Problems in ABAP Proxy Generation

Hi All,
I tried to generate an ABAP proxy for outbound message interface "Interface_ABC", which is under software component "DEF".
In our development system, I had successfully created ordinary function modules and structures under the package "/XYZ/UVW" using the prefix "/XYZ/".
When I began the proxy generation, the system asked me to specify the package and prefix. So I specified the package to be "/XYZ/UVW" and prefix to be "/XYZ/".
Then a warning window pops up. It reads "Package /XYZ/UVW does not belong to DEF". I clicked "OK". The "Create Proxy" screen shows up. Then I clicked the "Save" button. This time an error window pops up. It reads "Cannot extend package /XYZ/UVW". The action is thus cancelled by the system.
Does anybody know what is the reason for this problem and how to solve it?
Best Regards
Jerome

Please check the properties of the package in which you are tyring to save the PROXY.
In your case it looks like the property PACKAGE NOT EXTENDABLE is switched on. Once you uncheck you should be able to save the proxy in that package.
Regards,
Ravi
Note : Please reward points if you find the answer useful.

Similar Messages

Problem in ABAP Proxy generation

Hi,
I have generated a proxy in development systems. And moved to pre-production systems. By mistake, one of the proxy generated data types is not moved to pre-production. So, all the dependant data types are not generated in pre-production. Hence proxy is ended up with an errors.
Now, I am unable to understand how can I solve this problem.
Could you please help me out with few steps, so that my proxy gets successfully generated with all the data types in pre-production system.
Thanks for the help.
cheers
san

> Could you please help me out with few steps, so that my proxy gets successfully generated with all the data types in pre-production system.
I suppose that all your proxy objects are in the same package.
So you simply transport the whole package.
If you do not know how to transport, then ask your basic admins, they should be able to tell you.

ABAP Proxy generation terminated (WSDl choice element not supported)

Hello
Im trying to generate ABAP proxy from WSDL file (A valid XSD file has imported as External definitions in to XI Integration Repository and created Out bound Interface which gives WSDL file for Proxy generation in SPROXY).
Unfortunately one of the WSDL file element "<choice>" not supported by ABAP Proxy Generation. it gives the following error.
Proxy generation terminated: WSDL error (<choice> not supported)
Message no. SPRX038
Syntax of <choice> element code in WSDL file:
<xsd:choice minOccurs='1' maxOccurs='1'>
<xsd:element name='Employees' minOccurs='1' maxOccurs='1'>
</xsd:element>
</xsd:choice>
Can some one please help if already come across this kind of problem.
Please suggest me if there any alternate element for WSDL <choice>.
Regards
Rajesh

Hi Aamir
Thanks for your help...
I have gone through attached thread.
Does It means should i change <choice> element with any alternate element. If it is the case can u suggest me any alternate to <choice> element.
Can u pls tell what are all changes i need to do in WSDL file to support ABAP proxy generation.
Regards
Rajesh

ABAP Proxy Generation on Interfaces with GDTs

Hi all,
I created an aggregated data type with references to data types listed under the SAP GLOBAL SWCV within the namespace for the GDTs.
When I now try to generate an ABAP proxy in my backend system, I always get an error that these types cannot be generated because they have an other namespace.
Well, this message sounds logical for me, because this GDTs have to reside within an other (super) package(?), but how do I have to proceed with that?
From my point of view the GDTs delivered by SAP should already be generated within the ABAP Stack of the backend systems or they have to be automatically generated within a special package. When I try to generate it the system additionally wants to generate the GDT type references also with the custom prefix.
Does anyone have a good explaination on that?
Thanx
Olli

Hi Ollie.
Have you got a link to somewhere where they mention this component?
The problem I have with this is that there is business related content in the SAPGLOBAL SWCV. If you browse it you will see some Employee data types which relates to CRM systems. If you install this component on let say a SRM box what will it do with these "unrelated" business types.
Will these types be generatable?
Questions, questions...and finding answers is nearly impossible.
Anyway, what we did is to develop a Custom Common component which contains only datatypes. All other SWC's has this component as a dependancy. When we developed a new interface we would look for the datatypes in the SAPGLOBAL SWC (or the catalog) and copy it to the Common component.
We would then use the data types in the Common component to build the freeform data types in the other SWC's.
This way you still have only one place to maintain the global data types (in the common component).
Nice to share ideas.
Rod

Problem in ABAP proxy

hai all,
iam doing a abap proxy scenario in the following flow.
Flow: XI (Client 800) -
> XI (Client 001) ---> XI (Client 800)
now when iam trying to send the data from 800 client to 001 client
in 001 client sxmb_moni
it is giving one error
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">INTERFACE_REGISTRATION_ERROR</SAP:Code>
<SAP:P1>ifmmessif</SAP:P1>
<SAP:P2>mi_flietdata_OA</SAP:P2>
<SAP:P3>urn:proxytoproxy</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No implementing class registered for the interface (ABAP interface, request message mi_flietdata_OA, request message, namespace urn:proxytoproxy)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
can any one solve this problem.
regards,
Madhav Poosarla.

hai sumit,
i have generated proxy object as a local object,
previously i have created 4 levels of package
Structure Package(ZXI_PACKAGE)----
Level1
     Main Package(ZSCSLSAP)----
Level2
                    Sub Package(ZSIVA_SCSLCOMP)----
Level3
                   SubPackage   (ZSIVA_SCSLCOMP_PROXY2PROXY)--Level4
and i have added SAI_TOOLS to
ZSIVA_SCSLCOMP_PROXY2PROXY sub package,
at that time i have tried to add SAI_TOOLS to ZXI_PACKAGE but it was not allowed.
now i will create one more package hirachy and and i will try to execute again.
now i will delete my outbound proxy and will generate it again.
yes, mi_flietdata_OA is outbound interface.
thanks & regards,
Madhav Poosarla.

ABAP Proxy generation descrepencies with filed and method...

Hello,
I have two question regarding ABAP Proxies.
The first one when i regenerate proxy for a interface, It is not generating the same filed as before and my ABAP program fails.
I have Internal_organization_Descri -- Now, It is not giving same field rather It is giving Internal_organization_Descr
It is missing 'i'
One more problem is It is chaging method also
Previously it was showing "Sales_order_Sync"
Now, It is showing method as EXECUTE_SYNCHRONOUS
Why It is these proxies behave differently, is there Service Pack dependency.. What is the best way to avoid these descripencies...Pls help
Srinivas

Hi,
Please find the explantion about your doubts on ABAP Proxy.
1. The field names might be changed based on the changes in XI in Data type for this field.
Whenver you will be regenerating the ABAP Proxy, it considers the Message type and internally the Data types that have created in XI. So any changes in these objects may lead to change.
Verify your field names in XI
2. The Method to be used to call ABAP proxy is EXECUTE_SYNCHRON for Synchronous communciation and EXECUTE_ASYNCHRONOUS for async communication. These methods are used in ABAP source code. So please let me know where you had find this method "Sales_order_Sync"
The EXECUTE_SYNCHRON is the proper method.
Let me know if you need any more info.
Refer
ABAP Proxy outbound program - purchase order send
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
ABAP Proxy inbound program - sales order creation - Community Profiles - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
Thanks
Swarup

Date Format problem in ABAP Proxy

Hi All,
We have a Inbound ABAP proxy which recieves data from XI.
We use a date field in that which is defined as DATS datatype.
When we trigger the interface from XI with date in format YYYYMMDD, we are getting an exception.
when the date is sent in format YYYY-MM-DD, the interface is run successfuly.
when we test the interface in SPROXY transaction the date is displayed in YYYY-MM-DD format.
does it have anything to do with the defenition of the date format in XI?
I want to know whether DATS format in XI is different from ABAP?
should the date that is sent from XI be in YYYY-MM-DD format all the time.
Kindly suggest a solution for the date problem when it is passed from XI to ABAP proxy

Hi Uday,
Check the pattern used in XI/PI for the date definition.
If it's set to:
pattern="[0-9]-[0-9]-[0-9]"
Then it will enforce the pattern. You could try changing the pattern in XI to exclude the hyphen then you have a normal DATS format.
Regards, Trevor

ABAP Proxy Generation: SLDCheck works - Connection test does not

Hello,
for purpose of proxy generation we would like to connect a r/3 system (6.20) to our XI 3.0.
We have one central SLD. The R/3 is registered there as technical system. We have maintained RFCs LCRSAPRFC and SAPSLDAPI (also created the service on j2ee visal admin). Both work. In transaction sldapicust the connection data is maintained. In table sproxset the three entries for address, password and user are done.
In exchange profile everything seems to be configured well.
Using transaction SLDCHECK it shows everything allright (all points are green).
In transaction sproxy it shows only local data. Doing the connection test , it warns that only in sproxset the address is maintained. Obviously it has no connection to exchange profile but it doesnt even take the address maintained in sproxset which is the right one.
So did we forget some configuration.
Another strange thing is that if you select Goto->Integration Builder a complete false address is called. How can we change this address?
Maybe this has something to do with our connection problem.
Anyone with a hint?
Martin

Hi Werner,
In TC-SPROXY, when you click Goto->ConnnectioTest, it will display a list of checklist (4 points will be listed) for connecting to the Integration Builder. Does your configuration satisfy all of them?
The IntegrationBuilder (IB) address are stored in exchange profile parameters and sproxy will use it to connect to IB.
Thanks,
Sasi

Error in ABAP Proxy generation?

hai pals,
my intention is to push the data from XI to SAPBWSEM system throgh an ABAP PROXY.
       but , here i got an error which i already mentioned in the forum, that is " no connection to integration builder(only local data visible) ".
        i went to the integration engine configuration in "SXMB_ADM" transaction in SAPBWSEM server.
        in sxmb_adm transaction ,the system ask for the "specific configuration data-catagory" like TUNNING , MONITOR,RUNTIME,TRACELOG,DEBUG and RFCADAPTER.
         im little bit confused in choosing the "catagory of configuration data".so can u pls help me in this error.
with cheers.
rajesh

Did you create the RFC Destinations LCRSAPRFC and SAPSLDAPI to point your SLD ? If not do that.
Then create RFC Dest INTEGRATION_DIRECTORY_HMI type H. Look at your XI box and make these 3 RFC Dests.
Then use the following thread to fix your IFR_ADDRESS
Values for table SPROXSET
regards
SKM

Abap Proxy Generation (Outbound)

Hi All,
I trying to create the ABAP Proxy(OUTBOUND)
I have created the message interface in XI and created outbound proxy in R/3 by using SPROXY Tcode.
Created the ZProgram by calling class.
Please see this link
http://www.directupload.net/show/d/807/823PgPdG.jpg
what is wrong here ?
Regards,
Fth

they are only warnings, what happens if you go ahead activate and run the program?
Regards
Raja

ABAP Proxy Generation

Hi All,
I trying to create the ABAP Proxy(OUTBOUND)
I have created the message interface in XI and created outbound proxy in R/3 by using SPROXY Tcode.
Created the ZProgram by calling class.
and completed the Configuration steps in integration builder like (Receiver determination, Interface determination, Receiver Agreement and Receiver communication channel).
When I trying to execute Zprogram in R/3 it is giving "Proxy creation do not transport" and I did not see any message in SXMB_MONI in XI and R/3 too.
Is there any thing needs to be created in XI or R/3.
any help how to trace this..
Thanks
M

HEY MURALI,
In short : these are development steps for ur proxy :
1. generate the proxy based on a package of 4 layer strucutre.
2. After generating the proxy , activate it.
3. i will always test my proxy , at this level so that i can see its working and no issues w.rt. calling from z-program
4. i will now go and check the working of z-program and activate and execute it. you can also check if the earlier steps were successful , w.r.t debugging ur program.
5. Also check the settings/ configurations if anything missing.
Hope this helps
Vara
[PLEASE REWARD FOR POSTING]

ABAP Proxy generation from JAVA

Hi,
Is it possible to generate ABAP proxy classes from JAVA?
If possible then how do we call them during runtime from JAVA?
Here is what I am trying to do.
I have XSD ( Open Travel Standards schemas). I want to generate ABAP proxy classes for these XSDs.
So that I can call these ABAP proxy classes from JAVA during runtime. Real implementation of these methods will be implemented in ABAP.
Thanks,
Amara.

hi amara,
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/3e/e3fb40f17af66fe10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
let me know am i reach u r point
bvr

ABAP Proxy Generation -- Objects can be created only in SAP Package

Hi,
I am trying to generate ABAP Proxies. When i create a proxy for an interface(EMP_DETAILS_MI--outbound in my case), and assign it to package(created by developer), a pop comes up saying "Object can only be created in SAP package".
When i try to continue, it asks for an access key for that particular object.
Enter Key for the Object--R3TR-TABL-CO_EMP_DETAILS_MI When i register this object in servicemarketplace( by basis team) and get the license for this. It asks access key for another object R3TR-TABL-EMP_DETAILS_DT.
When i register this object it asks accesskey for
R3TR-TABL-EMP_DETAILS_DT_DETAILS
I fear if there is amy fault in my procedure. kindly let me know. I work on XI3.0 SP5 server.
Regards,
Siva Maranani.

Hi siva,
Iam in the same problem we want to create proxy in SAP namespace. Is there any workaround to create proxy in SAP namespace.
with Regards
shankar

Problem in ABAP Proxy(sometimes XML Messages are not being created)

Hi,
I am trying to send the data from ECC to CRM when post goods issue is done for a delivery from ECC side. I called my proxy method in BADI : DELIVERY_PUBLISH.
And after calling the method, I used commit work also.
But the problem is, some times it is working fine. and some times the XML messages are not getting created. When I go in debug, looks everything is fine.
I am unable to understand why this inconsistency.
Could you please help me out, do I need to take any more precautions.
Thanks,
Sandeep

You mean you can't find any message in SXMB_MONI of your ECC or is it XI where you can't see message?
If you have not checked in SXMB_MONI of ECC then may be messages are created but they are going into error and that's why you are not able to see any message in XI.

Problem with numeric types in Abap Proxy

Hello,
We are having problems with some abap proxy calls. When a numeric type is filled with 0 the node it´s automatically removed and no value it's recived in XI. The only way I have found to avoid this problem it's to define the field with type string or change the cardinality to 1..1 instead of 0..1. It's there any way to maintain the type and the cardinality?? Maybe with a pattern??
Regards,
Alberto Pla.

Hi Alberto
I had this problem, and I decided to use xsd:string instead of xsd:integer. This will solve the issue.
Anyway.. check this note:
[Note 1242795 - Mapping of XSD default values by ABAP Proxy Generation|https://service.sap.com/sap/support/notes/1242795]
Regards
Francesco

Problems in ABAP Proxy Generation

Similar Messages

Maybe you are looking for