Problems in activating the structure CI_Aufk for enhancemant CONFPP07 ?

Hi ,
I got a requirement for developing a screen exit for transaction co11n ( i used CONFPP07 exit ) so i have added four
field in the screen and added four field in EXIT_SAPLCORU_S_100 ---> CAUFVD -.> CAUFVTAB-> CI_AUFK . now
my problem is when i try to activate the structure ci_aufk , it runs for some 20 minutes and tels some program has
taken maximum time so it was forced to terminate.....can anyone tel what should i do now to activate this structure ?

issue not yey solved.

Similar Messages

Problem in activating the Hierarchy Datasource for 0CostElmnt

Hello Experts,
Can you please suggest, how to activate the standard hierarchy datasource -0costelement for mapping it to the respective hierarchy (0CostElement). For this I have replicated the datasource and activated using BI Content. But inspite of this, respective datasource is not getting activated in SAP BI.
So can anyone suggest me how to activate the datasource.
Thanks
PT

Hi PT,
Based on your SAP patch level & error message number, y need to apply SAP note to resolve this error. If you provide correct error message, so we can suggest. Try to active business content grouping the before & after words. Sometime dependent objects my missed also y may get inactive in Transfer rules.
Thanks & Regards,
Krishna.

Activation the Standard reports for SAP CRM IN BW 3.5 Version

hi guys
I am working on SAP BW 3.5 version
I have Activated the Satadard Reports for CRM Campaign, Lead, Opportunity in BW 3.5 Business Content
But I don't find the any single Standard Report in BEX.
I followed these Steps ;
BEX - Open - Queries - Info Area
If any One Knows please let me Know, Urgent Requirement
thanks in Advance
Suma

did u try to see that reports in metadata repository
login to bi system
enter RSA1
on the left panel select METADATA REPOSITORY
select LOCAL OBJECTS
then hit Query
TRY TO find ur REPORTS WITH TECHNICAL NAME
if it exists here than u shuld be able to seee in infocube.
if that doesnot make sense
go back to LOCAL OBJECTS SCREEN
hit INFOCUBE
locate ur infocube and select it
now everything with respect to infocube active and available is visible
all char catalog, keyfig catalog, queries etc....

I can not do the update , what should I do to fix this error ? "There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

I can not do the update , what should I do to fix this error ?
"There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

Hi,
Please refer to the help document below:
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena

I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because wh

I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because when I'm not at home I can't plug in the power.

hi,
I am sending file from server to client i.e client will request for a file and service will send it back....... no socket connection is there...I am using JBOSS and apache axis.
pls help me out.....
Rashi

HT204088 I subscribed with Al Jazeera sport channel via their app in the App Store ..but I faced a problem in activating the subscribed channel, I did contact them and they requested me to contact you in order to refund the payment .. How can I refund my

I subscribed with Al Jazeera sport channel via their app in the App Store ..but I faced a problem in activating the subscribed channel, I did contact them and they requested me to contact you in order to refund the payment .. How can I refund my money ???

Apple - Support - iOS Apps - Contact Support

Name of the structure needed for sales order user exit

Hi,
I am planning to write a user exit which will insert the data into my ztable the moment the new sales order is created and is saved.
I have identified FORM USEREXIT_SAVE_DOCUMENT as the necessary user exit. But the problem is that while inserting the data into the ztable I cannot insert the data from vbak as the data will be inserted into this table after the SO is saved.
Thus I need to identify a structure which is used to populate the vbak table so that it simultaneously inserts the data in the ztable as well. Can anyone help me with the name of the structure so that these fields i.e. vbeln, vkorg, vtweg, spart are inserted into my ztable?
Also need to know how to convert the net value i.e. vbak-netwr in Indian Rupees as it gets stored as Dollars ....
Thanks,
Vinod.

Hi,
One of the structure being used is RV45A, there are several other str's being used as well for various calculations,
check out program SAPMV45A for the same.
& in order to convert vbak-netwr to rupees use the below statemetnt,
WRITE vbak-netwr TO zvbak-netwr CURRENCY INR.
Regards,
Raghavendra
Message was edited by:
raghavendra ay

BI7.0 Hexdecimal values problem while activating the data in DSO

Hi Friends,
                 I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
Error when assigning SID: Action VAL_SID_CONVERT table
0DOC_HD_TXT
Value '1st disb' (hex. '00310073007400200064006900730062') of          characteristic 0DOC_HD_TXT contains invalid characters
Process 000037 returned with errors.
            it isn't accepting the values like with numberels and chars together
ex: 1st disb, 70 cr Gen Hsg.
               I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
Regards,
BalajiReddy

Hi Anil,
                   Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
                      Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
        pls tell me the reason, i'm really thankfull for your quick replay
Regards,
BalajiReddy

Problem in transporting the text elements for user exit EXIT_SAPLV09A_002

Hi All,
I am facing a problem in transporting the text element (text symbol) for the exit EXIT_SAPLV09A_002. It is implemented and transported but the text elements are not transported and even if I try to delete them and then create them again, on activation it doesn't prompts for TO and it version its shows it as local object. I have tried to manually assign the TO by using limu as id of program and rept as type and SAPLXV09 as the name of the object but still it doesn't allows as an error message comes prompting local object cannot be assigned to TO. Kindly suggest solution this problem.
Regards,
Sachin
Edited by: Sachin Dangayach on Nov 15, 2010 4:21 PM

Hello ,
In the Quality after you run the report check in the layout option>display text elements> variables and check what value is displayed for the use exit variable , if it is correct then problem may be in the selection you gave when you run the report if the user exit variable value is wrong , then set a break point in the code and run the report from rsrt and check where the error is.
hope it is clear
assign points if useful

Problem after activating the ECC 6.0 DIMP

I am getting the serious problem after doing the activation of this ECC 6.0 DIMP by installing some package.
What the problem is that the tables which are having the table class W are giving the problems.
Suppose whenever you are reterving data from this type of tables it is taking so much of time and finally a runtime error is coming showing TIME OUT.
Might be after installing that package we have to regenerate the tables. and how to do that i don;t know.
So all the tables which are having the table class W ,E and S are giving the problems.
For eg table DD02l this is the table for table fields and when i am making some changes in this table by using access key and after that if i have to make activate
it , it is going for short dump and similar cases are there for the tables of the condition type.
Please give me your helpful answers to solve this issue.
Thanks

Hi
From the command prompt following command i am executing
c:\dump\oracle\NT\IA64>sapserver.cmd
After executing the command Screen1 appears
Screen1
**********************************************************************************
Specify the drive letter of the local disk where
you want to install the oracle software
Local Disk Drive [C:]:D:
SID (consists of 3 alphanumeric characters,
starting with a letter (a...z)):D11
***********************************************************************************
After giving the parameter as shown in Screen1 the Screen2 will be popup and it stay for 2min and then close automatically and screen1 will come to normal prompt
Screen2
***********************************************************************************
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME1\ADMINI1\LOCALS~1\Temp\Orainstall2007-11-30_08-20-49PM. Please wait ...
*************************************************************************************
I cant found what is actual problem why OUI is not starting
Thanks and Regards,
Vishal Kalekar

Problem in designing the complex report for the client requirement

Post Author: venkateshvarakala
CA Forum: General
Hi,
I have problem in designing the report (Crystal Report 9.0) with multiple groups wih a sub report in each group with a a group header and footer with a
detail section in each report.
My requirement is as follows.1) Xxxx-sub reportwill have one header conetnt and footer content and detail ection in the middle grouped on one parameter2) Yyyyysub reportwill have one header conetnt and footer content and detail ection in the middle grouped on one parameter3) Zzzzzsub reportwill have one header conetnt and footer content and detail ection in the middle grouped on one parameter4)ABCdsub reportwill have one header one footer in group headers grouper on two prameters, My requirement demands customised detail section i.e.static conetent followed by detail section and a static conetnt(which should not repeat with child table records,should come only once with the a record and
s) and detail section.
example:
main table of the sub report 4 has records m1,m2,m3,m4... and child table has
m1c1m,m1c2,m1c3,m1c4,m2c1,m2c2,m2c3,m2c4,m3c1,m3c2,m3c3,m3c4,m4c1,m4c2,m4c3,m4c4...
The staic content should come only with m1,m2,m3,m4 not with m1c1,m1c2....like this I need in two places in the same report which may have 500 recors printed in single report.
all the above section should be suppressable with a condition including the top 3 reports.
I am able to get the top 3 reports as per the requirement but my forth sub report is getting displayed after each sub-group 1,2,3 which is not happening with
1,2,3. Only 4th set is repeating with 1,2,3.
THis report is attached with 6 datasets.
I linked the main report main table with 1,2,3 (main Table) report filling table but when I am trying to link the 4th table main table I am able to link but
I am not getting the result on the report.All the dataset has the one common column. sub report 1,2,3 are filled with common datasets with condition suppressing where as 4th report is filled with
different results .
1) My question is why the 4 the report is report is repeating with 1,2,3 why 1,2,3 are coming as expected.2) Is it possible to create
Please help me in designing the report as per the requiremnt and suggest me if I need any design modifictions.
Your suggestions and inputs are highy appreciated.Thanks for sparing time in going through my problem and I will be grateful if give solution and share if you have similar experiences.
Thanks
Venkatesh Varakala.

If you create a multiprovider with the two ODS you wont have this problem.
Hope it helps.
Regards.

Problem when changing the target quantity for a contract

Hello,
I have a problem when i try to change the target quantity for a contract through the BAPI 'BAPI_CONTRACT_CHANGE'.
I filled the tables 'item' and 'itemx' with new values. the BAPI 'BAPI_CONTRACT_CHANGE' returns no error, but after using the BAPI 'BAPI_TRANSACTION_COMMIT' I get an info message from SAP and the modification does not pass.
In debugger I could locate the error. In fact, the appeal of FM 'ME_UPDATE_DOCUMENT is done with a table XEKKN with the new values of the quantity and a KZ code equal to ' I ' to insert, then it must have the value ' U 'for update .
Is someone can help me to solve this problem?
Thank you in advance.

Have you tried selecting the page, and then changing the theme directly on that page?

Module pool ---Problem in finding the line index for the table control

Hi Friends,
I am working in Module pool programming.
My requirement is when i select any record on the lead selection I need to find out the index of the line on which row i have selected.
Could any one please suggest me the proper solution how to get the line index for the table control in module pool programming.
Thanks
Satish Raju

Hi Raju,
Follow the steps
<li>U should take one variable in your internal table or in structure which is used for table control fields.
 DATA :BEGIN OF itab OCCURS 0 ,
 mark TYPE c ,
 matnr LIKE mara-matnr ,
 matkl LIKE mara-matkl,
 maktx LIKE makt-maktx,
 END OF itab .
 controls: tabc types tableview using screen 100.
<li>This mark variable should be given in Table control properties. follow the path
double click on the table control-->attributes .->select w/SelColumn and in that give itab-mark.
<li>Flow logic of the screen
 process before output.
 MODULE status_0100.
 LOOP AT itab with control tabc
 endloop.
 process after input.
 module cancel at exit-command.
 LOOP AT itab.
 MODULE read_table_control.
 ENDLOOP.
 MODULE user_command_0100.
<li>read_table_control module code
 MODULE read_table_control INPUT.
 MODIFY itab INDEX tabc-current_line."this will update the itab table
 "mark field with 'X ' whatever we
 "have selected on table control
 ENDMODULE.
<li>If you want to Delete some of the records from Table control follow this code u2026Create one pushbutton and give Fucnction code to that and write below code
 CASE okcode.
 WHEN 'DELETE'.
 LOOP AT itab WHERE mark = 'X'.
 DELETE itab.
 ENDLOOP.
 ENDCASE.
I hope that it helps you.
Thanks
Venkat.O

Problem in activating the ODS

Hi experts,
while activating the data in the ODS , I am getting the following errors.
"System error ocurred(RFC Call)"
Activation of data records from ODS object XXX terminated
"Task 0031 for parallel SID assigment terminated with errors"
"Task 0021 for parallel SID assigment terminated with errors"
"Task 0009 for parallel SID assigment terminated with errors"
"System error ocurred(RFC Call)"
Task 004 2for parallel SID assignment terminated with errors.
When I saw the dump I found the following message
How to correct the error
"MESSAGE_TYPE_X" C
"SAPLRSATREE " or "LRSATREEF28 "
"RSATREE_START_ACTIVATION"
I
                                                                                Information on where termination occurred
The termination occurred in the ABAP program "SAPLRSATREE " in
"RSATREE_START_ACTIVATION".
The main program was "SAPMSSY1 ".
The termination occurred in line 536 of the source code of the (Include)
program "LRSATREEF28 "
of the source code of program "LRSATREEF28 " (when calling the editor 5360).

Hi Kris,
Do u have any red requests in ur ODS Manage. This error is caused when u have red requests and still u r trying to activate the data in the ODS.
Or Probably u have check the check box for bex reporting in setings of ods, Uncheck it and ur error will go.
Try these and let us know
Regards
Majeed

A problem in activating the BlackBerry service

problem in bb8900. bbm not work and browser, please help
mhbh

Hello again.
Interesting choice you have made -- to simply repost the exact same message from before. So, in light of zero details from you, you force us to guess -- hopefully we will guess right. The risk is yours.
I suggest the following steps:
1) Register HRT
Homescreen > Options > Advanced Options > Host Routing Table > BBKey (it does not matter which line is current) > Register Now
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then please provide us something more to go on...your economy with words, while admirable, makes it very difficult to provide you with anything meaningful.
Thanks.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problems in activating the structure CI_Aufk for enhancemant CONFPP07 ?

Similar Messages

Maybe you are looking for