Problems importing h264 in AME CC

Hello and sorry for my bad english. I have a problem with AME CC. I'm running the latest update. The problem is this : i have some h264 renders from Premiere CC, today i have to encode some low res versions from that files, so i've opened them in AME. With a big surprise....files are green. I mean...no video,only a dark green screen. Scrubbed the preview and... green screen. I have tried to open different files type such as mov,avi,mpeg2,mpeg2 dvd and AME works well. I have not tested an h264 encode from AME. What i mean is encode an h264 from AME and import it again.
My system is totally rebuild, so i have a fresh CC apps installation.On my system i have only CC Apps and a Matrox Mxo2 Mini Max. No other sw installed. In other sw the original h264 from Premiere works well (Prelude and Premiere). They are not encoded in Matrox h264, but as standard HD 720 25p from Premiere.
My system:
Asus P6TD Deluxe
Intel i7980x
24GB ram
2 x SSD Intel DCS 3500 (System 240GB, AE Cache 120GB)
Asus GTX680 4GB
MXO2 MiniMax
Win 7 Pro SP1
CC Apps:
Premiere Pro
AE
Prelude
Speedgrade
AME
Bridge
Photoshop
Illustrator
Any help will be appreciated.
Best regards,
Roberto

Ok,i've made other tests and everything works well. h264 encoded from Premiere are seen by AME. So....i don't know why only three files (they are old and encoded before the system rebuild) show the green screen problem. I don't want to investigate more since everything works very well. I apologize for the incovenience and look forward for the October update!
Bests,
Roberto

Similar Messages

  • Problem importing into AE CS6

    Hello. I have a problem importing some footage into AE CS6. It was filmed with a Canon XA10 in PF30. My primary computer is a Windows 7 based system with plenty of RAM and a i7 processor. While Premiere Pro can import this footage and allows me to edited, the problem starts when I try to import it into AE CS6. I have the cloud and AE should be up to date with its updates. When I try to import the footage I get an error that states "After Effects warning: Error with file" I also use an Mac with Mountain Lion (at a different location) and it has no problems importing this footage into AE CS6 and allowing me to edit it. Here are the errors that I receive
    The top image is the error that I get.
    The next image is source information I get when it is imported into Media Converter.
    The bottom left image is the import screen from AE. I circled the only difference that I noticed.
    The bottom right image is some footage that AE does not have any problems with.
    I have searched the internet and someone suggested that I convert the footage to another codec like MOV. I have done this many time using different codecs (mov, h264, avi, etc) and I have converted these files on the Mac as well.. All of those files come up with the same error in AE as well as nothing in the format location in the AE import screen. I am thinking that my Windows system maybe missing a codec that is installed on the Apple. Can anyone tell me if I am missing a codec? If so can anyone tell me where I can get this codec. Any help would be great as I have been woking on this problem for a while now.

    You can drag the comps from the project window in AE to the project window in Premiere Pro. This won't work if you happen to have installed the applications individually instead of as part of Production Premium or another suite or products, but as long as you installed them together, you can drag and drop between the applications all you want.

  • Problem Importing Footage into AE CS5.5

    I'm having problems importanting 'avi' video from my Vado HD into AE CS5.5 - the videos playback just fine in Windows Media Player but when imported into After Effects the clip is greyed out & only the audio track is available. I can't understand the problem as the codec must be installed for the Media Player to play the files & I have checked this by loading the footage into GSpot with this result: Codec H264. Name H.264/MPEG-4 AVC. Installed. Really hope some one can help me with this.

    Thank you for all your help Mylenium.
    I'd already tried MPEGStreamclip with no joy - loads the footage in much the same as AE does [greyed box] & couldn't figure a successful way to convert it.
    I was baffled by the wall of text relating to ffmpeg & couldn't figure out how to install/run it let alone convert any footage.
    SUPER©  was the golden nugget - not much trouble to install & find enough reference online to successfully convert my footage - many thanks.

  • Sync and frame rate problems importing video to Flash CS3

    Just like the subject states, I am indeed having frame rate problems importing video to Flash CS3.
    When I export a video from Premiere with the settings:
    1280x720
    frame rate of 23.976
    using H264 or Animation (basically every codec produces the same results),
    "embed video on SWF and play in timeline"
    When I do this the file exports fine. Playing it in Quicktime works fine and the audio syncs up no problem. But when I import it into Flash using the same settings, for some reason the movie clip is now too fast in that the video does not match the audio and seems to be at more like 12 fps now (just a guestimate). The action of the video is over long before the audio even comes in.I have verified that the frame rate is correct in Flash so it's not that.
    I've done this literally hundreds of times in the past and suddenly it does not work and I can not figure out why. I'm not even really using video, but actually artwork that I am putting together as an animatic for an animated piece so the video could not have been imported incorrectly or digitized wrong either. Can someone out there please tell me how to make this work? Any help would be GREATLY appreciated!
    -Mike

    Thanks for you quick response however it really doesn't apply to what I am doing in any way. I will not be uploading the video to a server. I am using the imbed function so I can use it as a layer and then animate over it. It is just reference and will ultimately be deleted. The Fla file does indeed carry the same specs as I stated in my first post. I have done it this way dozens of times and I am trying to figure out why it suddenly will not work.
    ~Mike

  • I am having problems importing from a DVD or a CD to my Ipod nano via windows 8.  I initially set everything up on a computer with windows 7, and authorized the windows 8 computer as well.  Howevre, the oly thing that comes up on windows 8 is my purchases

    I am having problems importing to my Ipod nano via windows 8.  I usually do this from a windows 7 computer and have had no problems; hoever in windows 8 I can only see items purchased in the Itunes store.  I do not have access to my entire library, which includes song uploaded from CDs and some videos.  As a result, I'm having problems uploading any new items from CDs or DVDs.  The computer with windows 8 is an authorized computer, so I don't understand why I'm having the problem.

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • Problem importing from JVC MG 155 (videcam with hard disk drive)

    I had a problem importing video from my videocam Jvc MG 155.
    I tried when there was only few record in the videocam and everything gone right.
    Otried when there were 520 movies and over 4 hour of video (I went to holiday and made also underwater movies) and the program crach before importing the movies.
    I can import the moviesw only via firewire but in this way i import in DV mode (so I have near 60 gigabytes occupied by that movies insted of the original size in the hdd of the camera of 18 giga).
    Someone have a solution?
    If I import by firewire I reach the same quality (the camera record directly in mpeg 2 and via firewire I import in dv way)?
    Any idea?
    Jvc don't support mac because they don't give you software compatible (the cd inside is win only).

    You are right.
    But the first time I imported with imovie 08 (the time when there was only few movies on the camera and everything gone right and the program don't crash) i notice that the program imported the movies in compress format (mpeg2) and the size was the same of the videocamera (more or less ..but I'm sure it's not in DV format).
    Maybe the prgram crash because of the hight number of the miniature it must generate to let me choose witch I want import.
    Certantly Apple mus resolve this bug because the model of this videocamera is one of the fews they assure like compatible directly with imovie 08.

  • Problems importing connections from a SAN directory

    Is anybody having a problem importing connections from a directory that's on a SAN?
    My network is setup so that the Application Data directory is out on a SAN and when SQL Developer opens up the file dialog, current directory is listed as C:\ and entry in the file name field is file://<server>/<path to my stuff>/Application Data/SQL Developer/. This looks fine but when I click on the "Open" button to get the directory listing, an error dialog pops up with the following message:
    The directory C:\file:\<server>\<path to my stuff>\Application Data\SQL Developer is not accessible. Please select a different directory.
    When I change the current directory to the drive that maps the SAN location, I get the same message only with C: replaced with another drive letter.
    If I had to guess, the dialog is not processing the file:// protocol indicator properly before it attempts to get the directory listing. Does anyone have a work around?

    Other users also had problems with network shares, so you're right that might very well be the cause of your problems.
    As workaround, try mapping the settings folder to a local drive. Add this to \sqldeveloper\bin\sqldeveloper.conf:
    AddVMOption -Dide.user.dir=C:\sqldeveloperHope that helps,
    K.

  • Problems importing videos recorded from my iPhone 3GS to iPhoto

    I am having problems importing any videos recorded from my iPhone 3GS onto iPhoto. iPhoto keep giving me the following error:
    "Error downloading Image. iPhoto cannot import your photos because there was a problem downloading an image."
    If anyone else is having the same problem, please advise on how to fix.
    Thanks,

    I am having the same problem...
    and Image Capture ( didn't know we would normally be able to use it, but you can) also give an error
    "Import Error"
    Now I have used "ITimelapse pro" to transfer some timelapse movies (about 3 that are about 30 to 60 seconds long) that I made to the phone's photo library.. and I has a very long video that I mistakenly made - (15 minutes long or so) and I "trimmed" it to be a few minutes long. -- and used "JotNot" to send a photo to the photo library... otherwise I have only some regular photos (about 40 ) and about 2 regular videos in the library.
    so any suggestions... ( I am emailing all that I can to myself ... maybe ridding everything will help)

  • STMS problem ( import status - import runnig does not change)

    I have the same problem like this:
    While Transporting request in our production server the status of request from import running (truck sign) does not change.
    But the effect of the request is seen in the production but status does not change.
    see :Re: STMS problem ( import status - import runnig does not change)
    I did se14 as experts suggested, the history truck sign go away,seem work fine,
    but when new request need STMS to trans, the truck sign happened again,
    I need you help,thank you!

    thanks for all reply,
    the last two answers are the same,I think this is the right key,
    I'm a ABAPer actually,yesterday I asked our headquarters  basis to help,
    and I don't know what he did,now this problem is be solved,
    PS:I use AL11 to find .LOB now,but not find(maybe it's deleted by our basis),
    thanks again!

  • New problem importing photos videos

    since I upgraded my iphone 5 to ios7, I having a problem importing photos and videos to my pc? I have Windows 7. Has anyone else had this issue and been able to resolve it?

    Hi I have figured it out on my own just today coz what apple suggested didn't help much so I just have to do it by myself.
    This is what you need to do:
    open your computer and search for autoplay, it will open rightaway and then scroll down look for your device then change "ask everything" to "import photos and videos in windows" connect your ipad again then tthe import box will open.. and your good!
    i hope this will help you. Good luck! :-)

  • Problems importing sound

    I'm trying to import .aiff (22.050  24bit) into the Director Cast, but Director (12) keeps crashing while importing them. I intially did a batch import, but am now importing them one at a time - a couple have imported, but I'm having to force quit Director and try re-importing several times before I can import a file. Has anyone else had problems importing sound into Director 12?

    24 and 32 bit audio are not supported. Try 16 bit:
    http://helpx.adobe.com/director/using/publishing-ios-devices-using-director.html

  • Problems importing from sony HDR FX7

    hi forum.
    i'm having problems importing audio from my camera into i-movie.
    during import there is no sound coming from my computer, but there is sound coming from my camera. after import when i play back the clip i just imported, the sound is morphed. its like the pitch has been turned down in the audio file, except no effect has been done on it.
    if anyone out there has a similar problem, or a soulution please let me know as i am ready to throw my mac out the window!
    john lawlor

    OK i think i get what you are saying but....
    will the cound correct itself while it in in imovie. in other words will i be able to edit and listen to the audio as it is supposed to be?
    what concerns me it that after i noticed this probem, i tried exporting it as a quicktime file, thinking that the wound would be OK, but after it finished exporting, the quicktime file was exactly the same. the sound was morpehd on it also.
    could it be the settings on my camera?
    john lawlor

  • Problems importing AVCHD clips from Panasonic GF1

    I'm having problems importing clips from my new Panasonic Gf1. FCE (4.0.1) sees the device ok, and selecting and previewing the clips in the log and transfer window works fine, but once the clips are in FCE (converted to AIC) they play fast in the viewer or when placed in the sequence. Strange, because they play fine in the preview window before importing. Tried this in iMovie 08 and get the same effect.
    I'm can convert them Toast to AIC and they work fine when imported to FCE but this is not my preferred workflow.

    I tried using Toast Titanium 10 for conversion as suggested but there was a slight issue with synch of video and audio. So I downloaded and bought Voltaic HD as suggested elsewhere and the AVCHD files of the Panasonic GF-1 are now playing in Final Cut Express 4 without issues - I am editing with no problem. Given that I can use the Log&Transfer Window (Final Cut 4) for my Olympus EP1 and my Panasonic HD video cam, it's odd that the files of the Panasonic GF-1 don't work in Final Cut (yet), but at least I am back editing. Voltaic HD was $35, a doable expense.... it does work flawless (so far).

  • Problems importing and playing songs from an external cd/dvd drive

    I am having problems importing songs on my PC from an external usb drive. What I have is an external combo usb firewire drive hooked up to my pc with a usb cable. (usb 2.0) When I launch itunes, it sees the cd I have loaded but when I go to import the songs, itunes just pops past each song in a second like each song was just a second in length. Then I have some corrupt file in my itunes library. Itunes gets the cd names and titles from CDDB correctly but can't play the songs or import them. I use this pc solely for playing audio, it is a Pentium 4 2.6 with 1GB of ram with build in usb 2.0 on the motherboard. There is no other software installed on the system other then virus software. When I use Windows Media Player the cd is read perfectly fine. I even play DVDs off the drive with no problems too. This problem in intermittent, with different cds. These are all commercial cds not burnt ones that someone made for me. Any help or suggestions would be appreciated.

    Hi Toonz - I have exactly the same problem when trying to import songs - itunes does recognise the cd drive and names of tracks etc - it just won't play more than one second of each, or import any more. i did run the cd diagnostic check you suggested - results below - don't mean anything to me i'm afraid - any bright ideas?
    this was a christmas present and i haven't managed to put any new music on apart from what was already on our pc, so am v sad and hope you can make it better....
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    ASUSTeK Computer INC. A7N8X2.0
    iTunes 6.0.0.18
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: RADEON 9500\RADEON 9500
    IDE\DiskMaxtor6Y120P0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomATAPICD-RW_52XMax______________________150D___, Bus Type ATA, Bus Address [1,0]
    IDE\CdRomSONYDVD-ROM_DDU1612____________________DYS1___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SONY DVD-ROM DDU1612, Rev DYS1
    Drive is empty.
    E: ATAPI CD-RW 52XMax, Rev 150D
    Audio CD in drive.
    Found 14 songs on CD, playing time 65:08 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 00:17:42
    Track 3, start time 04:59:28
    Track 4, start time 12:35:43
    Track 5, start time 16:11:73
    Track 6, start time 22:46:73
    Track 7, start time 28:23:27
    Track 8, start time 32:37:70
    Track 9, start time 37:46:01
    Track 10, start time 42:35:14
    Track 11, start time 46:22:32
    Track 12, start time 50:29:14
    Track 13, start time 55:20:60
    Track 14, start time 60:46:54
    Audio CD reading failed. Error Code: 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12 16 20 24 32 40 48 52.
    The drive CDRW speeds are: 4.

  • Problems importing with iPhoto 5

    I am having problems importing photos from my Sony DSC-T1 camera.
    The import process is very inconsistent. With the first attempt at importing maybe 50% of the images have horizontal lines with color shifts. I will delete the bad imports and start the import process again.This time, of the original bad imports, maybe a third of those will import correctly. The rest will take another two or three import attempts before they import cleanly. In addition new photos will show up between imports that weren't there in the original import.
    Help! Whats going on? Does anyone have any ideas?
    Thanks
    PowerBook G4 1.67 Ghz   Mac OS X (10.4.3)  

    Hi mhdubi,
    I just read this article and even though your camera is not listed as one of the ones affected, it could still be your problem.
    http://www.consumerreports.org/cro/electronics-computers/chip-problem-with-some- digital-cameras-and-camcorders-1105.htm
    Lori

Maybe you are looking for