Problems in creating new final cut title in motion 5.0.5, not read from fcx

i am trying to create title in motion 5.0.5, but after saved them in new category i open them in final cut x (10.0.5) and just see a red icon, same thing happen if i just open a title in fcx and try to "open a copy in motion", without doing anything, just opening and saving but cannot use in final cut.
any help?.

yes, i see a folder and a moti file and i relaunched fcx,
Even if I just open a copy in motion of an existing title in fc, and save it again I obtain the same result.

Similar Messages

I have a copy of Final Cut Express 2. Can I get a current upgrade instead of repurchasing the new Final Cut Pro?

I have a old copy of Final Cut Express 2 that I never installed. Can I get a current upgrade instead of repurchasing the new Final Cut Pro?
The Apple Store does not show does not contain purchase information of the old unused Final Cut Express. What can I do to register Final Cut Express 2 will not operate in the current OS systems on my iMac. It only is compatible with the G3 or G5.

If you have a record/documentation of your FCS full version purchase, you can contact Apple here:
https://ssl.apple.com/support/proapps/serialnumbers/
to obtain your serial number.
MtD
Message was edited by: Meg The Dog to fix typo

New iPod Touch-want to load videos created using Final Cut Studio

I'm unable to transfer movies I create on my Mac into the iPod Touch. I'm assuming all transfers to the iPod need to go through iTunes - is this correct?
I created a video in Final Cut Pro, then compressed two versions of podcasts in Compressor.
H.264 for iPod video and iPhone 320x320(QVGA)
H.264 for iPod video and iPhone 640x640(QVGA)
I then dragged them into iTunes library, thinking they would go into the Podcast folder, but instead they went to the Movie folder.
I synced to the iPod, and they fail to transfer/load. I then selected "Create iPod or iPhone Version" from the iTunes "Advanced" menu in case there was some file issue, but was unsuccessful in dragging it to the Podcast folder.
Does the iPod Touch sync up to all iTune's folders, or, is it limited to what's in the Podcast folder?
Is there a utility that exists to verify the video files are of the correct format.
Are there other steps I am missing?

NibblesNBits wrote:
I created a video in Final Cut Pro, then compressed two versions of podcasts in Compressor.
H.264 for iPod video and iPhone 320x320(QVGA)
H.264 for iPod video and iPhone 640x640(QVGA)
For anyone else in the same situation - videos created in Final Cut Pro and compressed using either of the Compressor settings will create podcasts that can be synced up and play on the iPod Touch,
The problem was the "Sync Movies" setting - it was disabled. The challenge was finding the settings, and wouldn't have been an issue prior to release of version 3.0 software upgrade notice.
The "Sync" settings were where I first looked, from within iTunes, but as I said, the device settings were being hidden by an "Apple commercial" for the version 3.0 software upgrade - once I clicked on "Remind Me Later" I was able to see the 8 tabbed configuration screen. I guess marketing trumps usability.

Ok, I thought I could do a project in my new Final Cut Pro X. I got everything downloaded on Final Cut and I made my Project. The problem is is has taken so long to render that I don't have time. How do I download the video from Final Cut to Imovie?

ok, I thought I could do a project in my new Final Cut Pro X. I got everything downloaded on Final Cut and I made my Project. The problem is is has taken so long to render that I don't have time. How do I download the video from Final Cut to Imovie?

Your media is stored in Final Cut Events folder > "name of event" > original media. The Final Cut Events folder is in your movies folder or at the root level of an external drive if you are using one to store your media. Simply open iMovie and under file menu select import movies. Navigate to the original media folder and import your clips to Imovie event library.

I just updated to new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. when it comes back to tcp x it's black.

I just updated to the new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. When i send a sample to MBL and color grade it , it comes back to final cut pro x all black even after render. By the way on the MBL i am using the GPU rendering, I used before like 4months ago and it was fine. And i don't like to use the CPU because it very slow.

What is the frame rate of the project? At what frame rate was the media recorded? What frame size?
What are the audio settings?
What are the specs of the machine, in particular how much RAM, how is the hard drive connected, etc.?
If possible, post screenshots of the inspector for the project.
It could be related to the audio frequency?

Does the projects created in Final Cut Express transfer over to the new Final Cut Pro software?

Does the video projects created in Final Cut Express transfer over to the new Final Cut Pro software?

You want to go from FCE to FCP-X?
You would need to do so in multiple steps.
1) You would need to be working in a very late version of FCE.
2) Open the FCE project in FCP-7.
3) In FCP-7, export an XML of the sequence you wish to get to FCP-X.
4) Purchase the software 7toX
http://assistedediting.intelligentassistance.com/7toX/
5) Import the XML into 7toX, export the FCP-X friendly file
6) Import the converted XML into FCP-X
7) Re-link all you media
It should be noted that when you use XML, not all the things you have done in your original sequence will make it through the final translation. There is more information about this at the 7toX page linked above.
MtD

We've just downloaded Maverick and the new final cut 10.1. On two separate computers it has crashed and we have lost our entire project that we were editing. Not sure if it is a final cut problem or maverick. Any suggestions on how to get the timeline

We just installed maverick and the new final cut. On 2 separate computers we have had it crash while using final cut and have lost the project. Now we are reading that our time machine is not working with maverick. Any suggestions on how to get timeline back from the new final cut? Thought it was suppose to save automatically.

We just installed maverick and the new final cut. On 2 separate computers we have had it crash while using final cut and have lost the project. Now we are reading that our time machine is not working with maverick. Any suggestions on how to get timeline back from the new final cut? Thought it was suppose to save automatically.

Why new final cut X is so restrictive connected clips? I do not see benefit.

I am coming from final cut 7 and I have no idea why new final cut X is so restrictive in having primary storyline and connected clips. I loved how in FC7 all clips were independent in timeline and gave you freedom to move and organize your clips however you wanted.
Now I have to take extra steps or jump through hoops to move clips around becaused they are connected to primary storyline. Like I have to create secondary storylines. Really??
I do not see any benefit to connected clips except that it automatically follows primary storyline when you move primary clip around - which most of time I do not want it to do. We should be able to turn this off because I do not see any benefit to connected clips with primary storyline.
FCX is dictating how we organize clips on timeline which is way more restrictive than FC7. This is just wrong.
Also bring back enable tracks. Why in the world did they remove tracks. Tracks work and is easier to visualize and organize clips in timeline. Like if I wanted to disable audio or video for a track it was just one click in FC7. Now there are extra steps in FCX They should enable this for people who are use to tracks.
They should really talk scold to whoever mad scientist who wanted to make FCX more restrictive than FC7 and impose their workflow on everyone else.
I like magnetic timeline where you can move clips around and other clips will automatically move to make room for it. This save time.
So can we disable connected clips and let us enable tracks just like better FC7?

The first Quantel NLE, back in the 80ies, was mimicing the Moviola - showing vertical stripes of 'film'.
So, you could ask "Why have they changed to horizontal?"
On editing film, you wrote with some white wax pen an X onto it, to indicate a dissolve....
So, you could ask "Why have they changed that to drag'n drop grey boxes?"
On recording they hold a clapper into the cam, to 'sign' the time-code.
So, you could ask "Why have they changed that to meta-tags, hidden invisible in the file?"
Aside doing compos ('Brady Bunch', '24'), there are no 'tracks' in no movie.
In any movie, there's always just a single storyline...
If you like to apply 'variations', get customed to FCPX' Auditions.
If you like to adjust cut-aways, get customed to the various trim/ripple/nudge options of FCPX.
If you like to pre-select clips, get customed to the Events-concept and its endless options (you can even abuse to create 'bins'!) to tag clips.
If you like to 'pre-comp', get customed to FCPX' compounds and their own timelines.
It is a different, a new way of editing. That simple.
As others told you: nobody forces you to adopt it.
There's AP, there's DaVinci Resolve .... and many others.
And you even can Position a clip...
Russ H wrote:
@Tom and David: OP has posted identical comment in Creative Cow/The Debate.
excellent obeservation...
Such a debate comes two years too late here, I assume...

Can I download and use final cut pro 7 on new mac pro tower?,or I must work with the new final cut pro x only?

can I download and use final cut pro 7 on new mac pro tower?,or I must work with the new final cut pro x only?

Disclaimer: This response assumes that a "new mac pro tower" is the new cylindrical model.
1. You cannot download Final Cut Pro 7. FCP7 is part of Final Cut Studio (2009) a.k.a "FCS3" and it was only released on a DVD set. It can still be purchased online (maybe even from Apple) for prices ranging from a few hundred to $1K and it is 5 years old and unsupported.
2. Although there are reports of systems running FCS3 on Mavericks, there are also a host of problems associated with this OS/software combination.
3. A new version of iMovie Pro Final Cut Pro X has been released which is reportedly very fast and is supported.
It's all a matter of what kind of movies you make...

I am having a problem with playback in Final Cut 6.0.6

Hello,
I am having a problem with playback in Final Cut 6.0.6 of 1920x1080 60p footage.
I transcoded MTS files shot on a Sony NEX FS100 into Apple Pro Res mov files but the
playback stutters in Final Cut and QTime making it impossible to edit. Is this because the files
are just so big the computer is having a problem processing them? If so what should I edit in to preserve the
best quality?
I am Running Mac OSX 10.6.8
2x2.4 Ghz Quad Core Intel
32 GB 1066 MHz DDR3
Admittedly my FCUT is out of date, I intend to up to X when I finish off an ongoing project.
Thanks Luci

You might consider running diskwarrior on your drive (alsoft.com). And run diskutility, repair disk. A corruption of the drive could cause problems. Also, drive speed starts to fall sharply as the drive gets full. Make sure you have a minimum of 10% free space on the drive. You might also get a utility to check the speed of the drive. I think Aja has one.
Also, do you have anything else connected to the firewire bus? If so, try disconnecting it. You might also try disconnecting ethernet and turning off your airport. Resetting your fcp preferences couldn't hurt.
https://discussions.apple.com/docs/DOC-2491

Spinning ball all the time? new final cut?

Hi there,
After spend 300 dollars in the brand new final cut X, i notice that i also have a free spinning colourfull beachball?! yes in the previous version i never add so many hang ups and so time waiting for some operations, i have, as u can say the best comfiguration tha a imac can have until a year ago, 16 g of ram and a i7 processor, well the best on a imac.
Now and after a expatation i notice that its far for the desire result and i need help to try to resulve this bugs or not.
Hope to have any news, from someone and especially an update to fix from Apple

I'm running it on a 15" MacBook Pro and I get constant beach balls, they seem to get more frequent the longer I have the app open, and ultimately I have to force close and restart my computer because the whole system bogs down. Very aggravating. I have a Core 2 Duo and only 4 GB RAM, so I understand it would run slow, but after about an hour of editing, sometimes less, it becomes unusable.

If I download New Final Cut Pro X ... Will I Still be able to use my Final Cut Pro 7.0.3?

If the answer is yes how do I separate them? Can they both be in my applications folder? I just want to try the new program.
I have one more question ... Will the New Final Cut Pro X be able to use some of my old footage NTSC DVPro 720x480?
Thank You
roger

The answer is yes to all your questions.
Final Cut Studio gets moved to its own subfolder inside Applications.

Problem with creating new user in portal = portlet is not visible

Hi,
I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
How can I make this portlet visible?
Please Help
thank you...
Gilbert

Hi..my problem slightly similar.
I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
I expect the user will be a public user.
But, when he try to logged in the portal,
He cannot see all the PORTLETS related to database values..
All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
So, what did i do wrong?
Plz Advise, and thanks.

Problem in creating new communication channel template in IR

Hi experts,
I currently have problems with creating new communication channel template in Integration Repository. If I choose the New-Context (Adapter Objects-->Communication Channel Template) the dialog "CREATE OBJECT" is shown. After I have inserted the Name of my template I push the create button.
Then the following error occurs:
STOP: Internal error: Object cannot be changed in display mode
DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED).
So can anybody help me. Thanks for your help.
Best regards.
Mario

Hi Mario,
            This is genral problem appearing in PI 7.0 with SP12.
            Previously, i have the same problem.
            i.e STOP: Internal error: Object cannot be changed in display mode
DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED)
            Regarding this we raise an OSS note SAP people.
            they gave the suggestion that update with SP13.
          i discuss with basis team and install the SP13.
           now the problem is solved, i can able to create the Communication Channel Template.
Please award points, if it really help to u
Regards
Mahesh.

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

Problems in creating new final cut title in motion 5.0.5, not read from fcx

Similar Messages

Maybe you are looking for