Problems hosting iWeb with domain name.

I have a business web site that I host with iWeb08 using a domain name. I had the domain name working perfectly with iWeb. I would log on to my web site via my domain name and all my content was there as I expected. Whenever I upload a new addition to the web site I always click "view published site" which is taking me to http://web.me.com/username/pages and everything is there as I expected it. Recently, I went to my web site via my domain name and realized that all my recent updates are not being hosted online (with domain name). web.me is fine though. I checked the registration on my domain name and it is active. Any thoughts? Thanks in advance
Message was edited by: Bob3hills

I went to my web site via my domain name and realized that all my recent updates are not being hosted online (with domain name). web.me is fine though. I checked the registration on my domain name and it is active.
Are you using url forwarding? If so, perhaps you changed your mobile me site in a way that requires you to change your forwarding as well.
Could you provide both urls so we can see the differences you are talking about?

Similar Messages

.mac does not work with domain name

I used Iweb 08 to host my domain name from godaddy.com.
Godaddy account is: http://www.eyalphotography.com/
.mac web page is: http://web.mac.com/enahmias
I published to .Mac and went through the personal domain name procedure (using .Mac account settings and godaddy CNAME) so now .Mac is my host and I don't upload anything to godaddy. Updates are made to .Mac. but even after 4 days when trying to go to http://www.eyalphotography.com/ I still get this message: “Safari can’t open the page “http://www.eyalphotography.com/” because it can’t find the server “www.eyalphotography.com”. If I go to http://web.mac.com/enahmias no problems.
I want my page updated to http://www.eyalphotography.com/ that is the whole point of doing the cname and forwarding my domain. People should just go www.eyalphotography.com and done.. not web.mac.com/eyalphotography etc.. it beats the purpose of this thing.
So any solutions why it’s not working?

Here is a step by step on how it finally worked for me.
1. From Iweb choose domain name
2. when logged to .mac click on domain name
3. If you have any troubled name there just remove it.
4. Create a new domain name and follow instructions until it says to go to your domain registrar and continue later
5. Log to godaddy.com
6. Under the Domains menu click on My domain names
7. Click on your domain name that you want to change cname for .mac
8. On the top third of the page in the middle click on Total DNS Control and MX Records
9. On the page that opens in the cnames section click on the Reset to default setting
10. Wait a few minutes, and then refresh the page. Then on the same section under www. click on the pencil icon to edit the cname
11. Leave www. alone and on the next line type: web.mac.com and ok the changes.
12. Log out of godaddy
13. Return to the .mac domain name dialogue box and finish according to the prompts.
14. Go back to iweb and republish ALL to .mac
15. In my case it took only a few hours and after 2 weeks of frustration it worked as magic.
Good luck
Message was edited by: eyaln

ERROR:Cannot connect to Host: [MTW02SDEP02] with user name: [Administrator]

Dear All,
When I try to deploy WD application, it gives me this following error and doesn't deploy.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [MTW02SDEP02] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during getInitialContext operation. No server is running. [Root exception is
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
     at com.sap.engine.services.security.remote.login.RemoteLoginContextExt.<init>(RemoteLoginContextExt.java:34)
     at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:81)
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:355)
     ... 38 more
Caused by: com.sap.engine.services.rmi_p4.P4ConnectionException: Possible problem: no available running server node. Check your running servers.
     at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:709)
     at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:697)
     at com.sap.engine.services.rmi_p4.Parser.newRequest(Parser.java:180)
     at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:427)
     ... 1 more
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted

Hi
Try this
1. Is this is the remote server?
   if yes make one entry in host file under C:\WINDOWS\system32\drivers\etc
    format   : <server ip> <servername>
    restart NWDS
2.If not then put the Ip address instead of name inside Window--preference --Sap server Check.
3. Put some different UserId and Password who has deployment rights
Best Regards
Satish Kumar

Get the pc name with domain name and add it to my properties file using commands

i want to get the pc name with domain name and add it to my properties file using powershell .
sid

function Get-Environment{
[environment]|Get-Member -Static -MemberType Properties |
ForEach-Object{
if($_.Name -ne 'StackTrace'){
$v=[scriptblock]::Create("[environment]::$($_.Name)").Invoke()
New-Object PsCustomObject -Property ([ordered]@{Name=$_.Name;Value=$v[0]})
Get-Environment
Get-Environment | Out-String | Out-File environment.txt
¯\_(ツ)_/¯

Is the Oracle apps R12 can be installed with domain name like xyz .co.nz

Dear all,
I am installing R12 on Linux AS-4
I need to know the Oracle apps can be installed with domain name like <xyz>.co.nz on Linux AS-4 environment.
if so please discuss anything other than normal procedure I have to take care?
Till now I have installed much with Domain name as <xyz>.com
Thanks and regards
Vasu

If your domain name has two characters, then you may run into the Microsoft IE 6 bug "Internet Explorer Does Not Set a Cookie for Two-Letter Domains" described in Microsoft article Q310676. The fix for this issue is described in the Microsoft article.
Internet Explorer does not set a cookie for two-letter domains
http://support.microsoft.com/default.aspx?scid=kb;en-us;310676
Apart from the above, you should not have any issue.

IWeb - pointing domain name to MobileMe host

Hi - I have been working to direct a domain name purchased through godaddy (mygodaddydomainname.com) to my mobileme website (web.me.com/myname/myblogblogname), where I'm publishing a page using iweb.
The goal is for someone to look under the (mygodaddydomainname.com) name and see the site built with iWeb and hosted at (web.me.com/myname/myblogblogname).
You would think it was simple but I am having difficulties.
I followed the cname instructions in support at Apple & at GoDaddy but it isn't working. Does anyone have any good ideas?
Gratefully,
Lillian

This Apple document tells how to configure your MMe account for CNAME forwarding: Setting up MobileMe to use a personal domain name. Then follow GoDaddy's instructions for their end.
If you don't want to use CNAME forwarding but just the standard forwarding you don't need to do anything on MobileMe's end. At GoDaddy it will look this this:
Click to view full size
You can either choose with masking or not. Masking will only display mygodaddydomainname.com in the URL window of each page. The downside to that is that visitors can only bookmark the first page of your site. That may or may not be a problem with your site. My tutorial site is set up that way: http://toadstutorials.info.
OT

IWeb site with domain name

I have created a website using iWeb and have uploaded it to my .Mac account. Now I would like to create another one but use my own domain name. Can I do that?

Yes. Create a new site and then use domain forwarding from where you bought the domain name to forward that domain to the url of your second site.
I use iWebSites to manage multiple sites much like iPhoto Library Manager and multiple libraries. Here's how I do it:
One way to handle multiple sites is to use iWebSites. It lets me create multiple sites and multiple domain files. If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites.
It allows me to edit several sites and then publish only those I want to update. I can keep the changed sites unpublished as I see fit.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How to use iPhoto web gallery with iWeb & personal domain name

So, another question about iWeb 08:
I've set up my site to use a personal domain name, like www.mypersonaldomain.com. I've configured everything with my DNS settings so that it actually points to my iWeb site, and I'm happy about that.
However, I've imported a few iPhoto '08 web galleries into my site, but when I browse to them by going to www.mypersonaldomain.com and clicking on the link for my gallery, it goes to a URL that actually shows my .mac account, i.e. gallery.mac.com/sockdaddy/gallery1/photo.jpg
Is there any way to have the web galleries that I'm using become a more transparent part of my iWeb site, and use my personal domain?

I've never done this on .Mac but I do use this on my server. I don't see why it wouldn't work.
In iPhoto select your web gallery and in the "file" menu select "export" and then "Web Page".
Select your options and click "Export" to the desktop.
There are now 4 folders and an index.html file.
Change the name of the index file to whatever you want to call the page e.g WebGallery.html
Now go to Finder/Go/iDisk/My iDisk/Web/Sites and open your website folder.
Drag and drop the 4 folders and the html file from your desktop into this.
Create a link to this from your website in the "link" inspector and choose "external page".
The URL for the link will be the same as any other page on your site except WebGallery is substituted for the page name.
If you check the "open link in new window" you won't have to worry about the fact that you don't have a link back to your site from the WebGallery page.

Having problems with maverick and outgoing mail with domain name

hi
i just upgraded my operating system from mountain lion to maverick. i did a clean install on a new hard drive.
anyways, my desktop mac mini computer using mountain lion is having no problems with my outgoing mail with my domain name.
smtp.1and1.com
custom port 993
SSL
password
using the exact same info on my laptop with maverick
no dice.
mail comes in but can't email out with my domain name
i tried - smtp.1and1.com:(email address)
any suggestions
thanks
phil

Hi, Phillip Chin.
Thank you for the question. The article below will help you troubleshoot the issue that you are experiencing with mail.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Cheers,
Jason H.

IWeb: Won't publish (update) with Domain name

I have a site that I have used iWeb to create. I recently, got a domain name from www.godaddy.com. I have had it for a few days, and I have had a some things go wrong. First, the web counter that iWeb provides, doesn't work on my site. The counter will publish but it only shows one number (it doesn't go higher). Because it would not work, I decided to delete the counter from my site. Second, I tried to rename one of the pages from "My Podcast" to "Media" but when I try visiting my site, it still says "My Podcast," but when I click on it, a window shows up that says that Apple can't find the sight because it may have been deleted. So, I fixed that by making the page say My Podcast again (which fixed it). Finally, I tried updating some information on my site, and it says that the site published, but when I visit the site, it doesn't have anything that is changed at all.
I can't figure out what is wrong and I need some help. Thanks!

With rapidly reloaded pages, sometimes the browser will show you information from its cache in order to deliver the information to you as fast as possible. Unfortunately, with frequently updated pages, this browser caching strategy doesn't work so well.
To make sure that you are seeing the most up-to-date version of your website, try emptying your browser cache. In Safari, look under the Safari menu and select "Empty Cache". You can also try to add a "?" after your URL to tell Safari to ignore whatever is in its cache.
I have just checked your website and all the links look to be functional. So I am 100% sure that it is a caching issue for you.
As far as the iWeb hit counter goes, you are using domain forwarding with masking to hide the .Mac address. This masking feature prevents the hit counter from displaying correctly or at all. Disable masking and you will see your hit counter as normal. Even if it is not displayed, it will still be counting.

Webvpn GW's on one router with domain names

Hi,
I'm trying to configure multiple WebVPN gateways on one router using one front door VRF and multiple back door VRF's. Think of this like a cloud service provider with several customers using different VRFs and one Internet VRF used for the incoming connections for the remote users.
Doing so, several scenarios arise:
Using one gateway and several context with a seperate VRF for each.
Please let me know if I am wrong here:
I can only assign one trustpoint because I only have one gateway. This means that all users connecting can only use one domain name like "*.isp.com". This also implies the use of a wildcard certificate.
Using several gateways and several context with a seperate VRF for each.
I can only assign multiple trustpoints because I only have one gateway. This means that users connecting can use multiple domains name like "webvpn.clientA.com" and "webvpn.clientB.com".
I would prefer the first situation but then I run into a second problem:
There are several commands related to hostname and up till now I have not figured out which one does exactly what:
ROUTER(config)#webvpn gateway WEB_GW
ROUTER(config-webvpn-gateway)#hostname
ROUTER(config)#webvpn context CUST1_CT
ROUTER(config-webvpn-context)#gateway WEB_GW domain
ROUTER(config-webvpn-context)#gateway WEB_GW virtual-host
Is there anyone who can explain to me what exactly does what?
My personal guest is that I only need to configure the virtual-host like this" CUST1_CT -> virtual-host cust1.isp.com and CUST2_CT -> virtual-host cust2.isp.com". But I'm not sure about this and up till now I have not found any documentation that describes this very clearly.

I think for this to work correctly and be able to split traffic between the 2 ISPs, you would need to use BGP, because default is going to use one ISP or the other.
If you can use BGP, this link will help you in load shearing between multiple ISPs when you have one router.
http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13762-40.html#conf4
HTH

IWeb own domain name blocked on MobileMe

Dear Apple experts,
I had a website created via iweb, hosted at apple with its own domain name www.onetobe.be I didn't manage this myself and the person who do it forgot to cancel the site before mobileme closure and even if the CNAME has been modified at the registrar, the domain still point to mobileme. The new web site works with the root name onetobe.be but any configuration I set at the registrar give either mobileme closed page or nothing. Who can I contact to cancel all registration of this site on apple system.
Thank you

Dear Wyodor,
Thank you for your swift and polite answer, I'm not an expert, So sorry if I look like a "rtfm" guy, but this is the reason why I asked for help.
I'm a great apple fan and I was very sad when apple turned down these so useful and easy services such as iweb, idisk, gallery. It seems to me that the "digital me" concept of late M. Job is, well, changing now.
the new web site system for my site (wix) seems to give kind of the same option as redirecting the own domain name to the actual real web site at this wix provider.
If I set the forwarding for onetobe.be to only http://oliviervanhorenbek0.wix.com/onetobe it doesn't work
So I'll asked the registrar how I can un-masquerade the www.onetobe.be.
Any additionnal info for how I can configure the domain "properly" will help me.
Thank you again for your time.

ERROR: Cannot connect to Host: [SERVER] with user name: [J2EE_ADMIN]

Hello SAP experts
I have started to deploy java SPS on a solution manager system, but has encountered some problems.
I've tried both JSPM and SDM, but get the following error:
Software Component 'ADSSAP'/ 'sap.com'/ 'SAP AG' / '1000 .7.00.16.0.20080610114809''/ '1 ':
Caught exception mens checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Can not connect to Host: [SERVER.domain] with user name: [J2EE_ADMIN]
Check your login information.
Exception is:
com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception vid getInitialContext surgery. No server is running. [Root exception is com.sap.engine.services.
I can not log on Visual admin, with user J2EE_ADMIN, I've checked the user is not locked in the ABAP stack. I have activated SAP * on the JAVA stack, but still can not log on, get this error:
Error while connecting
com.sap.engine.services.security.exceptions.BaseLoginException: Can not create new remote login context.
I've run out of ideas, please some suggestions.

SOLVED - Note 609603

IWeb and domain names 101

I know this material has been covered here before, but I'm having trouble putting the story together fully - sorry if this is repetitive, but:
I have a website up which I created in iWeb, and currently publish in iWeb using my Mobile Me account to host it. I assume that's how it's working anyway? I think the folders holding the site pictures etc are kept on my iDisk?
I have two questions
1) I want to purchase a simpler name for the site, and just work it so that everything is the same, but my site will now have a simple name, rather than the complex one it is assigned by iWeb (which uses my email address, etc etc)
How do I do that?
2) Is that the best way to do this, or are there benefits to having the site hosted by another service other than .Mac (or MobileMe - whatever it is porperly called these days.)
Thanks!

Please can you help.
I have two Mobile Me accounts, and I want to load a different personal domain on the second one to the first one. The first one is personal, and the second one is for a group practice. When I uploaded the pages to Mobile Me, it "assumed" that the pages intended for the second site were to be loaded to the first site under domain name 1. In fact, I want to get those pages under domain name 2. I have been to the domain provider's site and changed the CNAME so that it uploads under the second domain name. I assumed that I could have two separate domain names because I have paid two subs for Mobile Me. What I can't work out is how I can move the pages from the first account personal domain to the second account personal domain. Can anyone help please?

Problems setting a Yosemite domain name account for Send only

What do I do in Yosemite Mail so that my DOT MAC account is IMAP, but so that I can also send email from a domain account that is a POP account at GoDaddy?
My Dot Mac / iCloud account is my primary Mail account. I also have a domain name account that I use only for sending mail. The domain name account is a POP account, not an IMAP account. The domain server (not an Apple server) forwards the email to my Dot Mac account as it comes in, but I do NOT sync mail or even pick up mail from the domain name server.
With Yosemite, Apple apparently changed the way it deals with that situation. I say "apparently" because I'm having a hard time getting help on this. Before Yosemite, I had the domain account enabled, but while there was a password for sending there was no password for picking up the domain name mail. Every once in the while over the years that setup would get flaky (as Apple made changes on its end?) but usually it worked.
I continued that setup with Yosemite, but a few months ago I started having problems. My mail worked as normally, but during the night or the morning, many messages would arrive as unread duplicates, and many emails I didn't want deleted were permanently deleted. Oddly, in addition, I had an easy time keeping the setup on my MacAir but I had a hard time keeping it on my Mac Mini, even though both have Yosemite.
I took my MacAir to an Apple genius who said the settings had changed in Yosemite. He somehow reset the account for Send Only by clicking a box. Everything worked fine for a week or so,* But then I could no longer send domain name mail, I couldn't find the setting, and I went to another Genius, who didn't know what I was talking about and who couldn't solve the problem.
I need to be able to send my domain name account without making it an IMAP account, but can't figure out how.
thanks
* In other words, the Dot Mac IMAP worked correctly, the POP messages forwarded correctly to DOT MAC (without any duplication problems), and I was able to send mail from the domain account.

I've not tested it but if you simply leave the incoming mail server field in the Mail account preferences blank for that account blank but set up the outgoing server and do not check "include when automatically checking new mail" you should be able to send but not receive
OR undo the forward that you have set up from #2 to #1 and use both normally
LN

Problems hosting iWeb with domain name.

Similar Messages

Maybe you are looking for