Problems in order to build DarkRadiant editor

Hello gentlemen, I have problems in order to install DarkRadiant From source.
DarkRadiant is the map editor for the Darkmod Project, a modification of Doom3.
The problem is that when I do:
./autogen
./configure
the terminal shows me this:
checking for the toolset name used by Boost for g++... configure: WARNING: could not figure out which toolset name to use for g++
checking boost/regex.hpp usability... yes
checking boost/regex.hpp presence... yes
checking for boost/regex.hpp... yes
checking for the Boost regex library... yes
checking boost/system/error_code.hpp usability... yes
checking boost/system/error_code.hpp presence... yes
checking for boost/system/error_code.hpp... yes
checking for the Boost system library... yes
checking boost/filesystem/path.hpp usability... yes
checking boost/filesystem/path.hpp presence... yes
checking for boost/filesystem/path.hpp... yes
checking for the Boost filesystem library... yes
checking for boost/system/error_code.hpp... (cached) yes
checking for the Boost system library... (cached) yes
checking for python-config... python-config
checking boost/python.hpp usability... yes
checking boost/python.hpp presence... yes
checking for boost/python.hpp... yes
checking for the Boost python library... no
configure: error: cannot find the flags to link with Boost python
And I can't compile it,
I have tried using AUR but it is even worst, the package installs correctly, but when i run the editor:
segmentation fault.

If it built from AUR why do you you think you'd get a different result from building it manually? All that makepkg does is run the commands needed to build it.
That said, if you want to do it yourself, you should look at the PKGBUILD to see which commands are needed. Use autoreconf instead of autogen, modify the configure script, set the environment variables, and pass the right parameters to configure.
Edit: I just built it from the AUR. I got segfaults after it started when it tried to load files that don't exist (/usr/local/game/doom3). This is an upstream bug, report it there.
Last edited by Trilby (2012-09-20 12:28:21)

Similar Messages

Txt output problem,cannot order the output

Hi,
I'm working with forms and reports 6i, and I have a problem when generating the .txt output.
My report consists in some columns (database-scalar) from the main query and in some columns(formula).
What I'm trying to do is to mix the order of columns (database-scalar) and columns(formula),but
I can't do it. The columns(formula) are always in the end of the output...
I've put the right order in the report editor,but It only works to put the order of the columns (database-scalar) .
Example
query
select a,b,c from..where...
formula colum: desc_a,desc_b
The desired output
a desc_a b desc_b c
The output I get
a b c desc_a desc_b
Thanks in advance

Solved,reading anothers posts found the error.
Just need to play with the "break order" and separating in groups the formula column and the database-scalar colum.

"Unembolden" keywords in Flex Builder 3 Editor

Is there anyway to remove the bold attribute from keywords
& string literals in the Flex Builder 3 editor?
In v2, I was able to tweak an xml file in a jar - I can't
find it in the new version.
It is quite troublesome as I like to line up similar lines of
declarative code vertically in order to reduce visual clutter.
As they are wider than normal ones, the bold characters
disturb the mono-spaced layout and foil this effort.
Thanks,
JP

Hi,
It'd be great if you could provide these kind of bugs and
enhancement requests over at the new public bug system!
http://bugs.adobe.com/flex.
Matt
Adobe

Problem in order by in forms

hi guys
i m having a problem in ordering by in a detail block .
actually i have a dummy block on whose basis records are populated in a detail block the
when_button_press has
go_block('x');
execute_query;
there is a where clause in the block level and no order by clause.
althogh the query which is generated by forms when run on sql gives me the desired result but not in the forms.
also for elaboration the ordering is to be done on the basis of another table which stores the display order for the records so when I tried using both tables in the forms block QUERRY DATA SOURCE NAME and joined the 2 table in the where and order by caluse of the block level and the column source at the field level was given table_name.column_name but the query build by the form inclued the rrowid for the table whICH i CAN NOT alias so there was a problem in the query genetration and hence the result
please tell me what is the problem here...
thankx
dg

ok guys dont scratch ur heads the problem has been solved
thankx anyway
dg

Error in invoking the build rule editor, LabView 2011

Hi all. I'm having a problem in Project Explorer. When I right-click on 'Build Specifications' and select New:Application (EXE), I get the following error dialog:
"There was an error in invoking the build rule editor. Please check the corresponding provider directory to see if any VIs are broken."
After this appears, no build specification is created.
I built this application in LabView 2010 on WinXP and was able to compile and run it sucessfully many times over the last few weeks.
The problem started yesterday when I had a problem with a Ring control. I right-clicked it and selected "Edit items" or "Properties" the cursor blinked for a moment but the dialog box did not appear. I removed the Ring control and replaced it with a String control, then when I tried to build the application, I got this error message. At that time, I also noticed that I could not get a Properties dialog box to appear for any controls or indicators.
Yesterday, I installed NI Developer Suite 2011 Version DS2. This seems to have fixed the problem with the dialog boxes and I was able to use the Ring control. However, I still have the problem with the build rule editor.
To determine if there was a problem in my program, I built a new 'Hello World' .vi with just a string control and string indicator. This program has the same problem when trying to build to an .exe.
Currently, I am trying to remove all previous versions of LabView. When that is done, I will reboot and try to build again. If that doesn't work, I will remove ALL National Instruments software and re-install NI Developer Suite 2011 DS2.
I'm hoping someone can provide a solution before it comes to that.
Two other facts which might be relevant: I don't have Administrator on this machine, although I could probably get it if I could make a strong case. Also, I can't be sure, but I think the problem may have started when I undocked my laptop from the docking station to go to a meeting.
I appreciate your help. Thanks in advance.

If you need additional assistance, I encourage you to create a new thread. It is more likely to be answered by other users as a fresh post.
The most likely cause is a corrupted file (or files) in the builder directory.
I would recommend renaming/moving the following folders and performing a repair install of LabVIEW:
\National Instruments\LabVIEW 2011\vi.lib\AppBuilder
\National Instruments\LabVIEW 2011\resource
Regards,
AnjelicaW.
Regards,
Anjelica W.
National Instruments
Applications Engineer

Problem with order in iPhoto

problem with order in iPhoto. I can't buy a card, because there comes an Message "Ihre Karte enthält offenbar Standardtext, der noch nicht bearbeitet wurde. Gedruckte Karten enthalten diesen Text nicht. Möchten Sie fortfahren?" What should I do?

That message means that you have text boxes that have not been used. The holding text that appears in the box will not be printed. But if you want to get rid of the warning just put a space in the text box.
OR, check to see if the card layout has the same page but without a text box. Most do.
OT

Problems submitting order via iphoto

Hi,
I have a problem placing orders with iphoto. Ordering procedure ok till sending files. Then nothing happens. Internet, email, itunes, account everything ok. security - firewall ok. husband is having same comp. and no problems with his or my account when ordering prints, calendars or books. on my computer its seems impossible. ilife 08 already removed and reinstalled, problem stays the same. helpdesk till now unable to help me.
I hope some one can help me, and if possible ASAP
Thanks

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
Regards
TD

Problem in creating a build.xml for weblogic portal application

Team ,
I am facing problem in creating the build.xml using weblogic.BuildXMLGEN tool .
a) Below is the structure of my portal application
SrcCode
--- .metadata (eclipse plugins folder)
--- B2BApp ( Ear Content)
--- b2bPortal ( portal related file(controllers,jsp)
--- b2bsrc (java src)
b) Now I executed below utility to generate the build.xml "
java weblogic.BuildXMLGen -projectName B2BApp -username weblogic -file build.xml -password welcome1 F:\srcCode"
c) Based on the above step , build.xml got generated .
d) when I execute "ant compile" target from the command prompt , I see the below exception
ant compile
Buildfile: build.xml
compile:
+[wlcompile] [JAM] Warning: failed to resolve class AbstractJspBacking+
+[wlcompile] [JAM] Error: unexpected exception thrown:+
+[wlcompile] com.bea.util.jam.internal.javadoc.JavadocParsingException: Parsing failure in F:\b2bNew\b2bPortal\src\portlets\b2b\dmr\Picker\PickerController.java at line 58.+
e) I suspect , the problem is bcoz of classpath issues , as I generated build.xml donot have the references to dependent lib's.As build.xml looks like below :
+<target name="compile" description="Only compiles B2BApp application, no appc">+
+<wlcompile srcdir="${src.dir}" destdir="${dest.dir}">+
++
++
++
+.....+
+....+
Please help me to reslove these issues .
PS: I able to deploy the application using 10.3.2 weblogic workshop ( i.e inbuilt eclipse )

i JaySen ,
thanks for your response. As mentioned we added all the necessary library within the -librarydir but still we see the same error :
+[JAM] Error: unexpected exception thrown:+
com.bea.util.jam.internal.javadoc.JavadocParsingException: Parsing failure in F:\b2bNew\b2bPortal\src\portlets\typeAhead\TypeAheadController.java at line 70. Most likely, an annotation is declared whose type has not been imported.
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.getAnnotationTypeFor(JavadocTigerDelegateImpl_150.java:410)
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.extractAnnotations(JavadocTigerDelegateImpl_150.java:176)
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.extractAnnotations(JavadocTigerDelegateImpl_150.java:152)
at com.bea.util.jam.internal.javadoc.JavadocClassBuilder.addAnnotations(JavadocClassBuilder.java:404)
at com.bea.util.jam.internal.javadoc.JavadocClassBuilder.populate(JavadocClassBuilder.java:359)
===================
a) this is a upgrade project [ upgrading from wlp 8.1.4 to 10.3.2 ]
i.e we are using weblogic portal 10.3.2 version.
b) Searched some sites/forums regarding the above error, and it says something related to "jwsc" ant task [ i.e while compiling a webservice(JWS) ], but we see this error while compiling a normal controller(jpf) class :(
c) we are using "ant compile" target which internally calls wlcompile task , while executing wlcompile this error is thrown .
Help Appreciated
Thx,
Sarat

Problem Using Aperture as an External Editor

I'm having a problem using Aperture as an external editor for iPhoto. I've set preferences to "Edit in Aperture" and selected the Aperture application. When I click edit a photo in iPhoto, Aperture fires up as expected, but it does not load my photo. Nothing seems to be exported from iPhoto into Aperture.
I can export the same photo to my desktop and then load it into Aperture fine.
When I set preferences to edit in CS2, this works fine, only Aperture seems to be the problem.
What am I doing wrong?
I'm using the following versions:
- iPhoto 7.0.2
- Aperture 1.5.4

If you have Photoshop CS2 then you'd have a better editor using it within iPhoto as follows:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Hi, I have problems in ordering book from iPhoto. It says "problems in getting contact with Apple Online Store" I have changed password on my Apple ID - could that be the problem ??

Hi, I have problems in ordering book from iPhoto. It says "problems in getting contact with Apple Online Store" I have changed password on my Apple ID - could that be the problem ??

Some additional efforts you can try:
Go to the System/Sharing preference pane and make sure Remote Apple Events is checked.
If it is, uncheck it and then recheck and try ordering again.
OT

Problems with 'Order Prints' from Aperture 2.1.3 Mystery borders

*Some background:*
I've been using Aperture for about 3 months now, importing most of my iPhoto library into the program. I have only recently started shooting in RAW format, most of my photos image files are in JPG format. In the past, I've had no problems with obtaining prints from within iPhoto or to a limited extent Aperture. So, far as I know my program is up-to-date. I have 2 plugins installed: Aperture2twitter and *flickr export Lite* both of which work acceptably.
*The problem:* I ordered 317 4×6 prints from my aperture library.
Every photo has a 1/4″ border on both sides of the image, i.e. the printed image is only 4×5 1/2″. I have never ordered this quantity before, but I don’t believe that was the problem, it appears that the processing machine was misaligned and no one reviewed the prints prior to shipping.
I tried again, on 4 different images ... all JPG files with 3 out of 4 were OK, but one exhibited the "border" issue.
I haven't a clue what is going on here. Apple implied +(via email)+ that I would have to individually crop every photo to ensure proper aspect ratio. This makes no sense to me at all, as I have never had this kinda problem before.
Could the plugin(s) be interfering with the s/w? Is there a trick to having photos printed from within Aperture that was not present in iPhoto?
Any thoughts on what the problem is would be greatly appreciated.
Thanks
-john

I believe that I've solved this problem, with the help of the folks at Apple who handle Aperture tech support using the Aperture support ID that came with the product.
So the short answer is: Aperture print services REALLY DO REQUIRE the image to be cropped (constrained as they say) prior to the data being sent to Apple Print services.
Here is the link that describes cropping http://support.apple.com/kb/HT1993?viewlocale=en_US
The process as described is cumbersome, but the support tech pointed out that in Aperture, crops are 'non-destrutive' and can be undone simply by removing the check mark on the Adjustments tab of the image you crop. *This means that you do not have to make a duplicate image for cropping.*
So, here is the process that I arrived at to ensure that my "order prints" job turned out:
1. create an album of all the photos you want to submit for printing.
2. for each image call up the Crop HUD by pressing 'c' on the keyboard.
3.select the aspect ratio that you want for your photo. Make sure that it does NOT SAY Master Aspect Ratio, or Main Display Aspect Ratio.
4. Crop the photo
on the adjustments tab you can see the X and Y data and Height / Width information which can be undone.
5. Submit your print request to Apple for all the cropped photos.
When the prints arrive, you can compare the prints with the submitted photos. They should all be good. You can then delete the album (since it really is not a physical thing) or keep it for reference.
It all seemed a bit arcane to me, as I never had to worry about this in iPhoto. It must be that iPhoto sends different data than Aperture. I have just received 200 + prints back from Apple Print Services with about 98% success rate. I just have to adjust my thinking and my process when dealing with Aperture.

Problem with order by clause

Hai all,
I have problem with order by clause,
My query is
"select number from table1 order by number asc "
and the output is displaying as
1
10
12
13
15
17
19
2
20
21
22
But if we give order by it should display as below only right ?
1
2
10
12
13
15
17
19
20
21
22 ........
Please help me why it is not displaying like it. and how to make the statement to display like the second case. Thanks in advance.
Regards,
Uraja

The column datatype that you are selecting is not of NUMBER datatype(might be char or varchar2) hence you are getting such result set.
And for this purpose, it is recommended to set datatype of a column appropriately.
For now you can add TO_NUMBER function to column in ORDER BY clause, only if it has data of number type.
Edited by: Ora on 19 Nov, 2012 3:10 AM

Problem in accessing integration builder tool of XI

Hi
i am having problem in accessing integration builder tool of XI system , when i enter the user credentials it is getting hanged
can any body please help me with this
thanks and regards
Pendyala

Hi,
check whether your xi server is working fine or is it down. If you are not able to open the integration builder, what is the exact error message you are getting.
How are you trying to open your IB.
Are you able to login to SAPGUI for the XI client.
If so try to provide the tcode sxmb_ifr and check whether you are able to open the IB.
Reward points
Regards,
Nithiyanandam

Problem with order data

Hi, I have a problem with order data. A string column has these values:
A....
B....
PSTA-FRA
PSTA+FRA
Q....
R....
If i order data directly from db ( select column1 from table order by column1 ) , i obtain this result:
PSTA-FRA
PSTA+FRA
If i create a simple report on that table and order on that column the result is:
PSTA+FRA
PSTA-FRA
I can obtain correct output if I set parameter 'Perform group on server' but if i write a selection formula :
{table.column} >= 'PSTA+FRA'
record containing PSTA-FRA value not appear.
I've tried both with Crytal 8.5 and Crystal 11 R2 sp6, database is Sybase SQL Anywhere odbc connection.
Thanks in advance

Ordering is done according to the ASCII values of the characters.
In R2 create a new report and log onto your DB and select Command for your data source. Paste in the SQL you use to get the data in the order the server users. Then you don't have to use CR to do the sorting. DB Servers are much more efficient at collecting the data than CR is.
Thank you
Don

[svn:fx-trunk] 12722: add framework. swc in the external lib path in order to build a proper bundle

Revision: 12722
Revision: 12722
Author:   [email protected]
Date:     2009-12-09 09:28:36 -0800 (Wed, 09 Dec 2009)
Log Message:
add framework.swc in the external lib path in order to build a proper bundle
QE notes: no
Doc notes: no
Bugs: no
Reviewer: no
Tests run: ct
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/textLayout/build.xml

Thats good news.

Problems in order to build DarkRadiant editor

Similar Messages

Maybe you are looking for