Problems in Boot Camp with Wifi and internal speakers

I loaded boot camp from Leopard with no known issues on installation. However, my wireless and internal speakers, which work fine in Leopard, do not work in Boot Camp. I'm guessing it's a driver problem, but I don't know how to proceed. I've tried reinstalling...
Any help is appreciated.
Kerry

Hi Kerrywm, I have exactly the same problem. I can get my Apple Bluetooth keyboard to work fine after I set it up using a wired keyboard. But after a single reboot, the wireless keyboard is 'lost' in Windows XP. It's a real nuisance, it's like the Bluetooth 'preferences' for the keyboard are not remembered by Windows XP after restart. One exception however, after restart, seems to be that the top right hand key, the CD eject key on the keyboard, does work as a '+ volume' control key - its really odd! Fox.

Similar Messages

Anyone having problems installing Boot Camp with New Mac Pro 2.8?

I just get blank screen after it restarts with XP disk. I'm using a vga - dvi adapter with a apple 17" display..
I've phoned apple and read up on here but nobody seems to know. I just wondered whether my 2008 Mac Pro was faulty...
Please can you help?
cheers

Are you getting a white screen after the Mac reboots? If so, try disconnecting all non-essential USB/FW devices.
I had the exact same problem and I went through a long, stressful process of elimination to get it working, even to the extent of using my MacBook as an external drive through target disk mode!
It turned out to be my iMage USB camera. Even after successfully installing Windows I have to disconnect it before using Bootcamp.
I Hope this helps.

Hello community I have a big problem with my iphone 4s as precent problem with wifi and ios7. my phone was a champ when actualize this, eh degrade searched everything but I can not because I get the error 3194. I want a solution please

Hello community I have a big problem with my iphone 4s as precent problem with wifi and ios7. my phone was a champ when actualize this, eh degrade searched everything but I can not because I get the error 3194. I want a solution please

This support document http://support.apple.com/kb/ts4451 relates to the 3194 error. Generally this error has to do with trying to install an iOS that is not the most current. Maybe you tried to jailbreak the phone, or downgrade iOS? Any of this apply to you?

Problem With WIFI and Bluetooth

HI Im Vikram
Recently i upgraded to IOS 8.1 so problem started with WIFI and Bluetooth . When i was in IOS 7.1.2 everything was fine with my device. so what should i do now ?? Is there any possibility to downgrade to IOS 7.1.2 ??

Hi Rainxl,
Unfortunately the BIOS is unable to be resorted to back it up, as the issue persists. I suggest contacting our Technical Support Team for all the information required and to get the details of the nearest Authorized Service Center to get the issue analyzed.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I am facing problem with wifi and cellular after update Apple iOS 8.0.2

How can we resolve the issue with wifi and cellular reception after update the iOS 8.2 on iPhone 5s 32 GB

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

Upgrading to Vista with Boot Camp 2.1 and XP SP3

Hello
I decided to buy Vista to see for myself how it works. It hasn't come in yet, but I want to know if I can upgrade to Vista when I have Boot Camp 2.1, and Windows XP Service Pack 3.

I have upgraded to Vista SP1 from XP SP3 successfully on one of my macs. Once Windows is loaded and up and running then you can upgrade it just like you normally would when running a Windows based PC.
Axel F

I can access internet via boot camp with windows 7, but not when I use the Mac w/Mt Lion side. Thanks for any tips!

I'm using a 2012 Intel-based iMac with Mt. Lion and Windows 7 with Boot Camp. I used to be able to access the internet on both sides. Now, my only internet access is through Boot Camp. At one point, access was unable on both sides but IE in Windows 7 automatically diagnosed the problem, changed some settings (which I don't know) and I could access the internet on both sides . . . for a while. Now, I can only get online in Boot Camp. Since IE detects no problems it doesn't apply the fix as it did before. Does anybody know what's going on?
I should mention that I installed Boot Camp because there is no Mac version of the software (VantagePoint) I need to use (duh). I wanted to be able to use the software w/o rebooting all the time so I installed Fusion. Of course, I didn't ask the VantagePoint techs if this would solve my issue. It didn't - VantagePoint won't work with Fusion, but it will with Parallels. So I installed Parallels and imported Boot Camp. Apparantly, it was not set up properly, I'm getting all kinds of errors reported in Console (e.g. "Found cross-bounds GPT partition. GPT disk detected," mdworker cannot talk to sandbox, etc.). The VantagePoint techs say the first step in a VM retry is to regain internet access to the Mac.
Anybody who can help will become my new best friend. Thanking you.
Message was edited by: Marmadukemark
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Mark-PC
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Bluetooth Network Connection 2:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network) #2
   Physical Address. . . . . . . . . : 44-2A-60-CF-D0-93
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection 2:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
   Physical Address. . . . . . . . . : 32-9A-DD-9F-1D-FF
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection:
I neglected to add that I'm using using ethernet with a cable modem. I'm the only user, so it's not networked for others. Below is the report that was generated with respect to the connection problem - when Boot Camp could not access the internet.
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
   Physical Address. . . . . . . . . : C8-2A-14-1B-EE-D1
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::a47a:3af7:72e6:f899%11(Preferred)
   Autoconfiguration IPv4 Address. . : 169.254.248.153(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   DHCPv6 IAID . . . . . . . . . . . : 348662292
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-CD-DA-86-10-9A-DD-9F-1D-FF
   DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                       fec0:0:0:ffff::2%1
                                       fec0:0:0:ffff::3%1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wireless Network Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Atheros AR938x Wireless Network Adapter
   Physical Address. . . . . . . . . : 10-9A-DD-9F-1D-FF
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter 6TO4 Adapter:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft 6to4 Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{077AEF3E-6752-42C5-A037-9FB69A17CB27}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{83EF0082-ADD7-4283-8303-9133BD882E39}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{22AA845D-6210-4549-AAE5-3D8917BA7286}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{D364C869-F7DD-4F9A-ADBA-7EBF53DD21D2}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Are you using a MacBook Pro? Is everything installed on the same drive?
I would love to know how that install was performed. When I install Windows under boot camp, my MacBook Pro drive ends up with 4 partitions: Mac, Mac Recovery, Windows, and a small partition that I believe is used by boot camp.
Installing BitLocker on Windows requires the creation of a new small partition that Windows will boot off. The small partition is unencrypted, while the primary Windows partition will get encrypted. The following post discusses the maximum partition issue: https://discussions.apple.com/message/22753791#22753791
Has anyone installed Windows through boot camp on it's own drive, and if so, can BitLocker be installed on that without reaching any partition limit? I'm assuming that's possible, but would like to know before I spend hundreds on new hardware.

Cinema DIsplay sleeps when I use Boot Camp with Radeon 5870 through DVI connection

I just created a bootcamp partition on my Mac Pro (1,1) with Radeon 5870 and XP Professional so I can play Train Simulator 2012 with maxed out settings. Well after hours of installing Windows XP and updating it (via Parallels so I could do other things while waiitng for Windows) I got Train Simulator 2012 installed, Windows XP Professional fully upto date and reboot to bootcamp. I see the Windows screen and then my monitor goes to sleep (best guess). I am using an Apple Cinema Display 20" and is of course connected to the DVI port. One guess (and I hope I am totally wrong about this) is I think I remember reading the DVI port id display 3 not 1. I hope this isn't the problem (requiring me to buy a $40 Mini Display port for DVI adapter.
Any ideas as to why this is happening? I was so looking forward to playing Train Simulator with maxed out graphics via Boot Camp with the Radeon 5870 1GB. Don't get me started as to why my line out is not being detected by XP Pro.
I also have the latest Bootcamp drivers for XP (3.2).

Never used XP and on Mac Pro I wanted to use all 4-cores and more than 1.9GB RAM but often it seems that in the past and with Fusion anyway you would need to install Windows updates and drivers natively not thru or in the VM.

Driver issue FIXED in Vista / boot camp with new, unibody macbook pro!!

Hay people, I found a fix for the freezing issues with Vista running in Boot camp with the new, unibody Macbook pros. The driver for the 9600M Gt is no good if you install it from the Apple 2.1 version driver disc (Mac osx disc)for some (most) of us.
I needed to go to Nvidia's site and download the one from DECEMBER 08. If you click the "download drivers" tab on the site, scroll past the current driver it wants you to look at (go to the near bottom of page), click the archives, and input your OS version. Also input "Gforce" and "M" series when needed. It will give you a choice of two drivers. DO NOT CHOOSE THE FEB 09 Driver. Thats the BAD driver for most of us. Choose the DECEMBER 08 driver. Download and enjoy. Be sure to roll back the VGA driver (or the current driver) first before you install this. It should work.
I've been through the ringer with this for weeks now and have even tried to take my MBP back to swap for a new one. Apple wont have any of that so I thought I was SOL. Not quite. This DOES work for me with Vista. It also works for Windows & if you have it handy.
By the way, I am posting this for people who HAVE HAD THE FREEZING problems, not for people who haven't. Apparently there are some out there who are running Vista just fine on their unibody MBS's. Most of us are not.
Cheer's-----Seattle, where the evil empire looms dark

This never worked. I sold that machine and got a new 17" unibody. IT, by the way, works just fine. I KNEW it was that **** 15'. It took 30 more seconds to boot up I found out also.

Windows 8 Problems in Boot Camp

I have recently installed Windows 8 in Boot Camp with my Mac. I also installed the Boot Camp special hardware.
But recently Windows 8 started to freeze suddenly, make loud beeping nosies which require me to force shut down.
Is this a problem with Windows 8, or is it the Boot Camp software?
I really do want the answer quickly. This is becoming an increasing problem.

I would point out as I did above:
I also installed the Boot Camp special hardware.
you are running Windows.
Boot Camp (Assistant) partitions the drive, and in Lion downloads Windows Support software.
Lion 10.7.4 w/ Boot Camp 4.01 is the better choce.
With Windows you will always be on your own and need to update drivers.
Apple isn't going to until after 8 is either released or is finalized, and maybe only for Mountain Lion (guess based on past)

Boot Camp with Win 8 Can't See The USB External Drive [MBR with NTFS, Fat32, HFS Partitions]

Hi. When I boot to Boot Camp with the latest Apple Windows Support drivers can't see my USB Flash Drive, DVD and OS X volumes but not my USB external drive that has an MBR partition scheme (using iPartition from GUID) and in there it has different volumes [HFS when I boot to Snow Leopard, Fat32, NTFS]. What can I do with Boot Camp to make it see my USB external drive and why isn't it seeing the USB when it can see the USB flash drive both use USB?
Thank you in advance.
God bless.

Buy Paragon NTFS for OS X $20.

Can Tiger run a dual boot system with the two internal hard drives

Can Mac run a dual boot system with the two internal hard drives both running Tiger?
Dual 2.5GHz G5
I am wanting to use one hard drive with Tiger to run my graphics stuff and then reboot and use the other hard drive for video.

Yes, you can set that configuration up.
(26293)

Keep getting error occurred while formatting the disk using boot camp with usb

So I keep getting the above error when trying to use boot camp with a USB drive. I have tried with more than one flash drive, all formatted to FAT32, multiple isos, both ripped right from a windows 7 ultimate dvd and downloaded, and I have made sure the iso was unmounted. I have also tried all different combinations of checking the options in the boot camp assistant menu. Any ideas on how to get this to work?

I was mistakenly thinking of the Fat16 limit. That is my mistake.
When bootcamp assistant failed to create the USB from my iso disk (with no explanation), I decided to experiment a little with the dd and cp utilities. dd failed, and cp told me the install file was too big.
The install.wim on my iso is 4,351,019,025 bytes. So even if 4GB is the file size limit, it is too big. 4GB is 4,294,967,296 bytes if I recall.
If I am still right about the file size, smaller editions of windows 7 would be able to fit on the flash drive, or people can have an actual DVD with windows 7 and install from there.

Can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition?

can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB external hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition? I now want to add another 500 GB?

Yes. Windows supports external USB drives.

I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone.

I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone from this ipad. Everytime I try to send a message to a person that does not have an Apple product ( Iphone or Ipad ) it comes up saying contact is not registered for iMessage and wont send it. I can only send them a message from my iPhone 4 instead. Do I have to install a new App from the App store to send these non iMessage cell users a message?

FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

Problems in Boot Camp with Wifi and internal speakers

Similar Messages

Maybe you are looking for