Problems importing audio files in FCP 7.0.1

Has anyone else noticed FCP 7 being much more picky about audio files being imported? MP3s, WAVs & AIFFs that all play on my system or in Quicktime are not being recognized by FCP. The only pattern I can see to these files is they were not created on Macs and may lack certain metadata that FCP expects, but generally, I work under the assumption that if Quicktime can read a file, FCP can too - and that is proving not to be the case.

Thanks for the tip re: JPG v TIFF. And I've done a MP3 -> AIFF conversion now as well.
As it turned out, my problem was not a FCP preferences corruption, but was a matter of where the files came from...we were given a DVD with the still & audio files on them. When I copied those files from the DVD to our Server and then to the Raid hooked up to our Mac, the files would not import. If I went directly from the DVD to the raid, the files imported. Not sure how to make sense of that...but good to be aware of it, and hopefully if anyone else runs into this odd occurrence, this solves it for them...

Similar Messages

Can't import audio files in FCP after snow leopard update

i've recently updated to snow leopard. and i'm running Final Cut Pro 6.0.6
i opened a .fcp project i created a long time ago. i tried to import a .aif file and final cut crashes. i converted the .aif file to a .mp3 file. tried to import it, and final cut crashed.
i then went and deleted the preference files for final cut pro, reopened final cut, tried importing both files again, it still crashes.
does anyone have a legitimate answer for why this is happening?

BenB wrote:
1st, FCP does not officially support MP3 audio files, so don't even use them. I'm running FCP 7 on Snow Leopard, no problems with audio files.
1- How are you encoding them? What software is creating these files?
2- Are you running on an external FW800 drive?
3- How much RAM are you running?
And as my final observation is, NEVER run Final Cut Pro 6 on Snow Leopard! Huge no-no! If you upgrade to Snow Leopard, only use FCS3. I've updated lots of systems for my students and clients, and I've seen lots of FCP6 on SL problems.
Message was edited by: BenB
I agree that you shouldn't use MP3 files with FCP, the manual tells you that somewhere If I recall properly, but it shouldn't cause Final Cut to crash, at least that has never been my experience, it has just caused a skipping problem, or not playing the complete song.
I don't really understand wht a FW800 drive or the amount of RAM have to do with it, it would sure be interesting to hear your comments on that.
However, in all due respect, to make the statement that one should NEVER run Final Cut Pro 6 on Snow Leopard seems pretty "out there" would you be so kind as to provide your rationale for such a drastic statement as that. Has there been anything official from Apple along those lines?

Having Problems importing XML file from FCP 6 onto a FCP 5 application

I have a project file that i worked on FCP 6 and wanted to move to FCP 5 app. on a different Pro Mac but when i try to import the xml, it prompts me to "Please choose a Translation Document File". I choose the FCP 6 project file because i wasn't sure what to choose and i get the ERROR: No translation templates matching the selected XML file were found. Unable to import this file.
any ideas?

make sure you exported your XML from FCP6 using a compatible XML version (1, 2 or 3) ... version 3 would make the most sense as its the most recent FCP5 compatible version .... don't export using version 4 (the default for FCP6), that one is for transfering projects between different installations of FCP6 only

Imported audio files are repeating same audio on objects in a slide

Hi
I can't find anything here that mentions the problem I am having.
I am using Captivate 4. And Neospeechs desktop VoiceText program to record audio files outside of Captivate. They are saved as WAV files, then I import the audio into Captivate.
I have various objects on a slide. For example, I have six text Rollover Captions. When you roll over them, some text is displayed. I have attached my audio files to these rollover objects. So, I would have audio1.wav, audio2.wav, audio3.wav etc and these play when you roll over the captions.
The issue I am having, is that when I Publish or Preview the project, sometimes the wrong audio file is playing upon rollover. Usually the first couple of caption/file combinations will work, so I get audio1.wav for caption1 and audio2.wav for caption2, but then say for captions 3,4,5,6 I am still getting audio1.wav playing!
I have doubled checked everything and the correct audio files are attached to the captions. And they all play correctly in Edit view.
I've just noticed this has happened again in a different Captivate 4 project, where I have about 6 lines of Text Animation, with an audio file for each text animation. They have been distributed across the timeline so that the text animations do not overlap, and yet I am still hearing imported audio files repeated.
If anyone can help to shed any light on this, i'd be grateful, as I'm totally stumped!
thanks
Lolly

Have you got the correct selection buttons at the bottom left of the Files panel enabled under Sort by:?

The audio file is not recognized by Logic. Can't import audio files?

Hi,
The audio files are on my desktop. Logic 9.1.1 will not recognize them and gives me this message when I try to drag and drop OR Import Audio File OR use Audio Bin.
As far as I know, I am using wave files (extension .wav). So what could be the problem. Here's a picture of how the files look on my desktop.
The regular silver and blue iTunes icons look like this when I Get Info:
The black iTunes icons look like this when I Get Info:
Importantly, the black iTunes (only 2 out of the 18 audio files) are the ones that actually import. Does it have something to do with the fact that it shows under "More Info > Audio Channels 1" vs. the silver and blue iTunes .wav files (which do NOT have this)?
Furthermore, here is the process I used to get the audio files in the first place. On my PC, I exported audio files from my Ableton Live project onto a thumbdrive. I copied the audio files from my thumbdrive to my Mac. Maybe this had something to do with it.
Also, as you can see, under Sharing and Permissions > there is only "read and write" for all names, so it's not a permissions thing.
Thanks.

Thanks for your reply.
+Can you play them as Preview (select in Finder, hit spacebar)?+ No. The black iTunes icons play with no sound and the silver and blue iTunes icons do not even come up in Preview at all.
+Will iTunes play them?+ Only the black iTunes files (2 out of the 18). When I click on a silver and blue icon'd file, it will not even open in iTunes.
why on the desktop? it was just a temporary thing. I was not able to pull them into my Audio Bin. I tried what you suggested. I put the files in the Audio Files folder of my project. When I go to open them from within Logic by Import Audio File, they are visible but greyed out. I don't use the desktop except for testing stuff like you do.
+How was the thumb drive formatted? FAT32 or other DOS-format, or Mac OS Extended (HFS)?
+the extension is not where apps look to recognize an audio file format, it is the header data. Some audio programs can read RAW audio files, but more about that after your reply to this one.+ It is formatted MS-DOS (FAT 32).
(*I wrote all this stuff above while I was working and waiting for the PC to write to my thumbdrive again*******finally I got everything to show up.
I loaded the files again from the thumbdrive. This time they were all in the black iTunes format, and I put them directly in the Audio Files folder like you suggested. After some doing everything works fine. Weird.
Thanks!

Im having problems importing prores files at correct frame rate

im having problems importing prores files at correct frame rate. they have been converted to prores at 25fps but on importing they appear in fcp as 30fps. any help would be appreciated.

I don't know anything about Wondershare. But it seems something may have got messed up in the conversion. Or maybe there is an identifier on the converted clip that has FCP confused and it really is 25 fps.
To begin, your sequence settings don't match your clips. You want a Pro Res sequence. Let FCP set this automatically by dragging a Pro Res to an empty sequence and when gives you a message asking whether you want the sequence to match the clips, click yes. Then hit command 0 again and see whether the frame rate is set at 30 or 25.
If it really is 30, then it will need to be converted and re-imported. It can be done in Compressor or in Cinema Tools. If you have used Cinema Tools before, great. Of not, I'll defer to others because it's been a while and I don't want to mess you up.
Good luck.
Russ

Importing Motion Files to FCP

I've searched for this problem and have yet to find a thread with a conclusion - please point me in the right direction if I've missed it.
I'm running Motion 3.0.2 and FC Pro 6.0.6 along with OS 10.4.11. I'm due to upgrade all these asap - but as I'm in the middle of a long project I'm holding back. I've never been able to import Motion files into FCP either by using Import or dragging into the browser - I get a "File Error: Unknown File" message. Instead I make a QT file and work on that. Usually I don't have many files in a sequence so that's never really ben a problem.
However, I've now putting together some much longer sequences and it's a pain when shots need tweaking to have to re-make QTs each time.
I've trashed both Motion and FCP preferences without luck. I have Snow Leopard sitting waiting to be installed. Could that fix the problem? Does anyone have any suggestions?
Thanks in advance.
Andy

hi,
seem to remember someone else having this problem, have you repair permissions etc on your system. Can you double click a motion file for it to open from the Finder. Does the Finder know they are Motion files and should be opened by Motion? er can't think of anything else
adam

Captivate 2 Vista unable to import audio files

Hi
I have had an audio problem with Captivate 2 and Vista -
There is a hot fix to enable recording which works.I did that
... . but I am unable to import audio files.. even those that came
with Captivate 2 in the gallery give me the same error message..
unable to decode & import wav/mp3 file.
Does anyone have a solution!! Need to do a demo next week!!
thanks
phil

Hi Phil
I don't suppose using Captivate on Windows XP is an option
for you? This would seem to be a Vista related issue. Captivate 2
may work to an extent on Vista, but it would appear this may be one
of the "gotchas" one may encounter when using it in this
environment.
The good news is that Captivate 3 was announced today and
will work on Vista. I know this doesn't help you immediately, but
will provide an answer before too long.
Cheers... Rick

Automator Action "Import Audio Files" error message

I use this automator action daily when it is activated via an alarm time in iCal. It is the 3rd workflow run in a series of 7 worlflows to create audio files while I'm at work (I record XM programming for use later on my iPod). Since I upgraded to OSX Lion yesterday, I'm getting a new error message I've never seen and I can't find any info on it. Can anyone help? The error message in a popup dialogue box is:
The action “Import Audio Files” encountered an error.
Check the actionʼs properties and try running the workflow again.
Under the Log for the workflow I get this message:
The operation couldn't be completed. (OSStatus error -1712.) (-1712)
The imported audio file does actually get inputted into iTunes and converted properly via iTunes, but the error creates two problems. One is the source file isn't deleted after the action runs (which is a checkbox option in that particular action). This isn't a big deal, because I can create another workflow seperately to delete the file, so I'm not as concerned with that. The major problem is that the error dialoge box displays and the sebsequent workflows that are scheduled to run right after this one can't run becasue Automator is occupied with the error message.
I'm looking for any advice I can find, I've been using this series of workflows for a long time without issue, but seems like everytime there is a new OS I have to go through the geriatrics of figuring out what slight changes apple made to the Automator actions.
Thanks for reading,
Chris

Hi,
I just solved the problem pretty easily: earlier, on Snow Leopard, automator had to be set to work in 32bit instead of 64bit otherwise there has been a lot of error messages.
I tried to do the same with iTunes on Lion and, oh miracle, it works:
close iTunes then go to Applications -> right click on iTunes -> read informations -> check the box to run the app in 32bits and restart iTunes and .... that's it.
I work in a local radio in Belgium and I rely on automator on an everyday basis to download then add prerecorded broadcasts to iTunes to be aired with Lion server and I was stuck since a few weeks because of that problem. Now I can finally work again :-)
English is not my native language so please forgive me for my mistakes ... :-)
Apple RULES (but you already know that )

Importing Audio Files From CD

New to Logic Express 9
I tried this for the first time last night and had some trouble. A bass track imported...looked like a bass instrument but sounded like an overhead drum mic??? I just clicked "Import Audio Files" and went directly to the CD. These were wav files so I'm thinking it is a coversion issues. Checked the file with Itunes and it's definitely a bass track. What's the best way to accomplish this import?
Thanks

It's becoming obvious that the program has become corrupted in some way. I have a session that I closed in good shape only to find the next time I opened it that all the sends were activated and even after turning all the sends off I'm still getting bleed from two or three tracks in a single track.
In this current session I tried muting the problem bass track and dragging it again from the audio bin into another track. This time it's got sax on it although visually the wav looks the same as the original bass track.
I guess I'll have to call Apple Care...jeeze!
Message was edited by: Rusty K

Not able to import .motn files into FCP

For some reason I'm not able to import .motn files into FCP. While in FCP, I use "send to motion" and uncheck the embed box. After motion opens and I add my motion content, I get the following error when trying to import the .motn file back into FCP "File Error: 1 files(s) recognized, 0 access denied, 1 unknown". What is strange is that I'm able to create another test FCP project with different media, and everything works fine. All tests and media are done on the same drive.
I'm using the latest updates of everything FCP 5.0.4 and motion 2.0.1
Any ideas anybody?
Thanks!
G5 Mac OS X (10.4.6)

Check the frame rate - that can sometimes interfere...
Patrick

Problems importing .mov file

I am all of a sudden having problems importing .mov files from my camera in iPhoto '08. Can't get them to import in Image Capture either...On the import preview screen, all that comes up are empty "boxes". If I highlight one of the boxes, it shows that it is .mov file, the size of the file, etc. but if i try to do the import, iPhoto just locks up.

iPhoto does not like very large movie files for importing directly from the camera. If you get it on the desktop you should be able to import it. I've imported 200MB movies with no problem.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Problems importing raw files into Lightroom 3.4

I've just dowloaded lightroom 3.4 and now I'm having problems importing raw files into lightroom. I havent had a problem before. Can anyone help me? My camera is a Nikon D7000.

Perhaps a few more details are required. Take a look at the FAQ "How to get help quickly"

Have AE7; Problem importing prproj file into pc; get placeholder instead. What do I need to do to open up the video files here. They are .mov in quicktime.

Have AE7; Problem importing prproj file into pc; get placeholder instead. What do I need to do to open up the video files here. They are .mov in quicktime.

Please be more specific. What Premiere project? What version of Premiere? Which operating system? What CoDecs do the QT fiels use? Are all the video files in the correct folders inside the Premiere project structure? Your description sounds like you are attempting to open a Mac based project on a PC and your video files are either in the wrong location or use a Mac-specific CoDec, hence they cannot be read on a PC.
Mylenium

If I actually import full files into FCP, can I then drop source files into the trash?

If I actually import full files into FCP, can I then drop source files into the trash? I'm editing now and want to free up HD space.

Just to confirm: in Preferences, Import, Files..."copy to library storage location" is selected.
So I assume I can dispose of source files.
Thanks for quick reply and also the the cautionary note.
This is low-level family footage I export to .mov and share on YouTube, so originals are not critical.

Problems importing audio files in FCP 7.0.1

Similar Messages

Maybe you are looking for