Problems in file to idoc scenario
hi all
I am doing file to IDOC Scenario. In that I am getting the successful message but the Fields which I mapped to the IDOC is not populated in the IDOC.
In message mapping also it was showing the same thing. when I entered the fields of the file manually it was coming into the idoc and if i gave any file then it was not populated.
Can any one help us.
Regards
Vasu
Hello
For that u will have to change the occurunces in messages tab in mappings and do a split by value in mappings to generate 4 different messages.
secondly i hope ur using BPM for the same. in that case u can use parForEach to post 4 IDocs at a time.
regards
rajeev
Similar Messages
-
Problem in File to IDOC Scenario
Hi,
I am trying to test the demo example for Flight Booking using the "File Sender to IDoc" Scenario. I have done all the settings. As a last step after I copy the file in
[XI-hostname]\sapmnt\trans\tmp\fileadapter\group[XX] as per the Demo example guide and activate the changes for File_Sender communication channel, no action is triggered.
The file remains in the directory. When I want to see if my adapter is fine and I check the Adapter Lists in the Adapter Monitoring, it shows only JPR Adapter and that too in RED.
Then I check the tracefiles and find this error.
Date : 04/05/2006
Time : 16:44:52:264
Category : /Applications/ExchangeInfrastructure/Directory
Message ID : 00B0D03E9B4F005A0000000D000001F4000410AB0985C603
Severity : Error
Location : XIDIR.com.sap.aii.ibdir.server.abapcache.ErrorHandler
Source Name : /Applications/ExchangeInfrastructure/Directory
Thread : SAPEngine_Application_Thread[impl:3]_3
Message : Failure at Cache-Refresh data consumption !!!
<?xml version="1.0" encoding="UTF-8"?>
<CacheRefreshError>
<EngineType>AE</EngineType>
<EngineName>af.aba.singdemo1</EngineName>
<RefreshMode>C</RefreshMode>
<Channel>
<PartyName></PartyName>
<ServiceName>XI_LEGACY_BS_00</ServiceName>
<ChannelName>File_Sender</ChannelName>
<ChannelObjectId>838401f3335236bbadd7086c6711b070</ChannelObjectId>
<ChannelError>
<Message>
Could not parse Channel 'File_Sender'(ObjectId: 838401f3335236bbadd7086c6711b070) AdapterType: File|http://sap.com/xi/XI/System|3b787a8035c111d6bbe0efe50a1145a5:
</Message>
<Trace>
com.sap.aii.af.service.cpa.CPAException: Schema not available for File|3b787a8035c111d6bbe0efe50a1145a5|http://sap.com/xi/XI/System.
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataSAXHandler.endElement(DirectoryDataSAXHandler.java:262)
at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:154)
at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1826)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1722)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2298)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1719)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2701)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:126)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:136)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:209)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:270)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:331)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:143)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataParser.updateCentralCache(DirectoryDataParser.java:54)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.updateCacheWithDirectoryData(CacheManager.java:713)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:595)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:440)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
</Trace>
</ChannelError>
</Channel>
</CacheRefreshError>
Datasource : 48696150:E:\usr\sap\ABA\DVEBMGS04\j2ee\cluster\server0\log\applications.log
Application : sap.com/com.sap.xi.directory
Argument Objs :
Arguments :
Dsr Component : singdemo1_ABA_48696150
Dsr Transaction : 72d10590c48011da8a7100b0d03e9b4f
Dsr User : Guest
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives : XIDIR.com.sap.aii.ibdir.server.abapcache.ErrorHandler
Resource Bundlename :
Session : 3816
Source : /Applications/ExchangeInfrastructure/Directory
ThreadObject : SAPEngine_Application_Thread[impl:3]_3
Transaction : SAP J2EE Engine JTA Transaction : [2ffffffe7b5600a31]
User : XIAFUSER
Any help will be great.
Regards,
ShubhamHi Manish,
I updated the same and now when I activate the changes in my File_Sender communication channel its still not working.
I checked the Message Monitoring and the message fails to get delivered.
Here is the Message Audit Log.
2006-04-11 13:21:51 Success Channel File_Sender: Send binary file "
singdemo1\sapmnt\trans\tmp\fileadapter\group00\Booking00.xml". Size 526 with QoS EO
2006-04-11 13:21:54 Success Application attempting to send an XI message asynchronously using connection AFW.
2006-04-11 13:21:55 Success Trying to put the message into the send queue.
2006-04-11 13:21:56 Success Message successfully put into the queue.
2006-04-11 13:21:56 Success The application sent the message asynchronously using connection AFW. Returning to application.
2006-04-11 13:21:56 Success Confirmation mode test found. File will be resent next time
2006-04-11 13:21:56 Success The message was successfully retrieved from the send queue.
2006-04-11 13:21:57 Success The message status set to DLNG.
2006-04-11 13:23:01 Error Transmitting the message to endpoint http://singdemo1:8004/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500 : Timeout.
2006-04-11 13:23:03 Success The asynchronous message was successfully scheduled to be delivered at Tue Apr 11 13:28:01 GMT+08:00 2006.
2006-04-11 13:23:06 Success The message status set to WAIT.
2006-04-11 13:28:02 Success Retrying to send message. Retry: 1
2006-04-11 13:28:02 Success The message was successfully retrieved from the send queue.
2006-04-11 13:28:02 Success The message status set to DLNG.
2006-04-11 13:29:04 Error Transmitting the message to endpoint http://singdemo1:8004/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500 : Timeout.
2006-04-11 13:29:04 Success The asynchronous message was successfully scheduled to be delivered at Tue Apr 11 13:34:04 GMT+08:00 2006.
2006-04-11 13:29:04 Success The message status set to WAIT.
2006-04-11 13:34:12 Success Retrying to send message. Retry: 2
2006-04-11 13:34:12 Success The message was successfully retrieved from the send queue.
2006-04-11 13:34:12 Success The message status set to DLNG.
2006-04-11 13:35:15 Error Transmitting the message to endpoint http://singdemo1:8004/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500 : Timeout.
2006-04-11 13:35:15 Success The asynchronous message was successfully scheduled to be delivered at Tue Apr 11 13:40:15 GMT+08:00 2006.
2006-04-11 13:35:15 Success The message status set to WAIT.
2006-04-11 13:40:15 Success Retrying to send message. Retry: 3
2006-04-11 13:40:15 Success The message was successfully retrieved from the send queue.
2006-04-11 13:40:15 Success The message status set to DLNG.
2006-04-11 13:41:17 Error Transmitting the message to endpoint http://singdemo1:8004/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500 : Timeout.
2006-04-11 13:41:17 Error The message status set to NDLV.
What can be the problems?
Regards,
Shubham -
Problem with File to IDOC scenario
Hello,
I try to implement our first scenario to IDOC.
In TOC SXMB_MONI I have to errors
1. <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
2. <SAP:Stack>Unable to convert sender service aaa_Sender_Service to an ALE logical system</SAP:Stack>
Any idea how I can solve this problems?
EladHI,
I think u have not done the configuration at the R3 end....
Just go through the below step by step process of FILE to IDOC. and check whether u have done the same configuration for ur scenario....I dont know what all configuration u have done....
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Thnx
Chirag -
Getting problem in File to IDOC scenario
Hi,
In SXMB_MONI, I am getting an error "Message has error status on outbound side". file is being picked by XI and it is not appearing in the R/3 system as IDOC. I am getting black & white chequered flag at left side and red flag at right side in the SXMB_MONI. Plz help me in this regard.
Thanks
Raghavesh.Hi Divija,
Thanks for ur reply.Mapping is done correctly. I have tested it and executed successfully.
The error message is "Message has error status on outbound side". I checked the Message ID about error, but i couldn't found any error in that.Plz check the following payload below.----
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Response
-->
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>087E57E0-25F3-11DB-AB31-001143D6B120</SAP:MessageId>
<SAP:TimeSent>2006-08-07T08:59:28Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>FILE_TO_IDOC_BS</SAP:Service>
<SAP:Interface namespace="http://filetoidoc/xi">ZEP_TO_IDES_MI</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>SAPIDES</SAP:Service>
<SAP:Interface namespace="urn:sap-com:document:sap:idoc:messages">DEBMAS.DEBMAS03</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="urn:sap-com:document:sap:idoc:messages">DEBMAS.DEBMAS03</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2006-08-07T08:59:28Z" wasRead="false">
<SAP:Engine type="AE">af.xi2.igatesap09</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
<SAP:MessageId>087E57E0-25F3-11DB-AB31-001143D6B120</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
- <SAP:Hop timeStamp="2006-08-07T08:59:28Z" wasRead="false">
<SAP:Engine type="IS">is.00.igatesap09</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>087E57E0-25F3-11DB-AB31-001143D6B120</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2006-08-07T08:59:29Z" wasRead="false">
<SAP:Engine type="IS">is.00.igatesap09</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">IDoc</SAP:Adapter>
<SAP:MessageId>087E57E0-25F3-11DB-AB31-001143D6B120</SAP:MessageId>
<SAP:Info>0000000000045522;</SAP:Info>
</SAP:Hop>
</SAP:HopList>
- <SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
<SAP:TABNAM>EDI_DC40</SAP:TABNAM>
<SAP:MANDT>100</SAP:MANDT>
<SAP:DOCREL>640</SAP:DOCREL>
<SAP:DOCNUM>0000000000045522</SAP:DOCNUM>
<SAP:DIRECT>2</SAP:DIRECT>
<SAP:IDOCTYP>DEBMAS03</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>DEBMAS</SAP:MESTYP>
<SAP:MESCOD />
<SAP:MESFCT />
<SAP:SNDPOR>SAPXI2</SAP:SNDPOR>
<SAP:SNDPRN>FILETOIDOC</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:SNDPFC />
<SAP:RCVPOR>SAPDES</SAP:RCVPOR>
<SAP:RCVPRN>IGATE_800</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
<SAP:RCVPFC />
<SAP:TEST />
<SAP:SERIAL />
<SAP:EXPRSS />
<SAP:STD />
<SAP:STDVRS />
<SAP:STATUS>03</SAP:STATUS>
<SAP:OUTMOD />
<SAP:SNDSAD />
<SAP:SNDLAD />
<SAP:RCVSAD />
<SAP:RCVLAD />
<SAP:STDMES />
<SAP:REFINT />
<SAP:REFGRP />
<SAP:REFMES />
<SAP:CREDAT>2006-08-07</SAP:CREDAT>
<SAP:CRETIM>04:59:29</SAP:CRETIM>
<SAP:ARCKEY>087E57E025F311DBAB31001143D6B120</SAP:ARCKEY>
</SAP:IDocOutbound>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20060807</SAP:Date>
<SAP:Time>045928</SAP:Time>
<SAP:Host>iGateSAP09</SAP:Host>
<SAP:SystemId>XI2</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>ORACLE</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>003</SAP:ProcStatus>
<SAP:AdapterStatus>001</SAP:AdapterStatus>
<SAP:User>XIAFUSER</SAP:User>
<SAP:TraceLevel>3</SAP:TraceLevel>
<SAP:Logging>1</SAP:Logging>
<SAP:LogSeqNbr>008</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId />
<SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId>
<SAP:PipelineService />
<SAP:QIdInternal>XBTO3___0000</SAP:QIdInternal>
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="100">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID">C0A84641121044D700F02DB4</SAP:EOReferenceRuntime>
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID">C0A84641121044D700F12DB5</SAP:EOReferenceOutbound>
<SAP:MessageSizePayload>752</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>3020</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>752</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>1124</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>XIRA</SAP:AdapterInbound>
<SAP:AdapterOutbound>IDOC</SAP:AdapterOutbound>
<SAP:RandomNumber>81</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="iGateSAP09">20060807085928.765</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="iGateSAP09">20060807085928.781</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="iGateSAP09">20060807085928.781</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="iGateSAP09">20060807085928.781</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="iGateSAP09">20060807085928.781</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="iGateSAP09">20060807085928.859</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="iGateSAP09">20060807085928.875</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="iGateSAP09">20060807085928.875</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="iGateSAP09">20060807085928.89</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="iGateSAP09">20060807085928.89</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="iGateSAP09">20060807085928.906</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="iGateSAP09">20060807085928.906</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="iGateSAP09">20060807085928.906</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="iGateSAP09">20060807085928.984</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="iGateSAP09">20060807085929.0</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="end" host="iGateSAP09">20060807085929.015</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="begin" host="iGateSAP09">20060807085929.015</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="end" host="iGateSAP09">20060807085929.031</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="begin" host="iGateSAP09">20060807085929.046</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="end" host="iGateSAP09">20060807085929.062</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:OutboundBinding xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SAP:OutboundBindingEntry version="30">
<SAP:OutboundBindingObjectId>7E9DD53BBCC334B78F5D7E5373481745</SAP:OutboundBindingObjectId>
<SAP:FromPartyName />
<SAP:FromServiceName>FILE_TO_IDOC_BS</SAP:FromServiceName>
<SAP:ToPartyName />
<SAP:ToServiceName>SAPIDES</SAP:ToServiceName>
<SAP:ToInterfaceName>DEBMAS.DEBMAS03</SAP:ToInterfaceName>
<SAP:ToInterfaceNamespace>urn:sap-com:document:sap:idoc:messages</SAP:ToInterfaceNamespace>
- <SAP:OutboundBindingAttributes>
<SAP:AdapterTypeData xmlns:SAP="http://sap.com/xi/XI/Message/30" />
</SAP:OutboundBindingAttributes>
- <SAP:HeaderMapping>
<SAP:FieldMapping xmlns:SAP="http://sap.com/xi/XI/Message/30" />
</SAP:HeaderMapping>
- <SAP:ChannelEntry version="30">
<SAP:PartyName xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:ServiceName xmlns:SAP="http://sap.com/xi/XI/Message/30">SAPIDES</SAP:ServiceName>
<SAP:ChannelName xmlns:SAP="http://sap.com/xi/XI/Message/30">ZEP_TO_IDES_RCC</SAP:ChannelName>
<SAP:AdapterName xmlns:SAP="http://sap.com/xi/XI/Message/30">IDoc</SAP:AdapterName>
<SAP:AdapterNamespace xmlns:SAP="http://sap.com/xi/XI/Message/30">http://sap.com/xi/XI/System</SAP:AdapterNamespace>
<SAP:AdapterSWCV xmlns:SAP="http://sap.com/xi/XI/Message/30">3B787A8035C111D6BBE0EFE50A1145A5</SAP:AdapterSWCV>
<SAP:AdapterEngineType xmlns:SAP="http://sap.com/xi/XI/Message/30">IS</SAP:AdapterEngineType>
<SAP:AdapterEngineName xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:MessageProtocol xmlns:SAP="http://sap.com/xi/XI/Message/30">IDoc</SAP:MessageProtocol>
<SAP:MessageProtocolVersion xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:TransportProtocol xmlns:SAP="http://sap.com/xi/XI/Message/30">IDoc</SAP:TransportProtocol>
<SAP:TransportProtocolVersion xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:ChannelDirection xmlns:SAP="http://sap.com/xi/XI/Message/30">O</SAP:ChannelDirection>
<SAP:FromPartyAgency xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:FromPartySchema xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:ToPartySchema xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:ToPartyAgency xmlns:SAP="http://sap.com/xi/XI/Message/30" />
- <SAP:ChannelAttributes xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:AdapterTypeData xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:Attribute>
<SAP:Name>interfaceVersion</SAP:Name>
<SAP:Value>3</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>passControlSetValues</SAP:Name>
<SAP:Value>0</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>port</SAP:Name>
<SAP:Value>SAPDES</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>queueing</SAP:Name>
<SAP:Value>0</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>rfcDestination</SAP:Name>
<SAP:Value>IGATE_800</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>sapRelease</SAP:Name>
<SAP:Value>640</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>segmentVersion</SAP:Name>
<SAP:Value />
</SAP:Attribute>
</SAP:AdapterTypeData>
</SAP:ChannelAttributes>
</SAP:ChannelEntry>
</SAP:OutboundBindingEntry>
</SAP:OutboundBinding>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- <!-- ************************************
-->
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.1</Trace>
<Trace level="2" type="T">Host = 192.168.70.65:8000</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.1</Trace>
<Trace level="2" type="T">Remote address = 192.168.70.65</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- <!-- ************************************
-->
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = XI2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-08-07T08:59:28Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- <!-- ************************************
-->
<Trace level="1" type="T">Message-GUID = 087E57E025F311DBAB31001143D6B120</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- <!-- ************************************
-->
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = 087E57E025F311DBAB31001143D6B120</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0008</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0008</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 087E57E025F311DBAB31001143D6B120</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = XI2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-08-07T08:59:28Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-08-07T08:59:28Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2006-08-07T08:59:28Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - SAPIDES</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-08-07T08:59:28Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2006-08-07T08:59:28Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) SAPIDES DEBMAS.DEBMAS03</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: DEBMAS.DEBMAS03</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-08-07T08:59:28Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- <!-- ************************************
-->
<Trace level="1" type="Timestamp">2006-08-07T08:59:28Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- <!-- ************************************
-->
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO3___0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = XI2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-08-07T08:59:28Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-08-07T08:59:28Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2006-08-07T08:59:29Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="1" type="T">Interface Mapping http://filetoidoc/xi ZEP_TO_IDES_IM</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 15340465420C3DA1A9475DA6856A09C7</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping D9FF93C122D711DBA80DE4DEC0A84641</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_ZEP_TO_IDES_MM_</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_ZEP_TO_IDES_MM_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._ZEP_TO_IDES_MM_</Trace>
<Trace level="1" type="T">*** START APPLICATION TRACE ***</Trace>
<Trace level="3" type="T">Document start</Trace>
<Trace level="3" type="T">Start tag [DEBMAS03]</Trace>
<Trace level="3" type="T">Start tag [IDOC]</Trace>
<Trace level="3" type="T">Add attribute: [BEGIN]=[1]</Trace>
<Trace level="3" type="T">Start tag [EDI_DC40]</Trace>
<Trace level="3" type="T">Add attribute: [SEGMENT]=[99]</Trace>
<Trace level="3" type="T">Start tag [TABNAM]</Trace>
<Trace level="3" type="T">Put value [EDI_DC40]</Trace>
<Trace level="3" type="T">Close tag [TABNAM]</Trace>
<Trace level="3" type="T">Start tag [DOCREL]</Trace>
<Trace level="3" type="T">Put value [640]</Trace>
<Trace level="3" type="T">Close tag [DOCREL]</Trace>
<Trace level="3" type="T">Start tag [DIRECT]</Trace>
<Trace level="3" type="T">Put value [2]</Trace>
<Trace level="3" type="T">Close tag [DIRECT]</Trace>
<Trace level="3" type="T">Start tag [IDOCTYP]</Trace>
<Trace level="3" type="T">Put value [DEBMAS03]</Trace>
<Trace level="3" type="T">Close tag [IDOCTYP]</Trace>
<Trace level="3" type="T">Start tag [MESTYP]</Trace>
<Trace level="3" type="T">Put value [DEBMAS]</Trace>
<Trace level="3" type="T">Close tag [MESTYP]</Trace>
<Trace level="3" type="T">Start tag [SNDPOR]</Trace>
<Trace level="3" type="T">Put value [SAPXI2]</Trace>
<Trace level="3" type="T">Close tag [SNDPOR]</Trace>
<Trace level="3" type="T">Start tag [SNDPRT]</Trace>
<Trace level="3" type="T">Put value [LS]</Trace>
<Trace level="3" type="T">Close tag [SNDPRT]</Trace>
<Trace level="3" type="T">Start tag [SNDPRN]</Trace>
<Trace level="3" type="T">Put value [XI2CLNT100]</Trace>
<Trace level="3" type="T">Close tag [SNDPRN]</Trace>
<Trace level="3" type="T">Start tag [RCVPOR]</Trace>
<Trace level="3" type="T">Put value [SAPDES]</Trace>
<Trace level="3" type="T">Close tag [RCVPOR]</Trace>
<Trace level="3" type="T">Start tag [RCVPRT]</Trace>
<Trace level="3" type="T">Put value [LS]</Trace>
<Trace level="3" type="T">Close tag [RCVPRT]</Trace>
<Trace level="3" type="T">Start tag [RCVPRN]</Trace>
<Trace level="3" type="T">Put value [IGATE_800]</Trace>
<Trace level="3" type="T">Close tag [RCVPRN]</Trace>
<Trace level="3" type="T">Close tag [EDI_DC40]</Trace>
<Trace level="3" type="T">Start tag [E1KNA1M]</Trace>
<Trace level="3" type="T">Add attribute: [SEGMENT]=[1]</Trace>
<Trace level="3" type="T">Start tag [MSGFN]</Trace>
<Trace level="3" type="T">Put value [005]</Trace>
<Trace level="3" type="T">Close tag [MSGFN]</Trace>
<Trace level="3" type="T">Start tag [KUNNR]</Trace>
<Trace level="3" type="T">Put value [000000I236]</Trace>
<Trace level="3" type="T">Close tag [KUNNR]</Trace>
<Trace level="3" type="T">Start tag [KTOKD]</Trace>
<Trace level="3" type="T">Put value [0001]</Trace>
<Trace level="1" type="T">*** APPLICATION TRACE TRUNCATED (for more details see LogViewer)***</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_ZEP_TO_IDES_MM_ completed. (executeStep() of com.sap.xi.tf._ZEP_TO_IDES_MM_</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-08-07T08:59:29Z CET End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2006-08-07T08:59:29Z CET Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="1" type="T">processing the outbound binding</Trace>
<Trace level="1" type="T">search outbound bindings</Trace>
<Trace level="2" type="T">search outbound binding for:</Trace>
<Trace level="2" type="T">... sender party =</Trace>
<Trace level="2" type="T">... sender service = FILE_TO_IDOC_BS</Trace>
<Trace level="2" type="T">... receiver party =</Trace>
<Trace level="2" type="T">... receiver service = SAPIDES</Trace>
<Trace level="2" type="T">... receiver interface namespace = urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="2" type="T">... receiver interface name = DEBMAS.DEBMAS03</Trace>
<Trace level="2" type="T">outbound binding found</Trace>
<Trace level="2" type="T">outbound channel is:</Trace>
<Trace level="2" type="T">... party =</Trace>
<Trace level="2" type="T">... service = SAPIDES</Trace>
<Trace level="2" type="T">... name = ZEP_TO_IDES_RCC</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
<Trace level="1" type="T">outbound bindings found</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-08-07T08:59:29Z CET End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="Timestamp">2006-08-07T08:59:29Z CET Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- <!-- ************************************
-->
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Channel for IDOC adapter: IDoc</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = IDOC</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_IDX_IDOC_SERVICE</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">---- Outbound IDoc-Adapter -
</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_IDX_IDOC_SERVICE-ENTER_PLSRV">
<Trace level="1" type="T">Pipeline Service ID: PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="T">Get Information from IS-Header Objekt</Trace>
<Trace level="1" type="T">Get Information from SD-IDoc-Endpoint</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDoc-Endpoint Channel :</Trace>
<Trace level="2" type="T">RFCDEST : IGATE_800</Trace>
<Trace level="2" type="T">Port : SAPDES</Trace>
<Trace level="2" type="T">Docrel :</Trace>
<Trace level="2" type="T">Version : 3</Trace>
<Trace level="2" type="T">Saprel : 640</Trace>
<Trace level="2" type="T">Queue-ID:</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="1" type="T">Get IDoc-XML from the Resource Objekt</Trace>
- <Trace level="1" type="B" name="IDX_XML_TO_IDOC">
<Trace level="1" type="T">Parse XML-BODY</Trace>
<Trace level="1" type="T">Get the Metadata for port SAPDES</Trace>
<Trace level="2" type="T">----
</Trace&g -
Problem with Sender service in File to IDOC scenario
Hello All,
Am doing a file to IDOC scenario.
I have configured the sending system as a party and added a business component, to the BC attached the service interface and also configured the sender Communication channel(CC) as file.
On the receiving end configured the R/3 system from SLD as the business system and configured the receiver CCl. Can see the R/3 logical system in the Adapter specific identifiers at business system.
Pushing the file get an error "Unable to convert the sender service to an ALE Logical System". But choosing "Take sender from Payload" in the receiver CC is resolving the problem, however the sender partner number remains the same as what I have mapped to the control record in message mapping (which is like hard coding).
My questions are:
1. Am I doing the correct config in terms of the scenario. (like using "Take sender from Payload")
2. I tried using identifiers at the party level to convert the sending system, but nothing seems to work. But sending system remains the same as the constant from mapping.
Suggestions would be very much helpful..
--Prashanth
PS: Have gone through many blogs and posts on the forums, but may be I did not see the correct thread. Apologies if I am asking this again.Hi Prashanth,
refer the below discussion i think it will solve your problem.
File To Idoc scenario
Thanks -
Regarding RFC connection in File to IDOC Scenario
Hi everyone,
I was configuring file to Idoc Scenario, i have made all the required configurations in SLD, IR and ID, in XI system and in R/3 System. i have created RFC connection from XI to R/3 system, and its working fine. i have created an Partner profile in WE20 with sender file system name with inbound parameters. <i>But still i am getting error as EDI Partner Profile not defined in WE05- iDOC ADDED WITH ERRORS. </i><b>Do we need to create an RFC connection from R/3 system to XI for file to Idoc Scenario</b>
<b>!!! Note: RFC connection from R/3 system to XI is not working, will this be a problem for file to idoc scenario. !!!</b>
Regards,
Varun Reddy.KHi Varun
Follow these steps
First - Maintain the Sender R/3 System:
SM59 : Create a RFC destination to XI
WE21 : Create a TRFC Port ->Specify the RFC Destination Created
BD54 : Create a Logical System for the Idoc Receiver
WE20 : Create Partner Profile ->Maintain Outbound and the Inbound Parameters
Second - Log on to XI System:
SM59 : RFC Destination for Sender System
IDX1 : Create the port to get Idoc Metadata from Sender System ( The Port Name must match the port name in the idoc header - Usually in format SAP<System ID>. eg. SAPID1 [Optional Step. Not mandatory]
IDX2 : Maintain the Idoc Metadata. This is needed only by XI, and not by other SAP systems. IDX2 is needed because XI needs to construct IDoc-XML from the IDoc. No other SAP system needs to do that.
Regards,
Santosh -
Problem in executing File to IDoc Scenario in XI
Hello,
I am Working in HR Payroll module and new to XI.We are implementing File to IDoc Scenario in XI.When I place the flat file in the application server the file is read but the contents of the flat file is not getting posted to the IDoc.The constant values defined for IDoc in Mapping program is getting posted .I am not able to trace the error.
kindly help me out in resolving this problem.IF there is any way of debugging the entire process please let me know.
Thanks & Regards,
Malathi V.hi,
check this blog to test your mapping,
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Next, check your INBOUND MESSAGE in SXMB_MONI and check if the content conversion has been perfromed as expected.
these steps will help you reason out the cause of your problem.
Regards,
Bhavesh -
I am trying to do FILE TO IDOC scenario, i am getting error called, UNABLE TO CONVERT SENDER SERVICE TO AN ALE LOGICAL SYSTEM.?
could anybody solve this problem?Murali,
You get this error when Adapter specific attributes are missing..
Maintain Adapter Specific Attributes for business system in Integration directory.
Select your business system...Then select Service-->Adpater Specific identifiers.
from right hand window..
Set Logical System ID(of R/3 system), R/3System ID and client.
Let us know if you need more details.
Nilesh -
Message has error status at outbound side File To Idoc Scenario
hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek -
File to IDOC scenario-no messages in SXMB_MONI
Hi all,
I know this is asked so many times ,I checked some links but couldn;t find out the gap where it happened.
I am doing a File to IDOC scenario through XI mapping.
I am not getting any messages in SXMB_MONI.
When I check Communication Channel monitering in Runtime Workbench, it shows processing successfully, then it should generate messages in SXMB_MONI and intimate whether the scenario created is correct or not right!
Please help.
My scenario goes like this:
Sender : Business service(Some file location)
Used File adapter for sender communication channnel.
Receiver : Business system(SAP R/3)
Used IDOC Adapter for receiver communication channel.
One more thing is,do I need to create logical system for Business service also?If so, where do I maintain it?(In SAP R/3 or in XI system?)
Till now,I maintained my XI system as logical system in WE20 and I didn't create any logical system for business service in any system.Does it create main problem?Hi , I am able to poll the files from file location now.and I am receiving IDOC into SAP R/3 with status 56.I already created partner for file path as a logical system and assigned inbound parameters with respective message type . Even the status shows :
An inbound partner profile could not be found with the following key:
/LSDEMO/LS//DEBMAS////
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST test flag
I already manitained following data and there is one record in EDP21.
SNDPRN = LSDEMO
SNDPRT = LS
SNDPFC = LS
MESTYP = DEBMAS
MESCOD = space
MESFCT = space
TEST = space
EVCODE = DEBM
SYNCHK = X
METHOD = space
USRTYP = space
USRLNG = space
INMOD = space
DCART = space
And please let me know whether I have to maintain outbound parameters also for my partner in XI system.I didn't see any difference even I maintained it.
And my IDOC takes another port rather than I mentioned in my SNDPRN(sender port) of my IDOC control record in message mapping.Let me know whether it's mandatory to maintain port name with SAP<XXX>convension,because IDOC in R/3 is picking the port with that naming convension.
Edited by: Jaya on Feb 26, 2010 10:17 AM
Edited by: Jaya on Feb 26, 2010 10:27 AM -
In a file-xi-idoc scenario i created a business service for legacy
system and a business system for R/3 receiver system
i didn't assign logical system for the sender business service
and assigned a logical system for the reciver business system
so while maintaining partner profile in the R/3 system
i have to give partner no:
partner type:
here the problem is my sender business service i didn't assign any logical system,and it is not of LS type
so then what do i need to give in the above two fields?
answers required brieflyHello,
you know this pdf:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
Could be helpful.
Regards
Patrick -
Alert Configuration for File to IDoc scenario
I have followed Alerts : Step-by-Step /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
and configured Alerts for file to IDoc scenario.
But the problem is, I did not notice any alerts being generated. I could notice the IDocs being posted to destination system. So I was going through Alerts-Troubleshoute Guide. In intension to maintain monitoring level, I clicked Configuration tab. But I did not notice my sender and receiver system there to maintain.
Can any body help me to detail out the procedure to add sender and receiver systems to maintain the monitoring level?
Regards,
Suraj Kumarhi Suraj,
WHich SP version are you on??
If you are on Sp14 or above, then unfortunately, Michal's Trouble Shooting for Alerts will not help.
From SP14 onwards, activation of end to end monitoring is not needed for Alerting. Refer to this note <b>870232</b> for this info.
Next, to test if your Alerts have been defined correctly, go to SE38. In the program , type RSALERTTEST and then click on EXECUTE button ( F8 ). In the next window, it will ask you for your ALERTCATEGORY. Just give the name of your ALERT CATEGORY and click EXECUTE.
If you have configured your alerts correctly, you will receive a message that tells ALERT IS GENERATED and will give the ALERT ID.
Now, go to your Run TIme workbench and then select ALERT INBOX and see if you have got the ALERT message in your ALERT INBOX.
If this is working fine, then the last step, implement the note 913858.
Regards,
Bhavesh -
Hi,
I am working on a file to IDoc scenario.The logical name for the sender system is maintained in the SLD.I am not populating the control record in the mapping.
When am executing the scenario, the status message in SXMB_MONI is showing request processed but in the outbound status it is showing error and the message displayed is " EDI Partner Profile not found ".
Can anyone help me out with this.
Thanks and regards,
Pravesh Puria.Hi,
Transaction :WE20
Choose partner Type : LS
Give partner Number ( give Logical System Name ( Sender System ..check with basis or Bd54 Transaction .if the sender is Business Service ..give XI Logical system)
and Inbound parameter add the Idoc and give the process code and save.
ur problem will solve..
let us know if U need any
regards
Ram -
File to IDoc scenario-CREMAS not getting posted
Hi Experts,
i am doing a file to idoc scenario in which i am giving the xml file from MDM ,consisting of Vendor Master data and posting the address and the general data into the ADRMAS and CREMAS idocs into the R/3 system.
The problem that i am facing is that the ARMAS is getting posted correctly but the CREMAS is getting posted with the red signal,status 51.It says "Not authorized to change the Vendor Centrally."
Can anyone please tell me what is the reason and the solution for this problem?
Is this a data error or XI error?
Thanks in advance,
Shweta.Hi Shweta
Status 51, 52 means Posting error
Please check wheteher all the configuration has been done or not
SM59-rfc destination
IDX1-port
IDX2-load metadata
we05-IDoc status records
BD54-Create Partner Number
We20-Create Partner Profile
WE19-Testing IDoc Processing
After That check the solution it is due to Authorization
File to idoc - IDX5 Error
Regards
Abhishek Mahajan
*Please reward points if helpful** -
File to IDOC scenario error...
Hi all,
we hhave created an File to Idoc scenario .
we are getting the following error in SXMB_MONI t-code.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>BUS_SENDER</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service BUS_SENDER to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
can any one plz say wat this error might be..
TIA
Regards,
RajHi,
The problem occurs when sender and receiver business system or business service does not have a logical system name.
ID - Integration Directory
Posting the IDOC'S into SAP R/3 System, sender and receiver business system or business service requires the logical system name. If the business system (Web As ABAP) does not have the logical system name, then add the logical system for business system.
If business system type = Web AS ABAP, then add the Logical system in Technical System level and Save.
If business system type = Third-Party, then add the logical system in business system level and Save.
If the business service does not have the logical system name in ID, it needs to be configured as follows.
Go to ID and click the Business service -> Services -> Adapter Specific Identifiers. Enter the logical system name and Save.
Apply and activate.
hope this will help you.
regards
Aashish Sinha
PS : reward points if helpful
Maybe you are looking for
-
ADF Gantt Chart refresh on drag and drop not working
Hi All, I am using jDev 11.1.1.6. I have a bounded task flow with two page fragments. On the first fragment, I have some filters and on the second fragment I show the Gantt Chart. I have a data change listener associated to it. When I move a task fro
-
It is asking me to restore my phone, won't that wipe out everything I have on my phone?
-
Black lines at top and bottom of quicktime
idvd is adding black lines to the top and bottom of my 4:3 quicktime movies... i wouldn't mind so much except that it is adding more at the top than the bottom and looks funny on a regular t.v. screen... any ideas...?
-
HT5628 No support of Windows 8 for late 2009 iMac?
I have an iMac late 2009, 2,8 GHz and i wonder why Windows 8 is not supported by Apple. After only 3 years no support by Apple. A Mac Pro from 2009 get support, why? Thank you Apple, this was my last computer bought from you.
-
How to get Resultset values to Excel sheet
Hi all, I generated a report ,which do not fit in a page .so I am trying to export entire data to the excel or word document which fits in a A4 size paper.Can any body help in achiving this task by sending code samples . my project can not accomidate