Problems importing with LR 1.3 - Problems finding a location?

When I try to import photos from my camera LR pops up a message saying it's having a problem finding a location to put the imports. Then when I try to import again, it goes without a problem. Has anyone else experienced this?
thanks,
Geoff

Geoff-
Can you give the exact message, what you then do? Also, type of image, platform, set up (internal, external drives, room on drive, RAM)

Similar Messages

I'm have problems Importing with the Adobe Premiere Pro (original version upgrade

Hi all. I’m having a similar problem that I've seen posted on here but I have Adobe Premiere Pro (the first version upgrade.) I upgraded it from Premiere 5.0. Every time I try to import some Mpeg files to edit, it freezes up and crashes. I’m wondering if someone could help me. My computer specs are below:
(1) Mini-Tower mATX Chassis w/300W PS 865G Motherboard
(1) Windows XP Professional Edition with Service Pack 2
(1) Intel Pentium 4 Processor 3.2 GHz 512K 800FSB w/ HT
(1) DDR333 PC2700 Non-ECC Memory sticks (512MB x 2 and two one gigs)
(1) 120GB Ultra ATA (7200rpm) Hard Drive
(1) GeForce 4 Ti4200-8x 128MB AGP Card w/ TV-Out
Thanks,
Peter
[email protected]

Thank you Eddy. I appreciate all the help and feedback I get from the website.
Also, someone suggested I convert the Mpegs to AVI files first. What do you know about AVS Video Remaker download to use to convert it???
Thanks and Regards,
Peter Adija
Office: (704) 631-5418
Cell: (704) 315-4946
Date: Mon, 8 Jun 2009 15:20:10 -0600
From: [email protected]
To: [email protected]
Subject: I'm have problems Importing with the Adobe Premiere Pro (original version upgrade
Welcome to the forums.
Thanks for providing some of your hardware details.
Please provide http://ppro.wikia.com/wiki/Troubleshooting to help us help you.
Cheers
Eddie
>

Problems importing with iPhoto 5

I am having problems importing photos from my Sony DSC-T1 camera.
The import process is very inconsistent. With the first attempt at importing maybe 50% of the images have horizontal lines with color shifts. I will delete the bad imports and start the import process again.This time, of the original bad imports, maybe a third of those will import correctly. The rest will take another two or three import attempts before they import cleanly. In addition new photos will show up between imports that weren't there in the original import.
Help! Whats going on? Does anyone have any ideas?
Thanks
PowerBook G4 1.67 Ghz Mac OS X (10.4.3)

Hi mhdubi,
I just read this article and even though your camera is not listed as one of the ones affected, it could still be your problem.
http://www.consumerreports.org/cro/electronics-computers/chip-problem-with-some- digital-cameras-and-camcorders-1105.htm
Lori

Problem Importing with Sony Handycam DCR HC30

Here's the problem...I can't import my video footage to Imovie HD 06 via firewire. I have a HC30, and a HC32 and neither will import to my computer. They both used to import about a year ago, but won't anymore. My dad's camera (a HC21) will import with no problem, so I know it's not the cable or firewire port on the computer.
What is going on here? I need help with this before i loose my mind!!!

hi, did you get this resolved? I'm in what sounds like the same situation, which is desperate now. I am trying to import from a Sony Handycam - DCR-HC37 mini DV cam into my Macbook Pro with iMovie HD 06.
I plugged it into a friend's new Macbook 2 weeks ago and it worked fine, but then last week when I tried it in his Macbook again it wouldn't work.
It worked fine on my Macbook Pro with iMovie - about 8 months ago, but now it won't show up in iMovie, no matter how many times I disconnect it - reconnect it, restart camera, restart laptop. I have to show some footage at one of the most respect art institutions in England next week, and if I don't get this footage I've been collecting over the last 2 months off my Handycam I am going to be in deep trouble!!!
I really hope that someone can make sense of this problem, I've seen lots of people posting similar problems, but I don't know if this has a resolve or not.

Emails in my Inbox (both "Read" and "Unread") are all displayed in BOLD type - cannot tell the difference. Problem began with Firefox update. Problem does not occur with Internet Explorer.

Problem occurs with several different e-mail accounts. GoDaddy e-mail, aol, Yahoo mail

Hi,
this can be related to the compression of the PDF file.
You can turn off the FlateDecode compression again via report RSTXPDF3 as described in Note #843480. It is a little confusing. The option 'FLATE_COMPR_OFF' needs to be set to 'On' to turn off the FlateDecode compression.
To set this please run as follows:
se38 -> RSTXPDF3 -> enter 'FLATE_COMPR_OFF' in the 'Name' field -> Select 'Change Settings' radio button
You will get a pop-up 'Do not use flat compression'.
Select the 'on' button.
After this check if the PDF is created correctly.
regards,
Aidan

Problem importing with sony cam

I've tried importing from a sony HDR-HC9 mini hdv tape without any luck , my cam is on power cable , the firewire plug in then i open imovie and then i click on import from camera , i get the blue screen that says importing but nothing is recording . i am sure one of you guys had this problem sooo what am i doing wrong ?
thanks for your time

Hi
See if You find any help in my list.
*NO CAMERA or A/D-box*
Cable
• Sure that You use the FireWire - USB will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
Yours Bengt W

Problem importing with Canopus 110

I have a problem with my newly bought Canopus 110.
When I import analog video into Imovie5, the audio is not on the clips. i can hear it ok through the computer's speakers when I am importing, but then when i play back the clips, they are without sound. I have checked if there is any box to tick or untick, but i did not find anything.
Please help
Thanks
Coppelius

http://www.danslagle.com/mac/iMovie/audio/1000.shtml

Problem importing with Panasonic GS-120

I am using a 17" iMac G5 along with a Panasonic GS-120 and up until yesterday, I have not had any problems. Now, iMovie or any of the other apps (Yahoo IM, iChat, Delicious Library) that were able to use the camcorder no longer function. When I go into the system profiler, the camera is not located, but it does take about 30 secs for the Mac to figure it out. If I open any app that can use the camcorder, I get the spinning beach ball and I have to force quit the app. If I turn off the camcorder, everything works.
I have tried two different firewire cables to rule out a cable problem, no luck. I was able to use it just fine on my PC, so I am pretty sure that it is not the camcorder. Does this indicate that I have a firewire issue? I followed Apple's suggestion of unplugging everything and waiting 3-5 minutes before restarting. That did not help. I have no other firewire devices or hubs connected, so I do not know what else to try.
Any suggestions?

Hi Figan,
here's a long list from Apple of suggestions:
http://docs.info.apple.com/article.html?artnum=43000
and another one :
http://docs.info.apple.com/article.html?artnum=88338
what would be my first step:
unplug your Mac from powerline.
not just "switching off", no, really physically disconnect from powerline for 10 - 15min..... it sometimes "resets" the firewire-ports of the Mac....

Problem importing with internal drive, but external drive works

Hi,
I was importing a CD in iTunes and this one track refused to import, noises sounded like it couldnt read it, and i had cleaned it multiple times. Plugged in an external USB CD drive, and it worked straight away.
Why is this?
Thanks!
J

I received a new hard drive and an enclosure today. However, when I plugged the new hard drive into the computer's internal SATA slot, the computer did not recognize that new hard drive. When I connected the new hard drive to the computer externally through the enclosure, the computer recognized it. Moreover, the computer also recognized my old hard drive when I connected it externally through the enclosure. So it seems that my problem does not reside in the hard drive, but in the SATA cable.
I wonder if there might be any probable reason other than bad cable? I am still able to install OS X to both the hard drive if I connect them externally.
Thanks in advance!

Problem Importing with Channel setting in Auto mode

I had the impression that if I chose the "auto" mode on channel selection under Edit-Preferences-Burning - Custom, then Itunes could tell if the recording was mono or stereo and upload accordingly thus saving space for mono recordings. But with "auto" all of my uploads are in stereo - only when I change the setting to Mono will Itunes upload a mono recordng as mono. Was I wrong in my assumption of the Auto setting or is something wrong - I am usung the latest version of Itunes 7 Thanks in advance for any help Jay

Also, I am not using a multi-channel output, only built-in output (stereo). Still, does not seem to work.
Another test -- opened file in Soundtrack Pro. I see the four channels, though they are grouped in some way that I cannot separate at present. I save the file as aiff, and this time Logic will open it, though it seems somehow corrupted, won't play.

HT1688 My Hot Spot does not work after update to 6.0.1. Service is with ATT. Apple says problem is with ATT, ATT says problem is with Apple. Anyone else having this problem?

My Hot Spot does not work after update to 6.0.1. Any suggestions?

Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

My Mac was upgraded to Snow Leopard. iMovie now have problems importing from SONY camcorder.

This is the first time I hooked up my camcorder since the upgrade. iMovies shows my videocan with an excalamation mark inside a yellow diamond and bogs down completely. What is wrong? I have iLife 2011. Is there a setting that I missed?

{quote}Has anyone else had problems importing with this specific model or a related model and if so were you able to fix the problem or find a work around? I guess I could transfer the old Sony movies to my new Canon GL2 and then import into the iMac but that kind of defeats the purpose as I have been repeatedly told how simple and intuitive it is to do things on the iMac.{quote}
I don't have the Sony, but for older tape camcorder's I use a standard DVD recorder and burn the movie to DVD then use [HandBrake|http://www.versiontracker.com/dyn/moreinfo/macosx/21117] to convert to MPEG-4 for importing to iMovie.
Dennis

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

The "gig" is not up. IMHO the problem is with software, not hardware

There very well could be a few iPhones that have hardware problems but my opinion / findings say it is sofrtware rather than hardware.
Case in point. I have owned my iPod Touch (32 GB) for over 6 months now and have had no problems with it until I installed 2.0 software. The problem got even worse on the Touch when I upgraded to 2.0.1. The problem was freezing up which required a special rest proceedure and a complete restore. I had the same problem with not one but two iPhone 3G's (I returned the first one). Same scenario. Speical reset and complete restore solved the problem. I have now had no problems except for a little instability (such as slow keyboard from time to time) for the past 4 days. Bear in mind this is on BOTH the iPOd Touch AND the iPhone 3G. ONe would think that if the problem was with hardware that the problem would not be with both the iPhone 3G AND the iPOd Touch.
Would love to hear the opinions of others.
Ken

If your question is "Is the 2.0/2.01 software buggier/slower/flakier than the 1.0/1.1/etc. software for iPhone/iPod Touch", then the answer is of course SMS typing slows down on occasion now, weird pauses, freezes etc. are all new to 2.0/2.01.
This doesn't mean that the iPhone 3G hardware isn't possibly flawed as well-that still hasn't been answered. But its pretty common knowledge (I think) that 2.0/2.01 is much less stable than the 1.0 OS. (on the flip side, look at all the new stuff we get to play with in 2.0/2.01 )

6.0.2 freezes when importing with canon 5d

Hi, I'm using The latest version of Iphoto 6.0.2 with an intel Mini. The computer locks up every time i try to import photos from my 5d. It always freezes about half way through the import. I've used different memory cards, a card reader, and even hooked it up to the USB port, it doesn't matter, it still freezes. The latest thing i tried was to delete the album.xml file and restart. That didn't do it either. The weird thing is that I have zero problems importing with my 20D. I can get around the problem by copying the photos to my Dell laptop, put them on a USB memory stick and then import them into iphoto with success. Any ideas? I have a feeling it has something to do with the canon software that i installed and then removed because i didn't like it. Could it be a conflict between i photo and the canon software? How do I make sure I remove all the canon crap?

Foxfile:
I don't think it's due top the software unless it's operating on the files as you import. Are you shooting RAW and the accompanying jpg? I've had zero experience with RAW but try the following:
1 - create a new, fresh library and then see if you can import into it. If not then it's an account issue. If the new library works then it's
2 - log into another account and see if the photos will work there. If so then it's your primary account that is having trouble.
Also check some of the options in the camera about file types, compatibility, etc. There may be something in there that can be changed so make them work. I'm guessing since I don't have a camera that shoots raw.

Problems importing with LR 1.3 - Problems finding a location?

Similar Messages

Maybe you are looking for