Problems importing After Effects files into FCP

Hey guys--
So I have this odd problem importing my after effects clips into FCP. I am working in standard DV, and my After Effects composition settings match my FCP settings.
I am snipping little bits from my FCP project, exporting them to QT, adding stuff on top in AE, then shooting the clip back to FCP. The problem is, whent he clip goes back to FCP it is slightly "pinched." It's not really thaat visible, unless I try to edit a cut in the same shot. The after effects clip is a couple pixels wider, and the quality is a little blurry. If it is a hard edit, you wouldn't even notice the difference, but the two shots together make it pretty noticeable. I'm not set to square pixels or anything, and i get the same results no matter which codec i render in AE with.
Any ideas?

New Discussions ResponsesThe new system for discussions asks that you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts. When you mark a post with the tag, it will also mark the thread as Answered. If you receive the solution or answer to your question outside of the thread, then, and only then, at the top of the thread, mark the thread as Answered. This will mark the thread as Answered without marking an individual post as .
If we use the forums properly they will work well...

Similar Messages

Is there a way to Import After effect files into motion

I was wondering if there is a way to import after effects files into motion.

hi
no there is not. The only thing you can do is to export the layers out of AE as movies and import them into Motion. Of course you are then hard baking everything and you lose control, but that would be the same if you went to any other system.
adam

Importing After Effects file into Premier Elements?

Is it possible to create slide show in After FX and then import into Premier. After FX gives an option to export to premier, but then it exports as a .prproj file and Premier cannot open that. Please help.

Why not render a movie in AE, and use it in Premiere?

Importation of VOB files into FCP

I have been importing .VOB file into FCP on a Mac Pro 8 core without any problems. Last week I bought a MacBookPro 3.06 Core 2 Duo and I reinstalled the OS and used system migration to import the programs from my Mac Pro.
The MacBookPro will NOT open import the VOB file into FCP. Apple support said that VOB files are not supported. They suggested the power difference between the two computers allowed import in one and not the other. This does not make sense to me.
Any thought from the experts?

I've never known any version of FCP to work with VOB files natively or otherwise. Most people use MPEG Streamclip to convert to the format that will match their FCP Sequence settings.
-DH

Import after effects file (cc 2014) in premiere pro (CS6)

Hello, I try to import after effects file (cc 2014) in premiere pro (CS6), but it says that the file may be corrupted (I tride with several files with no success) , any idea ? (windows)

no can do... it's not backward compatible
you need to pre-render the comp to a digital intermediate file
preferably lossless
hahahahahahahahaha!!!

"The importer reported a generic error" when trying to import an After Effects file into Premiere.

Currently quite new to using both pieces of software - I'm trying to grab a file, either a save or an export, from After effects into Premiere. I've googled around, but I can't find anyone with a similar problem with it being an AE file.
Just looking for some advice on what to do.

Okay so I've searched around most of this forum and as much of Google as I could find - I have found similar problems, but nothing exactly the same; and none of the solutions I've found have worked for me. I've seen a lot of people having trouble connecting to the DL server on the file-selection window, but I don't even get that far - an error message just pops up in the middle of my screen - and my error doesn't mention a server, just that it can't connect to AE DL.
I changed firewall software (which I've wanted to do for months, anyway) and still to no avail.
As for the "The importer reported a generic error" problem also, I can't find any problems or solutions with After Effects files not being able to be imported.

I can't import After effects composition into sequence timeline

Hello everyone
I am using CS5.5 Master Collection and I have Premiere sequence which I have imported into After Effects via Dynamic Link; I have added some effects etc... Now I am trying to pull the sequence back into Premiere which I have done via Dynamic Link (import after effects composition), which imports the composition fine, however it wont allow me to add the composition to the timeline. It will however play the composition in the source window.
Has anyone else come accross this and how do I fix it?
I have tried looking on youtube and I can see it working for others and no one specifically shows or does anything different to what I am doing.. Please help me.
Kind regards,
Milan

I see what you are saying. I tested that scenario, and you are correct, it doesn't let you:
- create a premiere pro sequence
- open after effects
- import that premiere pro sequence
- make changes to that sequence in after effects
- open premiere
- import that after effects sequence
which is essense, would be a link back around back to a premiere pro sequence, so it's been dynamically linked twice.
It would be interesting if it did allow it, you could do some weird looping stuff, or probably blow up the software .
Remember, whatever you send over to AE in this method is "replaced with after effects composition", you aren't going to be able to "edit" it back in Premiere. You replaced that edit with an AE composition. You have to work with that in mind.
The main thing about dynamic link is it elimates exporting & importing to get to another program, by just using the project file itself instead as a clip.
Hope that clarifies things a bit for you,
- wb

How to import premier xml file into FCP X?

Hi There,
Premier has an export to "Final Cut Pro XML" option but how do you import these files into FCP X?
If I navigate from within FCP X, the file is greyed out and if I right click from the finder and open in FCP X I see the error:
The document “V1-0008_M07-1538.mov.xml” could not be opened. Final Cut Pro cannot open files in the “XML text” format.
I'm using FCP 10.1.1 and Premiere Pro CC 7.2.1
Any pointers in the right direction would be much appreciated.
Cheers

Looks like this is the only option: https://itunes.apple.com/us/app/7tox-for-final-cut-pro/id496926258?ls=1&mt=12

Importing a Motion file into FCP loses quality

When viewed within Motion the quality of the graphics, text, etc. is excellent. However, if I import the Motion file or a Quicktime movie of that file into FCP, the quality goes down. The text is ragged, as well as any graphics. I'm creating at NTSC DV. I tried importing one of the tutorial files and the same thing occurred. Any ideas?
Thanks, Matt

Seperate but related question - if my intention is to make a DVD that plays only on a computer, is there anyway to replicate the Motion quality in a computer only format?
I just don't understand why Motion's display so pristine yet FCP is not. I know it has been answered and explained, but I just don't get it.

Image problems importing Illustrator 10 file into Flash MX.

Hello,
I'm working on my portfolio and want to import an Illustrator
(version 10) file into Flash (Flash MX). The problem I'm having is
that when I import the Illustrator file into Flash, it comes out
looking blurred. I tried exporting the Illustrator file into
Photoshop and saving it as a JPEG, PNG, and TIFF (in each file
format, changing the image size to 72 dpi) and I still get the same
blurred result. I also tried saving the file for web, in
Illustrator (in JPEG and PNG formats) with no success as well.
The Illustrator file is a small collage of my graphic design
work (where I pasted graphic work done in Illustraor and made
clipping masks to collage them together), so I'm not sure if
bringing these files together maybe causing some technical issue or
is importing Illustrator files into Flash just something that will
always appear blurred. If so, is there a way I can bring the file
into Photoshop and work with it where I can import it without the
blurred appearance?
Any help will be greatly appreciated.

Hi Matthew,
Here's the Help doc that talks in more depth about Smart Objects:
http://help.adobe.com/en_US/photoshop/cs/using/WS41A5B796-6846-4e95-8459-95243441E126.html
And here's a section that goes into more detail on Placing files:
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-78f2a.h tml#WS634E6022-BC34-4aa8-857B-21D88D4C8D50a
We have multiple request to add support for externally linked files and certainly see the value. There also are a couple third party solutions that offer linked file behavior (I'm not sure what versions of Ps they work with). You can see and add to the request (and find the third party solutions) here:
http://feedback.photoshop.com/photoshop_family/topics/please_consider_a_references_tool_to _create_links_to_layers_or_folder_groups
regards,
steve

Problem Importing Importing Avid Mov File Into FCP

Hello all,
I had transitioned into this issue off an older thread I had, with a different topic. So I figured it was smarter to just make it it's own thread, since it's become it's own issue.
I am editing the core of a project on Final Cut Pro 6. A portion of the footage that was shot for this project though, was captured on a PC into Avid Media Composer 3.0, and therefore, converted to MXF format.
I am running both Final Cut Pro 6 (FCP 6) and Avid Media Composer 3.0 (AMC3) on my Macbook Pro, so I was able to import this MXF footage into AMC3. That was the easy part. The hard part, has been knowing how to properly export it, so I can then, properly import it into FCP6.
Important detail about the FCP6 System Settings:
- *The sequence preset is DVCPRO HD - 1080p24*
In the Avid, when I go to export a small 1 min clip (as a test), these are the Quicktime options I am given:
Fast-Export Quicktime NTSC
Fast-Export Quicktime PAL
Make New - QuickTime Reference
Pro Tools QuickTime (ref)
QuickTime Reference
Quicktime Reference DV Codec
Send To QT Movie
None of them were seeming to work. I was getting this message:
"Long GOP media can not be exported using same as source. Please select a custom resolution or transcode to an I-frame only resolution."
*Send To QT Movie* seems to be the only one that works. But I then had to go in and customize it, making my own Saved preset for this.
I've now so far tried this with 4 custom presets, and while all of them are able to export and play / look fine on my desktop..... none of them import correctly into FCP6. They'll play as clips... but completely stuttery and unusable. I'll then drop them into a sequence, and they'll play for about 3 seconds and then I'll get this message:
"Warning - Dropped Frames
One or more frames were dropped during playback.
If this occurs frequently, try:
- Turning off 'Unlimited RT'
- Lowering your compression data rate.
- Closing open sequences.
- Lowering the preference for real-time audio tracks.
- Increasing the speed of your system and/or disk drives and/or network connection."
Now, I've also gotten a message about the projects needing to have the same capture preset, but I can't replicate it at the time of this post. Though, I'm sure this is probably the root of the problem.
Here's why: In AMC3, with my custom export preset, I notice that Avid supports the DVCPRO codecs, but doesn't have the exact one I'm using in FCP6.
Here's what I have in my AMC3:
DV/DVCPRO - NTSC (this is the one I'm using, and have tweaked the frame rate to 23.98)
DVCPRO - PAL
DVCPRO HD 1080i50
DVCPRO HD 1080i60
DVCPRO HD 1080p25 (this one is close...)
DVCPRO HD 1080p30
DVCPRO HD 720i50
DVCPRO HD 720i60
DVCPRO50 - NTSC
DVCPRO50 - PAL
Now, you'll remember that my sequence preset in FCP6 is DVCPRO HD - 1080p24.
Because this doesn't exist in Avid, I went with DVCPRO HD 1080p25 and just customized the frame rate to 23.98.
Still no cigar though.
Does anyone have any suggestions on how I should further customize the Avid codecs? Or is there even a way to just download more Avid DVCPRO codecs so I can find one with 1080p24?
Sorry for such a long post. I like to be thorough.

Hi Kyle,
Just some more backstory:
This was a two day shoot.
- One Day 1 of the shoot (Saturday), we shot with the Sony camera, on Sony DVC tapes (MiniDV). This was about 20 gigs worth of media shot that day. That footage was later captured onto an Avid MC 3.0 in MXF format. (I still have it all raw on my passport drive if you need further info about those files)
- On Day 2 of the shoot (Sunday), we got the camera we wanted all along for the shoot -- the Panasonic HVX200. Therefore, all of Day 2 was shot on P2 cards, converted on a Macbook Pro, and then put onto an external harddrive. This was about 80 gigs of media.
Right now, when I watch the Sunday footage (Sony) on FCP6, I do indeed see faint horizontal lines on the canvas, when free-framed and at 100%. They're not terrible... but they're there. (I'm not great at this, so if you need total confirmation, I can upload you a large rez screenshot so you can decipher if the interlaced lines are there)
Now, I just checked this out on the Sunday footage as well (the Panasonic P2 card footage which wasn't converted, but imported directly into FCP6, without need for the Avid as the middle-man), and I see the same faint lines on this as well.
Both pieces of media (the original Panasonic footage and the converted Sony footage) are at 29.97FPS. Both are at the same Compressor now (DVCPRO HD 1080p30) per your instructions . Meaning, the Pansonic footage brought into FCP6 had that as a preset from the moment I installed the program and was asked to choose my project settings..... and once you explained to me how to look for this, I then sought to match it on the Avid end, and changed the EXPORT settings on the Avid files to that codec.
So both sources medias match now in FCP6. They also play now without stutter.
But they both do have those lines. Albeit, faint, but I'm concerned about them now.
So I think this definitely has to do with my Final Cut Audio/Video settings:
My Sequence Preset is: DVCPRO HD - 1080p24
My Capture Preset is: 1080p24 48KHz
Should the Sequence Preset be changed to p30?
And if so... will I then have to recapture all the Panasonic footage back in? (I'd lose all my log notes and shot names).
Or, can I just delete the two timelines, change the sequence setting, and then redrag them back in?
Thanks for all your help, Kyle.

How to reduce the swf file size of an imported After Effects file

Hi!
I am trying to make a web banner for an internet marketing company, so it has very specific requirements. We had it made in After Effects, and I was able to export it as a FLV file and import to Flash just fine along with the SWF. Now, I need to make the SWF file significantly smaller.
Right now it is 2.5 MB and we can only submit a 40K size SWF. Is it even possible to reduce the size so much and still keep the animation's intregrity?
I am more familiar with Flash than After Effects, but can play around with settings, etc if someone can tell me what to try.
Thank you for your help!

the easiest way to load and play your flv is to use an flvplayback component. you just drag it from the component panel to the stage and, in the properties panel, assign its properties (eg, skin and source).
but that will probably put you just over your 40kb limit and will require the skin.swf to be placed on the server with your banner ad.
to decrease your swf size to negligible, use actionscript to play your flv. this is the barebones code needed. just replace your_video_url.flv:
var nc:NetConnection = new NetConnection();
nc.connect(null);
ns:NetStream = new NetStreamnc);
ns.play("your_video_url.flv");
var video:Video = new Video();
video.attachNetStream(ns);
addChild(video);

Cannot Import After Effects Composition into Premiere CS5.5.

So here's my issue:
I made an After Effects Project and I'm using Dynamic Link to bring it over into Premiere. My project, and all of its compositions are fine. But, I recently created a new composition and created my animation on it or whatever. Now, when I go to import it to Premiere, its not there. I've saved, I've tried precomposing, and it lets me import other compositions from that very same After Effects Project. I've saved it, I've closed and reopened both premiere and after effects, I've restarted my computer. And please, oh please. Don't tell me I need to reinstall all of my programs. I get that answer all too often.
Extra Details:
I noticed that my composition (inside After Effects) is open and editable at the bottom of the screen. But, in the "bin area" or whatever it's called, my composition isn't listed there after I created it and did all this work and I believe Dynamic Link is using that list to import the project over to Premiere. So how would I get it to show up on that list?

Not sure what you are saying. If there is no comp in the project window (or "bin area" in your words), it doesn't exist - short of perhaps having hidden in one of the folders there. Clarify what exactly you are doing. Also screenshots of your respecive windows and import dialogs might help (attach them using the camera icon). And finally, do provide some system info, what footage types you use, comp settings, sequence settings in Premiere and so on. The weirdest things can influence this stuff from some bad comp naming to hard technical issues anything is possible.
Mylenium

Help- Importing DV movie file into FCP how do I change my FCP settings

I am importing 5 different dv movie files that are approx 114.1mb each into Final Cut Pro. I opened a new project.. imported the files. Now I want to start putting together my sequence, but I need to change some settings, and I don't know where to start.
When I go to insert the portion of one of the files into the sequence I get a popup saying
"Attention- This clip does not match the sequence's settings or any of your sequence presets.
For best performance your sequence and External Video should be set to the format of the clips you are editing.
Change sequence settings to match the clip settings?"
(No) (Yes)
I obviously need to select yes.. but then i'm not sure what to choose after that.
Could someone guide me please?
Thank you

They are .dv (person who sent them to me used imovie to upload their video they shot)
So I need to open them in compressor and find the preset to convert them to dv quicktimes.
Once they are dv quicktimes and I import them into my new project. Should I be good to go?
Sorry for the novice questions... I do appreciate your help.

Problems importing/transfering existing files into Itunes

I can import cds into itunes no problem but can not import existing files on my harddrive both video and audio. all are in reqired format. when i highlight them in the add file function and click open nothing happens. if i try to drag and drop them i get a black circle with a line through it.
any help greatly apreciated.
Phillips Iqon Windows XP AMD64 3200 1024RAM

I am having the same exact problem with a program called Apollo Ipod Converter. It worked yesterday but not today. Not sure if it's a problem with the video file or with Itunes.

Problems importing After Effects files into FCP

Similar Messages

Maybe you are looking for