Problems in changing the text of the id attribute of the components

Does anyone have any way to adjust the exchange component of the ADF id?
I am making an example system which has two pages and has a flow (control flow). The following problem is happening, she was with them at work and then I take the test to change the id of a text label to another did not work anymore after that my flow, it seems that she is no longer seeing this page.
NOTE: also edited the file. Java page and checked the pageDef it too.
Has anyone managed to change the id and leave the page 100%

Your question is not clear, at least I don't understand it.
What do you mean by ...exchange component of the ADF idWhen you open the page in jdev, switch to source mode: do you see any errors or warnings (check the right hand gutter for red or orange marks)?
Which jdev version do you use?
Changing the id of a component works for me as long as the id is not used elsewhere on the page (e.g. as ppr target).
Timo

Similar Messages

How do i change the text in a submenu diffrent than the page name? I want it wrap into two lines

How do i change the text in a submenu diffrent than the page name? I want it wrap into two lines or be a diffrent title but i can't figure out how to make any changes to the text.

Hello,
Text in Menu/Submenu canno tbe changed while using menu widget. However, if you use the Manual Menu option, then you can create your own Menu and add the hyperlinks according to your requirement.
To create Manual Menu, please follow the steps below :
1) In the Widget palette, go to "Menus" click and drag "Vertical/Hrizontal" into your artboard/workspace
2) Click on the widget itself to a blue arrow appears to the right
3) There is a drop down called "Menu Type" set it to "Manual" (as shown in screenshot) :
4) Now You can create your own Menu and add your own text and hyperlink to this Menu.
Hope this helps.
Regards,
Sachin

How to change the text of item's displaying in the folowing ALV.

Hi Experts,
I want to change the text of item's displaying in the folowing ALV.
Go to ME23N->Click 'Messages'->Click 'Further Data' -> Click 'Displ.Originals'.
Here one small ALV grid is appearing.
Currently it is showing same name's under the 'Title' column of that ALV. My requirement is to change the text coming under the column 'Title' in that display.
Can any one throw some light in the issue.
Thanks&Regards,
Anversha

Hi Anversha ,
i think you need to use Enhancement point for it.
check the program DV70AF0A-->ARCHIV_ANZEIGE(Subtoutine).
i had similar kind of requirement ,while attaching the supporting documents to FI document , i need to update title field with File name , so i used EP and BADI to do so.
regards
Prabhu

The text "Remove" is not appearing in the remove button of Bookmarks.

Hi,
The text "Remove" is not appearing in the remove button of Bookmarks. My problem is the same as mentioned in this question.
https://support.mozilla.org/en-US/questions/1017302
The solutions suggested on the link don't seem to work. How do I resolve this? For me this problem is persisting everyday.
Thanks

You already tested in Firefox's Safe Mode and that did not make any difference?
Can you associate this problem with any software changes, such as upgrading from Firefox 31 to Firefox 32, or updating an add-on, or Windows, etc.?
Have you noticed problems with any other dialogs or menus?
Occasionally a corrupted settings file may cause issues with dialogs. This file also stores toolbar customizations. You can rename the file and customize from scratch.
Open your current Firefox settings (AKA Firefox profile) folder using either
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button
Leaving that window open, switch back to Firefox and Exit, either:
* "3-bar" menu button > "power" button
* (menu bar) File > Exit
Pause while Firefox finishes its cleanup, then rename '''localstore.rdf''' to something like localstore.old
Start Firefox back up again. Any improvement in the Edit Bookmarks dialog?

When I copy and paste text in facebook, the text looks fine until I hit 'share' or 'comment' to submit it. Firefox then adds indiscriminate line-feeds within the text and it looks nothing like the original text. This does not happen in Safari. (Mac OSX 10

When I copy and paste text in facebook, the text looks fine until I hit 'share' or 'comment' to submit it. Firefox then adds indiscriminate line-feeds within the text and it looks nothing like the original text. It makes it very difficult to read and awful to look at.
This does not happen in Safari.
(Mac OSX 10.6.4 with Firefox 3.6.6).
== URL of affected sites ==
http://

Same problem, 3.6.8 and previous recent versions. I never thought to try another browser but I just pasted into IE and it worked fine. I copied from Firefox to IE and it worked as well. It's just when you paste into Firefox that you get the weird line breaks.

G'day, i am trying to type into an adobe document using the typewriter function. However everytime after i type the text vanishes. It is almost as if the text is white and vanishes into the background. However this is not the case as the works are not vis

G'day,
I need some help, i am trying to type into an adobe document using the typewriter function.
However every time after i type the text vanishes. It is almost as if the text is white and vanishes into the background.
This is not the case as the works are not visible regardless of the background color.
The text box remains available and can be edited if clicked on, also if i double click on it the typed words become visible and editable, however once i close the box i cannot see them on the screen.
I would appreciate any help i can get, i cant seem to do anything using properties or view.
Thanks
Tiernan

Hi Sara,
See response to your questions below:
1.     Are you running into this issue in a specific PDF, or in all of them?
A.     All of them
2.     What version of Acrobat are you using (and, are you on Mac OS or Windows?).
A.     Using Acrobat 10.0\Acrobat on Windows
3.     If you look at the text properties on the Tools panel (under Format), what color is the text swatch?
A.     Test swatch for the text is black
4.     What happens if you change the text color?
A.     Nothing.
I look forward to hearing back from you.

In ICal is there a way to see all of the text in all day events on the month view of the calendar. Seems to wrap text only if there is a time on the event

In ICal is there a way to see all of the text in all day events on the month view of the calendar? Seems to wrap text only if there is a time on the event

The paths won't agree on the two OSs so a simple XML import isn't likely to work.
See Sync iPod/iPad/iPhone with two computers and, if needed, Make a split library portable. The techniques in the first link will work when moving the library between Windows and OS X as long as the library is "portable", but iTunes takes quite some time checking the database when the library is opened under a different OS.
tt2

How can i remove the phone number from the text messages that i receive in the notification center

how can i remove the phone number from the text messages that i receive in the notification center?

You choose whether to see text messages in Notification Center or not. If you elect to see them, they will display the phone number (unless they are from a contact in your contacts list).
You can choose not to see them at Settings > Notification Center > Messages.

Hello, I have an iPad Mini WiFi Cellular white 16Gb and I puted my sim inside it but, I cant read the text message that I recieve in the Sim. What can i do? And I can't put the sim in a cellphone coz it doesn't recognize it. Please help me! Thank you.

Hello, I have an iPad Mini WiFi Cellular white 16Gb and I puted my sim inside it but, I cant read the text message that I recieve in the Sim. What can i do? And I can't put the sim in a cellphone coz it doesn't recognize it. Please help me! Thank you.

iPads do not do SMS.

TS1702 In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

Does this occur in all of your Pages documents? Are you certain that you haven't formatted the type to run flush right? (Align right I mean - sorry old typographer lingo). Look at the ruler at the top and check the Align setting.
Have you tried quitting Pages completely and the restart the iPad?
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.

What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.

tacbob wrote:
Are there any tutorials? I cannot find anything close.
http://itunes.apple.com/de/podcast/write-on-effects-in-motion/id287113664?i=4883 4057
The MacBreak Podcasts are an excellent source of info!
Have a look on the others ..

My phone randomly doesn't ring when people call and not sound the text alert. I checked all the settings and them seem to be correct. Anyone know how to fix this?

My phone randomly doesn't ring when people call and not sound the text alert. I checked all the settings and them seem to be correct. Sometimes it rings, many times it doesn't. I have missed several calls. Same with texts. Anyone know how to fix this?

Symptoms
No ringer sound
Go to Settings > Sounds > Ringtone and select a ringtone. Does the device ring? (YES: Issue resolved) (NO: Go to step 2)
Go to Settings> General> Reset> Erase All Content and Settings. Warning: This will delete all user data on the device. Verify that you have a backup before proceeding. Go to Settings > Sounds > Ringtone and select a ringtone. Does the device ring? (YES: Issue resolved) (NO: Go to step 3)
Restore device using latest version of iTunes. Go to Settings > Sounds > Ringtone and select a ringtone. Does the device ring? (YES: Issue resolved) (NO: Contact Apple for service options)

How to change dynamically text label at run time in the forms

Hi,
I am having a form in which i want to change the text label dynamically. I mean when a certain condition match then text label should be change and when condition does not match then the text label should reamin as it is in the same form.
plz help
thanks in advance
azhar

Hi,
Use this code to change the label at run time.
set_item_property('deptno',prompt_text,'pagal dept');
Prompt_text is used for changing label at run time.

When you create a link to a web page in numbers and we export the PDF file, the link is offset by 3 rows. Example: if I put a link on the text in cell A1, I found the link A4. In fact, this feature becomes unusable. How can we solve this problem? Thank yo

When you create a link to a web page in numbers "Mavericks" and we export the PDF file, the link is offset by 3 rows. Example: if I put a link on the text (with Cmd-K) in cell A1, I found the link A4. In fact, this feature becomes unusable. How can we solve this problem?
Thank you.

Hi again Raja!
I did as you recommended and installed HTTPWatch and below is the outcome of that program. It is the exact string with the only exception of obfuscated servernames and portnumbers. The last part that begins with "sap_ep_baseurl=" makes me suspicious, is that part really correct? It looks like it's lacking things.
Best regards
Benny
http://<server:port>/sap/bc/bsp/sap/Z_PURCHASE_REQ/process.htm?
sap-syscmd=nocookie&sap-client=200&sap-language=sv&style_sheet=
http%3A%2F%2F<server>%3A<port>%2Firj%2Fportalapps%2F
com.sap.portal.design.portaldesigndata%2Fthemes%2Fportal%2Fsap_tradeshow%2F
controls%2Fcontrols_ie6.css%3F7.0.10.0.0&sap-cssversion=7.0.10.0.0&sap-tray-type
=null&sap-tray-padding=null&sap-accessibility=&sap-ep-version=7.00.200611091758&
sap_ep_version=7.00.200611091758&sap_ep_baseurl=http%3A%2F%2F
<server>%3A<port>%2Firj%2Fportal&matnr=9780198603641

The icons in the bookmark tool bar are blank and the text that use to be below the icon is gone. I now have to cursor over the blank icons to see the text and the one I want. Can the icon/text customization be returned?

In the Navigation Toolbar, the icons "Back", "Forward" etc. show the small icon and the descriptive text below the Icon. My Bookmark Toolbar use to have the same icon/text format but at some point, possibly a browser update, that changed. Currently, I do have a visible Bookmark Toolbar BUT the icons do not show the website icon, as previously, and the text below each icon is gone. I an cursor over each icon and the text becomes visible next to the icon. This is a bit of a pain to find a bookmark. Can I do a customization to return to the icon/text format.
Was this changed because browser users requested this option, or was it an internal decision.? If the later why make such changes when not requested?
Ed Sander

That wasn't a change in Firefox. It sounds like something is broken in your Firefox installation, or you are misunderstanding the different between the Bookmarks Toolbar and the other Toolbars.
In the Bookmarks Toolbar the text appears next to the website icon, not below the icon as with the other two Toolbars, and it's not switchable between text and no text as with the other Toolbars. With both the bookmark icon and the Bookmark name missing, something is broken in your installation. You need to do a little troubleshooting.
Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]
If your problem isn't related to an extension, your bookmarks data base file (places.sqlite) is probably corrupt. 
http://kb.mozillazine.org/Locked_or_damaged_places.sqlite 
Be aware that if you delete the "places.sqlite" and similar files, your bookmark website icons won't automatically appear (the JSON backups don't have that icon data) when you restart Firefox and the places.sqlite is rebuilt using the backup data file, but the icons should be saved the first time each bookmark is used for the first time.

How to get the text to appear on top of the image

I am using the following piece of code to add a label to a JPanel -
JLabel label = new JLabel();
        label.setIcon(new ImageIcon("object.gif"));
        label.setText("An object");
        label.setBounds(xCoordinate, yCoordinate, width, height);
        display.setLayout(null);
        display.add(label);The problem is that the image is being placed over the text so I cannot see the text, does anyone know how I can fix this?
Thanks.

Try setIconTextGap in JLabel. Or, maybe your bounds
are too small.
JLabel also has a constructor that takes both the
icon and the text at the same time.I know my bounds are large enough because if I comment out the add image then I can see the text and there is enough room for it.
I don't think setIconTextGap can help me because that will just move the position of the text in relation to the image but I would like it to be directly on top of the image.
I tried the constructor but that is causing a java.lang.reflect.InvokationTargetException which is fairly strange because the method that im working on does not use reflection or change anything in the method which does.

Problems in changing the text of the id attribute of the components

Similar Messages

Maybe you are looking for