i have started getting this notification, my friends are also using i4, i4s, and i5, they are also updated to ios7, but they are not getting the notification which i am getting in my phone after connecting my phone with the cable, so what is the solution? It will be very helpful for me if you give me any plz...

  • TS1398 I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    Ask your question in an iPAD forum.
    This is the OS X Mountain Lion forum.

  • I cant hear Voice during call after i upgrade 7.1 i use iPhone 4

    I cant hear Voice during call after i upgrade 7.1 i use iPhone 4

    Hey there Goesdhar,
    It sounds like you are not getting sounds from your receiver on your phone. I recommend the troubleshooting from the followint article named:
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Increase the volume during the call.
    Make sure nothing is blocking the receiver. If you're using a protective case or display film, remove it and try again.
    Make sure nothing is plugged into the headphone jack or the dock connector.
    Check the receiver opening to see if it is clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush.
    Try another location with better signal. If the audio issue happens only when on a call, it could be due to the location.
    If the iPhone is paired with a Bluetooth headset or a car kit, try turning off Bluetooth on your device. Learn more about troubleshooting Bluetooth connections.
    Restart the iPhone.
    Make sure your device is up to date.
    If the issue is not resolved after restoring the iPhone software, contact Apple Support.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

Maybe you are looking for

  • My iPod resets randomly, among other things......

    Any help would be greatly appreciated. Here are the facts: 1. I have a 60g 5G iPod. (It's black) 2. I am running windows XP. 3. The first time I tried to update the iPod, it added about 20 songs and resetted itself. 4. It now does everything from not

  • Adding field in material master

    Hi All, I am trying to add field manufacture part number in material master. In field selection Manufacture part number (mara-mfrpn) field is optional. I checked the field selection group at material type level, transaction code field selection group

  • 4/30/2014 - Beta - Flash Player 14.0.0.90

    The latest Flash Player 14 builds are now available.  You can download Flash Player here: http://www.adobe.com/go/flashplayerbeta. New Features for Flash Player 14: Anisotropic Filtering This new texture sampling filter can enhance the image quality

  • Unable to sort the content of the jTable

    Hi all , I m using this code for sorting in the Jtable JTable table = new JTable(new MyTable());         table.setPreferredScrollableViewportSize(new Dimension(500,500));         table.setFillsViewportHeight(true);         table.setAutoCreateRowSorte

  • Redhat server/windows client

    Hi, I have installed oracle 9ir2 on redhat 8 and have installed Oracle 9ir2 client on windows 2000 I have started the TNS listener on the server but when i try to configure the client and test the connection it cant connect I could very well be missi