Problems in creating Profit Center : Message KM019

Hi All,
Please suggest the tcode for viewing the sap messages.
I am creating profit center but system shows an error while assigning it profit center group. System shows an error that this profit center group cannot be assigned. I tried to assign another profit center group to the same profit center, but then also i receive the same reply.
Then i tried to make a new profit center & assign another group then also systems the same error with the message no. KMO19 or KM019
Please let me know where i am doing mistake due to which system shows me this error, so that i can rectify the same.
There is a sap tcode where we can see message details which we receive when shows an error. That tcode shows the detail of that messages, which will help to solve the problem there & that. Or please let me know how should I correct it.
Thanks & Best Regards,

Thank you very much Pradeep and Ley for your replies. By typing KCH3 I can see the Profit center group. But by typing KCH6N, it says you have not created the profit center hierarchy for my company code. While creating Profit Center it says that it can't take the Profit Center Group. And the error message is KM019. The message has no details attached to it. I am stuck over here and because of this error, I am not able to movie forward.
I would really appreciate If you could please guide me.
Thank you so much.
Edited by: mohitg7 on Feb 10, 2010 3:24 PM

Similar Messages

Segment field missing while creating profit center master data in SAP ECC6.

Hi,
I am working on ECC6.0 IDES. When I create profit center master I dont see the field for Segment on the profit center master.
Is there any setting which needs to be activated to see the the field for Segment on profit center master.
Regards,
Raghav

HI Raghavendra,
Check if the segmentation scenario is available for general ledger at the following path
Financial Accounting (New)>Ledgers> Fields > Customer Fields > Display Scenarios for General Ledger Accounting
Regards
Sach!n
Edited by: Sachin Bhutani on Mar 26, 2009 11:23 AM

BAPI to create Profit Center Budget

Hi friends,
Can anyone help me out with a BAPI /FM to create Profit Center Budget in FI& CO module.
Thanks in advance.

Hi,
I think there are no suitable BAPIs for this. You may try the BDC method for this.

Create profit center

How can i create profit center. Is there any tcode to create profit center.

Hi,
Enter the transaction code : KE51,
we can give the u r profit center ( As s per Business requirement)
and enter
enter the profit center name: long text, Analysis period:
Person resposible:
we can enter the Profit center group
after that we can activate the profit center ( left hand side Status button)
madhu

Should I create profit center for non-profit department?

Dear Experts,
Should I create profit center for non-profit department since I have cost-center for them (since I need to assgn the profit center in each cost center)?
regards,
Abraham

Dear Abraham,
You are saying that there is no Profit Generation in department. Then which Profit Center will handle the costs for this department. There should be a responsible Profit Center for this. Pl Check with your client.
I'll give you one example:
Basically Warehouse doesn't have revenue. But they have cost centers. All cost are beared by Head Office. In this situation.
Cost Center belongs to Warehouse will maintained by Head Office Profit Center..
Regards,
Balaji Bhonsle

Profit Center message display in MV45AFZZ

In include MV45AFZZ USEREXIT_SAVE_DOCUMENT_PREPARE I have added code to display information message if profit centre is initial/blank for any line item.
Suppose there are 3 line items for a sales order with line item 20 & 30 having profit centers as initial/blank. I get my information message displayed as Profit centre not maintained for line items: 20, 30. Then I press enter and it allows me to add profit centers for the missing line items.
I assign profit centre for line item 20 only and for line item 30 I want it to be blank. Then I save it.
Here comes my issue :
Again information message displays as u201C Profit centre not maintained for line item 30u201D. Unless I enter profit center value in line item 30 the message displays. If I enter some value and save it then document is saved.
I need the message to be displayed only once and user can enter missing profit centre for any line item & save it. Now its mandatory to enter profit center for all line items.
IF FLAG IS INITIAL.
LOOP AT xvbap.
IF xvbap-prctr IS INITIAL.
     lv_posnr = xvbap-posnr.
     CONDENSE lv_posnr.
     CALL FUNCTION 'BKK_DELETE_LEADING_ZERO'
        CHANGING
          c_field       = lv_posnr.
      IF lv_text IS NOT INITIAL.
        CONCATENATE lv_text lv_posnr into lv_text SEPARATED BY ','.
      ELSE.
        lv_text = lv_posnr.
      ENDIF.
ENDIF.
CLEAR lv_posnr .
ENDLOOP.
IF lv_text IS NOT INITIAL.
      fcode = 'ENT1'.
      CONCATENATE zmsg_txt lv_text INTO zmsg.
      message i000(ZZ) WITH zmsg.
         FLAG = 1.
         fcode = 'ENT1'.
         LEAVE TO SCREEN 4001.
   ENDIF.
ENDIF.
~Arya
Edited by: arya soumya on Feb 1, 2012 10:36 AM

Hi Soumya,
Giving a thought about the scenario you have explained, you need Message if profit centre is initial/blank for any line item.
I would suggest you another approach i do not know how far will it suffice your requirement,
Taking your example Suppose there are 3 line items for a sales order with line item 10, 20 & 30 having profit centers as initial/blank.
You want to assign profit centre for line item 20 only but not for line item 30 since you want it to be blank.
When you code anything with respect to the Profit Center of the Line Item, it will check for
if PC is not initial immaterial whether you want it to be blank or not and in all cases it will give you the message
Instead, create a program which will capture the Line Item number.
1) Give the Line Item numbers to the new Z program, and inside the program export the values to a memory id.
2) Import the same value in MV45AFZZ and then in XVBAP you already have the POSNR for which you want to SAVE inspite it is BLANK
3) if xvbap-posnr = g_import_posnr
    then dont give the error message.
    else.
    give the error message.
    endif
Revert for further clarification or is there any mistake in my understanding.
Thanks
Sri
endif.

How to deselect Multi Company when creating Profit center

Hi Experts,
We are working on MDG 7 FP2 with MDGF.
When we create a new profit center all 182 Company codes are automatically selected with the postable indicator. Initially the company codes are not available but when we select the check buton all company codes are pulled in and already selected.
Thus now we have to deselect each company code individually to ensure only the correct Company codes where it should post to are selected.
How do we deselect all and only select the applicable ones?
Thanks
Riaan

Hi Riaan,
this feature has been implemented due to feedback from various customers. The requirement was that all company codes that are assigned to the chosen controlling area are selected automatically. This is indeed a change of the UI behavior compared to older MDG-F releases, but as mentioned, this has been a strong requirement.
In addition, it is not valid to deselect all company codes since it is required to select at least a single entry. Therefore we do not offer a "deselect all" function.
The logic is implemented in class CL_MDGF_GUIBB_PCTR in method HANDLE_COMP_CODE_ASSIGNMTS. Of course you could change the behavior by implementing a new feeder class and redefining the method, but I would not recommend the same.
Best regards
Michael

How to create profit center in SAP Retail-IS

How to create new profit center in SAP retial?
please give me complete steps for create new profit center.
thnax in advance

Try this for A/R Invoice:
if @object_type = N'13' and @transaction_type in (N'A', N'U')
BEGIN
If exists (Select T0.DocEntry From INV1 T0
Where T0.DocEntry=@list_of_cols_val_tab_del and T0.Project
in ('P1', 'P2'))
Begin
Set @error = 13
Set @error_message = 'Project Code inactive!'
End
END

Problem in creating work center using bapi

hai all,
i am creating work center using " CRAP_WORKCENTER_CREATE ", it is also getting created successfully when I try to check CAPACITY for capacities and scheduling it is giving a error called.
" in table T006 entry is missing " . why it is comming like that.

Hi Goutam/Ram,
    I am trying to create capicity . I am useing CRAP_CAPACITY_CREATE .
   But I am getting so many errors. Is it the right Bapi or do know any other BAPI.
   We are trying to copy Capacities and work center from one plant to other.
Plz send if you any documentation or code. Also send work order creating code.
Thanks in Advance.

Creating Profit Center Accounts

Hi,
I am looking to create accounts in PCA. We have one company code, controlling area, so I am looking to have the same accounts/cost elements in PCA as in our chart of accounts.
Can someone tell me how to create the accounts/cost elements in PCA. I could see two transactions KE5B and KE61. These are looking for financial statement version and cost element groups to copy from. My questions are
1. Is it necessary that we have all the accounts in a financial statement version to copy them over to PCA using KE5B, or is it possible to copy the chart of accounts directly to PCA.
2. I see that plans and actuals are recorded againts accounts in PCA. Then, why do we need to have cost elements in PCA?
3. Are KE5B/KE61 the only transactions to create/assign accounts to PCA? Do we need to do anything in config to assign accounts to PCA.
Thanks for your help.
Ram

Hi Ram
Would like to share my views on the above
In PCA we can create accounts and accounts groups. The cost elements created in CCA can be created as accounts in PCA. These accounts / account groups can be used in PCA for PCA assessment cycles. So, GL expense items which are represented as cost elements in CCA are represented in PCA as accounts.
There are three sets of books maintained GL Financial Books of accounts, CCA cost accounting records, and PCA. PCA books are maintained in ledger 8A. We come across this ledger when we customize reports thru report painter where in most of the customized reports, I have considered parameters of 8A ledger references viz, controlling area, company code, currency etc although they are same these records are also transferred to 8A ledger in PCA.
Would like to share my experience wherein I have done planning in PCA with creation of accounts and account groups
1)Planning for material consumption accounts PC wise T code 7KE1
2)Planning for COGS PC wise Tcode : 7KE1
3)Planning for sales PC wise T Code : 7KE1
4)Planning for inventories which are also created as accounts - Tcode : 7KE3
The above planning can be manually entered or integrated thru excel planning or uploaded thru excel files. We have various options available
1) The reason to do the above planning was to have PC wise Planned P&L.
2) To ensure cost center planning values are posted to PCs executed TCode
1KE0 CO Plan Data under Plan data transfer. This transfers cost center plan data to PCs assigned in cost center master data record
3) Once above planning parameters are completed, PC assessment cycles were run for transferring expenses within PCs. These expenses could be viz, Marketing costs, Corporate costs and Adm costs which are not allocated or assessed thru cost center assessments
4) To have above planning process, defined separate SKFs for PCA assessments which formed as basis of allocation for expense transfer within PCA. Ex; Sales qty, etc
5) With the above data flow customized PCA reports were created thru report painter for plan and actual values and variances.
Manaul Planning process was carried out for all elements was done in PCA since other planning tools Integrated Planning LTP and SOP were not within the scope. If those tools were enables and certain planner profiles and forecasting profiles were created and data is transferred and integrated from either COPA or sales / logistics planning to SOP. SOP planned values are considered at all levels of planning covering, CCP, Activity planning, product costing, internal orders and finally profit planning is derived.
Where these planning tools are not there, PCA planning as mentioned was followed.
Appreciate if someone can confirm / correct my understanding on the above process. Looking forward for comments

Problem with Lenevo Solution Center message clearance

Hi,
My Lenovo solution center is howing me a message regarding one message in red bar for software updates and even after it gets updates it still the same and cannot remove that messae.
When i am trying to update it it opens a new window such like windows update and sows it is up to date.
Can anyone please advice me how to remove this message from the application.

It will launch the message, unless you have Windows update set to automatic.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

Profit center Document is not created for Balance sheet items

< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
Dear all,
Profit center document is not created for balance sheet accounts , where i specified in 3KEH (default profit center for balance sheet a/c's) , i did n't do any changes , if i do any changes in dev , then i will transport to quality there is no pending requests
Same entry In quality environment profit center is updating and creating profit center document for balance sheet accounts . I compared with actual posting settings like Maintain Document Types and Define Number Ranges for Local Documents but it is same as development
regards
Govind
Edited by: Govind Yadav on Sep 24, 2008 8:33 PM

Is any body find the solution of this problem
I am also facing the same problem Profit center document is not getting created from any MM document
3KEH configuration is there but still the system not generating the Profit center document for those materials where there is no profit center assigned in the material master data and in 3KEH i have configured that it should post to dummy if there is no profit center in the material master data
Please tell me if some one have the solution to this problem
Bilal

Profit center error message in VA01

Hi,
I am getting error message while creating sales order
" Profit center 2000/1500 does not exist for 08.11.2008 " - what could be reason ????
My material is T-AU214 in IDES sales org 1000, DC 12
Thanks,

Dear SM,
Profit center 1500 does not exist in controlling area 0001
Go to:
T. Code: KE51 - Create Profi Center
Key-in Controlling Area (say, 0001 in your case).
Next, Key-in Profit Center (i.e. 1500)
and either hit ENTER or Click Tab: Master Data
Once you enter, Maintain entries in respective Tabs:
1. General Data
2. Basic Data
3. Company Code
Also, when you maintain all the data, You just check with Tab: Period of Examination;
There, you maintain data -
--> Valid From
--> Valid To (as 31.12.9999)
and confirm.
Eventually, this must resolve your earlier error of:
Profit center 2000/1500 does not exist for 08.11.2008
Best Regards,
Amit
Note: This information is just for Knowledge-sake; but i must suggest that you should contact to your FI-Counterpart. Its always better if right person do the job.

Which FM to use while creating a Profit Center using LSMW BAPI

Which FM to use while creating a Profit Center using LSMW using BAPI: BUS0015

Hi,
For creating Profit centre using LSMW bapi method.
You need to give this values in the 1st step of LSMW.
Business Object       BUS0015
Method                    CREATE                                    Create
Message Type         PROFITCENTER_CREATE          Create profit center
Basic Type              PROFITCENTER_CREATE01      Create Profit Center
In We20 port creation use process code as BAPI
Regards,
Shan

What is the T-Code for creating Cost center - profit center standard hierar

Hi,
What is the T-Code for creating Cost center - profit center standard hierarchy.Please provide me the T-codes.
Thanks

Hi Supriya,
Create / Change Cost Center Standard Hierarchy - OKEON
Display Cost Center Standard Hierarchy - OKENN
Create Profit Center Standard Hierarchy - KCH1
Change Profit Center Standard Hierarchy - KCH5N
Display Profit Center Standard Hierarchy - KCH6N
Srikanth Munnaluri

Problems in creating Profit Center : Message KM019

Similar Messages

Maybe you are looking for