Problems in installing the content in the ABAP Sneak Preview

Hello All,
Have installed the ABAP Sneak preview and have activated the BW on client 001.  Was also trying to import the content into the BW system.
In the SAINT transaction code, the content package is recognised, but when i try loading this, this fails in the stage CHECK_REQUIREMENTS. Since i have never done this before, was wondering if i am missing out the configuration steps before importing any components or the content.
Are there some steps to configure the transport organiser etc before importing any component or SP or the content into the system ?
Thanks for all the responses,
Best Regards,
Dabre

If you run the install in foreground you will get a lot more information.  In my case it was erroring because the transport system hadn't been configured yet.  Heading into STMS cleared the error for me.
-d

Similar Messages

  • Where can I find an Access key for the user with "AS ABAP sneak preview" ?

    Hi all,
    I have installed AS ABAP sneak preview on my laptop.
    I use username "bcuser" and password "minisap". when I try to create some objects like, i.e. Function Group for Function Module, then it ask for an access key.
    Where can I find an access key for this ABAP SNEAK PREVIEW for user "bcuser"?
    I have gone thru some documents, I know we need to register user in OSS and need to get an access key from the marketplace but can I register this user "bcuser" or it's already register? I need some more specific information to resolve this issue.
    Please advise me on above question.
    Thanks,
    Haresh Solanki

    Hi Rich,
    I have entered ZH_XYZ as a Function Group name to create a new function group. While I am creating it, it asks for the Access Key. I tries to enter an Access Key here for the first time and it says wrong entry for access key.
    Also if I try to create new Function Module, it ask me to select the Function Group. As I couldn't create a new Function Group, I tried to select from existing(from SAP System's FG), still it asks for an access key, I enter the an Access Key here, then also it says wrong entry.
    I really got confused with this Access Key thing, can you provide me some insights?
    Thanks,
    Haresh Solanki

  • Problem in installing SAP NetWeaver 7.0 Java sneak preview on windows xp sp

    Hi
    when I am trying to install SAP NetWeaver 7.0 Java sneak preview on windows xp sp2 I am getting the following problem 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Automatic LiveUpdate scheduler does not exist' after giving the jce file path and i can find the registry entry for the automatic live update scheduler .then what is wrong
    Any inputs are welcome

    Hello Bala,
    Do you have Norton AntiVirus installed? If so then you may need to uninstall it and then proceed with installation. Simple stopping it will not work.
    Regards,
    Vishwas.

  • Problem with Web Dynpro Theme in 2004s ABAP Sneak Preview

    Hi !
    Working on the Web Dynpro for ABAP 2004s Sneak Preview
    I encountered a problem in applying a web Dynpro theme
    via the URL-parameter sap-cssurl.
    I tried the following URL:
    http://hostname:8000/sap/bc/webdynpro/sap/webdynproapp?sap-cssurl=http://hostname:8000/sap/public/bc/ur/nw5/themes/sap_hcb
    But it didn't work ?!
    Could anybody tell me what went wrong ?
    Thanks in advance,
    Frank

    Hi Frank,
    Try this
    1. Set all dynpro's to run with portal theme whether you run them inside/outside portal.
    For this, run visual administrator -> server -> configuration adapter -> (change mode) -> webdynpro -> sap.com -> tcwddispwda -> Propertysheet.default
    set the parameter sap.theme.default to your portal theme path: we've theme CustomerTheme (portal is nw04sr1 sp14) and theme url is as follow:
    /irj/portalapps/com.sap.portaldesign.urdesigndata/themes/portal/CustomerTheme
    2. call individual application with parameter to use portal theme as follow:
    http://<portal hostname with domain>:<port>/webdynpro/dispatcher/local/WD_Project/Applname?sap-cssurl=http://<portal hostname with domain>:<port>/irj/portalapps/com.sap.portal.design.urdesigndata/themes/portal/CompanyTheme
    Hope it helps...
    Lokesh

  • Problem in installing JAVA WAS 6.4 (not sneak preview)

    Hi,
    Struck up at STEP-28 of 33 which is Configure SAP j2ee engine .
    Error log says
    CJS-20067 BatchXmlGenerator error.DIAGNOSIS: Error when
    generating 'Batchconfig.xml' for the batchconfigtool.See output of logfile
    c:\program files\saninst_instdir/batchXmlGen.log:'SAP J2EE Engine Batch Config Xml Generator.
    Anybody faced similar situation ?
    Regards,
    Hemant

    thanks Hernant.
    Turned out to be the fact that the installer switched to user <SID>adm just before this step, and it didn't have enough power.  Added it to local admins and off we went again...
    Andy

  • Not able to access remotely to sap was abap sneak preview (trial version)

    hi all
    i have recently installed sap netweaver 2004s was abap sneak preview which is downloaded from sdn.sap.com. but the problem is i am able to access layout tab from server machine only, not from any other client machine. the layout tab shows that "page can't be displayed" mode of internet explorer. i am using explorer 6.0.
    are there any security settings needed in either of the machines?
    thanks in advance
    shabbir khan

    first of all thanks abhimanyu
    i have one doubt. r u accessing from client machune , or that trial version is installed on ur system it self.
    if ur accessinf from client machine .. u need to do some settings in ur client machine so that it should not hit ur local browser .. where as it has to hit ur servers browser. in my problem.. my client machines are hitting my their own systems browsers . . plz let me know what that setting is
    thanks in advance .. its urgent

  • Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

    Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

    Install iTunes.
    Once install, hold SHIFT and launch iTunes.
    When prompted, point iTunes to the correct location for the iTunesLibrary.itl file which should be in the iTunes folder under <user>/Music on the old drive.

  • I have a problem when you purchase the contents of the game through the My Account

    I have a problem when you purchase the contents of the game through the My Account

    And what is the problem that you are having ? The app was originally bought with that account ? You don't have in-app purchases restricted ? If you are getting an error message then what does it say ?
    If you are also getting a message to contact iTunes Support then you will need to do so (these are user-to-user forums) :
    - go to http://www.apple.com/support/itunes/ww
    - click on your country's flag
    - click on the Contact Support at the bottom of the left-hand column
    - click on Contact iTunes Store Support on the right-hand side of the page
    - then Purchases, Billing & Redemption
    If it's a different problem ... ?

  • I am having problems with mail after upgrading to snow leopard. When I send an email to somebody, I would get a reply from them but the content of the reply were old emails from months ago. Any ideas what's going on?

    For ex. The subject of my email was "List of kids dancing this weekend". Then i would compose my email and send it to the recepient. They responded to my email with the same subject "List of kids dancing this weekend" but the content of the email was the email I received from somebody else months ago. This "phenomenon" happened serveral times already. Please help!

    Check this post out
    http://hints.macworld.com/article.php?story=20110516152604993
    Turns out the auto-complete database is a SQLite DB stored in this folder.  Probably the ownership and/or permissions are messed up on your system.  Mine (under Snow Leopard) show  ownership by me and rw privilege for all files in that directory, including MailRecents....

  • Get the content from the PDF file IN WD ABAP View

    Hi all,
    I have a offline interactive form with data filled in that and save in my desktop. I want to upload the PDF content ( data ) into Web dynpro view.
    Currently i have the view designed with all the input box bound with the respective fields in the context and these fields are same as Adobe form fields.
    I have a UI element to browse and pick the file from the desktop. I have the upload button to upload the data into it.
    When i click the upload button it goes for dump. " No Enough Information for processing or Output"
    *Get the content from the file
      WD_CONTEXT->GET_ATTRIBUTE( EXPORTING NAME = 'PDFSOURCE'  IMPORTING VALUE = CONTENT ).
    In the above statement CONTENT is initial.  Hence dump. I have take this source from SDN Blog.
    Kindly help me where i went wrong.
    Thanks in advance.I

    Hi,
    try my solution (reading dunamic table, but you can read any data from pdf xml) described here:
    Dynamic Table data cannot be Read.
    Regards Jiri

  • Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!

    Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!
    Also, pop up blocker works for some time and then just stops working. I have to close and restart Firefox to get it to work again. Help!

    I had the same problem, but with Firefox 4.0. My first thought was to update Firefox (after of course restarting FF), but that didn't help it and I had the same problem.
    Among others, I had an extension installed and enabled called Tile Tabs 4.10 that I thought could feasibly creating this problem. So I went into my add-ons manager and disabled it, restarted Firefox and the tabs worked properly again. Unfortunately, the Tile Tabs extension is my favorite Firefox add-on and I use it almost every day for managing my web work tasks. I went to the add-on page for Tile Tabs and saw that there was a notice that version 4.10 didn't work properly on Mac OS, and to install version 4.9 of the extension. I saw they had a new, not-yet-reviewed version 4.11 that addressed the Mac OS problem, installed it, and everything seems to be working properly.
    I have no idea why all of a sudden I had this problem, as I hadn't updated Firefox or the Tile Tabs extension recently. Also, obviously this might not address your problem, especially if you don't have that add-on installed and enabled. But our problem started at the same time for both of us it appears based on your post time, so its probably not coincidence.
    But its worth a look, and you might want to check out other extensions if you don't have Tile Tabs that could be causing the problem.

  • Keep getting "itunes cannot read the contents of the iPad" message when connecting my iPad 2 to Windows XP

    Hi all,
        I have an iPad 2 that I purchased in late 2011. I have a Windows XP PC. Of late, I have not been able to connect my iPad 2 to iTunes on my Windows XP (Service Pack 3) desktop. I keep getting the popular error "itunes cannot read the contents of the iPad. .... restore factory settings" message. I have tried re-installing latest iTunes altogether after fully uninstalling and removing registry entries. But it still keeps giving the same message. I have tried all the steps given here - http://support.apple.com/kb/TS1538 , except checking with a different USB cable. My cable however works well while charging. My system however seems to detect the iPad as camera. I desperately need some help to fix this.
    Thanks,
    Paddy

    Worked for an iPad 4 (Retina) running iOS 7.0.3. connected to a Mac (Mavericks, iTunes 11.1.2). Although the file system is a bit different than what is shown on the video, the basic same steps can be carried out: download iFunbox (for Mac, obviously), go into "Raw file system", then "iTunes_Control" (you may want to switch to list view to see the complete name), then iTunes. There there was no iTunesDB file but I deleted iTunesCDB (was 0kB, expect that might have been the problem) and iTunesControl (0kB as well). Also deleted the Music folder in the previous directory.
    After that I disconnected the iPad from iTunes, quit iTunes, relaunched, and it started sync'ing :-)
    Note that now it's telling me that it cannot sync because an additional 10GB is required! Not sure what the problem is because the bar at the bottom of the iTunes window says it still has another 4GB available. I'm expecting there's a problem with how the size of the music is calculated (perhaps because I also sync Genius playlists and mixes), so I disabled music sync'ing for now so it can complete it once. Then I'll hand-pick the music again and hope it works!

  • Itunes cannot read the contents of the iphone

    Problem: iPhone cannot synch with iTunes b/c of the error: "iTunes cannot read the contents of the iPhone "iPhone". Go to the summary tab in iPhone preferences and click Restore to restore this iPhone to factory settings". I have reset the iPhone all possible ways, rebooted, uninstalled/installed iTunes, have double clicked to change name, doesn't synch. I need to get my music and photos back on my device, but I cannot seems to do so. After clicking restore, it blows the device away, then I still get the error. Help?

    I'm have the same problem... just updated to iOS4 on my 3G. Everything synced fine after a few problems with the backup process. The only data that was not transferred was my music to iPod. When I hooked back up to download the music I received the "iTunes cannot read the contents of the iPhone" I have not restored back to the factory settings. Any suggestions... I don't want to lose the data on the phone.

  • DPM 2012 R2 cannot browse the contents of the virtual machine, Error 958, Details: Internal error code 0x80990F4E

    Hi,
    We have a Microsoft System Center 2012 R2 Data Protection Manager Version 4.2.1235.0 as a Guest system on a Hyper-V node. The Hyper-V role is on a Windows Server 2012 R2
    I receive this error message:
    DPM cannot browse the contents of the virtual machine on the protected computer [computername]. Item level recovery is not supported in the following scenarios.
    1. The VHD contains a dynamic disk inside the guest OS.2. The VHD has no volume.
    3. HyperV role is not installed on DPM server.
    4. Automatic mounting of volumes is disabled on the DPM server.
    1) Try enabling automatic mounting of volumes using mountvol on the DPM server to perform item level recovery
    2) Otherwise perform a full restore of the virtual machine.
    ID: 958
    Details: Internal error code: 0x80990F4E
    One of our protected Hyper-V guest systems backup suddenly refuses to browse the content of the VHD file. The system has 2 VHDs. One for the operating system and one for the data. The OS VHD has no problem with content browsing only the data VHDX started
    this error after the installation of september update. I already checked the status that was suggested (1. the vhd contains a dynamic disk... etc. ) and everything is well configured. I have no free space to make a full recovery cause it's 6TB of data. 
    The updates that were installed are:
    DPM Server
    KB2977629
    KB2966828
    KB2988948
    KB2993651
    KB890830
    KB2977765
    KB2894856
    Protected Guest system
    KB2972213
    KB2977629
    KB2894852
    KB2973114
    KB2993651
    KB2988948
    KB890830
    KB2977765
    KB2894856
    Any advice? Thank you in advance for any help.
    Andras

    Hi,
    Does the protected VM have Windows dedup enabled on the volume that cannot be mounted ?
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • I just bought a new Mac Book Pro and did a migration of the content of the old laptop (also a Mac Book Pro) to the new one. Now I cannot start Photoshop CS6. When I am starting it I have a window "Adobe photoshop CS6 extended" opening requesting a connexi

    I just bought a new Mac Book Pro and did a migration of the content of the old laptop (also a Mac Book Pro) to the new one. Now I cannot start Photoshop CS6. When I am starting it I have a window "Adobe photoshop CS6 extended" opening requesting a connexion. When I am entering my password for the connexion the software crashes. How can I fix the problem?

    Migrating, transferring or copying is DEMANDING trouble, not just asking for it.
    Always install from scratch, from the original media,

Maybe you are looking for