Problems in connecting to canon IR C 3220

Hi guys.. have 2 canon printing machine with me one is canon image runner 6000 and one is a IR C 3220..tried almost a million times to connect to these machines but no luck at all..Can anyone guide me from the scratch to setup these machines to my mac book pro OS X Marveicks. I tried downloading the respective drivers for the machine also but all in vain. it will be a great help..
Thanks in advance.. Cheers!!

Hatim Khambati wrote:
1) after connecting the cable to my mac and the macine when going into the network setting what should i select in it.. should I go for DHCP or DHCP with manual address or BootP or manually.
If you are connecting the Ethernet cable from the printer directly to the Mac then you will have to set a manual IP address on the Mac's Eithernet port and on the Canon.
If the Canon and the Mac are connecting to a network where there is a DHCP server or a router that can provide IP addresses to connected devices, then you can set the Canon to DHCP.
Hatim Khambati wrote:
2) Secondly what ip should i enter in the add printers and scanners part, and what software should i be selecting in the part where it says USE
The IP address that you enter will be the IP address used by the Canon. So in the scenario where you set a manual IP address in the Canon, then you would enter this IP address in the Printers & Scanners > Add Printer > IP window.
As for the Use menu, if you have installed the Canon PS driver, then for the C3220 you would select the entry shown as "Canon iR C3220 PS"
Hatim Khambati wrote:
3) Is there a different way to install the driver in a mac. because i downloaded the driver and installed it, but how do i know if the driver is being used or not
You can check if the Canon PS driver has been installed on the Mac by navigating to the Canon folder located in Library > Printers. Here you should see a folder called "CUPSPS2".
If you are not sure how to get to the Canon folder, with Finder open click on Go then Go to Folder. Then type (or copy) the following
/Library/Printers/Canon
and then click the Go button. This will take you to the Canon folder and here you should see the CUPSPS2 folder.
Hatim Khambati wrote:
and regarding the metal box there is nothig that is hanging tho but there is a slot where i can connect the machine tru ethernet whcih is at the left side of the machine.
Okay. That confirms you are using the internal Canon print controller and not the optional imagePASS print controller. So you have the correct driver. You just need to get the copier configured with an IP address that is correct for your network and then you can add the printer.

Similar Messages

Problems to connect camera to mac osx

Hi
I have lately, problems to connect my Canon D 7 camera to both my macs. There was no problem with that before.
I have a feeling that the problem appered when I was to hard deleting duplicat fils with a program called whatsize.
In the same period i also get problem with my Menu line, it crashes all the time. exacly the same problem both on my iMac an MacBook pro.
Tryed to install lion( Not clean install but) Nothing sems to work. Hope there are people here who can give me good tips where to start.
Camera show on an windows 7 computer, so there is no problem with camera.

Try this.
"change your user login setting to AIM, do not use .MAC setting
in user name field, type your full user name. example : [email protected]
it will not appear the password incorrect error."

Lost connectivity to canon mp870 scanner

lost connectivity to canon mp870 scanner

The scanner component of the Canon AIO's use Bonjour to advertise themselves on a network, while the printer component uses a Canon proprietary protocol called canonijnetwork to do the same. Normally when you select to add the device to your Mac the scanner component appears first in the Default Add Printer view, showing as Bonjour Scanner in the Kind column. The printer component takes a few seconds longer before it appears. For you to see the printer component and not the scanner via Bonjour then it would suggest that the Bonjour protocol is not reaching the Mac. So to check this you can open Safari and select the Bookmarks icon. With the Bookmarks sidebar no in view you can select Bonjour and then look at the right pane. If the Mac can see the MX870 it should be shown here. So do you see the MX870 in Safari?
If you don't see it then try restarting the Mac as this can sometimes help. If it is still not visible in Safari then check your firewall setting (System Preferences > Security > Firewall). If it is ON then try turning it OFF. The firewall shouldn't stop the Bonjour protocols if it is ON but it has been known to cause some issues in the past. If the firewall is not OFF and still the MX870 is not shown in Safari then either something else is blocking this or there is a problem with the MX870

Problem in connection from SAP to XI

Hi Guys,
I have problem to connect from SAP to XI. We have existing SAP R/3 (IS-H) and we newly installed XI. We decided to use ABAP proxy to send data from SAP to XI. When I go to SPROXY system showing No Connection to Integration Builder. Please kindly advice what configuration we need to in SAP side in order to connect XI.
Its Very Urgent. Please advice me.
Thanks in Advance.
Regards,
Anil.

Anil,
could you please have a look to SAP Note 689847 - XI 3.0: SPROXY - No connection to the Integration Builder
Cheers,
-Sunil

Problem with connecting and syncing (quicktime.qts)

Hi,
I have a problem with connecting and syncing my Iphone to itunes.
iphone alone on PC -> uploading files (fotos) is possible
itunes starts normaly, if iphone is not conected.
if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
ModVer: 7.65.17.80 Offset: 00909a47
i test different things...
- used another USB-port
- used another PC
- used macbook of my wife instead PC
- deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
- use another USB-Cable...
I'm resigned, Please help me..
Tom

AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?

HT204053 I have a problem. I bought Pages and Numbers for my iMac and so far everything was OK. Suddenly i have a problem with connection to iCloud. Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded in iCloud.

I have a problem.
I bought Pages and Numbers for my iMac and so far everything was OK.
Suddenly i have a problem with connection to iCloud.
Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign (small shape of iCloud), that they are waiting to be uploaded to iCloud.
I think the iCloud is OK.
i can see and manage documents in iCloud. i can create them on iPad and see them and delete them in iCloud.
But not on iMac.
i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….

I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!

How can I connect multiple devices to Mac mini display port? I need to connect a Canon 5D to my Mac and display the result on a VGA video projector. I am using mini hdmi to mini display for the camera. Can I connect the VGA to any other port?

Hi there I am connecting a Canon 5D to my laptop trying to use it as a webcam trough camtwist.
At the same time I need to output the streaming to a videoprojector.
The cam is connected to the mini display port do there is no port available for the VGA cable anymore.
Do I need to use a different port for the projector? Should I buy a video card?
Can't connect the camera via USB as that is too slow and it will freeze.
Many thanks for all your help
Best
Faeve

You might do better on a forum other than this one, which is "Using iPhone"

How to connect a Canon Elura 50

I have a Canon Elura 50 (NTSC Digital Video Camcorder) circa 2003. I know I have connected it in the past to a former version of iMovie, but have forgotten the magic.
Now that I have iMovie 11 and a new iMac (late 2012) with Tunderbolt connection, can I connect the Canon for A) live video to use with Skype or FactTime, and B) to download movies recorded with this camera?
The Elura 50 has both USB and DV outs, but when connected via USB the camera appears to be invisible to iMovie, FaceTime and Skype. I haven't yet tried the DV to to Thunderbolt yet (or to Firewire via a Thunderbolt adapter.
(In fact, I see no way in preferences to select an experior camera for FaceTime at all. I also find no controls in System Preferences for adding second cameras to the iMac.)
Can anyone point me to specific or even general information about the proper connections for a second camera? Help with connecting my Elura 50 would be greatly appreciated.
Thank you.

Hi
I haven't yet tried the DV to to Thunderbolt yet (or to Firewire via a Thunderbolt adapter.
But that is the way to do it if Your Mac don't have a FW400 or FW800 connector.
BTW - the FW400 to FW800 converter works BADLY and is not recommended from me.
Your Camera has
• USB - to transfere still Photos from it's memory-card to iPhoto (or to Your Mac in other way)
• mini FW (FW100 - 4-pin) connector - to be able to Export DV movies to Your Mac and iMovie or FinalCut or iDVD or Adobe Premiere etc. There are no way around FW-Cable.
Yours Bengt W

I have problem to connect iChat. Sometime work and some time not working. When it was not working, there was a message on screen and said the mobile be server was not working. I needed to turn off computer and restarted the computer. Then it might. work

To whom it may help,
I use my iChat to do video chat with my granddaughter. I used to do iChat without any problem to connect with her in New York. However, After Mobil Me account closed, I accounted connection problems frequently. Sometime, I had to turn-off my computer then re-started the computer to make it work again. . When I had this problem to connect on iChat (the Mac did not allow me to choose "available"), the poped out window message said that " the iChat lost the Mobil Me account [email protected]" "The server connection was unexplected disconnect". Do you know what is my problem? My Apple ID for iCloud and previous Mobil Me account should be [email protected] I am no longer using [email protected] for Mobil Me e-mail address. My current iCloud e-mail address is [email protected] is no longer of using [email protected] account for my e-mail. If this is the problem, please let me know how to remove the [email protected] account from your system. Thanks!
David

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

I can't connect my canon mp160 to my new apple iMac desktop. It just won't print although it comes up as the printer. there is no driver for this from canon who states that I probably don't need a driver for this

I can't connect my canon xp160 to my new IMAC. It does recognize it but won't print. there is no driver for this as per Canon and they state that I may not need one. thanks!1

If you want to print, then you will need a printer driver. There is no printer driver available from Apple for the MP160. And the last driver that Canon released for this model was for OS X 10.7. You may be able to install this 10.7 driver, although it is not digitally signed so Gatekeeper will block the installation. To get past Gatekeeper, you can hold down the Control key and click on the installer. A pop-up menu will appear. Select Open. You will then be given the option to install the old driver.
With the driver installed, add the printer via Printers & Scanners and see if you can print.

Problem with connecting to a website. Just purchased a new iMac with Version 10.10.2 Yosemite. Once in a while I have trouble connecting to a site. It takes forever. Is this an issue with Yosemite or my internet service?

I purchased this iMac in Feb. 2015. When I try to connect to a web site using Safari or Google Chrome I usually have no problems getting connected to the site. But maybe once a day I will try to connect and I will see the blue progress bar at the top of the screen showing it is trying to connect and then it just stops. It may take a couple of minutes before it connects to the site.
Would this be a problem with OS X Yosemite Version 10.10.2 ? Or would this be a problem with my internet company?
Thank you,
Laurie

Hi lauriefrommi,
Welcome to the Apple Support Communities!
i understand that you have some intermittent webpage loading issues while using Safari on your Mac. In this situation, to ensure that Safari is working as it should, I would suggest reading over the attached article and using the information to make sure Safari has no unsupported third-party add-ons.
Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues - Apple Support
Best regards,
Joe

Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks Portozzygirl

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

Connecting the canon SX50 to HDTV for video playback???

Connecting the canon SX50 to HDTV for video playback???
ok, Got this Camera, like it, except for a few confusing issues. I was told, in order to playback HD video onto my HDTV Samsung, with an HDMI4 on the left side of the TV, all I needed was a HDMI to HDMI cable.
(#1) Shut off both TV and camera, plug the cable into this HDMI plugin, turn on the TV and Camera power supply, and it should recognize, then start paying.
Well, I did it both ways, (#1) shut off,then turn on, and (#2) I just inserted the camera's HDMI to the HDMI4 while both were on, and tried opening up the Samsung's' Tools >Inputs, etc, and still nothing!
Is there an easy way to accomplish this?
The second issue i'm having , is how to shut off the slow motion playback, when viewing the videos, which were not recorded in slow--mo, and it's frustrating trying to playback in normal speed, but instead it plays in slow-mo.
I'm not quite sure I'm recording in full HD...The payback is only 60i

Thanks grazie!
Well, i accomplished most of that and at least got the video on the display (Samsung Anynet HDMI3) But no sound!
I was also able to control the SX50 TV Display with my samsung remote, kool.
As far as the playbgack volume, I checked the camera, I did notice the OPERATIONAL SOUND was off, but when I played back the video on the camera itself, i did have volume.
On that subject of Slow motion videos, if i'm watching each video, then see one playing back in slow-motion, does that mean i actually filmed it in slow motion, without knowing? ( i can send it through Pinnacle Studio 15HD and speed it back up, but theres no background volume anyway) if i did unknowingly videotaped in slow motion, i bettter be more observant in the future.
I'm going to increase that ''Operational sound'' on the tools / Camera and try to playback to see if I have any sound.
I have a Yamaha 7.1 reciever, and TV, BD player,Time-Warner cable all is connected to this receiver....I was pushing all buttons for inputs to see which one would work for sound with video, but could not find any. Thanks, or grazie grazie!

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported"

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
What I can do to fix this problem? Thank you.

I would try using another cable you can likely borrow one to test from somebody
if it's the same then likely the connector in your iphone have been damaged

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

Problems in connecting to canon IR C 3220

Similar Messages

Maybe you are looking for