Problems in adapter monitoring

Hi all,
We have a problem when we try to see the list of adapters in the adapter monitoring. It is showing only JPR adapter and the names of all the other adapters are missing.
But we were getting the names of all adapters when we are trying to configure the adapter in the communication channel. We are working on a newly installed XI.
Can anybody help me in this.
Thanks in advance,
Divija

Hi Michal,
We have already imported the .tpz file of SAP Basis 6.40 but still we are unable to find any adapters under the Adapter monitoring. 
When we click Adapter Monitoring, we only get JPR with a red status.  Also on clicking the JPR node, the SLD access is also having red status.  The error message is pasted hereunder:-
Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for XIT.SystemHome.itcxi1 found
No access to get JPR configuration
Kindly suggest how to get all the adapters displayed under Adapter Monitoring.  Thanks in advance.
Regards.
Bagavathi

Similar Messages

  • Problem in adapter monitoring on newly installed pi7.0

    hello all,
           i am working on file to jms scenario. File adapter is picked the file. but jms adapter is not received. in adapter monitoring no messages are displayed. Messages are storing into smq2. in sxmb_moni Q.Status showing stop. sxi_cache showing Unable to refresh cache contents. we installed pi7.0 newly, is there any configuration problem? Plz suggest me
    Thanks

    1. initially make sure the Queus are registred ( i think it might be)
    2. the status of the message in the queue did it errored out ( System faileure ) etc SMq2
    3. data might be stuck in the queue when the reciveiver systemn is not able to retrive that...there might be some problem in the reciver adapter also...just reativate the JMS adapter....
    If the mesage in the Smq2 is failed then definatley some error in the JMS adapter side....reactivate the JMS receiver adapter...sometimes the Adapter monitoring will not show th updated status of the adapter...run the interface again and check...

  • Communication channels not shown in adapter monitoring

    Hello everybody,
    we got several communication channels running on the same file-adapter.
    But in adapter monitoring only ONE communication channels is shown.
    The other communication channels are not shown although we expected them at least with an error.
    Any ideas?
    Thanks a lot
    Regards Mario

    Hi,
    I think, you have chosen the selection criteria only for the Correct one in the Page.. Check with All information in adapter monitoring screen.
    Following will be looked once you don't have any adapters are visible..
    Check SAP BASIS Content is imported in the IR or not.
    Check this thread also-
    Problems in adapter monitoring
    Regards,
    Moorthy
    Message was edited by: Krishna Moorthy P
    Message was edited by: Krishna Moorthy P

  • J2EE adapter monitoring problem/no error description found

    Hi!!!
    I have a problem with J2EE adapter monitoring.
    When I use SOAP adapter (receiver, asynchronous mode)
    and there is an error in Web Service (for example,
    the structure of the message is incorrect) then in Workbench
    (in an adapter monitoring) I can only find information that
    there is "application error" and nothing more
    (I searched also logs and I didn't find anything).
    But when there is an error in Web Service then
    there are details about this error in ACK message,
    for example that required tag is omitted
    (I can see this information in the TCPMonitor when
    I configure it between SOAP adapter and Web Service).
    In "old days" when I use plain Adapter Engine
    I could find all information about errors
    in Integration Engine Monitoring (sxmb_moni):
    - error message (like "application error") was in the "error" node,
    - and details about this error (like "java.io.FileNotFound" (...), for example)
    were in the "trace" node.
    I suppose there is something wrong with my eyes now that I can't see these details,
    so please tell when can I find that.
    We have SP12.
    Regards,
    Andrzej

    Hi Andrzej
    Check this OSS Note 856597
    cheers
    Sameer

  • Problem in pi7.0 Adapter monitoring

    hello all,
    i am working on file to jms scenario. File adapter is picked the file. but jms adapter is not received. in adapter monitoring no messages are displayed. Messages are storing into smq2.queues are registered.  in sxmb_moni Q.Status showing stop. sxi_cache showing Unable to refresh cache contents. we installed pi7.0 newly, is there any configuration problem? Plz suggest me.
    Thanks
    k san

    Hello Neaves,
         I got  following error in sdmb_moni Trace. I activated Exactly once and Exactly once in order queues.
    <!--  ************************************
      -->
      <Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
      <Trace level="1" type="T">COMMIT is done by XMB !</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
      <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">XMB entry processing</Trace>
      <Trace level="1" type="T">system-ID = PI7</Trace>
      <Trace level="1" type="T">client = 020</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2007-10-26T21:18:11Z CET</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = 08D2EE60840011DC82AC00188BE4EACE</Trace>
      <Trace level="1" type="T">PLNAME = CENTRAL</Trace>
      <Trace level="1" type="T">QOS = EO</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
      <Trace level="1" type="T">Queue name : XBTI0005</Trace>
      <Trace level="1" type="T">Generated prefixed queue name = XBTI0005</Trace>
      <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Going to persist message</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">--start sender interface action determination</Trace>
      <Trace level="1" type="T">select interface Source_MI*</Trace>
      <Trace level="1" type="T">select interface namespace http://file_to_file</Trace>
      <Trace level="1" type="T">no interface found</Trace>
      <Trace level="1" type="T">--start receiver interface action determination</Trace>
      <Trace level="1" type="T">Loop 0000000001</Trace>
      <Trace level="1" type="T">select interface *</Trace>
      <Trace level="1" type="T">select interface namespace</Trace>
      <Trace level="1" type="T">no interface found</Trace>
      <Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
      <Trace level="1" type="T">Hence set action to DEL</Trace>
      </SAP:Trace>+
    Thanks

  • Problem in the adapter monitor.

    Hi people,
    I need to connect XI with other server. but when I made the test the adapter monitor show me this error:  FTPEx: Unable to build data connection: Connection timed out
    Any one can help me?
    Thanks for the help!

    Hi,
    make sure the ftp ports are opened from XI server to the ftp server (or internet etc)
    Regards,
    michal

  • Link to Communication Channel and Adapter Monitoring not opening

    Hello All,
    we are on PI 7.0. In teh RWB, we are not able to see the Communication Channnel Monitoring as well the Adapter Monitoring It is giving Page cannot be Displayed.
    please tell us the way ahead.
    Regards
    Chakra and Somnath

    Hi Somnath,
    when the error occurs check the url of the page that cannot be displayed and verify if the hostname is correct.
    It could be a problem of not right setting in exchange profile.
    Also verify that you have enough authorization, trying to logon with PISUPER user if you can.
    Hope it helps,
    Regards,
    Sergio

  • Sender ADapter Monitor- ArrayIndexOutOfBOunds Exception

    Hi
    As me subject line reads,  I am getting an "ArrayIndeXOutofBOunds 9" exception at the sender adapter monitor logs in the RWB.
    I have an a<i>dapter monitor module</i> that picks up the file from the source  and pushes the file to a target directory based on some condition. I am able to see the file being pushed to the target directory but not able to view the "pipeline steps" in the message monitor.
    Do you think a restart of the server might fix the issue/ do you think there is a problem in my code. I have used just one array and i have checked that array if it is being accessed out of its bounds?
    Thanks
    krishna

    Hi,
    >>>>>ArrayIndeXOutofBOunds 9"
    looks like an error in code
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Color correction problems with multiple monitors

    I just upgraded my Win 7 from RC to RTM.  I then updated my color correction using Gretag Macbeth i1 for both adapters. My system has 2 video cards and 3 monitors.  Monitor 1 runs off adapter 1, monitors 2 & 3 run off adapter 2.  Both video cards and all 3 monitors are of the same model.  I set adapter/monitor 1 to the ICC profile 1, and adapter 2/monitor 2&3 to ICC profile 2 from Gretag.  Not running LR, everything looks as expected.
    When I run LR on the primary monitor green leaves turn orange, if I had to guess I would say I'm loosing the green information.  If I move LR to display 2 or 3 the colors are as they should be.
    I ran into this once before and it was something simple to fix this, but I can't seem to find it now.   BTW, this worked just fine before the upgrade from RC to RTM.

    At first I thought a reboot cured the problem, but apparently not.

  • Adapter Monitor Error and SQLServer JDBC Test

    Hello !
    I have a problem with communication in scenario RFC>XIJDBC !
    How i can test my JDBC Coonnection ...database is SQL Server !
    In Adapter Monitor i have two errors:
    1 - JDBC Error:
    Receiver Adapter v2112 for Party '', Service 'BS_IBATCH':
    Configured at 2006-06-01 14:45:27 BRT
    History:
    - 2006-06-06 16:08:47 BRT: Error: TransformException error in xml processor class: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
    - 2006-06-06 16:08:47 BRT: Processing started
    - 2006-06-06 16:03:46 BRT: Error: TransformException error in xml processor class: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
    - 2006-06-06 16:03:46 BRT: Processing started
    - 2006-06-06 15:58:46 BRT: Error: TransformException error in xml processor class: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
    2 - JPR Error:
    Error getting JPR configuration from SLD. Exception: No entity of class SAP_BusinessSystem for NWD.SystemHome.euro11 found
    No access to get JPR configuration
    Someone can help mme in this question?
    Regards.
    MBoni

    Hi,
    The JDBC adapter error looks like- your xml document is not correct. ie. the structure which is given to JDBC adapter.
    Have a look into this-
    http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm
    Also look into this-for structure
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
    Regards
    Moorthy

  • More fields in XML structure error in Adapter Monitor

    Hi all
    I am getting the following error in the adapter monitor
    Error: Message processing failed: Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value ' ')', probably configuration error in file adapter (XML parser error)'
    I am using FCC in the rx adapter. I have also checked the fields for any extra fields but there isnt any.
    kindly suggest what could be throwing the error
    regards
    krishna

    Hi raj
    here are the CC parameters.
    BEGIN.addHeaderLine     0
    BEGIN.fieldFixedLengths     2,1,3,2,4,1,8,12,8,2,307,12,8,12,18
    BEGIN.fixedLengthTooShortHandling     Ignore
    BEGIN.endSeparator     '0x0D''0x0A'
    CLIENT_RECORD.addHeaderLine     0
    CLIENT_RECORD.fieldFixedLengths     2,12,9,4,15,15,4,20,12,9,8,1,1,25,10,1,25,10,1,6,1,1,1,1,1,10,8,1,25,2,1,1,1,106,12,38
    CLIENT_RECORD.fixedLengthTooShortHandling     Ignore
    CLIENT_RECORD.endSeparator     '0x0D''0x0A'
    RELATION_RECORD.addHeaderLine     0
    RELATION_RECORD.fieldFixedLengths     2,12,9,4,20,20,2,2,9,8,1,25,10,1,25,10,1,6,1,1,181,12,38
    RELATION_RECORD.fixedLengthTooShortHandling     Ignore
    RELATION_RECORD.endSeparator     '0x0D''0x0A'
    ADDRESS_RECORD.addHeaderLine     0
    ADDRESS_RECORD.fieldFixedLengths     2,12,9,4,20,20,2,2,5,6,8,24,24,2,35,15,4,15,4,70,8,8,1,50,12,38
    ADDRESS_RECORD.fixedLengthTooShortHandling     Ignore
    ADDRESS_RECORD.endSeparator     '0x0D''0x0A'
    GIVING_REC.addHeaderLine     0
    GIVING_REC.fieldFixedLengths     2,12,9,4,20,9,1,1,1,1,1,1,1,1,1,1,1,1,1,281,12,38
    GIVING_REC.fixedLengthTooShortHandling     Ignore
    GIVING_REC.endSeparator     '0x0D''0x0A'
    ZIKT_REC.addHeaderLine     0
    ZIKT_REC.fieldFixedLengths     2,12,9,4,20,9,2,3,2,8,1,1,277,12,38
    ZIKT_REC.fixedLengthTooShortHandling     Ignore
    ZIKT_REC.endSeparator     '0x0D''0x0A'
    BEPER_REC.addHeaderLine     0
    BEPER_REC.fieldFixedLengths     2,12,9,4,20,9,1,1,1,291,12,38
    BEPER_REC.fixedLengthTooShortHandling     Cut
    BEPER_REC.endSeparator     '0x0D''0x0A'
    SCORE_BEPER_REC.addHeaderLine     0
    SCORE_BEPER_REC.fieldFixedLengths     2,12,9,4,20,9,1,3,4,1,1,284,12,38
    SCORE_BEPER_REC.fixedLengthTooShortHandling     Ignore
    SCORE_BEPER_REC.endSeparator     '0x0D''0x0A'
    INDBES_REC.addHeaderLine     0
    INDBES_REC.fieldFixedLengths     2,12,9,4,20,9,9,2,2,8,8,8,1,256,12,38
    INDBES_REC.fixedLengthTooShortHandling     Ignore
    INDBES_REC.endSeparator     '0x0D''0x0A'
    FUNCTIONAL_REC.addHeaderLine     0
    FUNCTIONAL_REC.fieldFixedLengths     2,12,9,4,20,9,9,3,2,8,8,8,1,4,2,2,1,1,1,1,8,1,1,233,12,38
    FUNCTIONAL_REC.fixedLengthTooShortHandling     Ignore
    FUNCTIONAL_REC.endSeparator     '0x0D''0x0A'
    ACT_REC.addHeaderLine     0
    ACT_REC.fieldFixedLengths     2,12,9,4,20,9,9,3,2,8,3,5,1,263,12,38
    ACT_REC.fixedLengthTooShortHandling     Ignore
    ACT_REC.endSeparator     '0x0D''0x0A'
    SCORE_REC.addHeaderLine     0
    SCORE_REC.fieldFixedLengths     2,12,9,4,20,9,3,4,1,1,285,12,38
    SCORE_REC.fixedLengthTooShortHandling     Ignore
    SCORE_REC.endSeparator     '0x0D''0x0A'
    ZFUNCTIONAL_REC.addHeaderLine     0
    ZFUNCTIONAL_REC.fieldFixedLengths     2,12,9,4,20,9,9,12,3,2,8,8,5,1,8,8,8,4,2,2,1,1,1,1,210,12,38
    ZFUNCTIONAL_REC.fixedLengthTooShortHandling     Ignore
    ZFUNCTIONAL_REC.endSeparator     '0x0D''0x0A'
    ZACT_REC.addHeaderLine     0
    ZACT_REC.fieldFixedLengths     2,12,9,4,20,9,9,3,2,3,5,8,8,5,8,1,242,12,38
    ZACT_REC.fixedLengthTooShortHandling     Ignore
    ZACT_REC.endSeparator     '0x0D''0x0A'
    COMMENT.addHeaderLine     0
    COMMENT.fieldFixedLengths     2,12,4,140,1,191,12,38
    COMMENT.fixedLengthTooShortHandling     Ignore
    COMMENT.endSeparator     '0x0D''0x0A'
    END_REC.addHeaderLine     0
    END_REC.fieldFixedLengths     2,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,1,257,50
    END_REC.fixedLengthTooShortHandling     Ignore
    END_REC.endSeparator     '0x0D''0x0A'
    REgards
    krishna

  • Cannot send file to XI ,and File Adapter Error in RWB- Adapter Monitor

    i develop the file to file scenario, and everything in Integration Builder is right, and the configuration is no problem
    but it cannot send file to XI, so the whole process
    cannot start. The file adapter seems not work
    how can i solve the problem?
    Thank you for your reply

    Hi Leo,
    I Guess you should first see if the file is being picked... for that do the following.
    While configuring your Sender File Adapter, let the mode be DELETE. This way, we will know if the file is being picked by the File adapter. The file will be deleted and you can be sure that it has been picked up.
    In your runtime workbench home, there will be a tab, Component Monitoring, click on it. Select status as all, and click on display. The components will be displayed on ur screen. In that, under Integration Server, there will be a link for Adapter Engine. Click on it. Now, scroll down, and u will see a link to adapter monitoring, there under FILE ADAPTER see the log of the file adapter
    and also, you can see the flow of your message in the integration engine in SXMB_MONI.
    <b>Do this and let us know what is happening...</b>
    Meanwhile i would also suggest you to go through the explanation of a simmilar scenario that i have explained below and compare it with what you have done..
    Please go thru the following links and clear all your doubts.
    Communication channel:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/65/b11c409ce22402e10000000a1550b0/frameset.htm">Assigning Communication Channels</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/2b/d5653fd1d3b81ae10000000a114084/content.htm">Communication Channel</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm">Configuring the Sender File/FTP Adapter</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm">Configuring the Receiver File/FTP Adapter</a>
    Receiver agreement:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/56/02e63f48e58f15e10000000a155106/frameset.htm">Receiver Agreement</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/c1/5194426b44c56ae10000000a155106/frameset.htm">Creating a Receiver Agreement</a>
    Sender agreement:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/db/73e03fc2269615e10000000a155106/frameset.htm">Sender Agreement</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/22/522041cfb7f423e10000000a155106/frameset.htm">Creating a Sender Agreement</a>
    For detailed info, I would suggest that you go through these weblogs:
    <a href="/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1">Introduction to simple(File-XI-File)scenario for Starters</a>
    <a href="/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2">Introduction to simple (File-XI-File)scenario for starters part2</a>
    I hope it helps.
    Regards,
    Abhy

  • Adapter Monitoring

    Hi,
    My RFC senario is giving me an error,I went to component monitoring-->Adapter Monitoring and saw the list of adapters.I see that the RFC adapter is red,does it mean the adapter is down?how do I troubleshoot it?This is the error I have in RWB.
    Sender channel 'CC_RFC_*********' for party '', service 'SYSTEM_XI_010'
    Error can not instantiate RfcPool caused by:
    com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcServerPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: User is locked. Please notify the person responsible
    Thanks

    Hi,
    ->According to our error above you have problem with your gatway connection . can you make sure ur using correct gateway service. something like sapgw00 00 is system number. you get this in smgw.
    ->Check that the RFC Destination that you have created Do Connection Test & Remote LOgon also Re-Enter the User & Pwd Once again.
    Please take a look at the below error. It looks like same error what you have.
    RFC sender adapter error
    Plz do refer the following links:
    JCO_ERROR_RESOURCE
    /thread/2978 [original link is broken]
    Number of connections expiry problem - URGENT
    Please reward points if it helps
    Thanks
    Vikranth

  • False Error in the Adapter Monitor/File Adapter

    I have a receiver file adapter that is showing a 553 Permissions error when the file is actually delivered.  This shows up in the adapter monitor and the message monitor.   
    I've been looking around but I couldn't find anyone who had this problem.

    Hi Mark,
    I think this error is because of Spaces/or and Invalid Characters like  -!"£$%^&*'#... in the file name.
    Just check it. ARe you using FTP server ? or NFS ?
    If it is FTP then also check that  user has a file write permission in the FTP server
         >>Also this may be because of  you don't have righ to write the directory/file(file permissions) with the name already exists i.e overwrite rights..
    Regards,
    Moorthy
    Message was edited by: Krishna Moorthy P

  • Communication channel monitoring, adapter monitoring error

    Hi ,
    I am using SAP PI 7.0 with HP-UX.
    Here we have 6 logical hosts in one physical host.
    Physical host name is u2013 xyz
    Integration server name u2013 sappid
    The Central SLD: sappid
    URL for sappid: sappid: 50300
    When I monitoring RWB----
    >communication channel monitoring, adapter monitoring, in Development system It's detecting another logical host ( like www://sapard:50300 )  and getting page cannot find error.
    1.SLDCHECK
       http://xyz:50300/sld  
       host name: xyz
      port number: 50300
      user : SLDDSUSER
    2.SXMB_IFR
       http://xyz:50300/rep/start/index.jsp
    3.SMICM
       icm/server_port_0 = PROT=HTTP,PORT=8003
       icm/server_port_1 = PROT=SMTP,PORT=0
       icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
       icm/host_name_full = sappid
    4. SLDAPICUST
        SAP_CONFIG   1   xyz   50300   SLDDSUSER
    5. SXMB_ADMIN
        Role of Business System Integration Server
        Corresponding Integ. Server http://sappid:8003/sap/xi/engine?type=entry
       Integration Engine Configuration Data -> Check button
    6.When I opened the http://xyz:50300/rep/start/index.jsp I got the
      XI start page.
        when I opened the http://sappid.AIG.com:50300/
       the page not found issue, when I opened http://sappid:50300/ I got the
       XI start page.
    plz help me for this issue.
    thanks in advance.
    regards,
    reddy.

    Hello,
    I think the FQDN is not set properly.
    Problem in the parameter
    SMICM
    icm/server_port_0 = PROT=HTTP,PORT=8003
    icm/server_port_1 = PROT=SMTP,PORT=0
    icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
    *icm/host_name_full = sappid *
    Replace this parameter in instance profile
    icm/host_name_full = sappid.AIG.com
    Then in the host entry of your server please add an entry
    172.18.23.233(ip your ur Xi server)       sappid.AIG.com
    Then let us know the result.
    Thanks and Regards
    Vijay

Maybe you are looking for