Problems in adding a new Page

I am trying to create a new project in JDev using OAF. I could successfully create a VO as well as AM but when I go to the OA Components the items under it - Package file, Page, Region are all inactive.
At the bottom it is written that "+To enable this option, you must select an Oracle Applications project or a file within an Oracle Applications project in the Navigator+".
Does it mean I have missed out some property setting to my project.
Can any one please help me.
Regards
Hawker

Hi Hawker ,
To create a new OAF page , you need to follow the below steps
1>Create workspace
2>Create project (Here you need to give the project directory structure)
3>Create page
4>Create VO ...
5>Assign VO to AM
So to see the structure window you need to go to the respective page in the project in jdev, then you can see the property inspector in the right side of Jdev, there you can give all the details about the page i.e page title, window title, AM name etc...
OR
Still the property inspector is inactive then you can select it from view tab.
Thanks
Deb

Similar Messages

InDesign CC crashes when i adding a new page

Hi together!
When I adding a new page InDesgin CC crashed. I tested it on two PC with Windows 7 and Windows 8. I also created a new document. Always the same problem when adding a new page. Can anyone help me?
Regards
Christian

Having similar problem for second time (different files, different content) in the past two months.
Using IDCC2014 (10.2.0.69) on Mac OS 10.10.3.
When inserting a new frame (whether a newly placed image or an empty frame) with text wrap, text reflows (as expected) but InDesign quits (no warning or error, it just quits).
Inserting a new page and reflowing text also causes ID to quit.
Finding earliest page in document where the problem begins (similar to above reply; in my two cases that is p. 2 and p. 23) and deleting the text frame on that page causes ID to quit.
I work on quite a few books with many elements, but the files in question are just straight text with page numbers (not even running heads) and some illustrations to be inserted.
Saving as IDML does not resolve the issue. Trashing preference does not resolve the issue.
Dragging pages to a new file does not resolve the issue. But if text is copied-and-pasted into a new file then that new file will work fine.
The problem is consistent at various work stations across three different locations/networks.
The only fix has been to delete ALL of the document pages from the affected area on and do the work again, i.e., redraw new pages and apply the chapter opening master pages again. Deleting just the first page where problem is found or the first two pages where problem is found or first four pages where problem is found, etc., causes ID to quit.
In the case of this second file (I don't have the first file onhand right now), it does not have a long save history; it's not from a legacy template file or something like that. Cracking open the IDML file confirms only four saves beyond the initial creation and all in IDCC2014.
Anyone else coming across this problem? Any suggestions?

Hi. I've added a new page to my iWeb '08 version 2.0.4 website but can't seem to select the top menu pages to make a rollover color change. I can select them on the original pages. What am I doing wrong?

Hi. I've added a new page to my iWeb '08 version 2.0.4 website, but can't seem to select the top menu items to make a rollover color change. I can select them on the original pages. What am I forgetting to do?

Old Toad has a tutorial about changing the colors in the iWeb default menu...
http://oldtoadstutorials.net/No.24.html
If you want your website to be found by search engines you would be better to follow Ethmoid's suggestion of creating your own navigation...
http://www.iwebformusicians.com/iWeb/Navigation.html

Problem in adding the new column in VO : ADF

Hi,
I am using jdev 10.1.3.2 with ADF.
I added a new column in a table in the database. In my ADF application, I right clicked on the entity object of the changed table, and selected ‘Synchronize with DB’ which added the new column in the entity object also.
I had a jsp which uses this view object’s (VO). I had to change the VO also to add this new column.
After all this, in the jsp page, I dragged and dropped this new column as an input text field.
But while running this page, the field is empty. Also when I drag and drop it, this field doesn’t have the ‘id’ attribute.
Below is the code. Please let me know how I can fix this issue.
<af:inputText value="#{bindings.RebillNumber.inputValue}"
label="#{bindings.RebillNumber.label}"
required="#{bindings.RebillNumber.mandatory}"
columns="#{bindings.RebillNumber.displayWidth}">
<af:validator binding="#{bindings.RebillNumber.validator}"/>
</af:inputText>
Thanks,
Venki

Hi Venki,
Please check if the object on the page is bound to the same iterator as the other components. Sometimes dragging and dropping new attributes makes JDev create a new iterator, and the two iterators will not be in sync.
You can check this in the pageDef file and correct any strange things you may find.
Jeroen van Veldhuizen

Problem with adding a new InfoProvider in Report Designer

Hey experts,
I have a problem to add a new Infoprovider in Report Designer. I get the following message:
Query consists variables. Please use a query view (variables are filled).
Can anyone tell me what the problem is.
Thanks in advance.
Best Regards
Ali

Hi Ali,
Note 931838 describes this issue.
Best regards,
Janine

Problem in adding a new business partner

hi all
           iam getting an error like "Bank account is missing",when i add a new business partner..i think iam missing any mandatory field..can anybody help me..i have posted my add BP coding in the last...
<?xml version="1.0" encoding="utf-8" ?>
- <env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
- <env:Body>
- <env:Fault>
- <env:Code>
<env:Value>env:Receiver</env:Value>
- <env:Subcode>
<env:Value>-5002</env:Value>
</env:Subcode>
</env:Code>
- <env:Reason>
<env:Text xml:lang="en">Bank account is missing</env:Text>
</env:Reason>
- <env:Detail>
<Object>2</Object>
<ObjectIndex>1</ObjectIndex>
<Command>AddObject</Command>
<SessionID>EE10Cu91-F252-CB47-58A6-9929L682316F</SessionID>
</env:Detail>
</env:Fault>
</env:Body>
</env:Envelope>
the coding for adding a new business partner is,,
<WebMethod()> Public Function QueryBP(ByVal SessionID As String, ByVal CardCode As String, ByVal CardName As String) As Xml.XmlDocument
        Dim DISnode As SBODI_Server.Node
        Dim strSOAPans, scmd As String
        Dim xmlDoc As Xml.XmlDocument
        xmlDoc = New Xml.XmlDocument
        DISnode = New SBODI_Server.Node
        sCmd = "<?xml version=""1.0"" encoding=""UTF-16""?> "
        sCmd += "<env:Envelope xmlns:env=""http://schemas.xmlsoap.org/soap/envelope/""> "
        sCmd += " <env:Header> "
        sCmd += "<SessionID>" & CStr(SessionID) & "</SessionID>"
        sCmd += " </env:Header> "
        sCmd += " <env:Body> "
        sCmd += "<dis:AddObject xmlns:dis=""http://www.sap.com/SBO/DIS"" > "
        sCmd += "<BOM>"
        sCmd += "<BO>"
        sCmd += "<AdmInfo>"
        scmd += "<Object>oBusinessPartners</Object> "
        scmd += "</AdmInfo> "
        scmd += "<QueryParams>"
        scmd += "<CardCode>" & CStr(CardCode) & "</CardCode>"
        scmd += "</QueryParams>"
        scmd += "<BusinessPartners>"
        scmd += "<row>"
        scmd += "<CardCode>" & CStr(CardCode) & "</CardCode>"
        scmd += "<CardName>" & CStr(CardName) & "</CardName>"
        scmd += "</row>"
        scmd += "</BusinessPartners>"
        sCmd += "</BO> "
        sCmd += "</BOM> "
        sCmd += "</dis:AddObject> "
        sCmd += " </env:Body> "
        sCmd += "</env:Envelope> "
        strSOAPans = DISnode.Interact(scmd)
        xmlDoc.LoadXml(strSOAPans)
        Return (RemoveEnv(xmlDoc))
    End Function

Hi michael,
                   Even if i declare like below it's showing the bank account is missing..
scmd += "<BusinessPartners>"
        scmd += "<row>"
        scmd += "<CardCode>" & CStr(CardCode) & "</CardCode>"
        scmd += "<CardName>" & CStr(CardName) & "</CardName>"
        scmd += "<BankCountry> </BankCountry>"
        scmd += "</row>"
        scmd += "</BusinessPartners>"

Problem with adding a new row in JTable

Hi,
I've created a JTable using DefaultTableModel with DefaultTableModel(Object[][] obj,Object[] col) constructor.I've written actionListener for a JButton which should add new row to the tablemodel.Now, the listener adds the row to the model.But its throwing an ArrayOutofBoundsException and the added row is not visible unless I click on any column of the table.
Kindly help me to resolve this problem
TIA
Regards
Gopi

Thanks a lot for the reply. Here is the complete code
TableImpl.java
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.table.*;
import java.util.Vector;
public class TableImpl extends JFrame {
DefaultTableModel dataModel;     // TableModel Variable
/* Constructor to add table and button to the frame     */
TableImpl() {
          getContentPane().setLayout(null);
          setSize(800,600);
          myModel();
          final JTable table = new JTable(dataModel);
          JScrollPane scrollpane = new JScrollPane(table);
          getContentPane().add(scrollpane);
          scrollpane.setBounds(10,10,700,300);
          TableColumn tcCol = table.getColumnModel().getColumn(1);
          /* Adding ComboBox to the CellEditor of Column 2 of table     */
          JComboBox jcbComboBox = new JComboBox();
          final ReturnVector vctDBAccess = new ReturnVector();
          jcbComboBox.addItem(vctDBAccess.vctGetOidList().elementAt(0).toString());
          jcbComboBox.addItem(vctDBAccess.vctGetOidList().elementAt(2).toString());
          jcbComboBox.addItem(vctDBAccess.vctGetOidList().elementAt(4).toString());
          tcCol.setCellEditor(new DefaultCellEditor(jcbComboBox));
          /*     Adding Listener for Table      */
          dataModel.addTableModelListener(new TableModelListener() {
               public void tableChanged(TableModelEvent e) {
          /* Columns Manipulation */
                    if(dataModel.getColumnName(e.getColumn()).equals("Second")) {
                    int iRow = e.getFirstRow();
                    int iColumn = e.getColumn();
                    String strColName = dataModel.getColumnName(iColumn);
                    String strData = (String)dataModel.getValueAt(iRow,iColumn);
                    String strNextColumn = dataModel.getColumnName(iColumn+1);
                    dataModel.setValueAt(vctDBAccess.vctGetOidList().elementAt(vctDBAccess.iGetIndex(strData)+1),iRow,iColumn+1);
          /* Adding button to Frame     */
          JButton jbInsert = new JButton("Insert");
          /* Adding new row to the Tablemodel -- Probelm is here     */
          jbInsert.addActionListener(new ActionListener(){
          public void actionPerformed(ActionEvent e){
                    try {
               Object[] nrow = {"what", "ever", "you"};
               dataModel.addRow(nrow);
               }catch(Exception ex) {
               System.out.println("Exception at adding row = " + ex);
getContentPane().add(jbInsert);
jbInsert.setBounds(100,350,100,20);
addWindowListener(new WindowAdapter() {
          public void windowClosing(WindowEvent e) {
               System.exit(0);
     /* Method to initialise new tablemodel     */
     public void myModel() {
          Object[][] data = { {new Integer(10),"two","three"},
                                             {new Integer(5),"two","three"},
                                             {new Integer(4),"two","three"},
          String[] col = { "First", "Second", "Third"};
          dataModel = new DefaultTableModel(data,col);
public static void main(String arg[]) {
          TableImpl ct = new TableImpl();
          ct.setVisible(true);
/* Class that returns a Vector of String for populating ComboBox entries and
          for getting the index of a particular element of the vector          */
class ReturnVector {
               Vector vctOidName=null;
               ReturnVector() {
                    this.vctOidName = new Vector();
                    vAddOidList();
               public void vAddOidList() {
                    String[] dbResult = {      "system", "1.3.6.1.2.1.1" ,
                                                  "interface", "1.3.6.1.2.1.2" ,
                                                  "snmp", "1.3.6.1.2.1.3" };
                    for(int i=0;i<dbResult.length;i++) {
                         System.out.println("Value = " + dbResult);
                         vctOidName.addElement(dbResult[i]);
               public Vector vctGetOidList() {
                    return vctOidName;
               public int iGetIndex(String strData) {
                    System.out.println("Index = " + vctOidName.indexOf(strData));
                    return vctOidName.indexOf(strData);

Problems with adding a new row in my table

Im an ADF beginner but I thought it would be simple to to do some basic CRUD stuff in ADF. Im now even struggling when i try to add a new row to my table.
Seems that the primary key id is not set correctly...
could someone help?

Hi,
Have a look to this page CREATE SEQUENCE
Regards,
Sébastien
Creating a Sequence: Example
The following statement creates the sequence customers_seq in the sample schema oe. This sequence could be used to provide customer ID numbers when rows are added to the customers table.
CREATE SEQUENCE customers_seq START WITH 1000 INCREMENT BY 1 NOCACHE NOCYCLE;

Problem in adding a new row in a table.. plsss hlppp

Hi Friends,
I have a table defaulted to 4 rows. I have a add button to add a new row in the table.
When i have already 4 rows in table, and when i click add its adding that 5th row correctly( and i used set_lead_selection for this new row ).
But i want to automatically make a next page once i hit the ADD button here. Each time now i m hitting next page then only able to see hte 5th row. I need once ADD is clicked, i want to see the 5th row visible..
Can someone tell me how to code or do this
thanks friends,,,
Niraja

hi niraja,
Plz refer to the following code:
method onactiononadd .
node_material type ref to if_wd_context_node.
elem_material type ref to if_wd_context_element.
stru_material type sflight.
node_material = wd_context->get_child_node( name = 'ANNA' ).
elem_material = node_material->get_element( ).
if ( elem_material is initial ).
call method node_material->create_element
receiving
element = elem_material.
endif.
call method elem_material->get_static_attributes
importing
static_attributes = stru_material .
call method node_material->bind_structure
exporting
new_item = stru_material
set_initial_elements = abap_false.
endmethod.
i hope it helps
regards
arjun

Problems with adding a new device in Common Services

Hello,
I have the following problem: I need to add a new device in my Cisco Works. What I do is I go to Common Services >> Device and Credentials >> Device Management. There I click "Add" and I add the new device with the corresponding credential set.
Then, in the RME >> Job Management >> RME Jobs I can see a new job created (
CDA:CDA job due to Device Add. ) because of this addition but this jobs stays always in status Running and it never finishes. Most probablt because of that this newly added device never actually appears in the RME so I cannot operate with it - deploy software, save configs, etc.
I did this test a few times and all the times this is the result.
I tought that it might be a firewall issue blocking some protocol needed for the communication, as SNMP, telnet or something else. But if I go to Decice Center and I select this newly added device (which there appears with the question mark icon, not with the right device icon) I can see all the information for it, like Detailed Device Report, etc.
Then I noticed that in the RME Jobs section I have some more jobs that are like running forever - "
CredEditCDA: CDA job due to Credential Edit".
See the attached image for details:
So, my question is what might be the reason for this behaviour and what can I do in order to unblock these jobs and add my device normally?
What I use is:
Windows Server
LMS 3.2
RME 4.3.0
Thank you in advance,
Vesko

OK,
first of all, have you intergrated lms with ACS ? - check in common services - server - security - single-server mgmt - local user policy setup.
If this is in ACS, check if the newly added devices is in ACS... Check if this devices is reflecting in common services itself...make sure that the device type is selected properly ???
Next do a snmp test in device center for this machine..how would you do this --" in device center, select the device, do a management to station and select the snmpv2 and ok it" you will get if snmp is failing or not...As you mentioned it is coming in question mark..this is because the correct device type is not selected in common services.
Do an update inventory & archive and check the status..
~ rate if this was helpful.
-rajesh

Problem while adding a new data source for the demo for mapviewer...

hello,
i use oracle 10g enterprise edition. i imported the necessary dump files and get the necessary scripts worked. i want to see the demo results in mapviewer. for that, i have to add a datasource. the XML code in order to realize this purpose is:
<?xml version="1.0" standalone="yes"?>
<non_map_request>
<add_data_source
name="mvdemo"
jdbc_host="c-0y5wp0jvd2bf8"
jdbc_port="1521"
jdbc_sid="mvdemo"
jdbc_user="!mvdemo"
jdbc_password="tiger"
jdbc_mode="thin"
number_of_mappers="3" />
</non_map_request>
i press the submit button. then it wants me to enter a username and password. the default is admin/welcome. then i see this result on the browser:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
     <oms_error>
Message:[MapperConfig] eÅleme verileri kaynaÄÄ± eklenemiyor.
Sat Feb 26 02:29:19 EET 2005
Severity: 0
Description:
     at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.java:583)
     at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.java:315)
     at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
     at oracle.lbs.mapserver.oms.doPost(oms.java:409)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)
</oms_error>
by the way, the error message on the application server screen:
05/02/26 02:29:16 INFO [oracle.lbs.mapserver.MapServerImpl] adding a map data sr
c [name=mvdemo]
05/02/26 02:29:18 WARN [oracle.sdovis.ds.nods] java.sql.SQLException: G/â istisn
asÂ²: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:137)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:174)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:286)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:321)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
414)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:149)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
n.java:31)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:551)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
.java:120)
at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
a:613)
at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
java:582)
at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
a:315)
at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
at oracle.lbs.mapserver.oms.doPost(oms.java:409)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:810)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
tHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
05/02/26 02:29:18 WARN [oracle.sdovis.ds.nods] connecting to database using jdbc
thin driver...
05/02/26 02:29:19 ERROR [oracle.sdovis.ds.nods] java.sql.SQLException: G/â istis
nasÂ²: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:137)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:174)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:286)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:321)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
414)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:149)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
n.java:31)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:551)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
.java:136)
at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
a:613)
at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
java:582)
at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
a:315)
at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
at oracle.lbs.mapserver.oms.doPost(oms.java:409)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:810)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
tHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
05/02/26 02:29:19 ERROR [oracle.sdovis.ds.nods] java.sql.SQLException: G/â istis
nasÂ²: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:137)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:174)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:286)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:321)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:
414)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:149)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtensio
n.java:31)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:551)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
.java:136)
at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
a:613)
at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
java:582)
at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
a:315)
at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
at oracle.lbs.mapserver.oms.doPost(oms.java:409)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:810)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
tHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
05/02/26 02:29:19 ERROR [oracle.lbs.mapserver.core.MapperConfig] java.lang.Illeg
alArgumentException: Error creating NativeOracleDataSource.
at oracle.sdovis.ds.NativeOracleDataSource.<init>(NativeOracleDataSource
.java:196)
at oracle.sdovis.ds.DSManager.registerOracleJdbcDS(DSManager.java:86)
at oracle.lbs.mapserver.core.MapperConfig.createMappers(MapperConfig.jav
a:613)
at oracle.lbs.mapserver.core.MapperConfig.addMapDataSource(MapperConfig.
java:582)
at oracle.lbs.mapserver.MapServerImpl.addMapDataSource(MapServerImpl.jav
a:315)
at oracle.lbs.mapserver.oms.addDataSource(oms.java:1241)
at oracle.lbs.mapserver.oms.doPost(oms.java:409)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:810)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
tHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
if someone could help about what to do, i would be grateful..

when defining a data source through the admin web page, don't add '!' in front of the password.
! is needed only when configuring a data source in the mapViewerConfig.xml file.

Problem with forwarding to new page in jsf

Hi
I am facing a problem. I have a checkbox in my jsp page and 3 submit button. The two button works w r t check box and its woking fine. I am getting problem with the 3rd button. I want to fwd to next page once the button is clicked.
For the check box i am using the method
public String handleCheckbox2ValueChange(ValueChangeEvent valueChangedEvent)
Can anyone help me in this regard. I need to fwd to the next page.
Regards
Rupesh

This sounds like a simple JSF navigation that has nothing to do with the checkbox. Read the documentation and tutorials on navigation.

Problem while adding a new row to the table.

hello,
In my ADF form i have a table. and when i click on CreateInsert it add a new to the table but at the first. i want all the new rows to be added at the end of the table in a sequence. how can i do this?....
Thanks and Regards,
Rakshitha

Hi,
Try this:
DCIteratorBinding dciter;
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
dciter = (DCIteratorBinding) bindings.get("findAllTestAndryIter");
ViewObjectImpl vo = dciter.getViewObject();
if (vo != null)
Row row = vo.createRow();
int rangeSize = vo.getRangeSize();
int rowsInRange = vo.getAllRowsInRange().length;
int insertPos = rowsInRange < rangeSize? rowsInRange: rangeSize - 1;
vo.insertRowAtRangeIndex(insertPos, row);
vo.setCurrentRow(row);
}

Problem while adding a new dimension in a existing cube with data in BW3.5

Hi,
We are trying to create a new dimension with new characteristics in a existing cube. But while activating we are getting error that "InfoCube contains data; intentional changes not permitted". Can we add a new dimension in a existing cube with data in BW3.5? If it is not possible then we can take the backup and delete the data from cube and then change the cube. But my question is that, when we will transport the cube with changes to quality then will it transport successfully or same procedure needs to be done there as well.
Regards,
Saikat

hi,
Adding new infoobject /dimension to the cube containing data in 3.5 is not possible.
easier solution is create a new cube similar to old and add the new dimension and proceed.
else you have to drop data and transport.
Ramesh

Problem in adding a new element having attribute & many children for XML(jd

I m creating a new element <row id="1" > & many childrens & similar new elements with increment id are created.
And this is added to a tag 'data'
But after creating when i m iterating thru' the elements of the node 'data', for the new elements which i have created, if i try to set a new value for any of the chidren of 'row' tag, the value is getting set for all other newly created elements

Let's see how you're doing this... got any code?

Problems in adding a new Page

Similar Messages

Maybe you are looking for