Problems in Network in my area

I would like to know if anyone else is having problems with their Verizon home phones? In the last month I have had to report an outage twice for at least 4 days at a time. They tell me it is a problem in the Verizon network. I have never had my landline drop calls like a cell phone. Around the same time my Verizon cell phone service went down hill also. It started dropping calls like crazy. Can anyone tell me what the problem is? I am curious why both would be having problems at the same time.

Of course, I meant a Zyxel modem.

Similar Messages

ISP Problems - All network status LEDs are green, except Internet and Serve

System, Macbook Pro Airport Extreme, D-Link cable Modem.
Randomly I loose the internet. I run Network Diagnosis and it shows green for Airport Airport Settings Network Settings and ISP, but yellow and then eventually red for Internet and Server.
I run the Network Diagnostics and it usually will resolve the issue, but I'm wondering if I should be complaining to my cable company or changing some setting.

For anybody experiencing similar difficulties the solution was the security settings on the wirless router. I had to get Orange to access my Macbook remotley to change from wep to wap2.

Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?

Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden

TS1398 imac connects to internet for a few mins then stops and cannot find any wifi network-other devices are connecting without problems

My imac has suddenly stopped connecting to the internet through my wifi network if I restart the machine it finds the network for a minute or 2 and then stops working and cant find any wifi networks, other devices are connecting with no problems. Any suggestions please

Try posting in the iMac forum. This is the iPod touch forum.

My iphone will no longer connect to my home wifi. it recognises it, but the searching cirlce is constant next to network name. there are three laptops and another iphone on the same wifi that have no issues. i have reset network settings

my iphone will no longer connect to my home wifi. it recognises it, but the searching cirlce is constant next to network name. there are three laptops and another iphone on the same wifi that have no connectivity issues. i have reset the network settings but that did not help. the issue started last week when the second iphone was introduced to the house, could this be the cause?

No.
Any problem connecting your iPhone to any other wi-fi network besides your own?

Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g. I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service". How do I fix it?

Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g. I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service". How do I fix it?
I've contacted o2, tried all of their suggested updates and changes, reset my phone 3 times and still no luck.
Any help appreciated.
Thanks,
Louisa

Hi, l have the same problem, were you able to resolve?

Facing problems with network due which the phone goes into hangs status

Facing problems with network due which the phone goes into hangs status. some one help me with switching between 2g and 3G network

Hi Mani Nair,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are talking about having issues with a 3G cellular data network, you may find the troubleshooting steps outlined in the following article helpful:
iPhone cellular data connection issues
Regards,
- Brenden

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

SAP Screen Personas error "A problem with network connectivity has been detected"

Hi,
We just installed Personas release 100 SP02 and performed the
configuration steps necessary. But when we acces the url and logon to
personas we get the following erre
A problem with network connectivity has been detected.
Please check you connection and refresh your browser.
Any help to solve this issue would be appreciated.
Best Regards.

Please use this checklist to see if everything is correct:
1. restgui service handler class has CL_HTTP_EXT_ITS_BASIC
2. SPRO -> Sap screen Personas -> Maintain system has
       - 3 letter system id
       - "Server.Url" without typo and value in http(s)://<SERVER>:<PORT>/ format
       - "Service.Uri" without typo and value as /restgui
3, Note 2026487 is installed
4. If target system is different from source system then you are able to access the following
         - http(s)://<TARGETSERVER>:<PORT>/clientaccesspolicy.xml
         - http(s)://<TARGETSERVER>:<PORT>/crossdomain.xml
5. role is assigned to user under /n/persos/admin_ui -> User Maintenance -> Search -> Show user -> Role
If you still get error, then if you are using SSO, please check if you have configured login/create_sso2_ticket parameter correctly.
Thanks
Chinthan

Module problems? (Network traffic dies, some devices stop responding)

I searched the forum and the web, but didn't see anything similar to this. I apologize if this has been answered before.
My problem is that my network traffic randomly just stalls. This happens approximately once a day, at a random moment, during load or no load at all. I don't know anything else than reboot that fixes the issue.
Logs contain the following lines, which are inserted at the time when networking dies:
modprobe: FATAL: Module ip_tables not found.
modprobe: FATAL: Module iptable_filter not found.
modprobe: FATAL: Module ip_queue not found.
nf_hook: Verdict = QUEUE.
nf_hook: Verdict = QUEUE.
nf_hook: Verdict = QUEUE.
nf_hook: Verdict = QUEUE. ....
Another thing is that after Arch has been up for few hours, I can't get my memory card reader working unless I remove and reload the module ehci_hcd. The reader always works straight after boot and after reloading ehci_hcd, but will stop working after some time. From log:
ehci_hcd 0000:00:1d.7: port 4 reset error -110
hub 5-0:1.0: hub_port_status failed (err = -32)
hub 5-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?
These messages keep repeating.
Could these two problems be related? And what to do with them?
Last edited by peabrain (2008-04-28 21:36:59)

I dont think these logs are related. One is for the USB subsystem, the other for networking. They are completely different subsystems.
The networking issue is probably the most annoying so focus on that first.
IP_TABLES and IP_QUEUE are modules relating to ip filtering and queueing. I have to ask the obvious - what are your trying to do with your system. These modules are usually used in firewalls, servers, h/w routers etc. If you dont need them, blacklist them in /etc/rc.conf. Blacklist is deprecated "officially" however , for me it works fine in Arch. Just add the ip_tables and ip_queue to the line with BLACKLIST=() on and uncomment it.
Reboot.
If that doesnt work then something is trying to use these modules and hanging your internet IP packets. Without knowing your system and software install, its diffucult to diagnose and because I dont use this functioanlity, I am no expert but I am aware that ISPs use quite large queues and this can be shifted to a linux box.
nf_filter is the NET FILTER module , used to filter IP packets according to predefined criteria. Not sure why you need this, but I think there is some form of queuing in linux, there has to be given packet arrival in non-sync - has to be queued. If net-hook listed as a module, use "lsmod" as root. If its listed, blacklist it like the others.
Other than that, try a later kernel from www.kernel.org, rebuild it but make sure net filtering and queuing options are turned off.
I really dont know. Google !??
Last edited by keratos (2008-04-29 12:26:45)

Procurement Types Problem in network.

Dear Experts,
I am facing a problem in network activities.
Recently we have copied the development server to quality server.
I am now checking the scenarios in Quality server, I have created projected and created network. In network I mentioned the activities, for Act1 I am entering the material requirement in material component view, I mentioned the material numberXXXXXX, quantity 5 and the item category as L, here usually a pop use to come to choose the following options
1. Reserv for netwok
2. Resrv. WBS element
3. PReq + Res - WBS elem
4. Prelim. PReq - WBS elem
5. 3rd Party req. WBS elem.
here we use to choose option 1 or 2 or 3.
Pop up is not coming in Quality server, inspite of that the procurement type is directly taking as Reservation for network.
I have created a project in development server n its working properly there.
I have checked the cutomization settings in Development server and Quality server for material procurement settings, the settings are same in both the servers.
I am worried why the pop up is not coming.
Please help me out in this regard as we are nearing to Go Live.
Thanks and Regards,

Hi Hemant,
Thanks for your reply.
Firstly I havnt understood ur point, I am not maintaing any procurement indicator in network activity, but procurement indicator is maintianed in material master MRP2 view as F external procurement.
But when I enter the material number, qty and item category as L the system immediately taking reservation to network in procurement type field and getting into gray color (uneditable).
Please suggest me on this issue.

Lenovo S90u "Security problem" and network problems

I recently unistalled the security application (lenovo safecenter?) from my lenovo s90u phone. After this every time i turn on the phone there is an annoying message "Security problem" at the bottom left corner and the android "robot" at the top left corner of the screen, Reset to factory didn't solved the problem as also and a lenovo safecenter apk which i downloaded from a link i found here at the "Lenovo S850 security problem" topic. Also there is a serious problem with network connections as wifi and/or data connection are turning on at spear times without my permission. Every time i turn the phone on data connection in on and although i turn it off it turns on again (or the wifi) at spear times.Can you suggest any solution?
‎08-09-2014 03:06 AM

I recently unistalled the security application (lenovo safecenter?) from my lenovo s90u phone. After this every time i turn on the phone there is an annoying message "Security problem" at the bottom left corner and the android "robot" at the top left corner of the screen, Reset to factory didn't solved the problem as also and a lenovo safecenter apk which i downloaded from a link i found here at the "Lenovo S850 security problem" topic. Also there is a serious problem with network connections as wifi and/or data connection are turning on at spear times without my permission. Every time i turn the phone on data connection in on and although i turn it off it turns on again (or the wifi) at spear times.Can you suggest any solution?
‎08-09-2014 03:06 AM

Can't connect computers to printer (b210) via network because there are "other networks"

I can't connect computers to printer (b210) via network because there are "other networks matching your network name". This makes no sense at all. I have several Apple devices (iPhone, iPad, iMac) all with the latest software. The printer works fine when using the USB connection to my iMac. Nothing I do seems to solve this problem (rebooting, re-configuring, etc.). Help.

Hi Cgold,
If there are other networks matching your network name, then the printer will have issues connecting when you run the wireless setup wizard.
However, there are other options:
If your router supports 'Wi-Fi Protected Setup' with either a button to push on the router, or a pin to enter, you can choose that connection option under the wireless menu on your printer.
or
Change the network name that your router is broadcasting within the web page of your router (NOTE-this would force you to re-join all wireless devices back to the new network name you have created).
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Having just upgraded to Ios6 I can not log into my carrier. I get the message "Could not activate cellular data network. You are not subscribed to a cellular data network." What can I do to rectify this?

Having just upgraded my iPad to IOS 6 I can no longer log onto my 3G Carrier. I get thi message "Could not activate cellular data network. You are not subscribed to a cellular data service" what can I do to rectify this?

I reset APN settings from my carrier service site and rebooted but it didn't fix the problem.

HT4623 Could not activate cellular data network. You are not subscribed to a cellular data service" "Cellular Data Plan Usage-There is no data remaining on your current plan. Would you like to add more data now?"what is the best thing i can do with this p

Could not activate cellular data network. You are not subscribed to a cellular data service"
"Cellular Data Plan Usage…There is no data remaining on your current plan. Would you like to add more data now?"what im going to do whit this problem??

I have done that and it is definitely on. My husband has the exact same phone and I upgraded his IOS at the same time, but this problem is not happening to his phone (we are also on the same plan, so our service should be the same). Our settings appear to be identical and my phone is showing the 3G symbol at the top, so I can't understand why it won't access the network.
I've turned it on and off twice and have reset all settings with my iTunes account, but it still isn't working.
I'm not a complete idiot with this sort of stuff - I have tried all the obvious things.

Problems in Network in my area

Similar Messages

Maybe you are looking for