Problems in the installation of the Oracle 8iR2

Hi all,
Why are all of the charecters on universal installer un-readible ? The version of Oracle8i is 8.1.6. I have set up ALL the environment variables in .bsh_profile file, according to the installation guide.
I use Red Hat V6.0 with CLE(Chinese Language Extensions) installed. I tryed to install Oracle8i on English KDE mode, but the problem is still the same.
null

tar zxvf the ftp'd file into a temporary directory & run it from there.

Similar Messages

Problems with the installation of the Oracle 8i in Red Hat 6.1

It has some days I come trying to install the Oracle (Oracle 8i) in an operational system Linux Red Hat 6.1 and come finding problems, that did not obtain to determine correctly are of the Virtual Java Machine or in runIns.sh of the Oracle.
I go to give a detailed description of the error and mainly of runIns.sh for who it knows vocjs to help me in this arduous task that became the installation of oracle.
The installation of the Virtual Java Machine as well as the one of the Oracle followed the procedures told in the Leiame.Oracle being carried through with the user root.
All the installation process is being carried through with an user of the called system oracle8i pertaining to the primary group oinstall and the suplemental group dba.
When I enter with the following string of command I receive the error below:
$ ./runInstaller
Initializing Java Virtual Machine from /usr/local/jre/bin/jre. Please
wait...
Error in CreateOUIProcess(): -1
: invalid address
The archive runInstall.sh before I discovered this group if found in the following way.
/usr/local/jre/bin/jre -ss4m -oss4m -ms32m -mx64mb -Doracle.installer.nlsEnabled=TRUE -Doracle.installer.startup_location=. -Doracle.installer.library_loc=../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/bin/linux -cp ../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/InstImages.jar:../../stage/Components/oracle/swd/.oui/1.6.0.7.0/1/DataFiles/Expanded/lib/xmlparser.jar:./ru nimage/lib/OraInstaller.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/ewt.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/li b/help.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/InstHelp.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/oracleice. jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/OraInstaller.jar:/tmp/orainstall: -nojit oracle.sysman.oii.oiic.OiicInstaller -scratchPath /tmp/orainstall -sourceLoc "../../stage/products.jar" -sourceType network $1 $2 $3
Soon after with a message placed here I moved for the following format, that is with which remains now.
/usr/local/jre/bin/jre -ss4m -oss4m -ms32m -mx100mb -Doracle.installer.nlsEnabled=TRUE -Doracle.installer.startup_location=. -Doracle.installer.library_loc=../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/bin/linux -cp ../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/InstImages.jar:../../stage/Components/oracle/swd/.oui/1.6.0.7.0/1/DataFiles/Expanded/lib/xmlparser.jar:./ru nimage/lib/OraInstaller.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/ewt.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/li b/help.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/InstHelp.jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/oracleice. jar:../../stage/Components/oracle/swd/oui/1.6.0.7.0/1/DataFiles/Expanded/lib/OraInstaller.jar:/tmp/orainstall: -nojit oracle.sysman.oii.oiic.OiicInstaller -scratchPath /tmp/orainstall -sourceLoc "../../stage/products.jar" -sourceType network $1 $2 $3
They forgive for the exaggerated size of the question, but already I placed this question in other groups of discugco as well as for the Oracle bed and I did not get reply.
I anticipate Gratefulness.
Sebastico Carlos Santos
Universidade Federal de Uberlbndia
Uberlbndia, Minas Gerais, Brasil

I had this problem the best thing to do is make sure you have the Blackdown.org JDK116_v5 for Linux installed. Then:
JAVA_HOME=/somedirectory/jdk116_v5
export JAVA_HOME
This fixed the problem for me and I was able to run runIns.sh.

Hello I have a problem since my installation of the Yosemite update on my Mac I can longer open Indesign CS6

Hello
Hello I have a problem since my installation of the Yosemite update on my Mac I can longer open Indesign CS6.
I have a problem since my installation of the Yosemite update on my Mac I can more open Indesign yet I have installed JavaForOSX2014-001 but it has changed nothing someone could help me?

Please do not post the same question multiple times. If someone can help you, they will, but you need to be patient -- we're all just volunteers, users like yourself. I'm going to delete your other posts.

Problems installing OS I have an iMac 21.5 (Mid-2010) and in trying to load a new hard drive, after choosing the installation disk the apple logo comes up and then stops and the keyboard and mouse goes dead. Any help would be appreciated. Thanks

Problems installing OS
I have an iMac 21.5 (mid-2010) and I'm trying to install a new hard drive. When I choose the installation disk the Apple logo comes up and it stops there. Then the mouse and keyboard goes dead. I'm trying to install 10.6. Any help would be appreciated. Thanks

Since you have a new hard drive, there is nothing on it, so you need to boot from an external source (and probably format the hard drive before installing an OS). Are you booting from the 10.6 install disk? Better yet - do you have a bootable backup clone or at least a Time Machine backup?

What are the installation steps for Oracle Fusion HCM

Hi all
I will like to ask, what are the installation steps for Oracle Fusion HCM as well as can it work on Windows or only on virtual machine?
Thanks

If you're looking to install Fusion HCM, your best bet is to install on linux, eg, Oracle Enterprise Linux. It's up to you whether you put that in a Virtual Machine or not. I don't think Windows is an available platform for Fusion Apps at the moment, although am prepared to be corrected if you find anything to the contrary!
If you're looking to do an install on your own PC/laptop, you're probably out of luck - you'll be needing around 128GB of RAM. Check out this post:
http://onlineappsdba.com/index.php/2011/11/02/fusion-applications-128-gb-memory-and-500-gb-disk-space-are-you-ready/
Atul has also posted some good stuff on installing:
http://onlineappsdba.com/index.php/2011/06/15/install-oracle-fusion-applications-in-10-steps/

Error at the installation of the CR Runtime package V13.01/V13.02 - reg key

Hello,
we got an error at the installation of the cr runtime package. We have try both
installation packages(msi) 13.01 and 13.02. But it's the same error.
We want to install this package automaticly on our computers. On 8 of 10 computers was the instalation successfully.
On the remaining 2 computers we got the following error.
MSI (s) (68:9C) [16:30:41:790]: Product: SAP Crystal Reports runtime engine for .NET Framework 4 (32-bit) -- Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0
Crystal Reports. System error 87. Verify that you have sufficient access to that key, or contact your support personnel. <<--- see below
Executing op: RegAddValue(Name=svcmgr,Value=0,)
MSI (s) (68:9C) [16:30:41:775]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Crystal Reports\templates,,BinaryType=0,)
MSI (s) (68:9C) [16:30:41:775]: Executing op: RegAddValue(Name=templatepath,Value=C:\Programme\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\Crystal Reports 2011\/Templates,)
MSI (s) (68:9C) [16:30:41:775]: Executing op: RegAddValue(Name=templatesearchmask,Value=*.rpt,)
MSI (s) (68:9C) [16:30:41:775]: Executing op: RegAddValue(Name=templatefileextension,Value=rpt,)
MSI (s) (68:9C) [16:30:41:790]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Crystal Reports\DatabaseOptions,,BinaryType=0,)
MSI (s) (68:9C) [16:30:41:790]: Executing op: RegAddValue(Name=MergeConnectionProperties,Value=no,)
MSI (s) (68:9C) [16:30:41:790]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\\Crystal Reports,,BinaryType=0,)
MSI (s) (68:9C) [16:30:41:790]: Executing op: RegAddValue(Name=CommonFiles,Value=C:\Programme\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\,)
MSI (s) (68:9C) [16:30:41:790]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\\Crystal Reports 3: 87
MSI (s) (68:9C) [16:30:41:790]: Product: SAP Crystal Reports runtime engine for .NET Framework 4 (32-bit) -- Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\\Crystal Reports. System error 87. Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\\Crystal Reports. System error 87. Verify that you have sufficient access to that key, or contact your support personnel.
MSI (s) (68:9C) [16:30:41:790]: User policy value 'DisableRollback' is 0
Our it team have an idea. They think that the problem is the double \ at the end of the reg key path. You can find this if you search
in the code above.
Can you check this or have you an other idea to solve the problem.
best regards
Dennis Hoyer
- IT consultant (.net development)

Hi,
See if below article helps,
[1535811 - Error 1402 when installing Crystal Reports for Visual Studio 2010 runtime via the msi file |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333833313331%7D.do]
- Bhushan.

What can I do to recover data from my iPhone 4s? The phone fail to come on again after the installation of the new iOS8. The phone is locked and I didn't make any backup before the updating installation. Inside I have very important info.

I Have problems with my iPhone 4s after the installation of the new iOS8, the phone doesn't want to switch on again. I need to recover some important data that I have inside the phone.

Ralph Landry1 wrote:
There isn't anything you can do to recover contents from iPhone 4s if you cannot get the iPhone to startup. Connect it to a wall outlet so you have a solid power source, then do a reboot by holding both the power and home buttons until the apple logo appears, ignoring the red slider if that appears. If the iPhone still will not startup, the next options to try will automatically erase your iPhone all of its contents.
The next step is to do a restore via the recovery mode as described in http://support.apple.com/kb/HT1808 but again note that this erases the iPhone.
Thank you Landry, it is really a good experience to solve problem of iPhone Data Recovery!

IMessage doesn't work after the installation of the update 5.1

iMessage doesn't work after the installation of the update 5.1

I am unsure whether my issue relates to updating to OS5.1 but seems coincidental that I have only had the problem for the last few days since updating.
I can use iMessage without a problem although some messages are delayed in being sent or received recently. However, I can no longer send MMS picture messages. I have spoken to my provider who has been through all their relevant settings checks. I have restarted the phone (iPhone 3GS), I have tried turning off iMessage to send MMS but still nothing works.
I've had no issue sending MMS picture messages since owning the phone right up until a few days ago.
Has anyone else experienced this or does anyone have any suggestions on anything else I can try please?
Thanks
Jo

I received a pop up regarding security certificates when opening a PDF document today. Is it safe to say "yes" to the installation of the security updates?

I received a pop up regarding security certificates when opening a PDF document today. Is it safe to say "yes" to the installation of the security updates?

If you opened it with Adobe Reader, then yes: "Yes" is safe (I just did the same thing one minute ago).

It is possible to include the jre(not the installer) with the application?

Is it possible to include the jre(not the installer) with the application, so that the application will run on its own jre.??
If so please provide me instructions,how to do it.
Thanks
Isma

See http://java.sun.com/javase/6/docs/technotes/guides/deployment/index.html

I have iphone4. I tried 2 update some applicaStions when I was in USA, updates installation were not complete. Coming back 2 my country Egypt, I am unable to complete the installation of the update; it is still waiting. Is there a way other application ?

I have iphone4. I tried 2 update some applications when I was in USA, updates installation were not complete. Coming back 2 my country Egypt, I am unable to complete the installation of the update; it is still waiting. Is there a way 2 complete installation other than deleting the application that contains important data?

I have iphone4. I tried 2 update some applications when I was in USA, updates installation were not complete. Coming back 2 my country Egypt, I am unable to complete the installation of the update; it is still waiting. Is there a way 2 complete installation other than deleting the application that contains important data?

The installation of the new system caused the heating equipment and also heating the charger that tease your burning it. and only now discovered that the source of this 60w no longer being sold in BRAZIL had to buy a power 85w.

The installation of the new system caused the heating equipment and also warming the bellman who tease her and burning so now discovered that the source of this 60w no longer being sold in BRAZIL had to buy a power 85w.

The installation of the new system caused the heating equipment and also warming the bellman who tease her and burning so now discovered that the source of this 60w no longer being sold in BRAZIL had to buy a power 85w.

Imessage doesn't work after the installation of the update 6.0

imessage doesn't work after the installation of the update 6.0

iMessage will not work until it's activated.
Switch iMessage OFF. Double tap Home button and delete Messages in multitask-bar.
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.
Switch iMessage back ON.

Black screen after the installation of the graphics driver

Hello,
- Recently I bought a 'GT 610' graphics card to replace the old broken one,
- after the assembly one short beep was audible during system reboot (=OK),
- a default windows graphics driver was installed by Windows Vista,
- screen resolution manually set at native screen resolution (1280 x 1024),
- (youtube movies as well as flash player worked fine),
- the installation of the (most recent) nVidia driver went smoothly (the old driver on CD did not!),
- after the nVidia driver installation the system restarted itself to activate the driver.
So far so good.
- Unfortunately after rebooting the screen got black and remained black,
- no log-in screen, only the typical Windows start-up screen with the green progression bars was temporarily visible,
- in safe mode I had to disable the nVidia driver to restart Windows in normal mode.
- At this moment I can use my computer for desktop application like MS Office, email or internet browsing, not for video editing or gaming.
Question: How to enable the nVidia driver to use the graphics card's full capacity?
Thanks.

- Yes, the GT610 is a genuine MSI product bought in the local computer store.
- I suppose my board (Vendor = Micro-Star International Co., Ltd --> also MSI) is an OEM product. I don't have any hard evidence, but on the internet I've found some independent threads claiming the MS-7318 is an OEM product indeed.
- Both VGA cards (nVidia GeForce 6700XL/7650GS based) are Medion products. They have their own Medion drivers. Nevertheless in the past latest downloaded nVidia drivers seemed to work fine when installing them on these Medion PC's.
- MS Windows XP SP2 on the provided recovery DVD is a Medion OEM product for sure.
- My Computer model = Medion Akoya MD 8818
- Test computer = Medion Akoya MD 8818 (same board, same PSU, same graphics card, same ...) --> But a few months ago, the original graphics card of this test PC also crashed and had to be replaced!! Weak cards these 7650GS. So, the 6700XL is a replacement for the original Medion GeForce 7650 GS in the test PC. Fortunately I could use the graphics card (6700XL) of a 1 year older Medion Akoya MD 8800 PC. This card works fine.

HI,Have 10.10.3 version email system does not work at all it display emails up to the installation of the new version, no incoming or outgoing emails

HI,
Have 10.10.3 imac version- email system does not work at all it display emails up to the installation of the new version, no incoming or outgoing emails

That helped thanks-
I was able to solve this by deleting all "Envelop Index*"- and "ExternalUpdates*"-files in ~/Library/Mail/v2/MailData. After that I restarted Mail and let it reindex all mailboxes.

Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing.

Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing :
To fix this I have to deinstall all components of Apple Software in exact order as you reveal on your web site. Than reinstall iTunes from Scratch.
I am using Windos 7 64 bit Professional German edition.

Hi,
to see the cause of Windows 8 update failures, we must look for error messages in the following log files:
Please run the Windows Explorer and go to the folder "C:\Windows\Logs\CBS\" and copy all files to your document folder, also copy the setupapi.dev.log from the folder C:\Windows\Inf, the "C:\Windows\WindowsUpdate.log" and the file "C:\Windows\winsxs\poqexec.log"
to your document folder (otherwise you can't upload it), zip all files into 1 ZIP and upload the zip to your SkyDrive [1] and post a link here.
André
[1] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
"A programmer is just a tool which converts caffeine into code"

Problems in the installation of the Oracle 8iR2

Similar Messages

Maybe you are looking for