Problems in CUA..

Hello,
We are facing some problems with CUA setup.
Last week we removed a child system from CUA and changed its SID and now we are trying to add the system into CUA.
When the system is added through SCUA in Central system it goes fine without a single error, but the system is not found in SCUA list in child system. Also when we add the system with new SID in central system, it shows the old SID and not the new SID
under SAP Systems column.
We are able to transfer users from Central system but not able to modify users from Central system.
All steps were followed as per SAP docs when deleting the child system from CUA.
Could someone share your thoughts/ideas on the above problem.
Thanking you in advance.
Regards,
Yoganand.V

Hello,
Child system was deleted as per SAP docs. Why do I need to run RSDELCUA in child system?
The point I forgot to say is the system we copied (the old system) is still active in the landscape but not
connected to CUA. CUA is our SOLMAN system were we have SLD running, is this causing CUA to read the old systems
data. The new system is not added to SLD yet.
Please share your thoughts.
Regards,
Yoganand.V

Similar Messages

  • Problems with CUA

    Hi,
    I have a problem with the CUA.
    We have scheduled the report RBDAPP01 for IDoc inbound processing. Oubound IDOCs are triggered immediately. The job RBDAPP01 is scheduled every five minutes.
    We have scheduled the Report PFCG_TIME_DEPENDENCY as well once a day at 22:00.
    Role assignment is only allowed in the central system.
    Now, we have the problem, that an empolyee has deleted several roles. With the report RBDAPP01 this delete has taken affect. But at 22:05 the roles that were deleted before, were assigned to the user again.
    Do you have any idea about this effect?
    Best regards and thank you for your help.
    Bjoern

    Hi Bjoern,
    You are likely to get more help in the Security Forum.  This is for the SAP NetWeaver Identity Management tool.
    Best Regards,
    Matt

  • Problem with CUA

    Hi Team,
    we implemented CUA in our CRM system such as NCSCLNT300 was made as CUA and NCSCLNT200 as child system.
    CUA works well in most cases except for the below issue.
    1. For some roles available in client NCSCLNT200, when we try to add it to a user in CUA, system throws a error 'The central system does not have any information about the existence of role SAP_CRM_COMPETITOR in child system NCSCLNT200'
    we have performed a text comparison but it didn't help. Thanks to help.

    Hi,
    if the text comparison does not work, there are only 2 possible causes:
    1. the logical system name of the child system is not defined correctly (review table t000!)
    2. the rfc-connection from child to central system is not configured correctly.
    In most cases cause 1 is applicable. the fact, that you think that the text comparison works perfectly for other roles could be also that you have another system in the landscape with the same logical system name containing that same roles.
    Simple test: create  a role form scratch in child and trigger the text comparison direktly in pfcg of the child system.
    Is the role thena available in the central system?
    An indication for cause 2 would also be no confirmed status in SCUL.
    b.rgds, Bernhard

  • CUP:Deletion of account in CUA child system leaves system assignment in CUA

    Hello all CUP experts,
    I face a problem with CUA connected systems, more precisely in the account deletion process. The account is deleted in the CUA child system, but it leaves the system assignment in the CUA system.
    Is there a way to get CUP to delete also the CUA system assignment, which I understand has to happen before the child system account deletion?
    Br,
    Stefan Ericsson
    +358-50-4867527

    Hi Naveen,
    1. I have synchronized the company address in central system to all the child systems.
    2. This particular child system has an additional company address "XYZ" (which is causing the problem). This address is not being copied to the central system from transaction SCUG. It throws an error saying that the address is incorrect (Missing Country Information). So, when I want to edit the address to get this thing fixed, in the child system, it won't let me do that. I can neither edit it nor delete it. I get the error messages as I have posted earlier.
    So I have changed the company address of all the users who were using address "XYZ" to a different address so that I can delete the company address "XYZ". But, I am still not able to delete the address.
    If you could guide me on how can we edit or delete the company addresses in a  child system (other than from Transaction SUCOMP), it would be great.
    Thank You for your time on this thread.
    Any input I will appreciate.
    Jaya

  • CUA on SolMan, issue with BI

    Hi all,
    Question:
    My client wants a CUA on SolMan.
    When I set this up I stumble upon a small problem.
    CUA needs RFC connections to all connected clients, these RFC's should have the exact name of the Logical System Name of the client. Furthermore they need a user with specific authorizations in it.
    So for my system with SID SOL and productive client 100 I will get an RFC named:
    SOLCLNT100 (which is the same as the LS in SCC4).
    Now 100 is also my BI client, and it also uses this RFC.
    So configuring this like mentioned in the CUA setup guide gives me a conflict.....
    Any ideas or suggestions?
    Can I avoid issues by adding authorizations to the user configured in this RFC?

    Hi
    It is more logical if you would have create one separtate client in Solman and configure CUA there.Without affecting your already defined solman setup
    and the dedicated cua client helps your security gets fine go by giving only a respective peopke access the client, this close  lot of trouble.
    Jansi

  • CUA has lot of problems !! Please help

    Hello all,
    We have 10 systems(multiple clients in few systems) configured in CUA. Sometimes the roles dont get replicated, sometimes the IDOCs are not passed from parent to child,
    I added a new system to the Parent CUA and when I was assigning roles to a user for that child system thru CUA, the CUA surprisingly deleted all the other roles the user had in other system. The new system access was not touched
    *Question 1: I have 3 jobs running PFCG_TIME_DEPENDENCY, RBDAPP01 and SUSR_ZBV_GET_RECEIVER_PROFILES in all the child systems. I know PFCG is a needed job for user comparison. Do I need the other jobs ?*
    I have RBDAPP01 to process IDOCs and SUSR for the user comparison of roles.
    Since there are a lot of issues in our current CUA environment( our CUA is on Solution Manager 4.0), I am thinking of deleting the current CUA and configuring it again. Its very difficult to do trouble shooting going in SCUL logs and pin point what really happened.
    In RSDELCUA there are 3 options. Can I select " Delete CUA" and will it delete the CUA landscape or I would still need to go in WE20 and delete the partner profiles and do other steps?
    What I am looking for is a way where I can configure CUA from scratch by deleting the current CUA
    ( It sits on Sol Man 4.0). I am thinking if I configure if properly, it will function smoothly
    Any comments?

    Hi,
    "In RSDELCUA there are 3 options. Can I select " Delete CUA" and will it delete the CUA landscape or I would still need to go in WE20 and delete the partner profiles and do other steps?"
    For deactivating the Child system you need to run RSDELCUA from se38. We can delete the Child system from SCUA but that is not recomended. It creates a problem related to the Partner Profiles and related Ports for which the Icons in respective Child may not be active. For this we need to run WE20.
    The job PFCG* should be scheduled to run at a particular time. As for the other 2 jobs you mentioned I dont see any harm in running those but in most cases PFCG* is sufficient. (Ans to Ques 1).
    Any reason that you want to recreate the CUA? It may be the case that SCUM is not configured properly for the new system that you have added. Instead of starting from scratch I beleive its best you check with the new system where the other roles are getting deleted.
    Please let me know if any issue.
    Regards
    Aveek.

  • Could not access the central system - CUA problem

    Hi all,
    Please help me with this problem.
    Its just a test scenario, when everything will be good here, i have to do the same for Production.
    We just did upgrade our R3 system from 4.6 to ECC6.0.
    I created CUA on DB1100 ( Dev BW 4.6 ) with two child systems 1) DC1150 ( Dev CRM 4.6)
    2) DE1400 ( DEV ECC 6.0 ).
    Now everything is working fine between DB1100 and DC1150..
    It works like CUA ( DB1100) and child (DC1150) systems as it should be.
    But connection between DB1100 and DE1400 is not working fine. When you go to SU01 in DE1400, it does not allow me to change anything. It means connection is there and DB1100 is taking DE1400 as child system but when i am updating any user information or roles in DB1100 it is not updating child system DE1400.
    And when i went to tcode SCUA in DE1400 it gave me this error.
    "Could not access the central system DB1100".
    I dont know whats happening. I did same config in DE1400 as i did in DC1150. DC1150 is working fine but not DE1400. 
    The most weird thing is that DB1100 is thinking DE1400 as child system and i can not make any changes to DE1400 directly.
    please help me with this. What i can do to make this working between DB1100 and DE1400??
    i need to do the same in production if it gets passed.
    Thanks in Advance.

    Hi mala_swa,
    seems that you have a problem with the rfc-connections....
    Please check in both directions. The connection have to work without problems.
    Check SCUL in DB1100 - what is the status of the distributed users? Errors, unconfirmed?
    Check idocs in DE1400. Are there some? What is their status?
    The most common error is coming from not working rfc-connections. That brings for instance problems while generationg partner profiles, etc. Also the strict naming convention (log. system name=system name in CUA landscape = name of used RFC-connections) has to be considered....
    So that are some points, that you could check.
    good luck,
    Bernhard

  • CUA problem with composite role

    Hello experts, I have a problem with a composite role in my CUA parent system. If you look at the roles tab you will see one of the child roles has a name of child CUA system in the 'target sys' column. the rest all have 'user system'. Can anyone explain how this 'target sys' column is defined?
    Thanks
    Dave Wood

    I do not know if you have solved this issue, but the target system is defined within your single role on you menu tab.
    No what happens is that in transaction SM30 table SSM_RFC you define system variable linked to your logical system.
    This variable determines that when you import roles from another system by means of transaction PFCG > Read from other system from RFC and you select your variable the system will automatically default in the target system field the system it is suppose to go back to.
    So this way when you distibute the roles it will only go back to that particular target system, and you do not need to specify and guess where the role came from.
    Try removing that table entry in SM30 SSM_RFC and see if that way you will be able to remove the target system from the role.
    However it is not a bad thing to have activated. If you are working with position base authorizations and you have more than 1 system, you define 1 composite role for all the roles, for all the systems and you will be able to see where the composite resides by means of the target value.
    Hope this makes sense.
    Regards
    Sonja

  • LDAP CUA problem -- Could not logon to directory

    Hi Experts,
    I'm facing difficulties in accessing Active directory from SAP.
    The LDAP Connectors were setup correctly  (status with Green light).
    The System User were also setup as: UserID :DirectoryUser; Distinguished Name:"cn=DirectoryManager" (DirectoryManager is a username in my Active Directory)
    The LDAP Servers were also setup as: Hostname="sapserver001.abc.com", port number="389", Product name="MS03 Microsoft Windows 2003 Active Directory (Domain Mode)", Protocol Version="LDAP Version 3", LDAP Application="User", Base entry           ="ou=Company00", System Logon="DirectoryUser"
    But when I tried to logon the directory, system returns message:"Could not logon to directory"
    Could not logon to directory
    Message no. LDAPRC049
    Diagnosis
    The combination of user name (DN) and password transferred to the directory was not accepted by the directory.
    Procedure
    Check the set or entered data for the user and password for the directory.
    If you are using an application with which you do not need to enter this data directly, you can find the data as configuration setting in the LDAP server used ("System User" field).
    Procedure for System Administration
    Check whether you can log on to the directory with the entered data using the LDAP protocol.
    Note: A frequent error when using the Microsoft Active Directory is that the user enters their Microsoft Windows user name instead of the full Distinguished Name, since it is also possible to log on to the directory using this Microsoft Windows logon with Microsoft tools (such as ldp.exe). However, these tools do not use the user/password logon used by the SAP system.
    Could anyone help me find the solution?
    For more information, I'm using Windows server 2003 as my AD server.
    Ad server: sapserver001.abc.com
    sap server:sapserver002.abc.com
    In the control panel of sapserver001.abc.com., I open "Active Directory users and computers", within abc.com, I created an OU as "Company00", and under that OU, I created the InetOrgPerson "DirectoryManager".
    That's all the information I can provide.
    Any suggestions will be appreciated.
    Thank you very much in advance.
    Best regards,
    Nick

    Hi, all,
    Thanks for your reply.
    The problem has been solved. that's because I specified wrong user name, if I enter"DirectoryManager" instead of "cn=DirectoryManager" in the Distinguished Name field, it will be ok. or, I should input entire path "cn=DirectoryManager,OU=employees,DC=abci,DC=com".
    Just one more question: is there any tools or commands that can display the detail information of Active Directory on windows server 2003? I just wonder whether the detailed path like ""cn=DirectoryManager,OU=employees,DC=abci,DC=com"" can be shown by the tool or command.
    And I have run ABAP program RSLDAPSCHEMAEXT to get an LDIF file for SAP fields extention on AD server, after successfully imported into the Directory, where can I find out/verify the added fields which are coming from SAP?
    Sorry I'm lack of knowledge of Active Directory, any suggestions are appreciate.
    Best regards,
    Nick

  • SAP 4.7 Installation problem on Solaris 10 - Oracle 9.2.0.7

    Hi,
    I am trying to install SAP 4.7 on Solaris 10 - Oracle 9.2.0.7. I am using standar installation DVD for SAP 4.7 SR1. After installation I want to login SAP system I have an error about database inconsistency. System said that enter SICK transaction. I entered SICK and my error is "OS release SunOS 5.10 Generic_141444-09 sun4u is not support with this kernel". After I received this error I installed new kernel (221) and I upgaded kernel to 221. But after that I could not open SAP system. I checked dev_w1 and it is like below:
    "dev_w1" 456 lines, 18662 characters
    trc file: "dev_w1", trc level: 1, release: "640"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    M sysno      00
    M sid        KZP
    M systemid   370 (Solaris on SPARCV9 CPU)
    M relno      6400
    M patchlevel 0
    M patchno    221
    M intno      20020600
    M make:      single threaded, Unicode, 64 bit
    M pid        22022
    M
    M
    M Fri Jan 29 15:11:00 2010
    M  ***LOG Q01=> tskh_init, WPStart (Workproc 1 1 22022) [thxxhead.c   1144]
    M  calling db_connect ...
    C  Got ORACLE_HOME=/oracle/KZP/920_64 from environment
    C  got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPKZP's password
    C  Connecting as /@KZP on connection 0 (nls_hdl 0) ... (dbsl 640 070208)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1 0x10667d250 0x10668fcd0 0x10668f668
    C  Attaching to DB Server KZP (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8)
    C  Starting user session (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8,usrhp=0x10669a800)
    C  Now '/@KZP' is connected: con_hdl=0, nls_hdl=0, session_id=13.
    C  Got SAPKZP's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C  Close user session (con_hdl=0,svchp=0x10668f598,usrhp=0x10669a800)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPKZP/<pwd>@KZP on connection 0 (nls_hdl 0) ... (dbsl 640 070208)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1 0x10667d250 0x10668fcd0 0x10668f668
    C  Starting user session (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8,usrhp=0x10669a800)
    C  Now 'SAPKZP/<pwd>@KZP' is connected: con_hdl=0, nls_hdl=0, session_id=13.
    C  Database NLS settings: AMERICAN_AMERICA.UTF8
    C  DB instance KZP is running on sapkzpn2 with ORACLE version 9.2.0.7.0 since JAN 29, 2010, 15:10:46
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20100129 151100 sapkzpn2
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip
    ,.uue,.bz2,.iso,.sda,.sar,.gif
    I
    I Fri Jan 29 15:11:07 2010
    I  MtxInit: 1 0 0
    M  SHM_PRES_BUF                 (addr: 0xffffffff7597a000, size: 4400000)
    M  SHM_ROLL_AREA                (addr: 0xfffffffe56000000, size: 134217728)
    M  SHM_PAGING_AREA              (addr: 0xffffffff62000000, size: 67108864)
    M  SHM_ROLL_ADM                 (addr: 0xffffffff75db0000, size: 2672386)
    M  SHM_PAGING_ADM               (addr: 0xffffffff71f00000, size: 656416)
    M  ThCreateNoBuffer             allocated 572152 bytes for 1000 entries at 0xfffffffe4e004000
    M  ThCreateNoBuffer             index size: 3000 elems
    M  ThCreateVBAdm                allocated 12176 bytes (50 server) at 0xffffffff7bc00000
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 1 initializing ....
    X  Using implementation std
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 1, WP_CNT = 8, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 0xffffffff60000100, size: 30000000, end: 0xffffffff61c9c480)
    B  dbtbxbuf: Buffer TABLP (addr: 0xffffffff6d400100, size: 10240000, end: 0xffffffff6ddc4100)
    B  dbexpbuf: Buffer EIBUF (addr: 0xfffffffe5f800108, size: 4194304, end: 0xfffffffe5fc00108)
    B  dbexpbuf: Buffer ESM   (addr: 0xfffffffe5f000108, size: 4194304, end: 0xfffffffe5f400108)
    B  dbexpbuf: Buffer CUA   (addr: 0xfffffffe5101e108, size: 3072000, end: 0xfffffffe5130c108)
    B  dbexpbuf: Buffer OTR   (addr: 0xfffffffe5e800108, size: 4194304, end: 0xfffffffe5ec00108)
    M  rdisp/reinitialize_code_page -> 0
    M  icm/accept_remote_trace_level -> 0
    M  rdisp/no_hooks_for_sqlbreak -> 0
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S
    S Fri Jan 29 15:11:08 2010
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 0x106aa11e0
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 0xfffffffe51310070
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 0xfffffffe513103c8
    S    using messages for server info
    S  size of spec char cache entry: 297032 bytes (timeout 100 sec)
    S  size of open spool request entry: 2272 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A
    A Fri Jan 29 15:11:09 2010
    A
    A  -PXA--
    A  PXA INITIALIZATION
    A  System page size: 8kb, total admin_size: 5512kb, dir_size: 5480kb.
    I  *** ERROR => shmget(10006,153600000,2016) (22: Invalid argument) [shmux.c      1525]
    A  RABAX in run level 1
    A  RABAX in unkown environment: task_type=0, run level=1, rabax state=80000000 ztta_task_type=0
    [0] DoStack2 ( 0x105af7010, 0xffffffff7fffd740, 0x1004a4ae4, 0x0, 0x105dbb180, 0x102e2f6e0 ), at 0x1004a4ae4
    [1] CTrcStack2 ( 0x1036f6d60, 0x0, 0x17400, 0x102e947dc, 0x0, 0x102e2f6e0 ), at 0x1004a4680
    [2] __1cXrabax_CStackToTraceFile6F_v_ ( 0x0, 0x1, 0x0, 0x3097000, 0x100000000, 0x103097058 ), at 0x100ae0e80
    [3] __1cKrabax_init6FpkH_v_ ( 0x102002ad8, 0x0, 0x1, 0x0, 0x0, 0x0 ), at 0x100ad97d8
    [4] ab_rabax ( 0x0, 0x80000000, 0x6da, 0x103879400, 0x1880, 0x1065e4110 ), at 0x100acfe3c
    [5] __1cJab_pbinit6F_v_ ( 0x100000000, 0x102e947dc, 0x1, 0x102002ab4, 0x102f4e1c0, 0x103815550 ), at 0x100750de0
    [6] ab_init ( 0x0, 0x5bd5000, 0xac8800, 0x5bd5000, 0x1, 0x0 ), at 0x100ac8d34
    [7] ThrInitRunTime ( 0x100489c00, 0x489c00, 0x332c400, 0x102e94820, 0x1, 0x102e947d4 ), at 0x100476e84
    [8] ThStartUp2 ( 0x101fec800, 0x194c800, 0x100000000, 0x102e947d4, 0x0, 0x10194cc00 ), at 0x100415860
    [9] tskh_init ( 0x2e7a000, 0x1, 0x1, 0x540, 0x102e94400, 0x15 ), at 0x100260f14
    [10] tskhstart ( 0x0, 0x2e94400, 0x0, 0x1003d6400, 0x3d6400, 0x100000000 ), at 0x10025cf9c
    [11] DpMain ( 0x3641400, 0x2e7a000, 0x100000000, 0x1, 0x0, 0x0 ), at 0x1001856c0
    A
    A Fri Jan 29 15:11:10 2010
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX failed.
    A  *** suicide ON
    A  ** RABAX: level LEV_RX_VMIT_CLEANUP entered.
    A  ** RABAX: level LEV_RX_VMIT_CLEANUP completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD failed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    X  *** ERROR => invalid MM administration (adm) (nil)  (admCheck)(nil) [mmxx.c       2127]
    A  ** RABAX: level LEV_RX_WRITE_SNAP failed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  Fri Jan 29 15:11:10 2010
    A
    A  Error Code PXA_NO_SHARED_MEMORY.
    A  Module  $Id: //bas/640_REL/src/krn/runt/abload3.c#44 $ SAP.
    A  Function ab_pbinit Line 1754.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS failed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end RX_SUICIDE
    A  Shared Memory von 150000 Kilo-Bytes f\303\274r PXA nicht verf\303\274gbar..
    A
    A  *
    A  * Non recoverable error. Aborting process...
    A  *
    M  ***LOG R63=> ThWpHalt, halt wp () [thxxhead.c   15213]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThWpHalt: halt wp (step 1, th_errno 5, action 2, level 1) [thxxhead.c   9696]
    M
    M  Info for wp 1
    M
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = 1
    M    mode = 0
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M
    M
    M  PfStatDisconnect: disconnect statistics
    M  ThIErrHandle: action changed to 2
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
    M  TrThHookFunc: called for WP dump
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  255]
    M  Entering ThSetStatError
    M  ThErrPrivHandle: set th_errno (5)
    M  Entering ThReadDetachMode
    M  *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (5), detach T1/M0 [thxxhead.c   10129]
    M
    M  Modeinfo for User T1/M0
    M
    M
    M  call ThrShutDown (1)...
    A  Saving PXA statistics.
    M  -
    C-STACK -
    [0] __1cNab_pxasavedir6F_i_ ( 0x102e94400, 0x2f63c00, 0x102e94800, 0x10200b800, 0x1, 0x0 ), at 0x10076c108
    [1] ab_shutdown ( 0x0, 0x1, 0x102f3b400, 0x1, 0x102e94400, 0x2e94400 ), at 0x100aca150
    [2] ThIErrHandle ( 0x10251b400, 0x2e94800, 0x102e7a324, 0x2, 0x2e94400, 0x102e94800 ), at 0x100293870
    M  -
    M  ***LOG Q0E=> SigIGenAction, signal ( 11) [sigux.c      902]
    M  in_ThErrHandle: 2
    M  ***LOG R0H=> ThIErrHandle, Loop in ThErrHandle, restart wp () [thxxhead.c   9717]
    M  -
    C-STACK -
    [0] DoStack2 ( 0x105af7010, 0xffffffff7fffc340, 0x1004a4ae4, 0x0, 0x105dbac40, 0x102e2f6e0 ), at 0x1004a4ae4
    [1] CTrcStack2 ( 0x1036f6d00, 0x0, 0x17400, 0x102e947dc, 0x10049d16c, 0x102e2f6e0 ), at 0x1004a4680
    [2] ThIErrHandle ( 0x0, 0x100000000, 0x3, 0x10331ff08, 0xb, 0x4 ), at 0x100291b08
    [3] SigIGenAction ( 0x102c9f800, 0x1032acd04, 0x102c9f800, 0xb, 0x102e94820, 0x102e947d4 ), at 0x101e49c4c
    [4] __sighndlr ( 0xb, 0xffffffff7fffcf80, 0xffffffff7fffcca0, 0x101e493bc, 0x0, 0x0 ), at 0xffffffff7c7d62e0
    [5] call_user_handler ( 0xffffffff7d300200, 0xffffffff7d300200, 0xffffffff7fffcca0, 0x19, 0x0, 0x0 ), at 0xffffffff7c7c9e44
    [6] sigacthandler ( 0x0, 0xffffffff7fffcf80, 0xffffffff7fffcca0, 0xffffffff7d300200, 0x0, 0xffffffff7c93c000 ), at 0xffffffff7c7ca03
    c
    [7] __1cNab_pxasavedir6F_i_ ( 0x102e94400, 0x2f63c00, 0x102e94800, 0x10200b800, 0x1, 0x0 ), at 0x10076c0f4
    [8] ab_shutdown ( 0x0, 0x1, 0x102f3b400, 0x1, 0x102e94400, 0x2e94400 ), at 0x100aca150
    [9] ThIErrHandle ( 0x10251b400, 0x2e94800, 0x102e7a324, 0x2, 0x2e94400, 0x102e94800 ), at 0x100293870
    [10] __1cIrabax_do6FpkHpHi_v_ ( 0x102002ad8, 0x0, 0x41, 0x102e94800, 0x1, 0x1 ), at 0x100adc154
    [11] ab_rabax ( 0x2, 0x2e94800, 0x1, 0x100000000, 0x2e94400, 0x2e94400 ), at 0x100ad3bc4
    M  -
    M Fri Jan 29 15:11:11 2010
    M  ThSigHandler: signal (step 1, th_errno 11, action 4)
    M
    M  Info for wp 1
    M
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = 1
    M    mode = 0
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M  PfStatDisconnect: disconnect statistics
    M  Entering ThSetStatError
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 1 22022) [dpuxtool.c   318]
    Also I tried to change SAPEXE.SAR and SAPEXEDB.SAR files from SAP Kernel CD. After that I started installation again. But I have same error. SAP system didn't work.
    How can I solve this error?Cannot I install SAP 4.7 SR1 on Solaris 10 - ORacle 9.2.0.7?Is the problem about SAP profile parameters or Solaris Kernel parameters
    Best regards,

    Also dev_disp is like below:
    sid        KZP
    systemid   370 (Solaris on SPARCV9 CPU)
    relno      6400
    patchlevel 0
    patchno    221
    intno      20020600
    make:      single threaded, Unicode, 64 bit
    pid        22016
    ***LOG Q00=> DpSapEnvInit, DPStart (00 22016) [dpxxdisp.c   1104]
            shared lib "dw_xml.so" version 221 successfully loaded
            shared lib "dw_xtc.so" version 221 successfully loaded
            shared lib "dw_stl.so" version 221 successfully loaded
            shared lib "dw_gui.so" version 221 successfully loaded
            shared lib "dw_mdm.so" version 221 successfully loaded
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpIPCInit2: start server >sapkzpn2_KZP_00                         <
    DpShMCreate: sizeof(wp_adm)             10752   (1344)
    DpShMCreate: sizeof(tm_adm)             3728952 (18552)
    DpShMCreate: sizeof(wp_ca_adm)          31200   (104)
    DpShMCreate: sizeof(appc_ca_adm)        10400   (104)
    DpShMCreate: sizeof(comm_adm)           316000  (632)
    DpShMCreate: sizeof(vmc_adm)            0       (560)
    DpShMCreate: sizeof(wall_adm)           (40056/36728/88/192)
    DpShMCreate: SHM_DP_ADM_KEY             (addr: 0xffffffff70c00000, size: 4181592)
    DpShMCreate: allocated sys_adm at 0xffffffff70c00000
    DpShMCreate: allocated wp_adm at 0xffffffff70c01c88
    DpShMCreate: allocated tm_adm_list at 0xffffffff70c04688
    DpShMCreate: allocated tm_adm at 0xffffffff70c046b0
    DpShMCreate: allocated wp_ca_adm at 0xffffffff70f92ce8
    DpShMCreate: allocated appc_ca_adm at 0xffffffff70f9a6c8
    DpShMCreate: allocated comm_adm_list at 0xffffffff70f9cf68
    DpShMCreate: allocated comm_adm at 0xffffffff70f9cf80
    DpShMCreate: allocated vmc_adm_list at 0xffffffff70fea1e0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0xffffffff70fea208
    DpShMCreate: allocated wall_adm at 0xffffffff70fea210
    MBUF state OFF
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation std
    EsIUnamFileMapInit: ES base = 0x0xfffffffe60000000
    EsStdInit: Extended Memory 4092 MB allocated
    <ES> 1022 blocks reserved for free list.
    ES initialized.
    Fri Jan 29 15:11:07 2010
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c   1490]
    ***LOG Q0K=> DpMsAttach, mscon ( sapkzpn2) [dpxxdisp.c   10127]
    DpStartStopMsg: send start message (myname is >sapkzpn2_KZP_00                         <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    Fri Jan 29 15:11:08 2010
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 221
    Release check o.K.
    Fri Jan 29 15:11:29 2010
    ERROR => W0 (pid 22021) died [dpxxdisp.c   12698]
    ERROR => W2 (pid 22023) died [dpxxdisp.c   12698]
    my types changed after wp death/restart 0xbf --> 0xbd
    ERROR => W3 (pid 22024) died [dpxxdisp.c   12698]
    my types changed after wp death/restart 0xbd --> 0xb9
    ERROR => W4 (pid 22025) died [dpxxdisp.c   12698]
    ERROR => W5 (pid 22028) died [dpxxdisp.c   12698]
    my types changed after wp death/restart 0xb9 --> 0xb1
    ERROR => W6 (pid 22030) died [dpxxdisp.c   12698]
    my types changed after wp death/restart 0xb1 --> 0xa1
    ERROR => W7 (pid 22038) died [dpxxdisp.c   12698]
    my types changed after wp death/restart 0xa1 --> 0x81
    Fri Jan 29 15:12:08 2010
    ERROR => W1 (pid 22022) died [dpxxdisp.c   12698]
    my types changed after wp death/restart 0x81 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    killing W0-22021 (SIGUSR2)
    ERROR => DpWpKill(22021, SIGUSR2) failed [dpxxtool.c   2508]
    killing W1-22022 (SIGUSR2)
    ERROR => DpWpKill(22022, SIGUSR2) failed [dpxxtool.c   2508]
    killing W2-22023 (SIGUSR2)
    ERROR => DpWpKill(22023, SIGUSR2) failed [dpxxtool.c   2508]
    killing W3-22024 (SIGUSR2)
    killing W7-22038 (SIGUSR2)
    ERROR => DpWpKill(22038, SIGUSR2) failed [dpxxtool.c   2508]
    NiWait: sleep (10000 msecs) ...
    NiISelect: timeout 10000 ms
    NiISelect: maximum fd=15
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Jan 29 15:12:18 2010
    NiISelect: TIMEOUT occured (10000 ms)
    dump system status
    Workprocess Table (long)                        Fri Jan 29 09:12:18 2010
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA    22021 Ended         no      1   0            78             SAPSYS
    1 DIA    22022 Ended         no      1   0            78             SAPSYS
    2 UPD    22023 Ended         no      1   0            78             SAPSYS
    3 ENQ    22024 Ended         no      1   0            78             SAPSYS
    4 BTC    22025 Ended         no      1   0            78             SAPSYS
    5 BTC    22028 Ended         no      1   0            78             SAPSYS
    6 SPO    22030 Ended         no      1   0            71             SAPSYS
    7 UP2    22038 Ended         no      1   0            71             SAPSYS
    Dispatcher Queue Statistics                     Fri Jan 29 09:12:18 2010
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    3
    2000
    10
    10
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id               13
    wake_evt_udp_now        0
    wake events             total     9,  udp     6 ( 66%),  shm     3 ( 33%)
    since last update       total     9,  udp     6 ( 66%),  shm     3 ( 33%)
    Dump of tm_adm structure:                       Fri Jan 29 09:12:18 2010
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks                   Fri Jan 29 09:12:18 2010
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000 msecs) ...
    NiISelect: timeout 5000 ms
    NiISelect: maximum fd=15
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Jan 29 15:12:23 2010
    NiISelect: TIMEOUT occured (5000 ms)
    DpHalt: shutdown server >sapkzpn2_KZP_00                         < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmKeySharedMMU( 57 ) = 0 (octal)
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmKeySharedMMU( 57 ) = 0 (octal)
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes...
    Stop gateway
    killing proc (22019) (SOFT_KILL)
    Stop icman
    killing proc (22020) (SOFT_KILL)
    Terminate gui connections
    kill(22019,0) successful -> process alive
    waiting for termination of gateway
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=15
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri Jan 29 15:12:24 2010
    NiISelect: TIMEOUT occured (1000 ms)
    kill(22019,0) -> ESRCH: process died
    kill(22020,0) -> ESRCH: process died
    DpHalt: cancel all lcom connections
    MPI CancelAll 2 -> 0
    MPI DeleteAll 2 -> 0
    DpStartStopMsg: send stop message (myname is >sapkzpn2_KZP_00                         <)
    NiIMyHostName: hostname = 'sapkzpn2'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 163 bytes
    NiBufSend starting
    NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name          -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
    NiBufIn: NIBUF len=229
    NiBufIn: Packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 229 bytes
    MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
    DpHalt: received 119 bytes from message server
    NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
    NiBufIn: NIBUF len=229
    NiBufIn: Packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 229 bytes
    MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
    DpHalt: received 119 bytes from message server
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    cleanup event management
    cleanup shared memory/semaphores
    ShmCleanup SHM_SYS_ADM_KEY
    ShmCleanup( 1 )
    ShmCreate( 1, 0, 2, 0x0xffffffff7fffeab8 )
    ShmProtect( 1, 3 )
    ShmKeySharedMMU( 1 ) = 0 (octal)
    ShmCreate( 1, 0, 2, -> 0x0xffffffff7b100000 )
    ShmCleanup SHM_DP_ADM_KEY
    ShmCleanup( 2 )
    ShmCreate( 2, 0, 2, 0x0xffffffff7fffeab8 )
    ShmProtect( 2, 3 )
    ShmKeySharedMMU( 2 ) = 0 (octal)
    ShmCreate( 2, 0, 2, -> 0x0xffffffff70c00000 )
    ShmCleanup SHM_DP_CA_KEY
    ShmCleanup( 3 )
    ShmCreate( 3, 0, 2, 0x0xffffffff7fffeab8 )
    ShmProtect( 3, 3 )
    ShmKeySharedMMU( 3 ) = 0 (octal)
    ShmCreate( 3, 0, 2, -> 0x0xffffffff6fc00000 )
    ShmCleanup SHM_PF_KEY
    ShmCleanup( 4 )
    ShmCreate( 4, 0, 2, 0x0xffffffff7fffeab8 )
    ShmKeyPermission( 4 ) = 0740 (octal)
    ShmKeySharedMMU( 4 ) = 0 (octal)
    ShmProtect( 4, 3 )
    ShmKeySharedMMU( 4 ) = 0 (octal)
    ShmCreate( 4, 0, 2, -> 0x0xffffffff71f00000 )
    ShmCleanup SHM_PRES_BUF
    ShmCleanup( 14 )
    ShmCreate( 14, 0, 2, 0x0xffffffff7fffeab8 )
    ShmGet( 10, 14, 0, 2, 0x0xffffffff7fffe970 )
    ShmGet( 10, 14, 0, 2, -> 0x0xffffffff7597a000 )
    ShmProtect( 14, 3 )
    ShmProtect: Key=14 not attached
    ShmProtect( 14, 3 )
    ShmCreate( 14, 0, 2, -> 0x0xffffffff7597a000 )
    ShmCleanup SHM_CALI_BUFFER
    ShmCleanup( 11 )
    ShmCreate( 11, 0, 2, 0x0xffffffff7fffeab8 )
    ShmGet( 10, 11, 0, 2, 0x0xffffffff7fffe970 )
    ShmGet( 10, 11, 0, 2, -> 0x0xffffffff76040000 )
    ShmProtect( 11, 3 )
    ShmProtect: Key=11 not attached
    ShmProtect( 11, 3 )
    ShmCreate( 11, 0, 2, -> 0x0xffffffff76040000 )
    ShmCleanup SHM_DB_TBUFF
    ShmCleanup( 19 )
    ShmCreate( 19, 0, 2, 0x0xffffffff7fffeab8 )
    ShmKeyPermission( 19 ) = 0740 (octal)
    ShmKeySharedMMU( 19 ) = 0 (octal)
    ShmProtect( 19, 3 )
    ShmKeySharedMMU( 19 ) = 0 (octal)
    ShmCreate( 19, 0, 2, -> 0x0xffffffff66000000 )
    ShmCleanup SHM_DB_TBUFF_P
    ShmCleanup( 33 )
    ShmCreate( 33, 0, 2, 0x0xffffffff7fffeab8 )
    ShmKeyPermission( 33 ) = 0740 (octal)
    ShmKeySharedMMU( 33 ) = 0 (octal)
    ShmProtect( 33, 3 )
    ShmKeySharedMMU( 33 ) = 0 (octal)
    ShmCreate( 33, 0, 2, -> 0x0xffffffff70400000 )
    ShmCleanup SHM_DB_STBUFF
    ShmCleanup( 41 )
    ShmCreate( 41, 0, 2, 0x0xffffffff7fffeab8 )
    ShmKeyPermission( 41 ) = 0740 (octal)
    ShmKeySharedMMU( 41 ) = 0 (octal)
    ShmProtect( 41, 3 )
    ShmKeySharedMMU( 41 ) = 0 (octal)
    ShmCreate( 41, 0, 2, -> 0x0xffffffff66800000 )
    ShmCleanup SHM_DB_TTBUFF
    ShmCleanup( 42 )
    ShmCreate( 42, 0, 2, 0x0xffffffff7fffeab8 )
    ShmGet( 40, 42, 0, 2, 0x0xffffffff7fffe970 )
    ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
    ShmKeyPermission( 40 ) = 0740 (octal)
    ShmKeySharedMMU( 40 ) = 0 (octal)
    ShmProtect( 40, 3 )
    ShmCreate( 40, 0, 2, -> 0x0xffffffff60000000 )
    ShmGet( 40, 42, 0, 2, -> 0x0xffffffff62972000 )
    ShmProtect( 42, 3 )
    ShmProtect: Key=42 not attached
    ShmProtect( 42, 3 )
    ShmCreate( 42, 0, 2, -> 0x0xffffffff62972000 )
    ShmDelete( 40 )
    ShmCleanup SHM_DB_FTBUFF
    ShmCleanup( 43 )
    ShmCreate( 43, 0, 2, 0x0xffffffff7fffeab8 )
    ShmGet( 40, 43, 0, 2, 0x0xffffffff7fffe970 )
    ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
    ShmKeyPermission( 40 ) = 0740 (octal)
    ShmCleanup SHM_DB_SNTBUFF
    ShmCleanup( 45 )
    ShmCreate( 45, 0, 2, 0x0xffffffff7fffeab8 )
    ShmGet( 40, 45, 0, 2, 0x0xffffffff7fffe970 )
    ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
    ShmKeyPermission( 40 ) = 0740 (octal)
    ShmCleanup SHM_DB_IRBUFF
    ShmCleanup( 44 )
    ShmCreate( 44, 0, 2, 0x0xffffffff7fffeab8 )
    ShmGet( 40, 44, 0, 2, 0x0xffffffff7fffe970 )
    ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
    ShmKeyPermission( 40 ) = 0740 (octal)
    ShmCleanup SHM_DB_OBJ_BUFFER
    ShmKeySharedMMU( 31 ) = 0 (octal)
    ShmCreate( 31, 0, 2, -> 0x0xffffffff6f400000 )
    closing connect handles (dgm + tcp)
    DpDelSocketInfo: del info for socket 1 (type=2)
    NiICloseHandle: shutdown and close hdl 1 / socket 8
    DpDelSocketInfo: del info for socket 2 (type=1)
    NiBufClose: clear extensions for hdl 2
    NiBufSetStat: bufstat of hdl 2 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 2 / socket 9
    ***LOG Q05=> DpHalt, DPStop ( 22016) [dpxxdisp.c   9033]
    shutdown completed - server stopped ***
    Good Bye .....
    Could you please help me about this issue?
    Best regards

  • Dispatche problem

    Hi
    I have ECC6 IDES version was working fine last 3 months . i have just added two profiles in RZ10
    login/accept_sso2_ticket = 1
    login/create_sso2_ticket = 2
    it was not reflecting on so i thought i will restart server so i did it. since then my server is always in yellow state. my Abap , J2ee table are blank and i monitored couple of time when i start server first all table start in RUN state then Ended and disappears then dispatcher goes stopped.
    Things i did to resolve this but didn't work
    1) tryed to revert back old profiles in OS level
    2) Increases j2ee time out ( 600 to 6000)
    3) started data base at command level using connect/@ PIS as sydba and the mounted database and then started management consol but still same problem continues.
    Can some one help me quickly ...
    trc file: "dev_w0", trc level: 1, release: "700"
    M 
    M Tue Sep 25 11:14:07 2012
    M  calling db_connect ...
    C  Prepending D:\usr\sap\PIS\DVEBMGS40\exe to Path.
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPSR3's password
    C  Connecting as /@PIS on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1 00000000130F28C0 000000000A7B33C0 000000000A7B8BE8
    C  Attaching to DB Server PIS (con_hdl=0,svchp=000000000A7B8AA8,svrhp=0000000013111918)
    C  Starting user session (con_hdl=0,svchp=000000000A7B8AA8,srvhp=0000000013111918,usrhp=000000000A7B3BD8)
    C  Now '/@PIS' is connected (con_hdl 0, nls_hdl 0).
    C  Got SAPSR3's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=000000000A7B8AA8,usrhp=000000000A7B3BD8)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPSR3/<pwd>@PIS on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1 00000000130F28C0 000000000A7B33C0 000000000A7B8BE8
    C  Starting user session (con_hdl=0,svchp=000000000A7B8AA8,srvhp=0000000013111918,usrhp=000000000A7B3BD8)
    C  Now 'SAPSR3/<pwd>@PIS' is connected (con_hdl 0, nls_hdl 0).
    C  Database NLS settings: AMERICAN_AMERICA.UTF8
    C  Database instance PIS is running on DEVSYS with ORACLE version 10.2.0.1.0 since 20120924
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20120925 111407 DEVSYS         
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF               (addr: 0000000014E30050, size: 4400000)
    M  SHM_ROLL_AREA          (addr: 000007FFE6D00050, size: 268435456)
    M  SHM_PAGING_AREA          (addr: 0000000015270050, size: 134217728)
    M  SHM_ROLL_ADM               (addr: 000000001D280050, size: 2678942)
    M  SHM_PAGING_ADM          (addr: 000000001D510050, size: 525344)
    M  ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 000000001D5A0050
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 12176 bytes (50 server) at 000000000FFD0050
    X  EmInit: MmSetImplementation( 2 ).
    X  MM diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 13, CON_ID = -1
    B 
    B Tue Sep 25 11:14:08 2012
    B  dbtbxbuf: Buffer TABL  (addr: 0000000022E40160, size: 30000000, end: 0000000024ADC4E0)
    B  dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 14206976
    B  ***LOG BB0=> buffer TABL       started with length 30000000   bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
    B  dbtbxbuf: Buffer TABLP (addr: 0000000024AE0160, size: 10240000, end: 00000000254A4160)
    B  dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 5032704
    B  ***LOG BB0=> buffer TABLP      started with length 10240000   bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
    B  dbtbxbuf: Reading TBX statistics:
    B  dbtbxbuf: 0 object entries precreated
    B  Layout of EIBUF buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 400 = 400
    B  2: 13 * 40 = 520
    B  3: 4001 * 48 = 192048
    B  4: 2000 * 256 = 512000
    B  5: 4001 * 8 = 32008
    B  6: 1 * 200 = 200
    B  7: 65 * 8 = 520
    B  8: 13502 * 256 = 3456512
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    B  dbexpbuf: Buffer EIBUF (addr: 00000000254B0170, size: 4194304, end: 00000000258B0170)
    B  ***LOG BB0=> buffer EIBUF      started with length 4096k      bytes [dbexpbuf#1 @ 2322] [dbexpbuf2322 ]
    B  Layout of ESM   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 400 = 400
    B  2: 13 * 40 = 520
    B  3: 4001 * 48 = 192048
    B  4: 2000 * 256 = 512000
    B  5: 4001 * 8 = 32008
    B  6: 1 * 200 = 200
    B  7: 65 * 8 = 520
    B  8: 13502 * 256 = 3456512
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    B  dbexpbuf: Buffer ESM   (addr: 00000000258C0170, size: 4194304, end: 0000000025CC0170)
    B  ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#1 @ 2322] [dbexpbuf2322 ]
    B  Layout of CUA   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 400 = 400
    B  2: 13 * 40 = 520
    B  3: 3001 * 48 = 144048
    B  4: 1500 * 256 = 384000
    B  5: 3001 * 8 = 24008
    B  6: 1 * 200 = 200
    B  7: 193 * 8 = 1544
    B  8: 4916 * 512 = 2516992
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    B  dbexpbuf: Buffer CUA   (addr: 0000000025CD0170, size: 3072000, end: 0000000025FBE170)
    B  ***LOG BB0=> buffer CUA        started with length 3000k      bytes [dbexpbuf#1 @ 2322] [dbexpbuf2322 ]
    B  Layout of OTR   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 400 = 400
    B  2: 13 * 40 = 520
    B  3: 4001 * 48 = 192048
    B  4: 2000 * 256 = 512000
    B  5: 4001 * 8 = 32008
    B  6: 1 * 200 = 200
    B  7: 81 * 8 = 648
    B  8: 13501 * 256 = 3456256
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    B  dbexpbuf: Buffer OTR   (addr: 0000000025FC0170, size: 4194304, end: 00000000263C0170)
    B  ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#1 @ 2322] [dbexpbuf2322 ]
    B  ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#1 @ 2206] [dbcalbuf2206 ]
    B  dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
    B   max_blocking_factor =  15,  max_in_blocking_factor      =   5,
    B   min_blocking_factor =  10,  min_in_blocking_factor      =   5,
    B   prefer_union_all    =   0,  prefer_join                 =   0,
    B   prefer_fix_blocking =   0,  prefer_in_itab_opt          =   1,
    B   convert AVG         =   0,  alias table FUPD            =   0,
    B   escape_as_literal   =   1,  opt GE LE to BETWEEN        =   0,
    B   select *            =0x0f,  character encoding          = STD / <none>:-,
    B   use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
    B                         rule_fae->0, concat_fae->0, concat_fae_or->0
    M  SecAudit(RsauInit): Start init of Security Audit Log for first wp.
    M  SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
    M  SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1160, total = 3064
    M  SecAudit(RsauShmInit): SCSA size................ = 4096
    M  SecAudit(RsauShmInit): addr of SCSA............. = 000000000AAF0050
    M  SecAudit(RsauShmInit): addr of RSAUSHM.......... = 000000000AAF07C0
    M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 000000000AAF0800
    M  SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 000000000AAF080C
    M  SecAudit(RsauShmInit): SHM version.............. = 5
    M  SecAudit(RsauShmInit): SHM Slot version......... = 2
    M  SecAudit(RsauShmInit): RSAU active.............. = 0
    M  SecAudit(RsauShmInit): number of slots possible. = 10
    M  SecAudit(RsauShmInit): number of slots requested = 2
    M  SecAudit(RsauShmInit): number of slots used..... = 2
    M  SecAudit(RsauShmInit): user selection........... = 0
    M  SecAudit(RsauShmInit): max size of one file..... = 0 KB
    M  SecAudit(RsauShmInit): max size of all files.... = 102400 KB
    M  SecAudit(RsauGetCurrentProfile): Init of shared memory completed
    M  SecAudit(RsauGetCurrentProfile): Security Audit Log not active
    M  SsfSapSecin: automatic application server initialization for SAPSECULIB
    N  SsfSapSecin: Looking for PSE in database
    N  SsfPseLoad: started...(path=D:\usr\sap\PIS\DVEBMGS40\sec, AS=devsys, instanceid=40)
    N  SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec (client:    , key: 102635, len: 14851)
    N  SsfPseLoadFile: Couldn't open file D:\usr\sap\PIS\DVEBMGS40\sec: Permission denied
    N  SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPELEARN200.pse (client:    , key: 172011, len: 1348)
    N  SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSNCS.pse (client:    , key: 025318, len: 804)
    N  SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSSLA.pse (client:    , key: 025401, len: 2838)
    N  SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSSLC.pse (client:    , key: 025427, len: 3080)
    N  SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSSLS.pse (client:    , key: 025344, len: 1465)
    N  SsfPseLoad: Downloading file D:\usr\sap\PIS\DVEBMGS40\sec\SAPSYS.pse (client:    , key: SYSPSE, len: 14851)
    N  SsfPseLoad: ended (6 of 7 sucessfully loaded, 8 checked...
    N  MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
    N  MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
    M  rdisp/reinitialize_code_page -> 0
    M  icm/accept_remote_trace_level -> 0
    M  rdisp/no_hooks_for_sqlbreak -> 0
    N  SncInit(): Initializing Secure Network Communication (SNC)
    N        PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/64/64)
    N  SncInit():   found snc/data_protection/max=3, using 3 (Privacy Level)
    N  SncInit():   found snc/data_protection/min=2, using 2 (Integrity Level)
    N  SncInit():   found snc/data_protection/use=9, using 3 (Privacy Level)
    N  SncInit(): found  snc/gssapi_lib=path_to_SAPCRYPTOLIB
    M  *** ERROR => DlLoadLib: LoadLibrary(path_to_SAPCRYPTOLIB) Error 126 [dlnt.c       237]
    M          Error 126 = "The specified module could not be found."
    N  *** ERROR => SncPDLInit(): DlLoadLib("path_to_SAPCRYPTOLIB")=DLENOACCESS
    N   [sncxxdl.0340]*** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) path_to_SAPCRYPTOLIB not loaded
    N   [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
    N           sec_avail = "false"
    M  ***LOG R19=> ThSncInit, SncInitU ( SNC-000001) [thxxsnc.c    230]
    M  *** ERROR => ThSncInit: SncInitU (SNCERR_INIT) [thxxsnc.c    232]
    M  in_ThErrHandle: 1
    M  *** ERROR => SncInitU (step 1, th_errno 44, action 3, level 1) [thxxhead.c   10019]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = V-1
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
    M  TrThHookFunc: called for WP dump
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 1680) [dpnttool.c   327]
    Regards
    Babu

    Problem solve by taking out SNC profile

  • Problem with SolMan installation on Windows x64

    I'm stuck at step 35 "Change default passwords". Anyone know what wrong?
    INFO 2008-11-28 18:23:07.234
    Executing function call SUSR_USER_CHANGE_PASSWORD_RFC.
    ERROR 2008-11-28 18:23:07.359
    FRF-00025 Unable to call function. Error message: Syntax error in program /1BCDWBEN/SAPLSEN0005 . .
    INFO 2008-11-28 18:23:07.359
    RFC connection closed.
    ERROR 2008-11-28 18:23:07.359
    MUT-03025 Caught ERfcExcept in Modulecall: Syntax error in program /1BCDWBEN/SAPLSEN0005 ..
    ERROR 2008-11-28 18:23:07.359
    FCO-00011 The step changeDDIC000Password with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_CI_Instance_ABAP_Passwords|ind|ind|ind|ind|3|0|changeDDIC000Password was executed with status ERROR ( Last error reported by the step :Caught ERfcExcept in Modulecall: Syntax error in program /1BCDWBEN/SAPLSEN0005 ..).
    I'm pasting in dev_w0 below:
    Re
    Dennis
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL 1
    ACTIVE TRACE COMPONENTS all, MJ
    B
    B Fri Nov 28 18:12:01 2008
    B create_con (con_name=R/3)
    B Loading DB library 'D:\usr\sap\ISM\DVEBMGS00\exe\dbsdbslib.dll' ...
    B Library 'D:\usr\sap\ISM\DVEBMGS00\exe\dbsdbslib.dll' loaded
    B Version of 'D:\usr\sap\ISM\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.144)
    B New connection 0 created
    M sysno 00
    M sid ISM
    M systemid 562 (PC with Windows NT)
    M relno 7000
    M patchlevel 0
    M patchno 144
    M intno 20050900
    M make: multithreaded, Unicode, 64 bit, optimized
    M pid 3112
    M
    M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    M length of sys_adm_ext is 576 bytes
    M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3112) http://dpxxdisp.c 1305
    I MtxInit: 30000 0 0
    M DpSysAdmExtCreate: ABAP is active
    M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M DpShMCreate: sizeof(wp_adm) 25168 (1480)
    M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
    M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
    M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
    M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M DpShMCreate: sizeof(comm_adm) 552080 (1088)
    M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M DpShMCreate: sizeof(slock_adm) 0 (104)
    M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M DpShMCreate: sizeof(file_adm) 0 (72)
    M DpShMCreate: sizeof(vmc_adm) 0 (1864)
    M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
    M DpShMCreate: sizeof(gw_adm) 48
    M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
    M DpShMCreate: allocated sys_adm at 000000000EE70050
    M DpShMCreate: allocated wp_adm at 000000000EE72150
    M DpShMCreate: allocated tm_adm_list at 000000000EE783A0
    M DpShMCreate: allocated tm_adm at 000000000EE78400
    M DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
    M DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
    M DpShMCreate: allocated comm_adm at 000000000F3E3FA0
    M DpShMCreate: system runs without slock table
    M DpShMCreate: system runs without file table
    M DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
    M DpShMCreate: allocated gw_adm at 000000000F46ACB0
    M DpShMCreate: system runs without vmc_adm
    M DpShMCreate: allocated ca_info at 000000000F46ACE0
    M DpShMCreate: allocated wall_adm at 000000000F46ACF0
    M ThTaskStatus: rdisp/reset_online_during_debug 0
    X EmInit: MmSetImplementation( 2 ).
    X MM global diagnostic options set: 0
    X <ES> client 0 initializing ....
    X Using implementation view
    X <EsNT> Using memory model view.
    M <EsNT> Memory Reset disabled as NT default
    X ES initialized.
    M
    M Fri Nov 28 18:12:02 2008
    M ThInit: running on host ides001
    M
    M Fri Nov 28 18:12:03 2008
    M calling db_connect ...
    C
    C DBSDBSLIB : version 700.08, patch 0.144 (Make PL 0.144)
    C MAXDB shared library (dbsdbslib) patchlevels (last 10)
    C (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
    C (0.144) I5/OS ldappasswd support for 5250 terminal. (note 1129573)
    C (0.139) Return DS_SQLERR instead of DS_CONNECTERR (note 1121076)
    C (0.131) Do not trace password of SQLOPT into dev trace (note 1097930)
    C (0.130) Performance optimization for UPDSTAT PREPARE (note 1096387)
    C (0.125) Update statistic prepare on row level (note 1086430)
    C (0.104) Update statistic with empty schemas (note 1041547)
    C (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
    C (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
    C (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
    C
    C
    C Loading SQLDBC client runtime ...
    C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
    C SQLDBC Library Version : libSQLDBC 7.6.3 BUILD 009-123-163-622
    C SQLDBC client runtime is MaxDB 7.6.3.009 CL 163622
    C SQLDBC supports new DECIMAL interface : 0
    C SQLDBC supports VARIABLE INPUT data : 1
    C SQLDBC supports keepAlive indicator : 0
    C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
    C Try to connect (DEFAULT) on connection 0 ...
    C Attach to SAP DB : Kernel 7.6.03 Build 009-123-163-622
    C Database release is SAP DB 7.6.03.009
    C INFO : Database 'ISM' instance is running on 'ides001'
    C INFO : SAP DB Packet_Size = 131072
    C INFO : SAP DB Min_Reply_Size = 4096
    C INFO : SAP DB Comm_Size = 126976
    C INFO : DBSL buffer size = 126976
    C INFO : SAP DB MaxLocks = 300000
    C INFO : Connect to DB as 'SAPISM'
    C Command info enabled
    C Now I'm connected to SAP DB
    C 00: ides001-ISM, since=20081128181203, ABAP= <unknown> (0)
    B Connection 0 opened (DBSL handle 0)
    B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
    B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081128 181203 ides001
    C INFO : SAP RELEASE (DB) = 700
    M db_connect o.k.
    M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I
    I Fri Nov 28 18:12:47 2008
    I MtxInit: 0 0 0
    M SHM_PRES_BUF (addr: 0000000014070050, size: 4400000)
    M SHM_ROLL_AREA (addr: 000007FFDDA80050, size: 268435456)
    M SHM_PAGING_AREA (addr: 00000000144B0050, size: 134217728)
    M SHM_ROLL_ADM (addr: 000000001C4C0050, size: 2678942)
    M SHM_PAGING_ADM (addr: 000000000FF10050, size: 525344)
    M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 000000001C750050
    M ThCreateNoBuffer index size: 3000 elems
    M ThCreateVBAdm allocated 12176 bytes (50 server) at 000000000FFA0050
    X EmInit: MmSetImplementation( 2 ).
    X MM global diagnostic options set: 0
    X <ES> client 0 initializing ....
    X Using implementation view
    X ES initialized.
    B db_con_shm_ini: WP_ID = 0, WP_CNT = 17, CON_ID = -1
    B dbtbxbuf: Buffer TABL (addr: 00000000207B0160, size: 30000000, end: 000000002244C4E0)
    B dbtbxbuf: Buffer TABLP (addr: 0000000022450160, size: 10240000, end: 0000000022E14160)
    B dbexpbuf: Buffer EIBUF (addr: 0000000022E20170, size: 4194304, end: 0000000023220170)
    B dbexpbuf: Buffer ESM (addr: 0000000023230170, size: 4194304, end: 0000000023630170)
    B dbexpbuf: Buffer CUA (addr: 0000000023640170, size: 3072000, end: 000000002392E170)
    B dbexpbuf: Buffer OTR (addr: 0000000023930170, size: 4194304, end: 0000000023D30170)
    M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S *** init spool environment
    S initialize debug system
    T Stack direction is downwards.
    T debug control: prepare exclude for printer trace
    T new memory block 000000000FC9D040
    S spool kernel/ddic check: Ok
    S using table TSP02FX for frontend printing
    S 1 spool work process(es) found
    S frontend print via spool service enabled
    S printer list size is 150
    S printer type list size is 50
    S queue size (profile) = 300
    S hostspool list size = 3000
    S option list size is 30
    S found processing queue enabled
    S found spool memory service RSPO-RCLOCKS at 000000002D0500D0
    S doing lock recovery
    S setting server cache root
    S found spool memory service RSPO-SERVERCACHE at 000000002D050610
    S using messages for server info
    S size of spec char cache entry: 297032 bytes (timeout 100 sec)
    S size of open spool request entry: 2272 bytes
    S immediate print option for implicitely closed spool requests is disabled
    A
    A Fri Nov 28 18:12:48 2008
    A
    A -PXA--
    A PXA INITIALIZATION
    A PXA: Locked PXA-Semaphore.
    A System page size: 4kb, total admin_size: 11460kb, dir_size: 11392kb.
    A Attached to PXA (address 000007FFEDAB0050, size 300000K)
    A abap/pxa = shared protect gen_remote
    A PXA INITIALIZATION FINISHED
    A -PXA--
    A
    A ABAP ShmAdm attached (addr=000007FF35EEE000 leng=20955136 end=000007FF372EA000)
    A >> Shm MMADM area (addr=000007FF363C7F10 leng=244096 end=000007FF36403890)
    A >> Shm MMDAT area (addr=000007FF36404000 leng=15622144 end=000007FF372EA000)
    A RFC Destination> destination ides001_ISM_00 host ides001 system ISM systnr 0 (ides001_ISM_00)
    A RFC Options> H=ides001,S=00,d=2,
    B table logging switched off for all clients
    A RFC FRFC> fallback activ but this is not a central instance.
    A
    A RFC rfc/signon_error_log = -1
    A RFC rfc/dump_connection_info = 0
    A RFC rfc/dump_client_info = 0
    A RFC rfc/cp_convert/ignore_error = 1
    A RFC rfc/cp_convert/conversion_char = 23
    A RFC rfc/wan_compress/threshold = 251
    A RFC rfc/recorder_pcs not set, use defaule value: 2
    A RFC rfc/delta_trc_level not set, use default value: 0
    A RFC rfc/no_uuid_check not set, use default value: 0
    A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A RFC Method> initialize RemObjDriver for ABAP Objects
    M ThrCreateShObjects allocated 35354 bytes at 000000000FFC0050
    N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\ISM\DVEBMGS00\sec): ok
    N
    N =================================================
    N === SSF INITIALIZATION:
    N ===...SSF Security Toolkit name SAPSECULIB .
    N ===...SSF trace level is 0 .
    N ===...SSF library is D:\usr\sap\ISM\DVEBMGS00\exe\sapsecu.dll .
    N ===...SSF hash algorithm is SHA1 .
    N ===...SSF symmetric encryption algorithm is DES-CBC .
    N ===...completed with return code 5.
    N =================================================
    N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M JrfcVmcRegisterNativesDriver o.k.
    W =================================================
    W === ipl_Init() called
    B dbtran INFO (init_connection '<DEFAULT>' ADABAS D:700.08):
    B max_blocking_factor = 10, max_in_blocking_factor = 127,
    B min_blocking_factor = 10, min_in_blocking_factor = 127,
    B prefer_union_all = 1, prefer_join = 0,
    B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
    B convert AVG = 0, alias table FUPD = 0,
    B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
    B select * =0x0f, character encoding = STD / <none>:-,
    B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
    B rule_fae->0, concat_fae->0, concat_fae_or->0
    W
    W Fri Nov 28 18:12:49 2008
    W ITS Plugin: Path dw_gui
    W ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W ITS Plugin: sizeof(SAP_UC) 2
    W ITS Plugin: Release: 700, http://7000.0.144.20050900
    W ITS Plugin: Int.version, 33
    W ITS Plugin: Feature set: 16
    W ===... Calling itsp_Init in external dll ===>
    W === ipl_Init() returns 0, ITSPE_OK: OK
    W =================================================
    N VSI: WP init in ABAP VM completed with rc=0
    E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume ides001_ISM_00
    E Replication is disabled
    E EnqCcInitialize: local lock table initialization o.k.
    E EnqId_SuppressIpc: local EnqId initialization o.k.
    E EnqCcInitialize: local enqueue client init o.k.
    A
    A Fri Nov 28 18:12:52 2008
    A GENER request remote generation: SAPMSSY2.
    A
    A Fri Nov 28 18:13:03 2008
    A GENER request remote generation: SAPLSTUP.
    A
    A Fri Nov 28 18:13:08 2008
    A GENER request remote generation: SAPLCNDP.
    A
    A Fri Nov 28 18:13:11 2008
    A GENER request remote generation: SAPLSCNT.
    A
    A Fri Nov 28 18:13:12 2008
    A GENER request remote generation: SAPSHDTV.
    A GENER request remote generation: SAPFGUICNTL.
    A
    A Fri Nov 28 18:13:13 2008
    A GENER request remote generation: SAPLOLEA.
    A
    A Fri Nov 28 18:13:14 2008
    A GENER request remote generation: SAPLSGUI.
    A
    A Fri Nov 28 18:13:15 2008
    A GENER request remote generation: SAPLSTTM.
    A GENER request remote generation: SAPLSBDC.
    A
    A Fri Nov 28 18:13:17 2008
    A GENER request remote generation: SAPLSFES.
    A
    A Fri Nov 28 18:13:18 2008
    A GENER request remote generation: SAPLURFC.
    A GENER request remote generation: SAPLSPLUGIN.
    A
    A Fri Nov 28 18:13:20 2008
    A GENER request remote generation: SAPLSMPI.
    A
    A Fri Nov 28 18:13:43 2008
    A GENER starting remote generation: SAPLSDNT (requested by W9).
    A GENER got lock for program SAPLSDNT.
    A
    A Fri Nov 28 18:13:45 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSUGS (requested by W9).
    A GENER got lock for program SAPLSUGS.
    A
    A Fri Nov 28 18:13:46 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSDTB (requested by W9).
    A GENER got lock for program SAPLSDTB.
    A
    A Fri Nov 28 18:13:48 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSDSG (requested by W9).
    A GENER got lock for program SAPLSDSG.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RADBTDDO (requested by W9).
    A GENER got lock for program RADBTDDO.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RADBTDDF (requested by W9).
    A GENER got lock for program RADBTDDF.
    A
    A Fri Nov 28 18:13:49 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSALI (requested by W2).
    A GENER got lock for program SAPLSALI.
    A
    A Fri Nov 28 18:13:50 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSALC (requested by W2).
    A GENER got lock for program SAPLSALC.
    A
    A Fri Nov 28 18:13:54 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSCSMROUTE (requested by W2).
    A GENER got lock for program SAPLSCSMROUTE.
    A
    A Fri Nov 28 18:13:55 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSALS (requested by W2).
    A GENER got lock for program SAPLSALS.
    A
    A Fri Nov 28 18:13:56 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSCSM_UTILITIES (requested by W2).
    A GENER got lock for program SAPLSCSM_UTILITIES.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLMSGSERVER (requested by W2).
    A GENER got lock for program SAPLMSGSERVER.
    A
    A Fri Nov 28 18:13:57 2008
    A GENER Performing COMMIT.
    A
    A Fri Nov 28 18:13:58 2008
    A GENER starting remote generation: SAPMSSY8 (requested by W2).
    A GENER got lock for program SAPMSSY8.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSBTCRTE (requested by W12).
    A GENER got lock for program RSBTCRTE.
    A
    A Fri Nov 28 18:13:59 2008
    A GENER Performing COMMIT.
    A
    A Fri Nov 28 18:14:01 2008
    A GENER starting remote generation: SAPLSALU (requested by W2).
    A GENER got lock for program SAPLSALU.
    A
    A Fri Nov 28 18:14:06 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSPOC (requested by W12).
    A GENER got lock for program SAPLSPOC.
    A GENER Performing COMMIT.
    A
    A Fri Nov 28 18:14:07 2008
    A GENER starting remote generation: SAPDBD$S (requested by W12).
    A GENER got lock for program SAPDBD$S.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSABE (requested by W12).
    A GENER got lock for program SAPLSABE.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSAMON40 (requested by W12).
    A GENER got lock for program RSAMON40.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPMS07A (requested by W12).
    A GENER got lock for program SAPMS07A.
    A
    A Fri Nov 28 18:14:08 2008
    A GENER Performing COMMIT.
    A GENER request remote generation: SAPLSTUN.
    M
    M Fri Nov 28 18:14:09 2008
    M SecAudit(RsauShmInit): WP attached to existing shared memory.
    M SecAudit(RsauShmInit): addr of SCSA........... = 000000000A9B0050
    M SecAudit(RsauShmInit): addr of RSAUSHM........ = 000000000A9B07C0
    M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 000000000A9B0800
    M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 000000000A9B080C
    A
    A Fri Nov 28 18:14:10 2008
    A GENER starting remote generation: CL_SBTI_CRITERIA_TYPE=========CP (requested by W5).
    A GENER got lock for program CL_SBTI_CRITERIA_TYPE=========CP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: IF_SBTI_CRITERIA_TYPE=========IP (requested by W5).
    A GENER got lock for program IF_SBTI_CRITERIA_TYPE=========IP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: CX_SBTI_CRITTYPE_EX===========CP (requested by W5).
    A GENER got lock for program CX_SBTI_CRITTYPE_EX===========CP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: CX_SBTI_EXCEPTION=============CP (requested by W5).
    A GENER got lock for program CX_SBTI_EXCEPTION=============CP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: IF_T100_MESSAGE===============IP (requested by W5).
    A GENER got lock for program IF_T100_MESSAGE===============IP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: CL_MESSAGE_HELPER=============CP (requested by W5).
    A GENER got lock for program CL_MESSAGE_HELPER=============CP.
    A
    A Fri Nov 28 18:14:11 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: CX_SY_MESSAGE_ILLEGAL_TEXT====CP (requested by W5).
    A GENER got lock for program CX_SY_MESSAGE_ILLEGAL_TEXT====CP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: CX_DYNAMIC_CHECK==============CP (requested by W5).
    A GENER got lock for program CX_DYNAMIC_CHECK==============CP.
    A GENER Performing COMMIT.
    A
    A Fri Nov 28 18:14:13 2008
    A GENER starting remote generation: SAPLSEU_COMPONENT (requested by W12).
    A GENER got lock for program SAPLSEU_COMPONENT.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSF09 (requested by W12).
    A GENER got lock for program SAPLSF09.
    A
    A Fri Nov 28 18:14:16 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSF06 (requested by W12).
    A GENER got lock for program SAPLSF06.
    A
    A Fri Nov 28 18:14:18 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSF05 (requested by W12).
    A GENER got lock for program SAPLSF05.
    A
    A Fri Nov 28 18:14:20 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSHI1 (requested by W12).
    A GENER got lock for program SAPLSHI1.
    A
    A Fri Nov 28 18:14:21 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSEUF (requested by W12).
    A GENER got lock for program SAPLSEUF.
    A
    A Fri Nov 28 18:14:23 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSHI2 (requested by W12).
    A GENER got lock for program SAPLSHI2.
    A
    A Fri Nov 28 18:14:24 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSHI5 (requested by W12).
    A GENER got lock for program SAPLSHI5.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSHI3 (requested by W12).
    A GENER got lock for program SAPLSHI3.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSFTX (requested by W12).
    A GENER got lock for program SAPLSFTX.
    A
    A Fri Nov 28 18:14:26 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSHI9 (requested by W12).
    A GENER got lock for program SAPLSHI9.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSHI6 (requested by W12).
    A GENER got lock for program SAPLSHI6.
    A
    A Fri Nov 28 18:14:28 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSHI20 (requested by W12).
    A GENER got lock for program SAPLSHI20.
    A
    A Fri Nov 28 18:14:29 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: CONTEXT_X_TR_SYS_PARAMS (requested by W12).
    A GENER got lock for program CONTEXT_X_TR_SYS_PARAMS.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSCTS_SYSTEM_CONTEXT (requested by W12).
    A GENER got lock for program SAPLSCTS_SYSTEM_CONTEXT.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSTRD (requested by W12).
    A GENER got lock for program SAPLSTRD.
    A
    A Fri Nov 28 18:14:34 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSCP3 (requested by W12).
    A GENER got lock for program SAPLSCP3.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSCTS_UNICODE (requested by W12).
    A GENER got lock for program SAPLSCTS_UNICODE.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSTMG (requested by W12).
    A GENER got lock for program SAPLSTMG.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSTR4 (requested by W12).
    A GENER got lock for program SAPLSTR4.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSG01 (requested by W12).
    A GENER got lock for program SAPLSG01.
    A
    A Fri Nov 28 18:14:35 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSHI12 (requested by W12).
    A GENER got lock for program SAPLSHI12.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSHI10 (requested by W12).
    A GENER got lock for program SAPLSHI10.
    A
    A Fri Nov 28 18:14:36 2008
    A GENER Performing COMMIT.
    A
    A Fri Nov 28 18:14:37 2008
    A GENER starting remote generation: SAPLSHI25 (requested by W12).
    A GENER got lock for program SAPLSHI25.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSF28 (requested by W12).
    A GENER got lock for program SAPLSF28.
    A
    A Fri Nov 28 18:14:38 2008
    A GENER Performing COMMIT.
    A
    A Fri Nov 28 18:14:39 2008
    A GENER starting remote generation: SAPLSFW_COMMON (requested by W12).
    A GENER got lock for program SAPLSFW_COMMON.
    A
    A Fri Nov 28 18:14:40 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: CL_ABAP_SWITCH================CP (requested by W12).
    A GENER got lock for program CL_ABAP_SWITCH================CP.
    A GENER Performing COMMIT.
    A
    A Fri Nov 28 18:14:43 2008
    A GENER starting remote generation: SAPLSF07 (requested by W12).
    A GENER got lock for program SAPLSF07.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSEUT (requested by W12).
    A GENER got lock for program SAPLSEUT.
    A
    A Fri Nov 28 18:14:44 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: %_CSTREE (requested by W12).
    A GENER got lock for program %_CSTREE.
    A GENER Performing COMMIT.
    A
    A Fri Nov 28 18:14:45 2008
    A GENER starting remote generation: RSDBPREV (requested by W12).
    A GENER got lock for program RSDBPREV.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSDB6HIS (requested by W12).
    A GENER got lock for program SAPLSDB6HIS.
    A
    A Fri Nov 28 18:15:19 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: CL_DB6_RC=====================CP (requested by W12).
    A GENER got lock for program CL_DB6_RC=====================CP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: CL_DBA_CONFIG=================CP (requested by W12).
    A GENER got lock for program CL_DBA_CONFIG=================CP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: CL_DB6_CONFIG=================CP (requested by W12).
    A GENER got lock for program CL_DB6_CONFIG=================CP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSVAR_API (requested by W12).
    A GENER got lock for program SAPLSVAR_API.
    A GENER Performing COMMIT.
    A
    A Fri Nov 28 18:15:20 2008
    A GENER starting remote generation: RSDB6COLL (requested by W12).
    A GENER got lock for program RSDB6COLL.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSDBSPJS (requested by W12).
    A GENER got lock for program RSDBSPJS.
    A
    A Fri Nov 28 18:15:21 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: CL_ABAP_LIST_UTILITIES========CP (requested by W12).
    A GENER got lock for program CL_ABAP_LIST_UTILITIES========CP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSUSM (requested by W12).
    A GENER got lock for program SAPLSUSM.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSYGU (requested by W12).
    A GENER got lock for program SAPLSYGU.
    A GENER Performing COMMIT.
    A GENER starting remote generation: /1BCDWBEN/SAPLSENQ12 (requested by W12).
    A GENER got lock for program /1BCDWBEN/SAPLSENQ12.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSDBA_TCOLL (requested by W12).
    A GENER got lock for program SAPLSDBA_TCOLL.
    A
    A Fri Nov 28 18:15:24 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSDB6XDB (requested by W12).
    A GENER got lock for program SAPLSDB6XDB.
    A
    A Fri Nov 28 18:15:26 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: CL_DB6_BACKEND================CP (requested by W12).
    A GENER got lock for program CL_DB6_BACKEND================CP.
    A
    A Fri Nov 28 18:15:27 2008
    A GENER Performing COMMIT.
    A
    A Fri Nov 28 18:15:28 2008
    A GENER starting remote generation: CL_DB6_SYS====================CP (requested by W12).
    A GENER got lock for program CL_DB6_SYS====================CP.
    A
    A Fri Nov 28 18:15:29 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: CL_SQL_METADATA===============CP (requested by W12).
    A GENER got lock for program CL_SQL_METADATA===============CP.
    A
    A Fri Nov 28 18:15:30 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSDBSPDS (requested by W13).
    A GENER got lock for program RSDBSPDS.
    A GENER Performing COMMIT.
    A
    A Fri Nov 28 18:15:31 2008
    A GENER starting remote generation: CL_DBA_DBCON==================CP (requested by W13).
    A GENER got lock for program CL_DBA_DBCON==================CP.
    A GENER was already generated: CL_DBA_DBCON==================CP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: CL_DB6_CON====================CP (requested by W12).
    A GENER got lock for program CL_DB6_CON====================CP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: CL_DB6_DBCON==================CP (requested by W12).
    A GENER got lock for program CL_DB6_DBCON==================CP.
    A
    A Fri Nov 28 18:15:32 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: CX_DB6_CON====================CP (requested by W12).
    A GENER got lock for program CX_DB6_CON====================CP.
    A
    A Fri Nov 28 18:15:33 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: CX_DB6_ROOT===================CP (requested by W12).
    A GENER got lock for program CX_DB6_ROOT===================CP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: CX_DBA_ROOT===================CP (requested by W12).
    A GENER got lock for program CX_DBA_ROOT===================CP.
    A
    A Fri Nov 28 18:15:34 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: CX_DB6_SYS====================CP (requested by W12).
    A GENER got lock for program CX_DB6_SYS====================CP.
    A
    A Fri Nov 28 18:15:35 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSDB6IMAGE (requested by W12).
    A GENER got lock for program RSDB6IMAGE.
    A GENER Performing COMMIT.
    A
    A Fri Nov 28 18:15:36 2008
    A GENER starting remote generation: CL_DB6_TREE_NAVIGATOR=========CP (requested by W12).
    A GENER got lock for program CL_DB6_TREE_NAVIGATOR=========CP.
    A
    A Fri Nov 28 18:15:38 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: CL_DB6_EVENT_RECEIVER_BASE====CP (requested by W12).
    A GENER got lock for program CL_DB6_EVENT_RECEIVER_BASE====CP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSDB_HRLY (requested by W12).
    A GENER got lock for program RSDB_HRLY.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSDB2_RUN_HOURLY_REMOTE (requested by W12).
    A GENER got lock for program RSDB2_RUN_HOURLY_REMOTE.
    A
    A Fri Nov 28 18:15:39 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSTU3_ADMIN (requested by W12).
    A GENER got lock for program SAPLSTU3_ADMIN.
    A
    A Fri Nov 28 18:15:42 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: CL_DB2_CONNECTION_POOL========CP (requested by W12).
    A GENER got lock for program CL_DB2_CONNECTION_POOL========CP.
    A
    A Fri Nov 28 18:15:43 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLS390 (requested by W12).
    A GENER got lock for program SAPLS390.
    A
    A Fri Nov 28 18:15:46 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSTU3 (requested by W12).
    A GENER got lock for program SAPLSTU3.
    A
    A Fri Nov 28 18:15:51 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLDBSYCHK_DB2 (requested by W12).
    A GENER got lock for program SAPLDBSYCHK_DB2.
    A
    A Fri Nov 28 18:15:52 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSDBI_DBINFO (requested by W12).
    A GENER got lock for program SAPLSDBI_DBINFO.
    A
    A Fri Nov 28 18:15:53 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSHOSTDB (requested by W12).
    A GENER got lock for program RSHOSTDB.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSHOST1M (requested by W12).
    A GENER got lock for program RSHOST1M.
    A
    A Fri Nov 28 18:15:54 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSTUJ (requested by W12).
    A GENER got lock for program SAPLSTUJ.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSMON (requested by W12).
    A GENER got lock for program SAPLSMON.
    A
    A Fri Nov 28 18:15:55 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSHOST2M (requested by W12).
    A GENER got lock for program RSHOST2M.
    A
    A Fri Nov 28 18:15:56 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSHOSTDC (requested by W12).
    A GENER got lock for program RSHOSTDC.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSHOST3M (requested by W12).
    A GENER got lock for program RSHOST3M.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSHOST4M (requested by W12).
    A GENER got lock for program RSHOST4M.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSICFDLT (requested by W12).
    A GENER got lock for program RSICFDLT.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLHTTPTREE (requested by W12).
    A GENER got lock for program SAPLHTTPTREE.
    A
    A Fri Nov 28 18:15:57 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLTHFB2 (requested by W12).
    A GENER got lock for program SAPLTHFB2.
    A
    A Fri Nov 28 18:15:58 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSICFRECORDER (requested by W12).
    A GENER got lock for program SAPLSICFRECORDER.
    A GENER Performing COMMIT.
    A
    A Fri Nov 28 18:15:59 2008
    A GENER starting remote generation: CL_ABAP_TSTMP=================CP (requested by W12).
    A GENER got lock for program CL_ABAP_TSTMP=================CP.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSICFDMN (requested by W12).
    A GENER got lock for program RSICFDMN.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSICFJOB (requested by W12).
    A GENER got lock for program RSICFJOB.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSORACOL (requested by W12).
    A GENER got lock for program RSORACOL.
    A
    A Fri Nov 28 18:16:00 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSORAVSH (requested by W12).
    A GENER got lock for program RSORAVSH.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSRFCDMN (requested by W12).
    A GENER got lock for program RSRFCDMN.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLRFCA (requested by W12).
    A GENER got lock for program SAPLRFCA.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSSTAT61 (requested by W12).
    A GENER got lock for program RSSTAT61.
    A GENER Performing COMMIT.
    A GENER starting remote generation: CL_SWNC_LOG===================CP (requested by W12).
    A GENER got lock for program CL_SWNC_LOG===================CP.
    A
    A Fri Nov 28 18:16:01 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSBAL (requested by W12).
    A GENER got lock for program SAPLSBAL.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSBAL_SERVICE (requested by W12).
    A GENER got lock for program SAPLSBAL_SERVICE.
    A
    A Fri Nov 28 18:16:02 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSTUW (requested by W12).
    A GENER got lock for program SAPLSTUW.
    A
    A Fri Nov 28 18:16:04 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLRHFE (requested by W12).
    A GENER got lock for program SAPLRHFE.
    A GENER Performing COMMIT.
    A GENER starting remote generation: /SDF/SAPLSMD_E2E_TRACE (requested by W12).
    A GENER got lock for program /SDF/SAPLSMD_E2E_TRACE.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSETRM (requested by W12).
    A GENER got lock for program SAPLSETRM.
    A
    A Fri Nov 28 18:16:05 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: /1BCDWBEN/SAPLSEN0004 (requested by W12).
    A GENER got lock for program /1BCDWBEN/SAPLSEN0004.
    A
    A Fri Nov 28 18:16:06 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSAPWL_PARM (requested by W12).
    A GENER got lock for program SAPLSAPWL_PARM.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSBAL_DB (requested by W12).
    A GENER got lock for program SAPLSBAL_DB.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSBAL_TOOLBOX (requested by W12).
    A GENER got lock for program SAPLSBAL_TOOLBOX.
    A GENER Performing COMMIT.
    A GENER starting remote generation: SAPLSBAL_DB_INTERNAL (requested by W12).
    A GENER got lock for program SAPLSBAL_DB_INTERNAL.
    A
    A Fri Nov 28 18:16:07 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSSTATPH (requested by W12).
    A GENER got lock for program RSSTATPH.
    A GENER Performing COMMIT.
    A GENER starting remote generation: RSORA110 (requested by W12).
    A GENER got lock for program RSORA110.
    A
    A Fri Nov 28 18:16:09 2008
    A GENER Performing COMMIT.
    A GENER starting remote generation: SWNCCOLL (requested by W12).
    A GENER got lock for program SWNCCOLL.
    A GENER Performing COMMIT.
    A
    A Fri Nov 28 18:16:10 2008
    A GENER starting remote generation: SAPLLRFC (requested by W12).
    A GENER got lock for program SAPLLRFC.
    A GENER Performing COMMIT.
    A GENER request remote generation: SAPLSCSM_COLLECTOR.
    A
    A Fri Nov 28 18:16:11 2008
    A GENER request remote generation: CL_SWNC_COLLECTOR=============CP.
    A GENER request remote generation: CL_SWNC_COLLECTOR_RUNTIME=====CP.
    A
    A Fri Nov 28 18:16:12 2008
    A GENER request remote generation: SAPLTIMEEXT.
    A GENER request remote generation: CL_SWNC_READER_WLOAD==========CP.
    A GENER request remote generation: CL_SWNC_INDEX_CONTROL_INTERVALCP.
    A
    A Fri Nov 28 18:16:13 2008
    A GENER request remote generation: CL_SWNC_INDEX_CONTROL=========CP.
    A GENER request remote generation: CL_SWNC_PERFORMANCE_CONTROL===CP.
    A GENER request remote generation: CL_SWNC_PERFORMANCE_INDICATOR=CP.
    A GENER request remote generation: CL_SWNC_MESSAGE_CONTROL=======CP.
    A GENER request remote generation: CL_SWNC_CONTROL_LOG===========CP.
    A GENER request remote generation: CL_SWNC_CONTROL_MONITORING====CP.
    A GENER request remote generation: IF_EX_WORKLOAD_STATISTIC======IP.
    A GENER request remote generation: CL_EX_WORKLOAD_STATISTIC======CP.
    A GENER request remote generation: IF_SWNC_MESSAGE_LISTENER======IP.
    A GENER request remote generation: /1BCDWBEN/SAPLSEN0014.
    A
    A Fri Nov 28 18:16:14 2008
    A GENER request remote generation: CL_SWNC_COLLECTOR_FACTORY=====CP.
    A
    A Fri Nov 28 18:16:15 2008
    A GENER request remote generation: CL_SWNC_COLLECTOR_INFO========CP.
    A GENER request remote generation: CL_SWNC_COLLECTOR_DB==========CP.
    A GENER request remote generation: CL_SWNC_AGG_BUFFER_STAT=======CP.
    A GENER request remote generation: CL_SWNC_TOTAL_COLLECTOR=======CP.
    A GENER request remote generation: CL_SWNC_AGG_COLLEAGUE=========CP.
    A GENER request remote generation: CL_SWNC_AGG_ASTAT=============CP.
    A GENER request remote generation: CL_SWNC_AGG_AS_HITLIST_DBCNT==CP.
    A
    A Fri Nov 28 18:16:16 2008
    A GENER request remote generation: CL_SWNC_AGG_AS_HITLIST========CP.
    A GENER request remote generation: CL_SWNC_AGG_AS_HITLIST_RESPTI=CP.
    A GENER request remote generation: CL_SWNC_AGG_COMPHIER==========CP.
    A GENER request remote generation: CL_SWNC_AGG_ORGUNIT===========CP.
    A GENER request remote generation: CL_SWNC_AGG_WEB_CLIENT========CP.
    A GENER request remote generation: CL_SWNC_AGG_WEB===============CP.
    A GENER request remote generation: CL_SWNC_AGG_WEB_CLIENT_DEST===CP.
    A GENER request remote generation: CL_SWNC_AGG_WEB_DEST==========CP.
    A GENER request remote generation: CL_SWNC_AGG_WEB_SERVER========CP.
    A GENER request remote generation: CL_SWNC_AGG_WEB_SERVER_DEST===CP.
    A GENER request remote generation: CL_SWNC_AGG_VMC===============CP.
    A GENER request remote generation: CL_SWNC_AGG_TASK_TYPE=========CP.
    A GENER request remote generation: CL_SWNC_AGG_TASKTIMES=========CP.
    A GENER request remote generation: CL_SWNC_AGG_TIMES=============CP.
    A
    A Fri Nov 28 18:16:17 2008
    A GENER request remote generation: CL_SWNC_AGG_DBPROCS===========CP.
    A GENER request remote generation: CL_SWNC_AGG_EXTSYSTEM=========CP.
    A GENER request remote generation: CL_SWNC_AGG_TCDET=============CP.
    A GENER request remote generation: CL_SWNC_AGG_FRONTEND==========CP.
    A GENER request remote generation: CL_SWNC_AGG_MEMORY============CP.
    A GENER request remote generation: CL_SWNC_AGG_SPOOLACT==========CP.
    A GENER request remote generation: CL_SWNC_AGG_TABLEREC==========CP.
    A GENER request remote generation: CL_SWNC_AGG_USERTCODE=========CP.
    A GENER request remote generation: CL_SWNC_AGG_USERWORKLOAD======CP.
    A GENER request remote generation: CL_SWNC_AGG_RFCCLIENT=========CP.
    A GENER request remote generation: CL_SWNC_AGG_RFCCLIENT_DEST====CP.
    A GENER request remote generation: CL_SWNC_AGG_RFCSERVER=========CP.
    A GENER request remote generation: CL_SWNC_AGG_RFCSERVER_DEST====CP.
    A
    A Fri Nov 28 18:16:18 2008
    A GENER request remote generation: CL_SWNC_AGG_HITLIST_DBCNT=====CP.
    A GENER request remote generation: CL_SWNC_AGG_HITLIST===========CP.
    A GENER request remote generation: CL_SWNC_AGG_HITLIST_RESPTIME==CP.
    A GENER request remote generation: CL_SWNC_AGG_SPOOL=============CP.
    A GENER request remote generation: CL_SWNC_AGG_DBCON=============CP.
    A GENER request remote generation: SAPLASTAT_TRIG.
    A GENER request remote generation: CL_SWNC_FILTER_MAXTIME========CP.
    A GENER request remote generation: CL_SWNC_FILTER================CP.
    A GENER request remote generation: CL_SWNC_STATREC_SET_AGG=======CP.
    A GENER request remote generation: CL_SWNC_STATREC_SET===========CP.
    A GENER request remote generation: CL_SWNC_CONSTANTS=============CP.
    A GENER request remote generation: SAPLPFFB.
    A
    A Fri Nov 28 18:16:19 2008
    A GENER request remote generation: CL_SWNC_RECORD_WLOAD==========CP.
    A GENER request remote generation: CL_SWNC_RECORD================CP.
    A GENER request remote generation: CL_SWNC_PF_MAINREC_ADAPTER====CP.
    A GENER request remote generation: CL_SWNC_PF_DB_ADAPTER=========CP.
    A GENER request remote generation: CX_SWNC_NOT_IN_INTERVAL=======CP.
    A GENER request remote generation: CX_SWNC_NO_MORE_INTERVALS=====CP.
    A GENER request remote generation: CL_SWNC_READER_ASTAT==========CP.
    A GENER request remote generation: CX_SWNC_EOF===================CP.
    A
    A Fri Nov 28 18:17:00 2008
    A GENER request remote generation: SAPLSADH.
    A GENER request remote generation: SAPLSDBI_DBCON.
    A
    A Fri Nov 28 18:17:01 2008
    A GENER request remote generation: RSSDBREG.
    A
    A Fri Nov 28 18:17:02 2008
    A GENER request remote generation: SAPLCRFC.
    A
    A Fri Nov 28 18:17:03 2008
    A GENER request remote generation: /1BCDWBEN/SAPLSEN0001.
    A
    A Fri Nov 28 18:17:04 2008
    A GENER request remote generation: SAPLSPFL.
    A
    A Fri Nov 28 18:17:05 2008
    A GENER request remote generation: %_CPFLTY.
    A GENER request remote generation: SAPLSYUT.
    A GENER request remote generation: SAPLSECSTORE.
    A
    A Fri Nov 28 18:17:07 2008
    A GENER request remote generation: RADDOCHL.
    A
    A Fri Nov 28 18:17:09 2008
    A GENER request remote generation: SAPLSUSO.
    A GENER request remote generation: /1BCDWBEN/SAPLSEN0005.
    A *** ERROR => Syntax error in program /1BCDWBEN/SAPLSEN0005 http://abgen.c 1517
    A *** ERROR => > Include /1BCDWBEN/LSEN0005$56 line 7 http://abgen.c 1519
    A *** ERROR => > Unable to interpret "PMPORTING". Possible causes of error: Incorrect spelling or http://abgen.c 1521
    A *** ERROR => > comma error. http://abgen.c 1523
    A TH VERBOSE LEVEL FULL
    A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A ** RABAX: level LEV_RX_ROLLBACK entered.
    A ** RABAX: level LEV_RX_ROLLBACK completed.
    A ** RABAX: level LEV_RX_DB_ALIVE entered.
    A ** RABAX: level LEV_RX_DB_ALIVE completed.
    A ** RABAX: level LEV_RX_HOOKS entered.
    A ** RABAX: level LEV_RX_HOOKS completed.
    A ** RABAX: level LEV_RX_STANDARD entered.
    A ** RABAX: level LEV_RX_STANDARD completed.
    A ** RABAX: level LEV_RX_STOR_VALUES entered.
    A ** RABAX: level LEV_RX_STOR_VALUES completed.
    A ** RABAX: level LEV_RX_C_STACK entered.
    A
    A Fri Nov 28 18:17:10 2008
    A ** RABAX: level LEV_RX_C_STACK completed.
    A ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A ** RABAX: level LEV_RX_INTERFACES entered.
    A ** RABAX: level LEV_RX_INTERFACES completed.
    A ** RABAX: level LEV_RX_GET_MESS entered.
    A ** RABAX: level LEV_RX_GET_MESS completed.
    A ** RABAX: level LEV_RX_INIT_SNAP entered.
    A ** RABAX: level LEV_RX_INIT_SNAP completed.
    A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A ** RABAX: level LEV_SN_END completed.
    A ** RABAX: level LEV_RX_SET_ALERT entered.
    A ** RABAX: level LEV_RX_SET_ALERT completed.
    A ** RABAX: level LEV_RX_COMMIT entered.
    A ** RABAX: level LEV_RX_COMMIT completed.
    A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A ** RABAX: level LEV_RX_RESET_PROGS entered.
    A ** RABAX: level LEV_RX_RESET_PROGS completed.
    A ** RABAX: level LEV_RX_STDERR entered.
    A Fri Nov 28 18:17:10 2008
    A
    A ABAP Program SAPLSUSO .
    A Source LSUSOU02 Line 169.
    A Error Code SYNTAX_ERROR.
    A Module $Id: //bas/700_REL/src/krn/runt/abgen.c#10 $ SAP.
    A Function ab_genprog Line 1551.
    A ** RABAX: level LEV_RX_STDERR completed.
    A ** RABAX: level LEV_RX_RFC_ERROR entered.
    A ** RABAX: level LEV_RX_RFC_ERROR completed.
    A ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A ** RABAX: level LEV_RX_IMC_ERROR entered.
    A ** RABAX: level LEV_RX_IMC_ERROR completed.
    A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A ** RABAX: level LEV_RX_END entered.
    A ** RABAX: level LEV_RX_END completed.
    A ** RABAX: end RX_RFC
    A
    A Fri Nov 28 18:17:21 2008
    A GENER request remote generation: SAPLSALR.
    A GENER request remote generation: %_CCCMSM.
    A GENER request remote generation: /1BCDWBEN/SAPLSEN0005.
    A
    A Fri Nov 28 18:17:22 2008
    A *** ERROR => Syntax error in program /1BCDWBEN/SAPLSEN0005 http://abgen.c 1517
    A *** ERROR => > Include /1BCDWBEN/LSEN0005$56 line 7 http://abgen.c 1519
    A *** ERROR => > Unable to interpret "PMPORTING". Possible causes of error: Incorrect spelling or http://abgen.c 1521
    A *** ERROR => > comma error. http://abgen.c 1523
    A TH VERBOSE LEVEL FULL
    A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A ** RABAX: level LEV_RX_ROLLBACK entered.
    A ** RABAX: level LEV_RX_ROLLBACK completed.
    A ** RABAX: level LEV_RX_DB_ALIVE entered.
    A ** RABAX: level LEV_RX_DB_ALIVE completed.
    A ** RABAX: level LEV_RX_HOOKS entered.
    A ** RABAX: level LEV_RX_HOOKS completed.
    A ** RABAX: level LEV_RX_STANDARD entered.
    A ** RABAX: level LEV_RX_STANDARD completed.
    A ** RABAX: level LEV_RX_STOR_VALUES entered.
    A ** RABAX: level LEV_RX_STOR_VALUES completed.
    A ** RABAX: level LEV_RX_C_STACK entered.
    A ** RABAX: level LEV_RX_C_STACK completed.
    A ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A ** RABAX: level LEV_RX_INTERFACES entered.
    A ** RABAX: level LEV_RX_INTERFACES completed.
    A ** RABAX: level LEV_RX_GET_MESS entered.
    A ** RABAX: level LEV_RX_GET_MESS completed.
    A ** RABAX: level LEV_RX_INIT_SNAP entered.
    A ** RABAX: level LEV_RX_INIT_SNAP completed.
    A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A ** RABAX: level LEV_SN_END completed.
    A ** RABAX: level LEV_RX_SET_ALERT entered.
    A ** RABAX: level LEV_RX_SET_ALERT completed.
    A ** RABAX: level LEV_RX_COMMIT entered.
    A ** RABAX: level LEV_RX_COMMIT completed.
    A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A ** RABAX: level LEV_RX_RESET_PROGS entered.
    A ** RABAX: level LEV_RX_RESET_PROGS completed.
    A ** RABAX: level LEV_RX_STDERR entered.
    A Fri Nov 28 18:17:22 2008
    A
    A ABAP Program SAPLSALT .
    A Source LSALTU03 Line 192.
    A Error Code SYNTAX_ERROR.
    A Module $Id: //bas/700_REL/src/krn/runt/abgen.c#10 $ SAP.
    A Function ab_genprog Line 1551.
    A ** RABAX: level LEV_RX_STDERR completed.
    A ** RABAX: level LEV_RX_RFC_ERROR entered.
    A ** RABAX: level LEV_RX_RFC_ERROR completed.
    A ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A ** RABAX: level LEV_RX_IMC_ERROR entered.
    A ** RABAX: level LEV_RX_IMC_ERROR completed.
    A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A ** RABAX: level LEV_RX_END entered.
    A ** RABAX: level LEV_RX_END completed.
    A ** RABAX: end no http/smtp
    A ** RABAX: end RX_BTCHLOG|RX_VBLOG
    A Syntax error in program /1BCDWBEN/SAPLSEN0005 ..
    A
    A
    A Fri Nov 28 18:22:21 2008
    A GENER request remote generation: /1BCDWBEN/SAPLSEN0005.
    A *** ERROR => Syntax error in program /1BCDWBEN/SAPLSEN0005 http://abgen.c 1517
    A *** ERROR => > Include /1BCDWBEN/LSEN0005$56 line 7 http://abgen.c 1519
    A *** ERROR => > Unable to interpret "PMPORTING". Possible causes of error: Incorrect spelling or http://abgen.c 1521
    A *** ERROR => > comma error. http://abgen.c 1523
    A TH VERBOSE LEVEL FULL
    A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A ** RABAX: level LEV_RX_ROLLBACK entered.
    A ** RABAX: level LEV_RX_ROLLBACK completed.
    A ** RABAX: level LEV_RX_DB_ALIVE entered.
    A ** RABAX: level LEV_RX_DB_ALIVE completed.
    A ** RABAX: level LEV_RX_HOOKS entered.
    A ** RABAX: level LEV_RX_HOOKS completed.
    A ** RABAX: level LEV_RX_STANDARD entered.
    A ** RABAX: level LEV_RX_STANDARD completed.
    A ** RABAX: level LEV_RX_STOR_VALUES entered.
    A ** RABAX: level LEV_RX_STOR_VALUES completed.
    A ** RABAX: level LEV_RX_C_STACK entered.
    A ** RABAX: level LEV_RX_C_STACK completed.
    A ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A ** RABAX: level LEV_RX_INTERFACES entered.
    A ** RABAX: level LEV_RX_INTERFACES completed.
    A ** RABAX: level LEV_RX_GET_MESS entered.
    A ** RABAX: level LEV_RX_GET_MESS completed.
    A ** RABAX: level LEV_RX_INIT_SNAP entered.
    A ** RABAX: level LEV_RX_INIT_SNAP completed.
    A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A ** RABAX: level LEV_SN_END completed.
    A ** RABAX: level LEV_RX_SET_ALERT entered.
    A ** RABAX: level LEV_RX_SET_ALERT completed.
    A ** RABAX: level LEV_RX_COMMIT entered.
    A ** RABAX: level LEV_RX_COMMIT completed.
    A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A ** RABAX: level LEV_RX_RESET_PROGS entered.
    A ** RABAX: level LEV_RX_RESET_PROGS completed.
    A ** RABAX: level LEV_RX_STDERR entered.
    A Fri Nov 28 18:22:21 2008
    A
    A ABAP Program SAPLSALT .
    A Source LSALTU03 Line 192.
    A Error Code SYNTAX_ERROR.
    A Module $Id: //bas/700_REL/src/krn/runt/abgen.c#10 $ SAP.
    A Function ab_genprog Line 1551.
    A ** RABAX: level LEV_RX_STDERR completed.
    A ** RABAX: level LEV_RX_RFC_ERROR entered.
    A ** RABAX: level LEV_RX_RFC_ERROR completed.
    A ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A ** RABAX: level LEV_RX_IMC_ERROR entered.
    A ** RABAX: level LEV_RX_IMC_ERROR completed.
    A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A ** RABAX: level LEV_RX_END entered.
    A ** RABAX: level LEV_RX_END completed.
    A ** RABAX: end no http/smtp
    A ** RABAX: end RX_BTCHLOG|RX_VBLOG
    A Syntax error in program /1BCDWBEN/SAPLSEN0005 ..
    A
    A
    A Fri Nov 28 18:22:33 2008
    A GENER request remote generation: /1BCDWBEN/SAPLSEN0005.
    A
    A Fri Nov 28 18:22:34 2008
    A *** ERROR => Syntax error in program /1BCDWBEN/SAPLSEN0005 http://abgen.c 1517
    A *** ERROR => > Include /1BCDWBEN/LSEN0005$56 line 7 http://abgen.c 1519
    A *** ERROR => > Unable to interpret "PMPORTING". Possible causes of error: Incorrect spelling or http://abgen.c 1521
    A *** ERROR => > comma error. http://abgen.c 1523
    A TH VERBOSE LEVEL FULL
    A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A ** RABAX: level LEV_RX_ROLLBACK entered.
    A ** RABAX: level LEV_RX_ROLLBACK completed.
    A ** RABAX: level LEV_RX_DB_ALIVE entered.
    A ** RABAX: level LEV_RX_DB_ALIVE completed.
    A ** RABAX: level LEV_RX_HOOKS entered.
    A ** RABAX: level LEV_RX_HOOKS completed.
    A ** RABAX: level LEV_RX_STANDARD entered.
    A ** RABAX: level LEV_RX_STANDARD completed.
    A ** RABAX: level LEV_RX_STOR_VALUES entered.
    A ** RABAX: level LEV_RX_STOR_VALUES completed.
    A ** RABAX: level LEV_RX_C_STACK entered.
    A ** RABAX: level LEV_RX_C_STACK completed.
    A ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A ** RABAX: level LEV_RX_INTERFACES entered.
    A ** RABAX: level LEV_RX_INTERFACES completed.
    A ** RABAX: level LEV_RX_GET_MESS entered.
    A ** RABAX: level LEV_RX_GET_MESS completed.
    A ** RABAX: level LEV_RX_INIT_SNAP entered.
    A ** RABAX: level LEV_RX_INIT_SNAP completed.
    A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A ** RABAX: level LEV_RX_WRITE_SNAP entered.
    A ** RABAX: level LEV_SN_END completed.
    A ** RABAX: level LEV_RX_SET_ALERT entered.
    A ** RABAX: level LEV_RX_SET_ALERT completed.
    A ** RABAX: level LEV_RX_COMMIT entered.
    A ** RABAX: level LEV_RX_COMMIT completed.
    A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A ** RABAX: level LEV_RX_RESET_PROGS entered.
    A ** RABAX: level LEV_RX_RESET_PROGS completed.
    A ** RABAX: level LEV_RX_STDERR entered.
    A Fri Nov 28 18:22:34 2008
    A
    A ABAP Program SAPLSUSO .
    A Source LSUSOU02 Line 169.
    A Error Code SYNTAX_ERROR.
    A Module $Id: //bas/700_REL/src/krn/runt/abgen.c#10 $ SAP.
    A Function ab_genprog Line 1551.
    A ** RABAX: level LEV_RX_STDERR completed.
    A ** RABAX: level LEV_RX_RFC_ERROR entered.
    A ** RABAX: level LEV_RX_RFC_ERROR completed.
    A ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A ** RABAX: level LEV_RX_IMC_ERROR entered.
    A ** RABAX: level LEV_RX_IMC_ERROR completed.
    A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A ** RABAX: level LEV_RX_END entered.
    A ** RABAX: level LEV_RX_END completed.
    A ** RABAX: end RX_RFC
    A
    A Fri Nov 28 18:23:07 2008
    A GENER request remote generation: /1BCDWBEN/SAPLSEN0005.
    A *** ERROR => Syntax error in program /1BCDWBEN/

    Hi
    I'm not quite sure what you mean. I set the password for all users in the installation procedure manually, but it's the same password for all. I suppose it's possible i wrote it wrong twice in a row though.
    What users do you suggest I change? Looks to me like function SUSR_USER_CHANGE_PASSWORD_RFC is the problem (whatever that is), but I can't find a specific user that might be the cause problem. Could you be more specific?
    Re
    Dennis

  • Problem with Java Stack- dev_w2 log mentioned.

    Hi everyone, I have a problem with Java Stack, I could not connect to XI home page,
    I am unable to login to j2ee engine using visual Administrator.
    Please go through the log below. And help me out to resolve this issue and let me know what could be the problem.
    trc file: "dev_w2", trc level: 1, release: "640"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    B 
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' ...
    B  Library 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' loaded
    B  Version of 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.39)
    B  New connection 0 created
    M systemid   560 (PC with Windows NT)
    M relno      6400
    M patchlevel 0
    M patchno    43
    M intno      20020600
    M make:      multithreaded, Unicode
    M pid        4140
    M
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 2 4140) [dpxxdisp.c   1160]
    I  MtxInit: -2 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: JAVA is not active
    M  DpShMCreate: sizeof(wp_adm)          13160     (1316)
    M  DpShMCreate: sizeof(tm_adm)          2780232     (13832)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpShMCreate: sizeof(comm_adm)          290000     (580)
    M  DpShMCreate: sizeof(vmc_adm)          0     (372)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 060A0040, size: 3195320)
    M  DpShMCreate: allocated sys_adm at 060A0040
    M  DpShMCreate: allocated wp_adm at 060A1B58
    M  DpShMCreate: allocated tm_adm_list at 060A4EC0
    M  DpShMCreate: allocated tm_adm at 060A4EE8
    M  DpShMCreate: allocated wp_ca_adm at 0634BB30
    M  DpShMCreate: allocated appc_ca_adm at 063518F0
    M  DpShMCreate: allocated comm_adm_list at 06353830
    M  DpShMCreate: allocated comm_adm at 06353848
    M  DpShMCreate: allocated vmc_adm_list at 0639A518
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 0639A540
    M  DpShMCreate: allocated wall_adm at 0639A548
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 2 initializing ....
    X  <ES> InitFreeList
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M  calling db_connect ...
    C  Got ORACLE_HOME=c:\oracle\ora92 from environment
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPSXI's password
    C  Connecting as /@SXI on connection 0 ...
    C  Attaching to DB Server SXI (con_hdl=0,svchp=04494404,svrhp=04495074)
    C 
    C  Starting user session (con_hdl=0,svchp=04494404,srvhp=04495074,usrhp=0449D8AC)
    C 
    C  Now I'm connected to ORACLE
    C  Got SAPSXI's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=04494404,usrhp=0449D8AC)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPSXI/<pwd>@SXI on connection 0 ...
    C  Starting user session (con_hdl=0,svchp=04494404,srvhp=04495074,usrhp=0449D8AC)
    C  Now I'm connected to ORACLE
    C  Database NLS settings: AMERICAN_AMERICA.UTF8
    C  Database instance sxi is running on STARXI with ORACLE version 9.2.0.5.0 since 20081020
    B  Connection 0 opened
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20081020 123752 STARXI         
    M  db_connect o.k.
    I  MtxInit: 2 0 0
    M  SHM_PRES_BUF               (addr: 08230040, size: 4400128)
    M  SHM_ROLL_AREA          (addr: 62E40040, size: 77594624)
    M  SHM_PAGING_AREA          (addr: 08670040, size: 39845888)
    M  SHM_ROLL_ADM               (addr: 0AC80040, size: 775412)
    M  SHM_PAGING_ADM          (addr: 0AD40040, size: 525344)
    M  ThCreateNoBuffer          allocated 540152 bytes for 1000 entries at 0ADD0040
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 12160 bytes (50 server) at 0AE60040
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 2 initializing ....
    X  Using implementation flat
    X  ES initialized.
    B 
    B  db_con_shm_ini:  WP_ID = 2, WP_CNT = 10
    B  dbtbxbuf: Buffer TABL  (addr: 103D00C8, size: 30000128, end: 1206C4C8)
    B  dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 14302848
    B  ***LOG BB0=> buffer TABL       started with length 30000128   bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]
    B  dbtbxbuf: Buffer TABLP (addr: 0E4000C8, size: 10240000, end: 0EDC40C8)
    B  dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
    B  dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
    B  dbtbxbuf: protect_shm = 0, force_checks = 0
    B  dbtbxbuf: tsize_retry = 5046656
    B  ***LOG BB0=> buffer TABLP      started with length 10240000   bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]
    B  dbtbxbuf: Reading TBX statistics:
    B  dbtbxbuf: 41 object entries precreated
    B  Layout of EIBUF buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 344 = 344
    B  2: 10 * 20 = 200
    B  3: 4001 * 48 = 192048
    B  4: 2000 * 232 = 464000
    B  5: 4001 * 4 = 16004
    B  6: 1 * 200 = 200
    B  7: 65 * 4 = 260
    B  8: 13754 * 256 = 3521024
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    B  dbexpbuf: Buffer EIBUF (addr: 0EDE00D0, size: 4194304, end: 0F1E00D0)
    B  ***LOG BB0=> buffer EIBUF      started with length 4096k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
    B  Layout of ESM   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 344 = 344
    B  2: 10 * 20 = 200
    B  3: 4001 * 48 = 192048
    B  4: 2000 * 232 = 464000
    B  5: 4001 * 4 = 16004
    B  6: 1 * 200 = 200
    B  7: 65 * 4 = 260
    B  8: 13754 * 256 = 3521024
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    B  dbexpbuf: Buffer ESM   (addr: 0F1F00D0, size: 4194304, end: 0F5F00D0)
    B  ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
    B  Layout of CUA   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 344 = 344
    B  2: 10 * 20 = 200
    B  3: 3001 * 48 = 144048
    B  4: 1500 * 232 = 348000
    B  5: 3001 * 4 = 12004
    B  6: 1 * 200 = 200
    B  7: 193 * 4 = 772
    B  8: 5012 * 512 = 2566144
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    B  dbexpbuf: Buffer CUA   (addr: 0F6000D0, size: 3072000, end: 0F8EE0D0)
    B  ***LOG BB0=> buffer CUA        started with length 3000k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
    B  Layout of OTR   buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 344 = 344
    B  2: 10 * 20 = 200
    B  3: 4001 * 48 = 192048
    B  4: 2000 * 232 = 464000
    B  5: 4001 * 4 = 16004
    B  6: 1 * 200 = 200
    B  7: 81 * 4 = 324
    B  8: 13754 * 256 = 3521024
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    B  dbexpbuf: Buffer OTR   (addr: 0F8F00D0, size: 4194304, end: 0FCF00D0)
    B  ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
    B  ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#1 @ 2206] [dbcalbuf2206 ]
    B  dbtran INFO (init_connection '<DEFAULT>' [ORACLE:640.00]):
    B   max_blocking_factor =  15,  max_in_blocking_factor      =   5,
    B   min_blocking_factor =  10,  min_in_blocking_factor      =   5,
    B   prefer_union_all    =   0,  prefer_union_for_select_all =   0,
    B   prefer_fix_blocking =   0,  prefer_in_itab_opt          =   1,
    B   convert AVG         =   0,  alias table FUPD            =   0,
    B   escape_as_literal   =   1,  opt GE LE to BETWEEN        =   0,
    B   select *            =0x0f,  character encoding          = STD / <none>:-,
    B   use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
    B                         rule_fae->0, concat_fae->0, concat_fae_or->0
    M 
    M  PfHIndInitialize: memory=<0AEEC488>, header=<0AEEC488>, records=<0AEEC4D0>
    M  SecAudit(init_sel_info): init of SCSA completed: 02 slots used
    M  ***LOG AV6=> 02& [rsauwr1.c    1619]
    M  SsfSapSecin: automatic application server initialization for SAPSECULIB
    N  SsfSapSecin: Looking for PSE in database
    N  SsfPseLoad: started...(path=C:\usr\sap\SXI\DVEBMGS00\sec, AS=starxi, instanceid=00)
    N 
    N  SsfPseLoad: Downloading file C:\usr\sap\SXI\DVEBMGS00\sec\SAPSYS.pse (client:    , key: SYSPSE, len: 1078)
    N  SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
    N  MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
    N  MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
    M  rdisp/reinitialize_code_page -> 0
    M  icm/accept_remote_trace_level -> 0
    M  rdisp/no_hooks_for_sqlbreak -> 0
    S 
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 121963B0
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      intervals: query=50, rescan=1800, global=300 info=120
    S      processing queue enabled
    S  creating spool memory service RSPO-RCLOCKS at 0FEB00A8
    S  doing lock recovery
    S  setting server cache root
    S  using server cache size 100 (prof=100)
    S  creating spool memory service RSPO-SERVERCACHE at 0FEB0370
    S    using messages for server info
    S  size of spec char cache entry: 297028 bytes (timeout 100 sec)
    S  size of open spool request entry: 2132 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A 
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  PXA: Fragment Size too small: 73 MB, reducing # of fragments
    A  System page size: 4kb, admin_size: 5032kb.
    A  PXA allocated (address 67850040, size 150000K)
    A  System name
    A  ORACLE...........................SXI........20081004121019.....................................
    A  is used for RFC security.
    A  Sharedbuffer token: 41534050...33 (len: 111)====== 2b61c190857e36a8681ef39a...
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    A  ABAP ShmAdm initialized (addr=579F4000 leng=20955136 end=58DF0000)
    A  >> Shm MMADM area (addr=57E69DF0 leng=126176 end=57E88AD0)
    A  >> Shm MMDAT area (addr=57E89000 leng=16150528 end=58DF0000)
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    A  Hotpackage version: 9
    M  ThrCreateShObjects          allocated 10568 bytes at 0FFD0040
    M  ThVBStartUp: restart pending update requests
    M 
    M  ThVBAutoStart: update-auto-delete
    N  SsfSapSecin: putenv(SECUDIR=C:\usr\sap\SXI\DVEBMGS00\sec): ok
    N  SsfSapSecin: PSE C:\usr\sap\SXI\DVEBMGS00\sec\SAPSYS.pse found!
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is C:\usr\sap\SXI\SYS\exe\run\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N  ===...sucessfully completed.
    N  =================================================
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    W  =================================================
    W  === ipl_Init() called
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 640, [6400.0.43.20020600]
    W    ITS Plugin: Int.version, [31]
    W    ITS Plugin: Feature set: [3]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    M  MBUF info for hooks: MS component UP
    M  ThSetEnqName: set enqname by profile
    M  ThISetEnqname: enq name = >starxi_SXI_00                           <
    E 
    E  *************** EnqId_EN_ActionAtMsUpHook ***************
    E  Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
    E  Enqueue Info: enque/disable_replication = 2
    E  Enqueue Info: replication disabled
    E 
    E 
    E  *************** ObjShMem_CheckAuthoritativeEnqId ***************
    E  Checking authoritative EnqId from EnqSrv into ObjShMem
    E  ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
    E  EnqId.EnqTabCreaTime    = -999
    E  EnqId.RandomNumber      = -999
    E  ReqOrd.TimeInSecs       = -999
    E  ReqOrd.ReqNumberThisSec = -999
    E  ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
    E  EnqId.EnqTabCreaTime    = -999
    E  EnqId.RandomNumber      = -999
    E  ReqOrd.TimeInSecs       = -999
    E  ReqOrd.ReqNumberThisSec = -999
    E  ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
    E  ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
    E  EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
    E  -SHMEM--
    E  EnqId:          EnqTabCreaTime/RandomNumber    = 20.10.2008 12:38:10  1224486490 / 4140
    E  ReqOrd at Srv:  TimeInSecs/ReqNumberThisSec    = 20.10.2008 12:38:11  1224486491 / 1
    E  ReqOrd at Cli:  TimeInSecs/ReqNumberThisSec    = 20.10.2008 12:38:11  1224486491 / 1
    E  Status:         STATUS_OK
    E  -
    M  ThActivateServer: state = STARTING
    L  Begin of BtcSysStartRaise
    L  Raise event SAP_SYSTEM_START with parameter <starxi_SXI_00       >
    L  End of BtcSysStartRaise
    I 
    I  MPI<c>9#3 Peak buffer usage: 5 (@ 64 KB)
    M 
    M  *** WARNING => ThCheckReqInfo: req_info & DP_CANT_HANDLE_REQ
    M  return number range rc 12
    M  *** WARNING => ThNoGet: get from object (cli/obj/subobj/range = 000/ALAUTOUID /      /01) returned rc 12
    S 
    S  server @>SSRV:starxi_SXI_00@< appears or changes (state 1)
    B  table logging switched off for all clients
    S 
    S  server @>SSRV:starxi_SXI_00@< appears or changes (state 1)
    M 
    M  hostaddrlist return 0
    M 
    M  hostaddrlist return 0
    M 
    M  hostaddrlist return 0
    M  hostaddrlist return 0
    M  hostaddrlist return 0
    Regards,
    Varun.

    You probably made the same mistake as I did and added the tables manually to the "sample" database instead of the "sun-appserv-samples" database.
    marc

  • MEMORY_NO_MORE_PAGING problem

    Hi,
      I need help with this issue:
      I am facing a MEMORY_NO_MORE_PAGING problem, and I don't know how to solve it. This problem is happening often during the week.
      As an example I pasted on DUMP log. In addition, at the beginning I pasted the screen information of transaction ST02.
      I have already checked the disk space and itu2019s ok, there is plenty of free space.     
    Best regards,
    Fernando.
    ST02 information:
    System: SRV-SAPPROD_PRO_00                        Tune summary
    Date & time of snapshot: 05.11.2009  11:14:41     Startup: 19.10.2009  08:15:59
           Buffer            Hitratio   Allocated         Free space        Dir. size      Free directory         Swaps       Database
                                                               Entries      Entries                          accesses
    Nametab (NTAB)
       Table definition        99,28         6.447            0     0,00        30.000            0     0,00        17.354      106.524
       Field description       99,33        49.289        2.299     4,79        30.000       11.890    39,63        45.037       70.424
       Short NTAB              99,79         3.498        2.755    91,83         7.500        6.303    84,04             0        1.212
       Initial records         99,08         9.998        8.192    86,23         7.500          653     8,71        41.690       48.659
    Program                   98,99       400.000        1.102     0,29       100.000       89.560    89,56       159.655      520.665
    CUA                       99,89         5.000          208     4,67         2.500        1.464    58,56             0        1.360
    Screen                    99,88        19.531        6.272    32,31         2.000        1.298    64,90             0        1.667
    Calendar                 100,00           488          369    76,88           200           54    27,00             0          146
    OTR                      100,00         4.096        3.657   100,00         2.000        2.000   100,00             0            0
    Tables
       Generic key             99,92        48.828       20.810    43,46         5.000          262     5,24           168       97.934
       Single record           92,56        30.000          479     1,60           500          394    78,80            70      439.952
    Export/import             87,68         4.096          110     3,01         2.000          187     9,35       245.701            0
    Exp./Imp. SHM             95,02         4.096        3.581    97,92         2.000        1.999    99,95             0            0
         SAP memory              Current use      Max. use  In memory   On disk
      Roll area                 2,29      6.009      8.728     65.536    196.608
      Paging area              91,36    239.487    262.136    124.480    137.664
      Extended Memory          64,86  1.325.056  1.728.512  2.042.880
      Heap Memory                             0  1.356.990
    DUMP LOG:
    Errores tiempo ejec.   MEMORY_NO_MORE_PAGING
    Fecha y hora           05.11.2009 10:43:41
    Txt.brv.
    SAP paging overflow when storing data in the ABAP/4 memory.
    ¿Qué ha sucedido?
    The current program requested storage space from the SAP paging area,
    but this request could not be fulfilled.
    of this area in the SAP system profile.
    Notas para corregir errores
    |    The amount of storage space (in bytes) filled at termination time was:                   
    Roll area...................... 8112
    Extended memory (EM)........... 143208832
    Assigned memory (HEAP)......... 0
    Short area..................... " "
    Paging area.................... 32768
    Maximum address space.......... " "
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "MEMORY_NO_MORE_PAGING" C
    "SAPDBIOC" or "DBIOCF02"
    "FILL_MEMORY"
    Entorno sistema
    SAP Release.............. "640"
    Application server....... "SRV-SAPPROD"
    Network address.......... "172.16.1.11"
    Operating system......... "Windows NT"
    Release.................. "5.2"
    Hardware type............ "4x Intel 801586"
    Character length......... 8 Bits
    Pointer length........... 32 Bits
    Work process number...... 3
    Short dump setting....... "full"
    Database server.......... "SRV-SAPPROD"
    Database type............ "MSSQL"
    Database name............ "PRO"
    Database owner........... "pro"
    Character set............ "Spanish_Spain.1252"
    SAP kernel............... "640"
    Created on............... "Aug 7 2009 22:57:17"
    Created in............... "NT 5.2 3790 Service Pack 2 x86 MS VC++ 14.00"
    Database version......... "SQL_Server_9.00 "
    Patch level.............. "295"
    Patch text............... " "
    Supported environment....
    Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version..... "640"
    Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
    Windows NT 6.0"
    Memory usage.............
    Roll..................... 8112
    EM....................... 143208832
    Heap..................... 0
    Page..................... 32768
    MM Used.................. 121508448
    MM Free.................. 9141720
    SAP Release.............. "640"
    Usuario y transacción
    Client.............. 300
    User................ "AMATUCHESKI"
    Language key........ "S"
    Transaction......... "COOISPI "
    Program............. "SAPDBIOC"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
    Líneas de pila C en núcleo (estructura diferente según la plataforma)
    SAP (R) - R/3(TM) Callstack, Version 1.0
    Copyright (C) SAP AG. All rights reserved.
    Callstack without Exception:
    App       : disp+work.EXE (pid=5596)
    When      : 11/5/2009 10:43:38.343
    Threads   : 2
    Computer Name       : SRV-SAPPROD
    User Name           : SAPServicePRO
    Number of Processors: 4
    Processor Type: x86 Family 15 Model 4 Stepping 3
    Windows Version     : 5.2 Current Build: 3790
    Stack Dump for Thread Id 15e0
    Edited by: Fernando Zanelli on Nov 5, 2009 1:29 PM

    Hi,
               After the first chart that displays the actual system memory status you can find the system parameters.The rdisp/PG_MAXFS as you can see is deactivated and his default value is 32768.
               It should stay deactivated or I need to bring it active?
    SAP Memory St02:
    SAP memory              Current use      Max. use  In memory   On disk
                                         [%]      [kB]            [kB]          [kB]       [kB]
    Roll area                   2,15      5.630      6.888     65.536    196.608
    Paging area              91,63    240.203   262.136    124.480    137.664
    Extended Memory     60,75  1.241.088  1.514.496  2.042.880
    Heap Memory                             0          0
    system parameters:
    |X|abap/fieldexit                             |yes
    |X|login/system_client                        |300
    |X|SAPSYSTEMNAME                              |PRO
    |X|INSTANCE_NAME                              |DVEBMGS00
    |X|SAPSYSTEM                                  |00
    |X|rdisp/wp_no_dia                            |8
    |X|rdisp/wp_no_btc                            |4
    |X|rdisp/wp_no_vb                             |3
    |X|rdisp/wp_no_vb2                            |2
    |X|rdisp/wp_no_enq                            |1
    |X|rdisp/wp_no_spo                            |2
    |X|SAPGLOBALHOST                              |srv-sapprod
    |X|PHYS_MEMSIZE                               |1996
    |X|DIR_TRANS                                  |C:\usr\sap\trans
    |X|icm/server_port_0                          |PROT=HTTP,PORT=8000
    |X|abap/buffersize                            |400000
    |X|zcsa/table_buffer_area                     |50000000
    |X|rtbb/buffer_length                         |30000
    |X|rsdb/cua/buffersize                        |5000
    |X|gw/max_conn                                |2000
    |X|gw/max_sys                                 |2000
    |X|gw/max_overflow_size                       |25000000
    |X|enque/table_size                           |10000
    |X|zcsa/presentation_buffer_area              |20000000
    |X|rdisp/appc_ca_blk_no                       |100
    |X|rdisp/wp_ca_blk_no                         |300
    |X|rsdb/ntab/entrycount                       |30000
    |X|rsdb/ntab/ftabsize                         |48000
    |X|rsdb/ntab/irbdsize                         |9500
    |X|rsdb/ntab/sntabsize                        |3000
    |X|DIR_ROLL                                   |C:\usr\sap\PRO\DVEBMGS00\data
    |X|DIR_PAGING                                 |C:\usr\sap\PRO\DVEBMGS00\data
    |X|DIR_DATA                                   |C:\usr\sap\PRO\DVEBMGS00\data
    |X|DIR_REORG                                  |C:\usr\sap\PRO\DVEBMGS00\data
    |X|DIR_TEMP                                   |.
    |X|DIR_SORTTMP                                |C:\usr\sap\PRO\DVEBMGS00\data
    |X|zcsa/system_language                       |S
    |X|zcsa/installed_languages                   |EDPS
    |X|install/codepage/appl_server               |1100
    |X|abap/use_paging                            |0
    | |ztta/roll_first                            |1024
    | |ztta/roll_area                             |2000896
    |X|rdisp/ROLL_SHM                             |8192
    | |rdisp/ROLL_MAXFS                           |32768
    |X|rdisp/PG_SHM                               |15560
    | |rdisp/PG_MAXFS                             |32768
    | |abap/heap_area_dia                         |2000683008
    | |abap/heap_area_nondia                      |2000683008
    | |abap/heap_area_total                       |2000683008
    | |abap/heaplimit                             |40894464
    |X|abap/swap_reserve                          |20971520
    | |ztta/roll_extension                        |2000683008
    | |em/initial_size_MB                         |1840
    |X|em/blocksize_KB                            |1024
    |X|em/stat_log_size_MB                        |20
    |X|em/stat_log_timeout                        |0
    | |em/address_space_MB                        |512

  • Re-send with more information on  Modem installation problem- list port fail in admintools

    Background:
    If admintool can set serial I could have set it with a click.
    The error is "list port fail in "
    I have following many example including Celeste (stokey.com), I am totally lost with her instruction. I am a new-hand in SUN SOLARIS 8 INTEL. NEED good guidance and helping to set up an external Zoom 56 K modem on com 1.
    ==============================================================
    I was suspect a lot of work from internet is a copy of another.
    ===============================================================
    #sacdm -l t ttymon
    get:
    zsmon ttymon - 0 ENBALE /usr/lib/saf/ttymon
    #pmadm -l
    get:
    no service defined.
    There is no cua * under /dev
    These is nothing under /dev/term
    I have a number of error with the following script and I can screen-print and copy and then paste here.
    There are problem with the cua and term/$port.
    SO please help and guide.
    sunlearner.
    #!/sbin/sh
    # add_modem shell script. Must be run as root from bourne shell
    # Change these parameters as needed for your particular needs.
    # PARAMETER MEANING
    # PORT Port you want to set up. "a" or "b"
    # TTYSPEED Speed setting, from /etc/ttydefs
    # LOGINMSG The login message which will be displayed.
    # -p zsmon PMTAG, name of this port monitor
    # -s ttya SVCTAG, modem is on ttya. you may want ttyb
    # -d /dev/term/$PORT Actual port device.
    # -l contty5H Ttylabel, defined in /etc/ttydefs file. (speed
    # setting. contty5H=19200 baud)
    # -b Flag for bidirectional port use
    # -S n Turn software carrier off (modem supplies
    # hardware carrier detect signal)
    # "dial in/out on serial port" This is a comment you'll see on pmadm -l
    LOGINMSG="Always be nice to your sysadm. You may now login. "
    # set PORT = either a or b
    PORT="a"
    # choose your speed setting. See /etc/ttydefs for more, or build your
    # own from the examples in the rest of this article.
    # contty5H = 19200bps, 7 bits even parity, as supplied by Sun
    # conttyH = 9600bps, 7 bits even parity, as supplied by Sun
    TTYSPEED="contty5H"
    # change ownership of outgoing side of port to user uucp, group tty.
    # change ownership of incoming side of port to user root, group tty.
    chown uucp /dev/cua/$PORT; chgrp tty /dev/cua/$PORT
    chown root /dev/term/$PORT; chgrp tty /dev/term/$PORT
    # Remove any existing port monitor on this port.
    # You can ignore any error messages from this next command.
    # If you see the message "Invalid request, ttya does not exist under zsmon",
    # You may be trying to remove a port monitor which does not exist.
    /usr/sbin/pmadm -r -p zsmon -s tty$PORT
    # Create the new port monitor
    /usr/sbin/pmadm -a -p zsmon -s tty$PORT -i root \
    -v `/usr/sbin/ttyadm -V` -fu -m "`/usr/sbin/ttyadm \
    -p "$LOGINMSG" -d /dev/term/$PORT -s /usr/bin/login -l $TTYSPEED -b \
    -S n -m ldterm,ttcompat`" -y "dial in/out on serial port"
    ############ end of add_modem script ###################################

    The lack of /dev/cua etc is worrying - apparently there is an ACPI
    bug with certain BIOSes which means certain device nodes are not created (often floppy, printer, serial). Turning off ACPI in the BIOS if this option exists on your HW, followed by a reconfiguration boot (b -r) should help. When you have the device nodes in place, the guidance from Stokeley should work - you might also check the
    archives of the solarisonintel list at www.egroups.com

Maybe you are looking for