Problems importing

When importing my RAW & JPEG files from my camera, LR 3 is not recognizing all of the JPEG files that are attached to the RAW files. This starting happening about 2 months ago. Before this, I had no problems. I import them as separate files. The import will begin and when LR tells me it's done, I have to turn off my camera, turn it back on and import again. It then is recognizing that there are additional files/JPEGS that it didn't download. I generally have to do this 3 or 4 times for each full download. Any suggestions as to why this is happening?
~Kimberly

Kimberly, is this a Canon camera? You appear to be d/loading straight from the camera?? I would suggest getting a quality card reader (lexar, Sandisk, etc) to use as d/loading direct from cameras seems to be a common source of problems. Try d/loading via a card reader and see if you still have the problem.

Similar Messages

I am having problems importing from a DVD or a CD to my Ipod nano via windows 8. I initially set everything up on a computer with windows 7, and authorized the windows 8 computer as well. Howevre, the oly thing that comes up on windows 8 is my purchases

I am having problems importing to my Ipod nano via windows 8. I usually do this from a windows 7 computer and have had no problems; hoever in windows 8 I can only see items purchased in the Itunes store. I do not have access to my entire library, which includes song uploaded from CDs and some videos. As a result, I'm having problems uploading any new items from CDs or DVDs. The computer with windows 8 is an authorized computer, so I don't understand why I'm having the problem.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Problem importing from JVC MG 155 (videcam with hard disk drive)

I had a problem importing video from my videocam Jvc MG 155.
I tried when there was only few record in the videocam and everything gone right.
Otried when there were 520 movies and over 4 hour of video (I went to holiday and made also underwater movies) and the program crach before importing the movies.
I can import the moviesw only via firewire but in this way i import in DV mode (so I have near 60 gigabytes occupied by that movies insted of the original size in the hdd of the camera of 18 giga).
Someone have a solution?
If I import by firewire I reach the same quality (the camera record directly in mpeg 2 and via firewire I import in dv way)?
Any idea?
Jvc don't support mac because they don't give you software compatible (the cd inside is win only).

You are right.
But the first time I imported with imovie 08 (the time when there was only few movies on the camera and everything gone right and the program don't crash) i notice that the program imported the movies in compress format (mpeg2) and the size was the same of the videocamera (more or less ..but I'm sure it's not in DV format).
Maybe the prgram crash because of the hight number of the miniature it must generate to let me choose witch I want import.
Certantly Apple mus resolve this bug because the model of this videocamera is one of the fews they assure like compatible directly with imovie 08.

Problems importing connections from a SAN directory

Is anybody having a problem importing connections from a directory that's on a SAN?
My network is setup so that the Application Data directory is out on a SAN and when SQL Developer opens up the file dialog, current directory is listed as C:\ and entry in the file name field is file://<server>/<path to my stuff>/Application Data/SQL Developer/. This looks fine but when I click on the "Open" button to get the directory listing, an error dialog pops up with the following message:
The directory C:\file:\<server>\<path to my stuff>\Application Data\SQL Developer is not accessible. Please select a different directory.
When I change the current directory to the drive that maps the SAN location, I get the same message only with C: replaced with another drive letter.
If I had to guess, the dialog is not processing the file:// protocol indicator properly before it attempts to get the directory listing. Does anyone have a work around?

Other users also had problems with network shares, so you're right that might very well be the cause of your problems.
As workaround, try mapping the settings folder to a local drive. Add this to \sqldeveloper\bin\sqldeveloper.conf:
AddVMOption -Dide.user.dir=C:\sqldeveloperHope that helps,
K.

Problems importing videos recorded from my iPhone 3GS to iPhoto

I am having problems importing any videos recorded from my iPhone 3GS onto iPhoto. iPhoto keep giving me the following error:
"Error downloading Image. iPhoto cannot import your photos because there was a problem downloading an image."
If anyone else is having the same problem, please advise on how to fix.
Thanks,

I am having the same problem...
and Image Capture ( didn't know we would normally be able to use it, but you can) also give an error
"Import Error"
Now I have used "ITimelapse pro" to transfer some timelapse movies (about 3 that are about 30 to 60 seconds long) that I made to the phone's photo library.. and I has a very long video that I mistakenly made - (15 minutes long or so) and I "trimmed" it to be a few minutes long. -- and used "JotNot" to send a photo to the photo library... otherwise I have only some regular photos (about 40 ) and about 2 regular videos in the library.
so any suggestions... ( I am emailing all that I can to myself ... maybe ridding everything will help)

STMS problem ( import status - import runnig does not change)

I have the same problem like this:
While Transporting request in our production server the status of request from import running (truck sign) does not change.
But the effect of the request is seen in the production but status does not change.
see :Re: STMS problem ( import status - import runnig does not change)
I did se14 as experts suggested, the history truck sign go away,seem work fine,
but when new request need STMS to trans, the truck sign happened again,
I need you help,thank you!

thanks for all reply,
the last two answers are the same,I think this is the right key,
I'm a ABAPer actually,yesterday I asked our headquarters basis to help,
and I don't know what he did,now this problem is be solved,
PS:I use AL11 to find .LOB now,but not find(maybe it's deleted by our basis),
thanks again!

New problem importing photos videos

since I upgraded my iphone 5 to ios7, I having a problem importing photos and videos to my pc? I have Windows 7. Has anyone else had this issue and been able to resolve it?

Hi I have figured it out on my own just today coz what apple suggested didn't help much so I just have to do it by myself.
This is what you need to do:
open your computer and search for autoplay, it will open rightaway and then scroll down look for your device then change "ask everything" to "import photos and videos in windows" connect your ipad again then tthe import box will open.. and your good!
i hope this will help you. Good luck! :-)

Problems importing sound

I'm trying to import .aiff (22.050 24bit) into the Director Cast, but Director (12) keeps crashing while importing them. I intially did a batch import, but am now importing them one at a time - a couple have imported, but I'm having to force quit Director and try re-importing several times before I can import a file. Has anyone else had problems importing sound into Director 12?

24 and 32 bit audio are not supported. Try 16 bit:
http://helpx.adobe.com/director/using/publishing-ios-devices-using-director.html

Problems importing from sony HDR FX7

hi forum.
i'm having problems importing audio from my camera into i-movie.
during import there is no sound coming from my computer, but there is sound coming from my camera. after import when i play back the clip i just imported, the sound is morphed. its like the pitch has been turned down in the audio file, except no effect has been done on it.
if anyone out there has a similar problem, or a soulution please let me know as i am ready to throw my mac out the window!
john lawlor

OK i think i get what you are saying but....
will the cound correct itself while it in in imovie. in other words will i be able to edit and listen to the audio as it is supposed to be?
what concerns me it that after i noticed this probem, i tried exporting it as a quicktime file, thinking that the wound would be OK, but after it finished exporting, the quicktime file was exactly the same. the sound was morpehd on it also.
could it be the settings on my camera?
john lawlor

Problems importing AVCHD clips from Panasonic GF1

I'm having problems importing clips from my new Panasonic Gf1. FCE (4.0.1) sees the device ok, and selecting and previewing the clips in the log and transfer window works fine, but once the clips are in FCE (converted to AIC) they play fast in the viewer or when placed in the sequence. Strange, because they play fine in the preview window before importing. Tried this in iMovie 08 and get the same effect.
I'm can convert them Toast to AIC and they work fine when imported to FCE but this is not my preferred workflow.

I tried using Toast Titanium 10 for conversion as suggested but there was a slight issue with synch of video and audio. So I downloaded and bought Voltaic HD as suggested elsewhere and the AVCHD files of the Panasonic GF-1 are now playing in Final Cut Express 4 without issues - I am editing with no problem. Given that I can use the Log&Transfer Window (Final Cut 4) for my Olympus EP1 and my Panasonic HD video cam, it's odd that the files of the Panasonic GF-1 don't work in Final Cut (yet), but at least I am back editing. Voltaic HD was $35, a doable expense.... it does work flawless (so far).

Problems importing and playing songs from an external cd/dvd drive

I am having problems importing songs on my PC from an external usb drive. What I have is an external combo usb firewire drive hooked up to my pc with a usb cable. (usb 2.0) When I launch itunes, it sees the cd I have loaded but when I go to import the songs, itunes just pops past each song in a second like each song was just a second in length. Then I have some corrupt file in my itunes library. Itunes gets the cd names and titles from CDDB correctly but can't play the songs or import them. I use this pc solely for playing audio, it is a Pentium 4 2.6 with 1GB of ram with build in usb 2.0 on the motherboard. There is no other software installed on the system other then virus software. When I use Windows Media Player the cd is read perfectly fine. I even play DVDs off the drive with no problems too. This problem in intermittent, with different cds. These are all commercial cds not burnt ones that someone made for me. Any help or suggestions would be appreciated.

Hi Toonz - I have exactly the same problem when trying to import songs - itunes does recognise the cd drive and names of tracks etc - it just won't play more than one second of each, or import any more. i did run the cd diagnostic check you suggested - results below - don't mean anything to me i'm afraid - any bright ideas?
this was a christmas present and i haven't managed to put any new music on apart from what was already on our pc, so am v sad and hope you can make it better....
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
ASUSTeK Computer INC. A7N8X2.0
iTunes 6.0.0.18
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: RADEON 9500\RADEON 9500
IDE\DiskMaxtor6Y120P0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
IDE\CdRomATAPICD-RW_52XMax______________________150D___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomSONYDVD-ROM_DDU1612____________________DYS1___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY DVD-ROM DDU1612, Rev DYS1
Drive is empty.
E: ATAPI CD-RW 52XMax, Rev 150D
Audio CD in drive.
Found 14 songs on CD, playing time 65:08 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 00:17:42
Track 3, start time 04:59:28
Track 4, start time 12:35:43
Track 5, start time 16:11:73
Track 6, start time 22:46:73
Track 7, start time 28:23:27
Track 8, start time 32:37:70
Track 9, start time 37:46:01
Track 10, start time 42:35:14
Track 11, start time 46:22:32
Track 12, start time 50:29:14
Track 13, start time 55:20:60
Track 14, start time 60:46:54
Audio CD reading failed. Error Code: 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16 20 24 32 40 48 52.
The drive CDRW speeds are: 4.

Problems importing with iPhoto 5

I am having problems importing photos from my Sony DSC-T1 camera.
The import process is very inconsistent. With the first attempt at importing maybe 50% of the images have horizontal lines with color shifts. I will delete the bad imports and start the import process again.This time, of the original bad imports, maybe a third of those will import correctly. The rest will take another two or three import attempts before they import cleanly. In addition new photos will show up between imports that weren't there in the original import.
Help! Whats going on? Does anyone have any ideas?
Thanks
PowerBook G4 1.67 Ghz Mac OS X (10.4.3)

Hi mhdubi,
I just read this article and even though your camera is not listed as one of the ones affected, it could still be your problem.
http://www.consumerreports.org/cro/electronics-computers/chip-problem-with-some- digital-cameras-and-camcorders-1105.htm
Lori

Problems importing from camera - hardware related?

I am having problems importing from my new Olympus EP-1 through USB. Aperture hangs, iPhoto does not recognize the camera and Image Capture does not complete the task. The only way of retrieving the photos is through Finder.
I have tried importing the same photos to my wife's MacBook using iPhoto, and that went smoothly.
How likely is it that this is a hardware issue? And how can I find out? I haven't had any problems with my USB ports.

Try using image capture in your applications folder
Also if the camera mounts to the desktop try getting the photos that way
once you have them off use the camera to format the memory card (it is recommended that you use a USB card reader and do not use iPhoto to delete photos but format the card each time after the download is complete)
LN

Problems importing AVI with DV codec to Premiere Pro

Problems importing AVI with DV codec to Premiere Pro (720x564 px, 32 kHz stereo, 24.4 bitrate)
I can't import that video. What can I do?

Svanur,
I agree with Harm. The specs. do not match up correctly. Where did those AVI files come from?
I assume that you are working in PAL-land (and not NTSC-land). Is that correct?
What platform are you working on, Mac, or PC?
When you attempt to Import those AVI files, what is the exact error message that you are getting?
Good luck,
Hunt

Problems Importing into Address Book

Trying to import my address book from a vcf file. I get the following error:
Are you sure you want to add 1511 cards to your address book? There were problems importing.
My address book file has 2308 cards, not 1511.
Any suggestion

If you open Address Book, click on Card menuitem and select Edit Template. This will show you what the current template is and what fields may be added to the template.
You can then edit the LDIF file when it's created to select only the desired export fields that will match the template.
I believe when you then import into Address Book you will have an opportunity to match up the corresponding fields. Been so long since I did this I don't remember.

Problems importing Thunderbird Mailbox into Mail

I am having problems importing my Thunderbird mailboxes into Mail. I won't go into the many problems and issues I had to solve (but there were many) but would ask if anyone can help me solve the one I still have.
In Mail I used the Import Mailboxes command, located the Thunderbird profile in my Home directory and imported it. I may have done this some time ago, but in any case, when I decided to start using Mail as my main email client this week I only had emails up until 6th November 2008.
Now I find it impossible to import the rest of my Thunderbird Inbox - only the sub-folders show up and Mail does not let me import the emails in the main inbox.
How can I get the remaining emails?

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
Envelope Index
ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

Problems importing

Similar Messages

Maybe you are looking for