Problems in Installation of 9iAS Application Server

I've downloaded 9iAS Application Server & trying to load on Microsoft Windows 2000 Professional Edition, Intel Pentium III processor, with 256MB RAM.
After clicking to the Setup.Exe, Oracle Universal Installer appears on the screen. Then when I press NEXT, it gets hanged & is not responding.
When I am trying to load another Oracle Universal Installer, it gives
following error message alert:
jrew.exe - Application Error
The instruction at "0x6ee33c57 referenced memory at "0x00000000". The memory
could not be "read".
Click on OK to terminate the program.
Click on CANCEL to debug the program.
Awaiting an early favourable responce.
null

Bidhin,
Abandon any thoughts of installing 1.0.2.2 version from download. Oracle will not support it anyway. I just found this out this morning. The install is suspect anyway as I have had numerous problems, an install of 1.0.2.0.0 works fine.
Hopefully Oracle will pull the 1.0.2.2 version from release as it will not work.
null

Similar Messages

Can i use oracle 8i for oracle 9ias application server ?

can i use oracle 8i for oracle 9ias application server for developing jsp applicationes?
can i run the oracle 8i data application with 9 ias oracle server?
can any one give suggetion?
pullareddy

Hi
Each time when you start your computer, you need to restart Oracle as well, its only with Windows XP. The process you have to follow each time is:
Start -->Run and then type CMD to open command prompt.
In command prompt type
svrmgrl and then press
connect internal/oracle and then press
startup force and then press
If you have any problem, then please email me, [email protected]
Goodluck

Diff between Oracle 9i database and 9ias application server.

Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

Hi,
Your question is the answer. Oracle9i Database manages all your eBusiness data and Oracle9iAS runs all your eBusiness
applications. In a 3 tier architecture, Oracle9i Database fits in the Database tier where as Oracle9iAS fits in the middle
tier. Oracle9iAS provides an infrastructure to run different types of applications(J2EE thru OC4J, Forms applns, Portal
based applns, Wireless applns etc..)
Cheers !
-- Rajesh
Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

Can i use oracle 8i for oracle 9ias application server for developijsp applicationes?

hi,
can i use oracle 8i database for oracle 9ias application server for developing jsp applicationes?
can any one give suggetion?
jpullareddy

If you are using OLite, you should use the OLite .NET provider:
http://download-west.oracle.com/docs/cd/B14156_01/doc/B13788/html/toc.htm
Look at Chapter 6 and 11, which cover ADO.NET data access.

How to run the simple jsp on oracle 9ias application server?

hi,
how to run the simple jsp application jst disply the date on oracle 9ias application server?
can any expline the steps how to do it?
thanks
pullareddy

No, you need the Reports Server (as part of the Application Server or Weblogic, depending on your version).
I try to save the report, it's saved as .jspThat depends. You can save it as a .rdf file too (so called Paper Layout). I think this option is used more often.

Problem while installing java system application server 8.2

Hi
i am trying to install Java System Access Manager 8.2 on LINUX and during this process i am getting the below error.
Valid DNS Domain Name is required.
The DNS Domain name provided could not be validated.
The server being installed require a valid internet name.
Installation cannot proceed until a valid DNS Domain Name is provided.
The above arror is at COMMON SERVER SETTINGS window.
help me out.
varun

Hi,
This is a problem with your DNS settings (or lack of), not with Sun Java System Application Server/Access Manager.
You will need to setup DNS before installing.
One of these articles may help you:
http://www.aboutdebian.com/dns.htm
http://www.troubleshooters.com/linux/dns.htm
http://www.linux.org/docs/ldp/howto/DNS-HOWTO.html
Hope this helps....

Problem while installing the orion application server

Hi
Thanks for help in advance.
I downloaded orion application server 1.5.3 .I followed the installation guide to install the server.When i typed java -jar orion.jar -install in command prompt ,i got following error .
A nonfatal internal JIT (3.10.107(x)) error 'Relocation error: NULL relocation
arget' has occurred in :
'org/apache/crimson/parser/Parser2.maybeComment (Z)Z': Interpreting method.
Please report this error in detail to http://java.sun.com/cgi-bin/bugreport.c
i
Enter an admin password to use:
Confirm admin password:
Installation done
Pls any one tell me how to solve this problem.
With regards
Jyothi

Hi,
This is a problem with your DNS settings (or lack of), not with Sun Java System Application Server/Access Manager.
You will need to setup DNS before installing.
One of these articles may help you:
http://www.aboutdebian.com/dns.htm
http://www.troubleshooters.com/linux/dns.htm
http://www.linux.org/docs/ldp/howto/DNS-HOWTO.html
Hope this helps....

Do I need 9iAS (application server) for IFS?

Hi,
I need some inside gossip on the licensing strategy of IFS.
I've been told that I need 9i Application server license for the DB,
as well as just the database license!
I'm not interested in Oracle Portal, just the existing Windows directory
and the standard web interface.
Can anyone comment on the ludicrous nature of this licensing strategy?
Adeeva
([email protected])

My 5cents to keep this topic hot...
The comment above is quite right, most parts needed from the iAS for iFS are free. 9iAS is based on the Orion J2EE server which also is free as far as I know (http://www.orionserver.com). I heard that Oracle bought the company and build 9iAS upon it, but why does development of Orion obviously go on? Strange...
At least Oracle should release some kind of low-cost 9iAS Light with just the components needed for iFS9R2. Or bundle all necessary components for iFS9R2 with DB9iR2. The need for a complete 9iAS installation is overkill!
It just comes to my mind: if you want to integrate and use iFS9R2 from Oracle 9iAS v2.0 (wireless) portal server, a good installation would be one machine running 9iDB, one running iFS and a third one 9iAS. Would you need 2(!) 9iAS licenses? Because i'm pretty sure installing iFS on the same machine as iAS would kill performance.
+Lutz

Problem in Downloading File from Application Server

Hi All,
We have an Requirement that, iam putting the Flat File
( Output Of a Report ) in to the
Application Server(AL11) By using the OpendataSet, Transer , Close DataSet.
When iam trying to Downloading the Flat File through the FM, GUI_DOWNLOAD, the Data is coming Correctly.
But the Problem is , when trying to Downloading through AL11 i.e System -> List -> Local File it is not coming Correctly.
( Java People is going to Connect with the Application Server for the Flat File )
Kindly Clarify the Problem.
Points will be Rewarded.
Regards,
Kiran.I

Hi nl,
1. this program will display
   selection screen
and ask two things :
a) application server filename
b) local file name
2. then it will download the file
(the file name is CASE Sensitivie)
3. just try it (just copy paste )
*& Report YBCR_FILEDOWNLOAD                                           *
REPORT ybcr_filedownload                       .
DATA
DATA : file_name TYPE string.
DATA : BEGIN OF itab OCCURS 0,
       ln(255) TYPE c,
       END OF itab.
SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : appfn(150) TYPE c LOWER CASE OBLIGATORY.
PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
    IMPORTING
      file_name = p_file.
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
OPEN DATASET appfn FOR INPUT IN TEXT MODE ENCODING DEFAULT .
IF sy-subrc <> 0.
    MESSAGE s999(yhr) WITH 'COULD NOT OPEN FILE ON APP SERVER'.
    LEAVE LIST-PROCESSING.
ENDIF.
DO.
    READ DATASET appfn INTO itab.
    IF sy-subrc = 0.
      APPEND itab.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
file_name = p_file.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
BIN_FILESIZE                    =
      filename                        = file_name
FILETYPE                        = 'ASC'
APPEND                          = ' '
WRITE_FIELD_SEPARATOR           = ' '
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
IMPORTING
FILELENGTH                      =
    TABLES
      data_tab                        = itab
FIELDNAMES                      =
EXCEPTIONS
FILE_WRITE_ERROR                = 1
NO_BATCH                        = 2
GUI_REFUSE_FILETRANSFER         = 3
INVALID_TYPE                    = 4
NO_AUTHORITY                    = 5
UNKNOWN_ERROR                   = 6
HEADER_NOT_ALLOWED              = 7
SEPARATOR_NOT_ALLOWED           = 8
FILESIZE_NOT_ALLOWED            = 9
HEADER_TOO_LONG                 = 10
DP_ERROR_CREATE                 = 11
DP_ERROR_SEND                   = 12
DP_ERROR_WRITE                  = 13
UNKNOWN_DP_ERROR                = 14
ACCESS_DENIED                   = 15
DP_OUT_OF_MEMORY                = 16
DISK_FULL                       = 17
DP_TIMEOUT                      = 18
FILE_NOT_FOUND                  = 19
DATAPROVIDER_EXCEPTION          = 20
CONTROL_FLUSH_ERROR             = 21
OTHERS                          = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
regards,
amit m.

Problem Reading Flat File from Application server

Hi All,
I want to upload a Flat File which is having a Line Length of 3000.
While uploading it to Application server , only upto 555 length it is getting uploaded .
i am using the code :
DATA: BEGIN OF TB_DATA OCCURS 0,
        LINE(3000),
      END OF TB_DATA.
*----Uploading the flat file from the Local drive using FM "UPLOAD".
OPEN DATASET TB_FILENAM-DATA FOR OUTPUT IN TEXT MODE." ENCODING DEFAULT.
IF SY-SUBRC NE 0.
WRITE:/ 'Unable to open file:', TB_FILENAM-DATA.
ELSE.
LOOP AT TB_DATA.
    TRANSFER TB_DATA TO TB_FILENAM-DATA.
ENDLOOP.
ENDIF.
CLOSE DATASET TB_FILENAM-DATA.
What could be the problem?
Could it be due to any Configuration Problem?
Waiting for your replies.
Thanks and Regards.
Suki

Your code looks OK, but you may have touble displaying the full width. Try:
WRITE: /001 TB_FILENAM-DATA+555.
(And don't forget to append your ITAB after each read.)
Rob

Problem in uploading file from Application Server

Hi everyone,
i got a problem in uplaoding a file from application server.i am having two folder (one folder name is current and another one is processed)in application server. In current folder i am having N no of files.I want to upload all the files names into one internal table and i want to process one by one file.After processing each file the file should be moved to processed folder and the files should not exist in current folder.All these process must be done everyday.Please rectify my problem asap.

Ramesh,
Take authorization from basis guy.
Use the below code to get the list of files from require directory
*& Report ZDIRFILES                                                   *
REPORT ZDIRFILES    .
PARAMETER: p_fdir            type pfeflnamel DEFAULT '/usr/sap/tmp'.
data: begin of it_filedir occurs 10.
        include structure salfldir.
data: end of it_filedir.
*START-OF-SELECTION
START-OF-SELECTION.
Get Current Directory Listing for OUT Dir
call function 'RZL_READ_DIR_LOCAL'
       exporting
            name     = p_fdir
       tables
            file_tbl = it_filedir.
Now in internal table "it_filedir" will have all your files.
For moving and deleting
report zrich_0001.
Parameters: d1 type localfile default '/usr/sap/TST/SYS/fld1/Data1.txt',
            d2 type localfile default '/usr/sap/TST/SYS/fld2/Data1.txt'.
data: begin of itab occurs 0,
      rec(20) type c,
      end of itab.
data: wa(20) type c.
start-of-selection.
open dataset d1 for input in text mode.
if sy-subrc = 0.
    do.
      read dataset d1 into wa.
      if sy-subrc <> 0.
        exit.
      endif.
      itab-rec = wa.
      append itab.
    enddo.
endif.
close dataset d1.
open dataset d2 for output in text mode.
loop at itab.
    transfer itab to d2.
endloop.
close dataset d2.
delete dataset d1.
Check below FM if required
To move the file to archive directoryuse FMs 'PFL_COPY_OS_FILE'
To Delete 'EPS_DELETE_FILE'.
Don't forgot to reward if useful

Problem in reading file from application server

while reading the file from application server i am succesful in reading from dataset but the program gets terminated giving a runtime error "CONVT_CODEPAGE".
the code written is as below :
open dataset d1 for input in text mode encoding default.
IF sy-subrc NE 0.
EXIT.
ENDIF.
do.
                Read dataset d1 into btab.
     if sy-subrc <> 0.
     exit.
               else.
               condense btab NO-GAPS.
               wtt_text-text1 = btab-wa+0(10).
               wtt_text-text2 = btab-wa+10(1).
               wtt_text-text3 = btab-wa+11(3).
              append wtt_text.
              clear wtt_text.
              wt_counter = wt_counter + 1.
              ENDIF.
enddo.
write : /10 ' number of records :'.
write : wt_counter.
kindly help me asap.
regards,
rachu.

If I am not wrong you are working on a Unicode enabled system. That is why this error is coming.
Look at the link below, where the solution is provided.
http://help.sap.com/saphelp_nw2004s/helpdata/en/79/c554dcb3dc11d5993800508b6b8b11/content.htm
open dataset DSN in text mode for output encoding utf-8.
Regards,
Ravi
Note - Please close the thread by selecting PROBLEM SOLVED against the answer which helped your most, if the issue is resolved.

Problem with clustering of oracle application server 10.1.3.1

Hi
I have clustered two instances of oracle application server 10.1.3.1 running on solaris.
Instance 1
<notification-server interface="ipv4">
<port local="6100" remote="6200" request="6003"/>
<ssl enabled="true" wallet-file="$ORACLE_HOME/opmn/conf/ssl.wlt/default"/>
     <topology>
          <nodes list="10.x.x.1:6201"/>
     </topology>
</notification-server>
Instance 2
<notification-server interface="ipv4">
<port local="6101" remote="6201" request="6004"/>
<ssl enabled="true" wallet-file="$ORACLE_HOME/opmn/conf/ssl.wlt/default"/>
<topology>
          <nodes list="10.x.x.2:6200"/>
     </topology>
</notification-server>
But when i log on to enterprise manager i get the following message on top of the page:
You have more than one instance of the Application Server Control application running in this cluster. This is not a recommended configuration and could lead to unexpected problems. Please stop the additional instances of Application Server Control or disable routing to these instances.
When i click on one of the instances, i get the session expired error.
what is the problem behind this?
regards,

In the doc, it states that you should only ever have one active instance of application server control running in a cluster at a time -- ASC was not designed to operate as a session sharing application, so your session state is specific to one instance. If for some reason you were directed to the ASC application on the other instance, you get errors.
You can use the OC4J admin_client.jar utility or the opmnctl command to shut down the ascontrol application in one of the instances.
-steve-

BPEL Server installation on JBOSS application Server on SUN SOLARIS

I have a question about Oracle BPEL installation. For our project exists the requirement, to install BPEL Server on SUN SOLARIS, whereby the appropriate Version of Application server JBOSS already exists and it should be used.
The version of the Oracle BPEL server for JBOSS, which we found on the Download side, is made available only with JBOSS (version 3.2.6) in a Package.
During the BPEL server installation this bound JBOSS server version is installed automatically, without giving selection. Is there a BPEL installation for JBOSS on SUN-SOLARIS, which can be installed at the already existing JBOSS server?

Hi There,
Dis you get any good responces to your question ?
Thanks
[email protected]

Problem with open hub with application server

Hello...
I have a problem.
I have bw 7.0 ad im usin Open Hub.
When I configured the open hub in my development environment, In the destination tab i try two options
Option 1.
I use the application server, then i choose my server (the development server).
But when i try to transport I get the follow mistake:
Application sevier sapnwd01 does not exist (sapnwd01 is my development server)
I now I can change the table RSBFILE , or made an abap program.
The problem is, i need to pass the transport withouts errors to quality, because i need to transport to my production server.
And in production server I don't have the permission to change tables.
Option 2.
Using a logical file name (this logical file name, i used for other process and its working correctly)
But when i try to transport I get the follow mistake:
Unpermitted name   for a file .
I hope you can help me!!
Thanks in advance

Hi Sharayu Kumatkar
Sorry for the delay, I had been problems with my access :$
I check the AL11, there are a lot of directories, so I dont know which its the one
My logicla path is ZAPD_INVERSIONES
My phisical path is /netweaver/bw/fuentes/miig/altamira/
My logical path Definition is :
Logical file ZAPD_INVERSIONES2
Physical file ExtraccionInversiones.txt
Data Format ASC
Aplicat. Area FI
Logical Path ZAPD_INVERSIONES
In definition of variable
FILENAME Test.txt
I get this messaje error while Im trying to transport
Start of the after-import method RS_DEST_AFTER_IMPORT for object type(s) DEST (Modo activación)
Unpermitted name   for a file
Thanks to help me!!

Problems in Installation of 9iAS Application Server

Similar Messages

Maybe you are looking for