Problems in 5.5 video w audio going into audio 5 slot.

I'm working in Premiere 5.5 and it says my files are damaged that worked on in Premiere 6 on another computer. Do I need to upgrade to 6 to use these files?
Also, When working in 5.5 I drag my video into "video 1" and it puts my audio in "audio 5" I'm guessing because it seems incompatible. why would this be? I can't get it to move it move audio 1. I tried overwriting by holding down shift key when dragging clip but wont work.
again do I just need to upgrade to 6?

Audio tracks are Mono or Stereo specific.

Similar Messages

  • In Safari 8, I have problems moving my bookmark folders without it going into another folder. I cannot organize them in any manner?

    In Safari 8, I have problems moving my bookmark folders without it going into another folder. I cannot organize them in any manner?

    Keeping the folder you are moving to the far left will do the trick.

  • Facing problems with network due which the phone goes into hangs status

    Facing problems with network due which the phone goes into hangs status.  some one help me with switching between 2g and 3G network

    Hi Mani Nair,
    I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are talking about having issues with a 3G cellular data network, you may find the troubleshooting steps outlined in the following article helpful:
    iPhone cellular data connection issues
    Regards,
    - Brenden

  • My iphone 4 has a SIM card and lately is saying that it is not installed when it is, and it has a small light in the screen where the card goes into the slot, why is this happening?

    my iphone 4 has a SIM card and lately is saying that it is not installed when it is, and it has a small light in the screen where the card goes into the slot, why is this happening?

    Hi cosmoph1,
    If you are having issues with your iPhone not recognizing the installed SIM, you may find the following article helpful:
    iPhone: Troubleshooting No SIM
    http://support.apple.com/kb/ts4148
    Regards,
    - Brenden

  • How do I upload an audio book into audio books instead of into my itunes music library?

    How do I upload an audio book onto my ipod nano into audio books, rather than it going into my itunes music library?

    iPod Manuals
    iPod Models
    iPod nano Troubleshooting Assistant
    iPod Troubleshooting Assistant
    Service Answer Center - iPod

  • How do I make the audio go to audio track 6?

    I know this is going to be easy, but I've spent two hours and can't figure it out. I'm another one of those guys coming over from FCP.
    I'm editing a short. Most of the video tracks have 5 audio tracks. I put a clip on video 1 and then the audio automatically goes into audio 1-5. Great.
    Then a I put a clip on video 2 and the audio goes on tracks 2-6, oeverwriting the other audio. I would like it to go on audio tracks 6-10.
    The only way I have found to do this is to first lock all the audio on tracks 1-5, but that is time consuming ... locking, unlocking, locking.
    I've tried moving the V and A1 "flags" on the far left (which is what my FCP brain would expect to be the solution) but as far as I can tell, that doesn't do anything.
    Any help would be greatly appreciated.
    t

    Swinker,
    I did not see which version of PrPro you are using. That can be important, as there was a change in Audio Tracks between CS 5.5 (and earlier), and CS 6. For CS 6, there are some good AdobeTV tutorials, that cover how those changes will affect things, regarding Audio. At the end of this article, there are a few links on how Audio works in CS 6: http://forums.adobe.com/message/3757977#3757977 If you have CS 6, disregard much of the material in the first part of the article, and most will no longer apply with CS 6.
    Good luck, and it appears that you have the info needed.
    Hunt

  • My iPad freezes wen going into iTunes

    I seem to have a problem with my iPad it freezes wen going into iTunes or the App Store

    What have you tried to fix it ? Have you tried closing the two store apps via the iPad's multitasking bar and seeing if they work properly when you re-open them, logging out and back into your account via Settings > iTunes & App Store, tried a soft-reset of the iPad ?

  • Creating seperate audio input and audio output tracks?

    I need a bit of advice on how to do this. I'm using a simple Lightsnake USB cable to hook my guitar directly into my computer, now i can record into the program but need to switch between the Unknown USB input and the built-in inputs to get sound. This has made monitoring tracks impossible and is pretty frustrating, any help would be appreciated.

    Hi Dennis
    Logic Express seems to like a single source in and out, however you can get around this by going into Audio Midi Setup (Applications -> Utilities -> Audio Midi Setup) and creating an aggregate device with which you can choose separate input and output devices. Then, simply choose the aggregate device as your audio driver when you're back in Logic.
    P.S. I assume this is still valid for LE8 as I havent got my copy yet
    Good luck and may the force be with you
    Sam

  • When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

    When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect  earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

    Hi Ganeshpandianm,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371?viewlocale=en_US
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Cheers,
    - Judy

  • Video playback stops while audio goes on

    After several month of not making any movies, I am trying a new project. Right of the start something is wrong, freshly imported unedited line of clips is not being played correctly in iMovie preview window - video stops in about 30sec or so, while audio goes on. If I switch to full screen, it gives me another 10sec of video, then it stops there, too, and nothing brings frozen video back to life. After restarting the app, everything repeats.
    Needless to say it's impossible to edit.
    It also does it with the older projects, which used to work just fine.
    Here is what I've done so far:
    1. Repaired permissions on startup disk and checked it for errors.
    2. Repaired external disk, where the project resides (even tried to move the project to internal disk with no avail - same results), and where I have 80GB of free space.
    3. Replaced external disk's directory, using DiskWarrior.
    4. Deleted iMovie preferences file.
    5. Removed all third-party plug-ins I had.
    Nothing works.
    QuickTime Player seems to play imported clips fine, so I am guessing, it's an iMovie bug. Any practical suggestions would be highly aprecciated (by practical I mean, not "reformat your hard drive and reinstall everything" or "buy a faster computer" or "invest in FinalCut instead")
    I've been a loyal iLife user since the very beginning, and I swear, iMovie in it's buginnes is only challenged by iDVD.

    It is a common problem for G4 800 machines and I've been told Apple is investigating the issue.
    Try putting your Mac to "sleep" for a minute and then try the file again.

  • During editing on MacBook Pro 2.2GHz i7, audio goes out of sinc with video

    I have been having a lot of trouble with audio going out of sinc after I have edited a 30 minute program.  When I make a second cut, I find that the audio has jumped under the first cut about half an inch back, and this happens with every progressive cut.  Then after "sharing" to dvd the audio is out of sinc with video throughout.  I then have moved each one of these overlaps back into position and still have a problem with audio out of sinc.
    HELP.

    I was using a different laptop for post since the macbook was busy "sharing" to dvd, which, since I closely examined each cut at highest magnification to fix them ended up making video watchable.  Not every cut came out of sinc, but several do.
    It is both sides of the cut which come out of sinc, the right side laps over the left and then I noticed when I corrected them with greater magnification that the left side was moved left to cause a gap.  I guess I just have to closely examine each cut when done with the whole video since also these overlaps are caused when I zoom out to view the whole length of the timeline, most of the cuts will overlap at that moment.  Really strange.  I had trouble fixing these but less trouble whe I turned off the snap in option.

  • Audio going 10x faster than video

    That is probably a pretty horrible title, and it may be inaccurate.  I am using Adobe Premiere Elements 11, and I opened a 3minute and 12 second video and audio clip of me playing drums.  When I place it on the timeline, the audio in the audio track is all jumbled within the first 20 seconds.  When I play it, it sounds like the audio is going at a super high rate of speed. (i.e 10x faster, probably more, actually)  The video then continues to play for the remainder of it's duration, without any audio.  I'm not sure what other information you might need.  Any help would be appreciated.
    Oh yeah, I'm using an Acer laptop with Windows 7 64-bit,  a Dual core 2.2 GHz processor, 3gb RAM, 5400RPM 320gb hard drive.  I realize those specs are pretty weak, but I don't feel like that would be causing my problem, but who knows.
    Also, the file is a .mov file from a ZoomQ3HD.

    Master Lomaxus
    Could you please post the Tree version of the MediaInfo readout? To get at it you can click on the arrow at the end of the message at the middle right side of the readout that you posted? I am particularly interested in the audio codec and if it is twos. I have found that to be a very problematic audio codec in at least one instance where I had to deal with it with a user.
    Your video codec represented as AVC is probably H.264. And, it looks like the file has the .mov file extension. To me, the rest of those video properties appear atypical, that is, 848 x 480 16:9 @ 59.94 frames per second (probably progressive).
    As a consideration for your troubleshooting, I would offer a manually set Premiere Elements project preset of:
    NTSC
    AVCHD
    AVCHD 1080p60
    But before all that, you might want to read about my prior encounter with twos audio and decide if the issues in the following apply to your situation as well. If they do, you may want to check out my suggestion to the user in that case. (See Post 8 in the thread cited)
    http://www.elementsvillage.com/forums/showthread.php?t=77558
    I realize the brand of camera is not the same, but...
    If any questions about that thread or this matter, please ask me here in your thread.
    Thanks.
    ATR

  • I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

    Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

    I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
    iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
    However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
    To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
    However, I would also like to rent movie's from iTunes, 
    Would be great if iTunes would let you choose the output device, too, like most other applications using sound  from Skype to Windows Media Player,...

  • Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point my PC running XP loses all audio.

    Several attempts to upgrade to iTunes 11 have failed.  After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray.  Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
    I did that.  I reinstalled iTunes 10.5.  Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
    What might be the problem with my audio configuration?
    Why doesn't my iPhone 4S work with iTunes 10.5?  It used to work with iTunes 10.5.
    Please advise.
    ep

    This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
    Regards.

  • Is there a way to fade video to black and keep audio going?

    I'm using iMovie 09. What I'm attempting to do is have a long fade to black transition at the end of the project that will obscure the last couple of seconds of video, yet keep the audio going during the fade till it ends.
    To put it another way, I'm trying to ditch the last 2 or 3 seconds of picture, yet still keep the music that is going on underneath it.
    Is there a way to do that?

    Sorry, Karsten, I'm having trouble explaining this clearly. Here's what I'm attempting to do: I want to make a short example clip from a silent film to upload. Below is a link showing how this clip ends.
    The thing I want the viewer to see last is the boy and girl sitting on the bank, not the litter of pigs.
    However, I don't want to chop the music off to get rid of the pigs. So is there a way to fade the video to dark around :11 or so, and then have the music finish up in the dark a few seconds later?
    In other words, how do I get rid of the pigs without chopping the end of the music off?
    http://www.youtube.com/watch?v=g2MCg1Xr6Ak&feature=c4-overview&list=UU6VMWRQBNmt YHganJ-Nhw-g

Maybe you are looking for

  • MIRO: two invoices were posted with same Reference Number?

    Hi all! Using the MIRO user posted two invoices with the same Reference number without any warning. Is it normal? Invoices looks exactly identical, the only difference is "Specl G/L assgt" which one of them has and another doesn't. Regards.

  • Name showing on emails

    When I receive emails as part of a CC group on my mobile phone, my name on the CC section of the incoming/replying email is not showing up correctly. When I look at the very same email on my laptop, my name is correct - it shows there as "me", and wh

  • Issue in periodic jobs monitoring

    Hi Guys , i have created a program for monitoring periodic jobs. out of list of some 120 predefined periodic jobs if the job is not released (Status S in table TBTCO) then send a warning mail with details of the jobs. this program is set as a daily j

  • The Compass App won't allow True North anymore

    When my iPhone 4 had iOS 4 last month, I could select True North or Magnetic North in the Compass App. I'm on iOS 5 now, and am just now realizing that I can no longer switch to True North anymore in the Compass App because it is greyed out. Does thi

  • Plant address can't be changed?

    I go to  SPRO, enterprise structure/logistic general/Define, copy, delete, check plant, but I find the address field, house number, post code number are all greyed out, how to change the plant address, thanks?