Problems in connecting to windows domain from a L3 switch

Hello,
I have a Cisco L3 switch with two subnets on that switch. I dont have vlan for each subnet, all i did is confiugred two IP's for the single vlan, meaning the switch will have a IP in the server subnet and a secondary IP in the client subnet range. For the client subnet, the secondary IP will be the gateway and for the servers, the primary ip will be the gateway.
The issue is the Domain controller is in one subnet and the clients are in another subnet.
Because of this they are not able to see each other and the clients cant join the domain. Also the DHCP is not working,meaning clients are not getting an IP from the DHCP server. The scope is set to the range of Client IP range.
The only way to fix this, i have given dual IP's to this DC and then the systems clients started joing the domain.
I dont want to have the server with dual IP's.
What is the best way i can ensure that my Domain is in the server subnet and the clients who are in client subnet can join them over the Cisco L3 switch as both the server subnet switch and the client switch connected to the L3 which acts as the core switch at the site.

hello,
Thanks for your reply.
Sorry that i didnt tell earlier that every thing works fine except the DHCP/Domain issue. This shows routing is ok.
Also i have complaints saying that when i have a user setup with a client ip, the performance is very slow, the moment i change that to a server IP range, the performance is very good.
The pity here is both for the client ip range and the Server IP range, the gateway is the L3 as i have configured dual IP's for that vlan in the L3, one for the Client IP range and the other for the server IP range.
The DHCP server will start issuing IP's to the client when the moment i change the IP of the DHCP server to the same range as that of the scope, i mean when i assign an IP to the DHCP server in the client IP range.
Both the DHCP and domain are the same machine and hence i have both problems ie DHCP not working and clients not able to join the domain.
think it should be some kind of broadcast issue here since both the DHCP and the Domain uses broadcasts.
I have tried using ip-helper address as well and still no luck :(

Similar Messages

Can't connect to server domain from server

Hi,
Since 2 days ago, i stop being able to connect to server domain from its own browsers. I'll try to explai:
I've my server up and running, you can check here: http://www.servidorlocal.com. I'm able to connect to this domain from all computers inside network and from my IOS devices over 3G.
The problem is when i try to connect from the server itself (safari, chrome, etc) always give me an error telling that cannot find the host.
Trying to connect over localhost or 127.0.0.1 it also works, but with the domain didn't work...
I cant understand why.
Hope someone here can help me solving this issue.
Regards
Mozack

OK,
I've solved the problem. If someone with the same problem, here what i do:
1 - System > Preferences > Network
2 - Choose from the list the network adapter that server uses, in my case is the LAN adapter.
3 - Click Advanced
4 - Re-configure the LAN connection (even with the same data).
5 - OK, server running locally too.
Thanks

Connecting to Mac bound to a Windows domain from Windows

I have a 2010 MBP running OSX 10.6.7 which is "bound to the [my company name] domain" (that's how our corporate IT department describes it; not sure if this is technically accurate). We have a mixed Mac/Windows environment but are predominantly Windows based (I log onto my Mac using my Windows user id/password).
I'm trying to access shared files on this machine from a Windows 7 machine on the same domain.
Before I had my Mac bound to the Windows domain, I was able to access my shared files by following the instructions in OSX help (I enabled a shared folder, added my Windows username and password as a local admin on my Mac, turned on SMB access for that user, and all was good).
Now that my Mac is bound to the domain, I can access the directories associated with the local user account I have on my Mac by connecting from my Windows machine as a different user and then entering the account name and password associated with my local user on the Mac.
I can't access the directories associated with my Windows account.
I tried adding a local user (sharing only) to my Mac with the same userid/password as my Windows account, but this prevented me from logging into my corporate network from my Mac, so I deleted this local user.
Any assistance greatly appreciated.
thanks.

Partial success: after some experimentation with my local IT guru, I'm now able to access my home directory (which is tied to a network account, not a local one), but I can't access it using my Windows user ID/password.
Here's what we worked:
Confirm sharing is enabled for desired folder, SMB sharing is turned on, my local user account has access to this folder (in the users section of the file sharing dialog), and this local user account is enabled for Windows sharing. [This is no different from what we had previously done]
Get Info on the same desired folder and give read/write access to the folder (help doesn't mention anything about this step; I'm assuming that in normal use - where you're using a local account instead of a Centrify network account - you don't need to do this because you have access to these folders by default. In my case, since I'm sharing a folder in the directory associated with my network account instead of the directory associated with my local account, these permissions are not enabled by default.
Log onto my Mac from a Windows machine using my Mac's local username/password. [Again, this is no different that what I was doing previously, but because of step 2, I can now access the folder associated with my network user]
I'd prefer to just stick with a single user id/password, but this at least lets me access my files.

BO - Problem to connect through windows client

Server OS: Windows Server 2003 SP2
BOE Version: XI Release 2
Client SO: Windows XP Professional SP2
DB: Oracle 10 v 10.2
Problem:
I have a BOE XI Release 2 installed on a server and if I try to connect via WEB everything is perfect but when I try to connect using windows clients (Designer, DESKiu2026)
I am getting the following error:
" No se puede acceder al repositorio. (USR0013)"
u201C[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Error en el transporte: Fallo en la comunicación.(hr=#0x80042a01)u201D
I'm using the standard port which is the 6400.
I hope your comments.
Thanks!

Hi,
Are you using any authentication ?
If you are using LDAP, then try this...
Symptom
Error logging onto Desktop Intelligence or Designer using LDAP authentication:
"(USR0013) [repo_proxy 13] SessionFacade::openSessionLogon with user info has failed (The LDAP authentication could not log you on.) Verify your logon information. If your account is under a different domain as o=u2026, please enter your dn (hr=#0x80042a01)."
Reproducing the Issue
Configure LDAP authentication
Error appears from a client computer running Desktop Intelligence or Designer
Logon to Desktop Intelligence or Designer on the server works
Cause
LDAP authentication from the client connects directly to the LDAP directory without passing the CMS
The server has been configured on the firewall, but not the client computer
Resolution
Configure the firewall for the client machines to pass, so that they can reach the LDAP directory

Problem while connecting the Weblogic Domain to MySql5.

Hi,
I would like to send you the entire stacktrace..
JAVA Memory arguments: -Xms256m -Xmx768m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=192m
WLS Start Mode=Development
CLASSPATH=;C:\WEBLOG~1\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\WEBLOG~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\WEBLOG~1\patch_wlp1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\WEBLOG~1\patch_cie670\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\WEBLOG~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\WEBLOG~1\JDK160~1\lib\tools.jar;C:\WEBLOG~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\WEBLOG~1\WLSERV~1.3\server\lib\weblogic.jar;C:\WEBLOG~1\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\WEBLOG~1\WLSERV~1.3\server\lib\webservices.jar;C:\WEBLOG~1\modules\ORGAPA~1.5/lib/ant-all.jar;C:\WEBLOG~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\WEBLOG~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\WEBLOG~1\WLSERV~1.3\server\lib\xqrl.jar;C:\WEBLOG~1\WLSERV~1.3\server\lib\xquery.jar;C:\WEBLOG~1\WLSERV~1.3\server\lib\binxml.jar;
PATH=C:\WEBLOG~1\patch_wlw1030\profiles\default\native;C:\WEBLOG~1\patch_wls1030\profiles\default\native;C:\WEBLOG~1\patch_wlp1030\profiles\default\native;C:\WEBLOG~1\patch_cie670\profiles\default\native;C:\WEBLOG~1\patch_cie660\profiles\default\native;C:\WEBLOG~1\WLSERV~1.3\server\native\win\32;C:\WEBLOG~1\WLSERV~1.3\server\bin;C:\WEBLOG~1\modules\ORGAPA~1.5\bin;C:\WEBLOG~1\JDK160~1\jre\bin;C:\WEBLOG~1\JDK160~1\bin;C:\WebLogicBea\jrockit_160_05\jre\bin;E:\Oracle\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;F:\Oracle\Ora81\bin;C:\Program Files\Oracle\jre\1.1.7\bin;F:\Oracle\Ora81\orb\bin;C:\Program Files\Java\jdk1.5.0_06\bin;E:\Oracle\orb\bin;C:\WEBLOG~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Cleaning up license and uid files
Starting Autonomy with CONTENT_SEARCH_OPTION = full
Autonomy Distributed Search Handler engine started.
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
C:\WEBLOG~1\JDK160~1\bin\java -client -Xms256m -Xmx768m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=192m -Xverify:none -da -Dplatform.home=C:\WEBLOG~1\WLSERV~1.3 -Dwls.home=C:\WEBLOG~1\WLSERV~1.3\server -Dweblogic.home=C:\WEBLOG~1\WLSERV~1.3\server -Dweblogic.wsee.bind.suppressDeployErrorMessage=true -Dweblogic.wsee.skip.async.response=true -Dweblogic.management.discover=true -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=C:\WEBLOG~1\patch_wlw1030\profiles\default\sysext_manifest_classpath;C:\WEBLOG~1\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\WEBLOG~1\patch_wlp1030\profiles\default\sysext_manifest_classpath;C:\WEBLOG~1\patch_cie670\profiles\default\sysext_manifest_classpath;C:\WEBLOG~1\patch_cie660\profiles\default\sysext_manifest_classpath;C:\WebLogicBea\wlportal_10.3\p13n\lib\system;C:\WebLogicBea\wlportal_10.3\light-portal\lib\system;C:\WebLogicBea\wlportal_10.3\portal\lib\system;C:\WebLogicBea\wlportal_10.3\info-mgmt\lib\system;C:\WebLogicBea\wlportal_10.3\analytics\lib\system;C:\WebLogicBea\wlportal_10.3\apps\lib\system;C:\WebLogicBea\wlportal_10.3\info-mgmt\deprecated\lib\system;C:\WebLogicBea\wlportal_10.3\content-mgmt\lib\system -Dweblogic.alternateTypesDirectory=C:\WebLogicBea\wlportal_10.3\portal\lib\security -Dweblogic.Name=AdminServer -Djava.security.policy=C:\WEBLOG~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<Oct 27, 2009 11:15:35 AM IST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\WebLogicBea\wlportal_10.3\analytics\lib\system\analytics_sys.jar;C:\WebLogicBea\wlportal_10.3\apps\lib\system\groupspace_system.jar;C:\WebLogicBea\wlportal_10.3\content-mgmt\lib\system\content_system.jar;C:\WebLogicBea\wlportal_10.3\info-mgmt\deprecated\lib\system\commerce_system.jar;C:\WebLogicBea\wlportal_10.3\info-mgmt\lib\system\wlp-schemas.jar;C:\WebLogicBea\wlportal_10.3\info-mgmt\lib\system\wlp_content_system.jar;C:\WebLogicBea\wlportal_10.3\info-mgmt\lib\system\wps_system.jar;C:\WebLogicBea\wlportal_10.3\light-portal\lib\system\netuix_common.jar;C:\WebLogicBea\wlportal_10.3\light-portal\lib\system\netuix_schemas.jar;C:\WebLogicBea\wlportal_10.3\light-portal\lib\system\netuix_system.jar;C:\WebLogicBea\wlportal_10.3\light-portal\lib\system\wsrp-client.jar;C:\WebLogicBea\wlportal_10.3\light-portal\lib\system\wsrp-common.jar;C:\WebLogicBea\wlportal_10.3\p13n\lib\system\p13n-schemas.jar;C:\WebLogicBea\wlportal_10.3\p13n\lib\system\p13n_common.jar;C:\WebLogicBea\wlportal_10.3\p13n\lib\system\p13n_system.jar;C:\WebLogicBea\wlportal_10.3\p13n\lib\system\wlp_services.jar;C:\WebLogicBea\wlportal_10.3\portal\lib\system\netuix_system-full.jar>
<Oct 27, 2009 11:15:35 AM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<Oct 27, 2009 11:15:36 AM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR376251 Wed Aug 06 09:19:34 PDT 2008
WebLogic Server Temporary Patch for CR371247 Sat Aug 09 20:10:38 PDT 2008
WebLogic Server Temporary Patch for CR377673 Tue Aug 12 20:39:50 EDT 2008
WebLogic Server Temporary Patch for CR377673 Tue Aug 12 20:39:50 EDT 2008
WebLogic Server Temporary Patch for CR376759 Thu Aug 14 14:53:02 PDT 2008
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
<Oct 27, 2009 11:15:42 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 27, 2009 11:15:42 AM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Oct 27, 2009 11:15:42 AM IST> <Notice> <Log Management> <BEA-170019> <The server log file C:\WebLogicBea\user_projects\domains\zarDbDomain\zarDbDomain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<Oct 27, 2009 11:15:57 AM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Oct 27, 2009 11:16:10 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Oct 27, 2009 11:16:10 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 27, 2009 11:16:40 AM IST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Oct 27, 2009 11:16:41 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Oct 27, 2009 11:16:41 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Oct 27, 2009 11:16:41 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.9.200.236:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 27, 2009 11:16:41 AM IST> <Warning> <Server> <BEA-002611> <Hostname "ZieF.pl", maps to multiple IP addresses: 192.9.200.236, 127.0.0.1>
<Oct 27, 2009 11:16:41 AM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 27, 2009 11:16:41 AM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "zarDbDomain" running in Development Mode>
<Oct 27, 2009 11:16:41 AM IST> <Warning> <Server> <BEA-002611> <Hostname "192.9.200.236", maps to multiple IP addresses: 192.9.200.236, 127.0.0.1>
<Oct 27, 2009 11:16:41 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Oct 27, 2009 11:16:41 AM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Oct 27, 2009 11:17:18 AM IST> <Error> <Security> <BEA-090064> <The DeployableAuthorizer "myrealm_weblogic.security.providers.xacml.authorization.XACMLAuthorizationProviderImpl" returned an error: weblogic.security.spi.ResourceCreationException: Security:090310Failed to create resource.>
<Oct 27, 2009 11:17:20 AM IST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1256622425468' for task '0'. Error is: 'weblogic.application.ModuleException: Exception preparing module: EJBModule(netuix.jar)
Unable to deploy EJB: ProxyPagePersistenceManager from netuix.jar:
Exception while attempting to deploy Security Policy: weblogic.security.service.ResourceCreationException: weblogic.security.spi.ResourceCreationException: Security:090310Failed to create resource
weblogic.application.ModuleException: Exception preparing module: EJBModule(netuix.jar)
Unable to deploy EJB: ProxyPagePersistenceManager from netuix.jar:
Exception while attempting to deploy Security Policy: weblogic.security.service.ResourceCreationException: weblogic.security.spi.ResourceCreationException: Security:090310Failed to create resource
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:452)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
Truncated. see log file for complete stacktrace
weblogic.ejb20.interfaces.PrincipalNotFoundException: Exception while attempting to deploy Security Policy: weblogic.security.service.ResourceCreationException: weblogic.security.spi.ResourceCreationException: Security:090310Failed to create resource
at weblogic.ejb.container.internal.SecurityHelperWLS.deployPolicy(SecurityHelperWLS.java:357)
at weblogic.ejb.container.internal.SecurityHelper.deployPolicy(SecurityHelper.java:306)
at weblogic.ejb.container.internal.SecurityHelper.deployPolicy(SecurityHelper.java:294)
at weblogic.ejb.container.internal.SecurityHelper.deployAllPolicies(SecurityHelper.java:249)
at weblogic.ejb.container.internal.SecurityHelper.deployAllPolicies(SecurityHelper.java:228)
Truncated. see log file for complete stacktrace
<Oct 27, 2009 11:17:20 AM IST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'myPortalEAR'.>
<Oct 27, 2009 11:17:20 AM IST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Exception preparing module: EJBModule(netuix.jar)
Unable to deploy EJB: ProxyPagePersistenceManager from netuix.jar:
Exception while attempting to deploy Security Policy: weblogic.security.service.ResourceCreationException: weblogic.security.spi.ResourceCreationException: Security:090310Failed to create resource
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:452)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
Truncated. see log file for complete stacktrace
weblogic.ejb20.interfaces.PrincipalNotFoundException: Exception while attempting to deploy Security Policy: weblogic.security.service.ResourceCreationException: weblogic.security.spi.ResourceCreationException: Security:090310Failed to create resource
at weblogic.ejb.container.internal.SecurityHelperWLS.deployPolicy(SecurityHelperWLS.java:357)
at weblogic.ejb.container.internal.SecurityHelper.deployPolicy(SecurityHelper.java:306)
at weblogic.ejb.container.internal.SecurityHelper.deployPolicy(SecurityHelper.java:294)
at weblogic.ejb.container.internal.SecurityHelper.deployAllPolicies(SecurityHelper.java:249)
at weblogic.ejb.container.internal.SecurityHelper.deployAllPolicies(SecurityHelper.java:228)
Truncated. see log file for complete stacktrace
There is around 140 Tables created in mysql database...
Is there anything wrong ?
Regards
Zarrakh

Well.. When i runned the script for mysql from the weblogic domain configuration and compared the pointbase and mysql database.. i found that there are few tables, views and triggers that are missing in mysql db.. Could you telll me how can i create this missing tables, views and triggeres
Regards

Setup router to router VPN connecting 2 windows domain networks via 2 RV042 routers

I am using 2 RV042 routers. I have created a point to point VPN with Remote Security Group Type= Subnet, using the default IPSec settings.
Under advanced settings- Aggressive Mode, Keep Alive enabled.
Location A- SBS 2011 standard, Servername=SBSServer, Domainname = Smallbusiness.Local, IP address 10.1.10.50
DHCP range 10.1.10.100 to 10.1.10.175. DNS and Print services. No WINS.
Location B- Server 2008 R2, Sername=SBSServer, Domain name=Smallbusiness.Local, IP address 192.168.10.50
DHCP range 192.168.10.100 to 192.168.10.175, DNS, Print Services and Remote Desktop Services. No WINS
I am wondering 2 things. Can I setup the VPN tunnel to route traffice between the 2 networks without changing the server names. Leaving the servernames the same. I have it setup that way but also had netbios broadcast enable. If I disable netbios broadcast will that be enough for these networks to be independent of each other. I was hoping not to have to rename the domain and there are advantages to having the same user and domain name when mapping drives between networks. I have not needed to authenticate those drives or provide credititals for printing either.
2) Should I change the domain name so that each network has a unique domain name or, if I change the servername of the 2008 R2 server will that essentially solve my network issues, the primary issue being that location b has clients that occasionally can not find the 2008 R2 domain controller. After a restart the usually resolve to the correct domain controller.
Essentially what I am asking is what are the best practices to connect 2 separate Windows domain networks via a VPN and have those networks capable of file sharing to the each others domain server and printing to the network printers at both loations.
Should I have separate domain names-
Should I have separate server and computer names-

"reserved not zero on payload" generally means your pre-shared keys don't match. Try removing the "crypto isakmp key ...." line and retyping it in again on both sides. In particular DON'T cut/paste it from one router config into another, this quite often puts a space character onto the end of the key, which the router interprets as part of the key and they therefore don't match.

Connecting to Windows computer from Mac

So here is my issue:
I can connect to my Mac from my PC, but not the other way around.
Both of my machines have internet, and my mac is on a wireless connection.
I want to know how I can access the files from my Windows machine from my Mac.
This is what ive tried so far, and every time I enter in the address it tells me I have entered in a wrong user name or password when I have not had the change to enter anything in!
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1164.html
Am I dealing with an OS X problem here or am I dealing with an XP problem? Wherever the issue is coming from, is it fixable?

Might be both... OSX will/can send past passwords & such before asking, but this site should fix you up. Also might need to ensure they are both the same Workgroup.
Is that smb://+ the IP you're entering?
iFelix...
http://www.ifelix.co.uk/tech/3020.html

Lenovo Y570 problems after updating to Windows 10 from Windows 7

Hi everyone, I updated my operating system to Window 10 from Windows 7 four days ago and I am having a ton of problems. I lost a lot of my Lenovo interface options as well... One of the worst and most annoying problems is that randomly, for half a second, the computer stops and thinks which freezes up my typing. If I am writing something, when it wants to freeze it prevents me from typing that letter. It basically overrides my keyboard well it does that freezing for half a second. Also, when I have a drop down menu it will close when this happens or when I right click, the menu will disappear when this "glitch" happens. One of the biggest clues I found is under the task manager. In the Processes tab, when this "glitch" happens "Windows Problem Reporting" pops up for a half second. I am not sure if that is causing this problem or if something goes wrong and "Windows Problem Reporting" pops up because of something else? Is there a way to check and see what these "Windows Problem Reporting" are? My other problems are that my fan control does not work anymore. I had the option to control the speed and the sound of my fan before updating to Windows 10. Would Lenovo or Windows 10 ever going to sent a drive to fix this problem? Also, I can not control my GPU switch anymore. Before the update I could change my GPU from Intel HD card to Geforce 555M. Now I have no idea what GPU I am using and how to go back and forth. Is there a fix for this? Since all these problems occurred with the Windows 10 update, would it be better for me to go back to Windows 7 and wait to see if Lenovo and Windows ever going to create drives for Lenovo Y570? Is it advisable to switch back W7 and switch back to W10 later?

spdfolife wrote:
Hi everyone, I updated my operating system to Window 10 from Windows 7 four days ago and I am having a ton of problems. I lost a lot of my Lenovo interface options as well... One of the worst and most annoying problems is that randomly, for half a second, the computer stops and thinks which freezes up my typing. If I am writing something, when it wants to freeze it prevents me from typing that letter. It basically overrides my keyboard well it does that freezing for half a second. Also, when I have a drop down menu it will close when this happens or when I right click, the menu will disappear when this "glitch" happens. One of the biggest clues I found is under the task manager. In the Processes tab, when this "glitch" happens "Windows Problem Reporting" pops up for a half second. I am not sure if that is causing this problem or if something goes wrong and "Windows Problem Reporting" pops up because of something else? Is there a way to check and see what these "Windows Problem Reporting" are? My other problems are that my fan control does not work anymore. I had the option to control the speed and the sound of my fan before updating to Windows 10. Would Lenovo or Windows 10 ever going to sent a drive to fix this problem? Also, I can not control my GPU switch anymore. Before the update I could change my GPU from Intel HD card to Geforce 555M. Now I have no idea what GPU I am using and how to go back and forth. Is there a fix for this? Since all these problems occurred with the Windows 10 update, would it be better for me to go back to Windows 7 and wait to see if Lenovo and Windows ever going to create drives for Lenovo Y570? Is it advisable to switch back W7 and switch back to W10 later?There might be a need to reinstall drivers. Try installing them using compatibility troubleshooter.

If anybody have a problem with connection to smtp server from iPhone

If anybody have a problem with connection to smtp server just add new server
Seetings → Mail, Contacts, Calendars → User Me account → Account → Under Advanced choose Mail → SMTP → Add Server
smtp.me.com
user name ([email protected])
password
Apple, i am in love with your product, please fix this so we could injoy it even more.

Might be something to help you here > iCloud: Mail server information

Problems in connecting to Windows SBS 2003 server from OSX 10.5.x

Hi there
Out of many Macs (all 10.5.4) in our network, I have been able to authenticate others to the Active Directory and share File services of the Windows Small Business Server (SBS) 2003. But one is having problems. They have authenticated to the active directory correctly from Directory utility.
But when I try to access the SBS server, there is a message "Connecting to smb://myserver..." displayed for indefinite time. Also, I don't find the smb listed in Directory utility. Is that a problem? If so, how can it be fixed? I searched Internet but couldn't find a way to download smb client.
Please help.

It certainly works for me although I have 10.5.2. No special settings, just server address, username and password and it connects. To confirm I just tried it once more a moment ago by creating a new VPN configuration. No problems at all. Is your problem related to a single computer or is it so that now 10.5 computers can connect?

Problem in connecting to times ten from jsp

Hi sir,
I am trying to connect with timesten from jsp. But am getting following Exception.
SQLException: Problems with loading native library/missing methods: no ttJdbcCS70 in java.library.path
I am using myeclipse 8.6 ide. I have diployed my project in myeclipse tomcat server.
Please help me in resolving this problem.
Follosing is my code.
display.jsp:
<%@page import="com.tbss.RealTimeDAO,com.tbss.RealTimeCallReport,java.util.*"%>
<%
RealTimeDAO rdao=new RealTimeDAO();
List<RealTimeCallReport> list=rdao.getRecords();
pageContext.setAttribute("list",list);
out.print("list"+list+"\n");
Iterator<RealTimeCallReport> i=list.iterator();
while(i.hasNext()){
RealTimeCallReport rp=i.next();
out.println(rp.getCompaignID()+"\t"+rp.getConnectedPhone()+"\t"+rp.getRecordID()+"\t"+rp.getSessionDuration()+"<br/>");
%>
RealTimeDAO.java
public class RealTimeDAO {
public List<RealTimeCallReport> getRecords(){
List<RealTimeCallReport> list=new ArrayList<RealTimeCallReport>();
try {
// create the TimesTen data source and set the connection URL
TimesTenDataSource ttds = new TimesTenDataSource();
ttds.setUrl("jdbc:timesten:client:dsn=ttc1;UID=ttsa;PWD=abc123");
// connect to the TimesTen database
TimesTenConnection ttcon = (TimesTenConnection) ttds.getConnection();
// create and execute the statement
Statement stmt = ttcon.createStatement();
ResultSet rset = stmt.executeQuery("select * from REAL_TIME_CALL_REPORT");
// process the result set
while(rset.next()) {
RealTimeCallReport rp=new RealTimeCallReport();
rp.setCompaignID(rset.getLong("CAMPAIGN_ID"));
rp.setConnectedPhone(rset.getLong("CONNECTEDPHONE"));
rp.setRecordID(rset.getLong("RECORD_ID"));
rp.setSessionDuration(rset.getString("SESSION_DURATION"));
rp.setSessionID(rset.getString("SESSION_ID"));
list.add(rp);
return list;
} catch(SQLException e) {
e.printStackTrace();
return null;
}

The driver requires a shared library (nothing to do with java itself.)
The shared library is not in the shared library path. The error suggests that the OS is Windows which means that the PATH (env variable) of the executable must have the directory of the shared library in it.

Local user account not working after trying to connect to windows domain

Newb Question
I was trying to log into a domain with my macbook today at work without success. I think I selected something that is telling my mac to search the domain for the user account, and NOT the local computer. So now when I boot it up the local user account isn't displayed, only 'other...'. When I click that it takes me to a log in text box that doesn't accept either my long or short user names. I booted up from the Snow Leopard disk and tried to change my password there, and that can see the local account there (and lets me change the password). However, when I boot back up from the HDD I get the same problem.
Is there a way of telling it to look locally rather than on the domain when logging in?

you could reset password on the root account from the boot disk also while booted to the system disk, open startup disk, and make sure your computer is set to boot from the built in hard drive.
This will enable root, and hopefully you can log into the computer. try logging in with the user name 'root' and what ever password you set. if you do get in, you can go to apple menu, system preferences, accounts, login options.
Make sure to set display login in window to list.
also make sure that when you click on the join button under login options, that there is nothing there. as in blank.

Is there any way to log in to a windows domain from iPad?

My school has both a windows network and iPads. Until recently all worked fine except there has now been a county-wide internet policy change. To connect from the school network to the internet there is now a lightspeed gateway. Now this is fine on the windows PC as each child's log in credentials automatically pass to the lightspeed server to allow internet access.
On the iPads though the situation is almost bad enough to render them useless. To use any app that requires internet access you have to log in in either Safari or K9 browser (the education authority's prefered browser). The connection then drops out if the iPad goes into standby.
Is there any app that would allow the children to log on using their windows credentials when the iPad starts up and keeps them connected until they log out? This would make life so much easier - I managed to work out all the connection issues on my own but these children are under 8, expecting them to understand all this is unreasonable.

Oh Lightspeed.
And no there isn't for what you asked - through AD, have you looked at Mobile Manager in Lightspeed? I didn't want our school getting Lightspeed so I haven't used it - I don't know how much control and flexability it has.

Problem in connecting S-Video cable from T42 to my TV- Nothing showing in my TV

Hi ,
I need your help in S-Video cable . When i am connecting my labtop ( T42 ) to my panosonic TV ,my TV doesn't show the anything from my primary screen ( labtop ) , I tried to do everything all drivers, adapters and window updates etc. But still could not get the picture on my TV with S-Video cable. Ihave tested S-video cable and it works fine for other labtop. Any help in this will be really appriciated.

you got to switch on the option for TV screen output from laptop, if you are using T42 with ATI graphics card, just get the latest Catalyst driver for ATI, it has an option for TV screen output.

Problem in connecting Non Oracle Database from Oracle

Hi:
I want to access "MS ACCESS" from Oracle 10g (10.2.0.1) using Windows XP.
I tried my best, applied all proper instructions I found from books and from Internet, but getting an error.
Here is what I did:
My Oracle database is called "ORCL" and "MS ACCESS" is called "access_1".
There is only one table "Employees" in "access_1".
1. Accessed ODBC from Start | Control Panel | Administrative Tools.
2. Clicked on Users DSN | "access_1" | Add.
3. Clicked on "Drive do Microsoft Access (*.MDB)" .
4. Hit Finish.
5. Entered at DATA SOURCE NAME "ODBC1" and at DESCRIPTION "Connect Oracle to MS Access". Also I clicked on SELECT and chose the "Access_1.mdb" which is located at "C:\Documents and Settings\Muhammad\My Documents" folder. Clicked OK. and clicked on OK again.
6. Now I went to Oracle side and configured listener as follows: (Only portion is shown here)
# listener.ora Network Configuration File: C:\oracle\product\orcl\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\orcl)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = hsodbc)
(ORACLE_HOME = C:\oracle\product\orcl)
(PROGRAM = hsodbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = RIYAZDESKTOP)(PORT = 1521))
7. Configuring the hs file located at C:\oracle\Product\Orcl\hs|admin as follows:
# HS init parameters
# HS_FDS_CONNECT_INFO = <odbc data_source_name>
# HS_FDS_TRACE_LEVEL = <trace_level>
HS_FDS_CONNECT_INFO = odbc1
HS_FDS_TRACE_LEVEL = OFF
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
8. The TNSNAMES.ORA File is located at C:\:\oracle\product\orcl\network\admin\ and has the following text (only the related text is shown here):
# tnsnames.ora Network Configuration File: C:\oracle\product\orcl\network\admin\tnsnames.ora
# Generated by Oracle configuration tools
access_db.world =
(DESCRIPTION =
(Address = (PROTOCOL = TCP) (HOST = RIYAZDESKTOP) (PORT = 1521))
(CONNECT_DATA = (SID = hsodbc))
(HS=OK)
9. The database link is created as follows:
SQL> create database link access_db USING 'access_db.world';
Database link created.
SQL>
10. Now the test and selection:
SQL> select * from employees@access_db;
select * from employees@access_db
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from ACCESS_DB
OH! I HAVE TO RELOAD THE LISTENER AND I DID IT HERE.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\oracle\product\orcl\BIN>lsnrctl reload
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 17-NOV-2006 17:51:26
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
C:\oracle\product\orcl\BIN>
SQL> select table_name from all_tables@access_db;
select table_name from all_tables@access_db
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified (SQL State: IM002; SQL Code: 0)
ORA-02063: preceding 2 lines from ACCESS_DB
I HAVE DONE IT EXACTLY WHAT YOU PROVIDED ME BUT GOT THE SAME RESULT.
ANY SOLUTION!
THANKS.

see Connect 9i to Microsoft Access Database

Problems in connecting to windows domain from a L3 switch

Similar Messages

Maybe you are looking for