Problems in the installation the sneak preview sap NetWeaver 04s-full ABAP
hello to all!!!!!!!
I have problems in phase 24 of the installation.The message of log is the following one:
ERROR 2006-03-25 17:33:28
FRF-00025 Unable to call function. Error message: connection closed without message (CM_NO_DATA_RECEIVED) .
ERROR 2006-03-25 17:33:29
MUT-03025 Caught ERfcExcept in Modulecall: connection closed without message (CM_NO_DATA_RECEIVED).
ERROR 2006-03-25 17:33:29
FCO-00011 The step createIGSDestination with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|13|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|1|0|createIGSDestination was executed with status ERROR .
Somebody can help me to solve this problem. Asi I can of a good time learn abap!!!!!
thanks!!!!!!
Hi,
Is the error in the phase "Change default passwords"?
Have you tried restarting the SAPInst? If the restart
doesn't help, please try to get a newer version of SAPInst
and continue. Note 929929 might help.
Regards
Srikishan
Similar Messages
-
Installation Error SAP Netweaver 04s Full Abap ed. Sneak Preview
Hello i get an error when installing the trialversion of SAP Netweaver 04s Full Abap ed. Sneak Preview. Here is the error.
ERROR 2006-03-17 08:37:43
The dbmcli call for action ACTIVATE failed. Check the logfile XCMDOUT.LOG.
ERROR 2006-03-17 08:37:43
The dbmcli call for action ACTIVATE failed. Check the logfile XCMDOUT.LOG.
ERROR 2006-03-17 08:37:43
FCO-00011 The step sdb_instance_activate with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_CreateDB|ind|ind|ind|ind|9|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|2|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0|sdb_instance_activate was executed with status ERROR .
I tried to retry this step and also tried to install the application again. Also there is no XCMDOUT.LOG. Can anybody help me?Hello and sorry for this late answer, but i always change between school and company.
So here is the KNLDIAG:
Date Time TID(hex) Typ MsgID Label Message-Text
2006-03-20 09:33:01 0xE88 19705 CONNECT Loading default TCPIP-DLL, ( 'sqltcp.dll')
2006-03-20 09:33:01 0xE88 19707 CONNECT WINSOCK: 2.0, SQLTCP-DLL: 7.6.0
2006-03-20 09:33:01 0xE88 20233 RTE Dump of all kernel parameters start
2006-03-20 09:33:01 0xE88 20206 RTE Using mode NORMAL for data volume 1
2006-03-20 09:33:01 0xE88 20234 RTE ADMIN=1
2006-03-20 09:33:01 0xE88 20234 RTE _AK_DUMP_ALLOWED=YES
2006-03-20 09:33:01 0xE88 20234 RTE ALLOW_MULTIPLE_SERVERTASK_UKTS=NO
2006-03-20 09:33:01 0xE88 20234 RTE AUTHENTICATION_ALLOW=
2006-03-20 09:33:01 0xE88 20234 RTE AUTHENTICATION_DENY=
2006-03-20 09:33:01 0xE88 20234 RTE AUTOSAVE=1
2006-03-20 09:33:01 0xE88 20234 RTE AUTO_RECREATE_BAD_INDEXES=NO
2006-03-20 09:33:01 0xE88 20234 RTE BACKUPRESULT=1
2006-03-20 09:33:01 0xE88 20234 RTE BACKUP_BLOCK_CNT=8
2006-03-20 09:33:01 0xE88 20234 RTE _BACKUP_HISTFILE=dbm.knl
2006-03-20 09:33:01 0xE88 20234 RTE _BACKUP_MED_DEF=dbm.mdf
2006-03-20 09:33:01 0xE88 20234 RTE CACHE_SIZE=12800
2006-03-20 09:33:01 0xE88 20234 RTE CALLSTACKLEVEL=0
2006-03-20 09:33:01 0xE88 20234 RTE _CAT_CACHE_MINSIZE=262144
2006-03-20 09:33:01 0xE88 20234 RTE CAT_CACHE_SUPPLY=3000
2006-03-20 09:33:01 0xE88 20234 RTE CHECKDATA=1
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_BACKUP=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_COMMON=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_CONVERTER=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_DATACACHE=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_DATAPAGELOG=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_FBM=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_IOMAN=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_KB_REGIONS=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOCK_SUPPLY=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOCK=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOGHISTORY=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOGPAGE=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOGTRANS=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_LOGVOLUME=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_REGIONS=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_SRVTASKS=0
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TABLE_WIDTH=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TASK_SPECIFIC_CATALOGCACHE=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TRANSLIST=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TREE_LOCKS=NO
2006-03-20 09:33:01 0xE88 20234 RTE CHECK_TREE=NO
2006-03-20 09:33:01 0xE88 20234 RTE CLUSTERED_IO=NO
2006-03-20 09:33:01 0xE88 20234 RTE COLUMNCOMPRESSION=YES
2006-03-20 09:33:01 0xE88 20234 RTE _COMMENT=
2006-03-20 09:33:01 0xE88 20234 RTE CONTROLPASSWORD=***
2006-03-20 09:33:01 0xE88 20234 RTE CONTROLUSERID=CONTROL
2006-03-20 09:33:01 0xE88 20234 RTE CONVERTER_REGIONS=8
2006-03-20 09:33:01 0xE88 20234 RTE DATABASEFULL=1
2006-03-20 09:33:01 0xE88 20234 RTE _DATA_CACHE_RGNS=16
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_GROUPS=1
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_MODE_0001=NORMAL
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_NAME_0001=D:\DISKD0001
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_SIZE_0001=1036672
2006-03-20 09:33:01 0xE88 20234 RTE DATA_VOLUME_TYPE_0001=F
2006-03-20 09:33:01 0xE88 20234 RTE DATE_TIME_FORMAT=INTERNAL
2006-03-20 09:33:01 0xE88 20234 RTE DBFILLINGABOVELIMIT=70L80M85M90H95H96H97H98H99H
2006-03-20 09:33:01 0xE88 20234 RTE DBFILLINGBELOWLIMIT=70L80L85L90L95L
2006-03-20 09:33:01 0xE88 20234 RTE DDLTRIGGER=YES
2006-03-20 09:33:01 0xE88 20234 RTE DEADLOCK_DETECTION=4
2006-03-20 09:33:01 0xE88 20234 RTE DEFAULT_CODE=ASCII
2006-03-20 09:33:01 0xE88 20234 RTE _DELAY_COMMIT=NO
2006-03-20 09:33:01 0xE88 20234 RTE _DELAY_LOGWRITER=0
2006-03-20 09:33:01 0xE88 20234 RTE DIAG_HISTORY_NUM=2
2006-03-20 09:33:01 0xE88 20234 RTE DIAG_HISTORY_PATH=d:sapdbdatawrkNSPDIAGHISTORY
2006-03-20 09:33:01 0xE88 20234 RTE _DIAG_SEM=0
2006-03-20 09:33:01 0xE88 20234 RTE _DW_IO_AREA_FLUSH=50
2006-03-20 09:33:01 0xE88 20234 RTE _DW_IO_AREA_SIZE=50
2006-03-20 09:33:01 0xE88 20234 RTE _DW_LRU_TAIL_FLUSH=25
2006-03-20 09:33:01 0xE88 20234 RTE ENABLE_CHECK_INSTANCE=YES
2006-03-20 09:33:01 0xE88 20234 RTE ENABLE_SYSTEM_TRIGGERS=YES
2006-03-20 09:33:01 0xE88 20234 RTE ERROR=3
2006-03-20 09:33:01 0xE88 20234 RTE _EVENTFILE=knldiag.evt
2006-03-20 09:33:01 0xE88 20234 RTE _EVENTSIZE=0
2006-03-20 09:33:01 0xE88 20234 RTE EVENT=1
2006-03-20 09:33:01 0xE88 20234 RTE EXPAND_COM_TRACE=NO
2006-03-20 09:33:01 0xE88 20234 RTE EXTERNAL_DUMP_REQUEST=NO
2006-03-20 09:33:01 0xE88 20234 RTE _FBM_LOW_IO_RATE=10
2006-03-20 09:33:01 0xE88 20234 RTE FBM_VOLUME_BALANCE=10
2006-03-20 09:33:01 0xE88 20234 RTE FBM_VOLUME_COMPRESSION=50
2006-03-20 09:33:01 0xE88 20234 RTE FILEDIR_SPINLOCKPOOL_SIZE=10
2006-03-20 09:33:01 0xE88 20234 RTE FORBID_LOAD_BALANCING=NO
2006-03-20 09:33:01 0xE88 20234 RTE FORMATTING_MODE=PARALLEL
2006-03-20 09:33:01 0xE88 20234 RTE FORMAT_DATAVOLUME=YES
2006-03-20 09:33:01 0xE88 20234 RTE HASHED_RESULTSET_CACHESIZE=262144
2006-03-20 09:33:01 0xE88 20234 RTE HASHED_RESULTSET=YES
2006-03-20 09:33:01 0xE88 20234 RTE HEAP_CHECK_LEVEL=0
2006-03-20 09:33:01 0xE88 20234 RTE HIRES_TIMER_TYPE=CPU
2006-03-20 09:33:01 0xE88 20234 RTE HS_STORAGE_DLL=libhsscopy
2006-03-20 09:33:01 0xE88 20234 RTE HS_SYNC_INTERVAL=50
2006-03-20 09:33:01 0xE88 20234 RTE _IDXFILE_LIST_SIZE=2048
2006-03-20 09:33:01 0xE88 20234 RTE INIT_ALLOCATORSIZE=237568
2006-03-20 09:33:01 0xE88 20234 RTE INSTANCE_TYPE=OLTP
2006-03-20 09:33:01 0xE88 20234 RTE _IOPROCS_FOR_PRIO=1
2006-03-20 09:33:01 0xE88 20234 RTE _IOPROCS_PER_DEV=1
2006-03-20 09:33:01 0xE88 20234 RTE _IOPROCS_SWITCH=2
2006-03-20 09:33:01 0xE88 20234 RTE JOIN_MAXTAB_LEVEL4=64
2006-03-20 09:33:01 0xE88 20234 RTE JOIN_MAXTAB_LEVEL9=5
2006-03-20 09:33:01 0xE88 20234 RTE JOIN_SEARCH_LEVEL=0
2006-03-20 09:33:01 0xE88 20234 RTE JOIN_TABLEBUFFER=128
2006-03-20 09:33:01 0xE88 20234 RTE _KERNELDIAGFILE=knldiag
2006-03-20 09:33:01 0xE88 20234 RTE KERNELDIAGSIZE=800
2006-03-20 09:33:01 0xE88 20234 RTE _KERNELDUMPFILE=knldump
2006-03-20 09:33:01 0xE88 20234 RTE _KERNELTRACEFILE=knltrace
2006-03-20 09:33:01 0xE88 20234 RTE KERNELTRACESIZE=700
2006-03-20 09:33:01 0xE88 20234 RTE KERNELVERSION=KERNEL 7.6.00 BUILD 018-123-113-357
2006-03-20 09:33:01 0xE88 20234 RTE LOAD_BALANCING_CHK=0
2006-03-20 09:33:01 0xE88 20234 RTE LOAD_BALANCING_DIF=10
2006-03-20 09:33:01 0xE88 20234 RTE LOAD_BALANCING_EQ=5
2006-03-20 09:33:01 0xE88 20234 RTE LOCAL_REDO_LOG_BUFFER_SIZE=0
2006-03-20 09:33:01 0xE88 20234 RTE _LOCK_SUPPLY_BLOCK=100
2006-03-20 09:33:01 0xE88 20234 RTE LOGABOVELIMIT=50L75L90M95M96H97H98H99H
2006-03-20 09:33:01 0xE88 20234 RTE LOGFULL=1
2006-03-20 09:33:01 0xE88 20234 RTE LOGSEGMENTFULL=1
2006-03-20 09:33:01 0xE88 20234 RTE LOG_BACKUP_TO_PIPE=NO
2006-03-20 09:33:01 0xE88 20234 RTE LOG_IO_QUEUE=200
2006-03-20 09:33:01 0xE88 20234 RTE LOG_MIRRORED=NO
2006-03-20 09:33:01 0xE88 20234 RTE LOG_QUEUE_COUNT=1
2006-03-20 09:33:01 0xE88 20234 RTE LOG_SEGMENT_SIZE=4266
2006-03-20 09:33:01 0xE88 20234 RTE LOG_VOLUME_NAME_001=D:\DISKL001
2006-03-20 09:33:01 0xE88 20234 RTE LOG_VOLUME_SIZE_001=12800
2006-03-20 09:33:01 0xE88 20234 RTE LOG_VOLUME_TYPE_001=F
2006-03-20 09:33:01 0xE88 20234 RTE LRU_FOR_SCAN=NO
2006-03-20 09:33:01 0xE88 20234 RTE MAXBACKUPDEVS=2
2006-03-20 09:33:01 0xE88 20234 RTE MAXCPU=1
2006-03-20 09:33:01 0xE88 20234 RTE MAXDATAVOLUMES=11
2006-03-20 09:33:01 0xE88 20234 RTE _MAXEVENTS=100
2006-03-20 09:33:01 0xE88 20234 RTE _MAXEVENTTASKS=2
2006-03-20 09:33:01 0xE88 20234 RTE _MAXGARBAGE_COLL=1
2006-03-20 09:33:01 0xE88 20234 RTE MAXLOCKS=300000
2006-03-20 09:33:01 0xE88 20234 RTE MAXLOGVOLUMES=2
2006-03-20 09:33:01 0xE88 20234 RTE MAXPAGER=16
2006-03-20 09:33:01 0xE88 20234 RTE MAXRGN_REQUEST=-1
2006-03-20 09:33:01 0xE88 20234 RTE MAXSERVERTASKS=63
2006-03-20 09:33:01 0xE88 20234 RTE _MAXTASK_STACK=1024
2006-03-20 09:33:01 0xE88 20234 RTE _MAXTRANS=264
2006-03-20 09:33:01 0xE88 20234 RTE MAXUSERTASKS=30
2006-03-20 09:33:01 0xE88 20234 RTE MAXVOLUMES=14
2006-03-20 09:33:01 0xE88 20234 RTE MAX_HASHTABLE_MEMORY=5120
2006-03-20 09:33:01 0xE88 20234 RTE MAX_LOG_QUEUE_COUNT=0
2006-03-20 09:33:01 0xE88 20234 RTE _MAX_MESSAGE_FILES=0
2006-03-20 09:33:01 0xE88 20234 RTE MAX_MESSAGE_LIST_LENGTH=100
2006-03-20 09:33:01 0xE88 20234 RTE MAX_RETENTION_TIME=480
2006-03-20 09:33:01 0xE88 20234 RTE MAX_SERVERTASK_STACK=150
2006-03-20 09:33:01 0xE88 20234 RTE MAX_SINGLE_HASHTABLE_SIZE=512
2006-03-20 09:33:01 0xE88 20234 RTE MAX_SPECIALTASK_STACK=200
2006-03-20 09:33:01 0xE88 20234 RTE _MBLOCK_DATA_SIZE=32768
2006-03-20 09:33:01 0xE88 20234 RTE _MBLOCK_QUAL_SIZE=16384
2006-03-20 09:33:01 0xE88 20234 RTE _MBLOCK_STACK_SIZE=32768
2006-03-20 09:33:01 0xE88 20234 RTE _MBLOCK_STRAT_SIZE=8192
2006-03-20 09:33:01 0xE88 20234 RTE MCOD=NO
2006-03-20 09:33:01 0xE88 20234 RTE MEMORY_ALLOCATION_LIMIT=0
2006-03-20 09:33:01 0xE88 20234 RTE MEM_ENHANCE_LIMIT=0
2006-03-20 09:33:01 0xE88 20234 RTE MINI_DUMP=NORMAL
2006-03-20 09:33:01 0xE88 20234 RTE _MINREPLY_SIZE=4096
2006-03-20 09:33:01 0xE88 20234 RTE MINSERVERTASKS=53
2006-03-20 09:33:01 0xE88 20234 RTE MIN_RETENTION_TIME=60
2006-03-20 09:33:01 0xE88 20234 RTE MONITOR_READ=2147483647
2006-03-20 09:33:01 0xE88 20234 RTE MONITOR_ROWNO=0
2006-03-20 09:33:01 0xE88 20234 RTE MONITOR_SELECTIVITY=0
2006-03-20 09:33:01 0xE88 20234 RTE MONITOR_TIME=2147483647
2006-03-20 09:33:01 0xE88 20234 RTE _MP_DISP_LOOPS=1
2006-03-20 09:33:01 0xE88 20234 RTE _MP_DISP_PRIO=DEFAULT
2006-03-20 09:33:01 0xE88 20234 RTE _MP_RGN_BUSY_WAIT=DEFAULT
2006-03-20 09:33:01 0xE88 20234 RTE _MP_RGN_DIRTY_READ=DEFAULT
2006-03-20 09:33:01 0xE88 20234 RTE MP_RGN_LOOP=-1
2006-03-20 09:33:01 0xE88 20234 RTE _MP_RGN_PRIO=DEFAULT
2006-03-20 09:33:01 0xE88 20234 RTE _MP_RGN_QUEUE=YES
2006-03-20 09:33:01 0xE88 20234 RTE _MULT_IO_BLOCK_CNT=4
2006-03-20 09:33:01 0xE88 20234 RTE OFFICIAL_NODE=
2006-03-20 09:33:01 0xE88 20234 RTE OMS_HEAP_BLOCKSIZE=10000
2006-03-20 09:33:01 0xE88 20234 RTE OMS_HEAP_COUNT=1
2006-03-20 09:33:01 0xE88 20234 RTE OMS_HEAP_LIMIT=0
2006-03-20 09:33:01 0xE88 20234 RTE OMS_HEAP_THRESHOLD=100
2006-03-20 09:33:01 0xE88 20234 RTE _OMS_REGIONS=0
2006-03-20 09:33:01 0xE88 20234 RTE _OMS_RGNS=7
2006-03-20 09:33:01 0xE88 20234 RTE OMS_RUN_IN_UDE_SERVER=NO
2006-03-20 09:33:01 0xE88 20234 RTE OMS_STREAM_TIMEOUT=30
2006-03-20 09:33:01 0xE88 20234 RTE OMS_VERS_THRESHOLD=2097152
2006-03-20 09:33:01 0xE88 20234 RTE ONLINE=1
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_AGGREGATION=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_FETCH_REVERSE=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_FIRST_ROWS=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_HASHTABLE=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_HASH_MINIMAL_RATIO=1
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_ONEPHASE=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_OPERATOR_SORT=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_OUTER=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_PARALLEL_MINSIZE=1000000
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_JOIN_PARALLEL_SERVERS=0
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_MIN_MAX=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_OPERATOR_JOIN_COSTFUNC=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_OPERATOR_JOIN=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_QUAL_ON_INDEX=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIMIZE_QUERYREWRITE=STATEMENT
2006-03-20 09:33:01 0xE88 20234 RTE OPTIM_CACHE=NO
2006-03-20 09:33:01 0xE88 20234 RTE OPTIM_INV_ONLY=YES
2006-03-20 09:33:01 0xE88 20234 RTE OPTIM_JOIN_FETCH=0
2006-03-20 09:33:01 0xE88 20234 RTE OPTIM_MAX_MERGE=500
2006-03-20 09:33:01 0xE88 20234 RTE OUTOFSESSIONS=2
2006-03-20 09:33:01 0xE88 20234 RTE _PACKET_SIZE=131072
2006-03-20 09:33:01 0xE88 20234 RTE _PAGE_SIZE=8192
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_COM=10
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_IOC=80
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_RAV=80
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_REX=40
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_BASE_U2U=100
2006-03-20 09:33:01 0xE88 20234 RTE _PRIO_FACTOR=80
2006-03-20 09:33:01 0xE88 20234 RTE PROTECT_DATACACHE_MEMORY=NO
2006-03-20 09:33:01 0xE88 20234 RTE _READAHEAD_BLOBS=32
2006-03-20 09:33:01 0xE88 20234 RTE REQUEST_TIMEOUT=5000
2006-03-20 09:33:01 0xE88 20234 RTE _RESTART_TIME=600
2006-03-20 09:33:01 0xE88 20234 RTE _ROW_RGNS=8
2006-03-20 09:33:01 0xE88 20234 RTE _RTEDUMPFILE=rtedump
2006-03-20 09:33:01 0xE88 20234 RTE RTE_TEST_REGIONS=0
2006-03-20 09:33:01 0xE88 20234 RTE RUNDIRECTORY=d:sapdbdatawrkNSP
2006-03-20 09:33:01 0xE88 20234 RTE SEQUENCE_CACHE=1
2006-03-20 09:33:01 0xE88 20234 RTE _SERVERDB_FOR_SAP=YES
2006-03-20 09:33:01 0xE88 20234 RTE SESSION_TIMEOUT=900
2006-03-20 09:33:01 0xE88 20234 RTE SET_VOLUME_LOCK=YES
2006-03-20 09:33:01 0xE88 20234 RTE SHAREDSQL_COMMANDCACHESIZE=32768
2006-03-20 09:33:01 0xE88 20234 RTE SHAREDSQL_EXPECTEDSTATEMENTCOUNT=1500
2006-03-20 09:33:01 0xE88 20234 RTE SHAREDSQL=YES
2006-03-20 09:33:01 0xE88 20234 RTE SHOW_MAX_KB_STACK_USE=NO
2006-03-20 09:33:01 0xE88 20234 RTE SHOW_MAX_STACK_USE=NO
2006-03-20 09:33:01 0xE88 20234 RTE STANDBY=0
2006-03-20 09:33:01 0xE88 20234 RTE SUBTREE_LOCKS=NO
2006-03-20 09:33:01 0xE88 20234 RTE SYMBOL_DEMANGLING=NO
2006-03-20 09:33:01 0xE88 20234 RTE SYMBOL_RESOLUTION=YES
2006-03-20 09:33:01 0xE88 20234 RTE SYSTEMERROR=3
2006-03-20 09:33:01 0xE88 20234 RTE _TAB_RGNS=8
2006-03-20 09:33:01 0xE88 20234 RTE _TASKCLUSTER_01=tw;al;ut;2000*sv,100*bup;10*ev,10*gc;
2006-03-20 09:33:01 0xE88 20234 RTE _TASKCLUSTER_02=ti,100*dw;30000*us;
2006-03-20 09:33:01 0xE88 20234 RTE _TASKCLUSTER_03=compress
2006-03-20 09:33:01 0xE88 20234 RTE TIME_MEASUREMENT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_AK=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_ALLOCATOR=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_CATALOG=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_CLIENTKERNELCOM=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_COMMON=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_COMMUNICATION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_CONVERTER=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DATACHAIN=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DATAPAM=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DATATREE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DBPROC=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DEFAULT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_DELETE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_FBM=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_FILEDIR=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_FRAMECTRL=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_INDEX=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_INSERT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_IOMAN=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_IPC=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_JOIN=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_KSQL=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOCK=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGACTION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGHISTORY=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGPAGE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGTRANS=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LOGVOLUME=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_LONG=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_MEMORY=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_MESSAGES=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECTCONTAINER=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT_ADD=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT_ALTER=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT_FREE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT_GET=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OBJECT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_CONTAINERDIR=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_CONTEXT=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_ERROR=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_FLUSHCACHE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_INTERFACE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_KEYRANGE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_KEY=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_LOCK=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_MEMORY=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_NEWOBJ=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_SESSION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_STREAM=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_VAROBJECT=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OMS_VERSION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_OPTIMIZE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_ORDER_STANDARD=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_ORDER=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGER=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_BUP=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_EV=2
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_GC=20
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_LW=5
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_PG=3
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_SV=5
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_TI=2
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_US=10
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES_UT=5
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PAGES=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_PRIMARY_TREE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_QUERYREWRITE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_RUNTIME=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SELECT=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SHAREDSQL=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SQLMANAGER=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SRVTASKS=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_STOP_ERRORCODE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SYNCHRONISATION=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_SYSVIEW=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_TABLE=0
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_TIME=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_UPDATE=NO
2006-03-20 09:33:01 0xE88 20234 RTE TRACE_VOLUME=0
2006-03-20 09:33:01 0xE88 20234 RTE TRANS_HISTORY_SIZE=0
2006-03-20 09:33:01 0xE88 20234 RTE _TRANS_RGNS=8
2006-03-20 09:33:01 0xE88 20234 RTE TRANS_THRESHOLD_VALUE=60
2006-03-20 09:33:01 0xE88 20234 RTE UKT_CPU_RELATIONSHIP=NONE
2006-03-20 09:33:01 0xE88 20234 RTE _UNICODE=YES
2006-03-20 09:33:01 0xE88 20234 RTE UPDATESTAT_PARALLEL_SERVERS=0
2006-03-20 09:33:01 0xE88 20234 RTE UPDSTATWANTED=1
2006-03-20 09:33:01 0xE88 20234 RTE USED_MAX_LOG_QUEUE_COUNT=1
2006-03-20 09:33:01 0xE88 20234 RTE USESELECTFETCH=YES
2006-03-20 09:33:01 0xE88 20234 RTE USEVARIABLEINPUT=NO
2006-03-20 09:33:01 0xE88 20234 RTE _USE_ASYNC_IO=YES
2006-03-20 09:33:01 0xE88 20234 RTE USE_COROUTINES=YES
2006-03-20 09:33:01 0xE88 20234 RTE USE_FIBERS=YES
2006-03-20 09:33:01 0xE88 20234 RTE _USE_IOPROCS_ONLY=NO
2006-03-20 09:33:01 0xE88 20234 RTE USE_MEM_ENHANCE=NO
2006-03-20 09:33:01 0xE88 20234 RTE USE_OPEN_DIRECT=NO
2006-03-20 09:33:01 0xE88 20234 RTE USE_SYSTEM_PAGE_CACHE=YES
2006-03-20 09:33:01 0xE88 20234 RTE _UTILITY_PROTFILE=dbm.utl
2006-03-20 09:33:01 0xE88 20234 RTE UTILITY_PROTSIZE=100
2006-03-20 09:33:01 0xE88 20234 RTE VOLUMENO_BIT_COUNT=8
2006-03-20 09:33:01 0xE88 20234 RTE _WORKDATA_SIZE=8192
2006-03-20 09:33:01 0xE88 20234 RTE _WORKSTACK_SIZE=8192
2006-03-20 09:33:01 0xE88 20234 RTE XP_CONVERTER_REGIONS=0
2006-03-20 09:33:01 0xE88 20234 RTE XP_DATA_CACHE_RGNS=0
2006-03-20 09:33:01 0xE88 20234 RTE XP_MAXPAGER=0
2006-03-20 09:33:01 0xE88 20235 RTE Dump of all kernel parameters done
2006-03-20 09:33:01 0xE88 19841 DIAGHIST Backup of diagnostic files is in progress
2006-03-20 09:33:01 0xE88 19842 DIAGHIST Backup of diagnostic files has finished
2006-03-20 09:33:01 0xE88 19600 VERSION 'Kernel 7.6.00 Build 018-123-113-357'
2006-03-20 09:33:01 0xE88 19600 VERSION 'W32/INTEL 7.6.00 Build 018-123-113-357'
2006-03-20 09:33:01 0xE88 19769 INFO Starting SERVERDB: 'NSP'
2006-03-20 09:33:01 0xE88 19770 INFO SERVERNODE: 'AUA5062'
2006-03-20 09:33:01 0xE88 19771 INFO Process ID: 2724
2006-03-20 09:33:01 0xE88 19773 INFO Date: 2006-03-20
2006-03-20 09:33:01 0xE88 19772 INFO Owner: 'SYSTEM'
2006-03-20 09:33:01 0xE88 19775 INFO Processors: 1
2006-03-20 09:33:01 0xE88 19782 INFO Fiber: 'YES'
2006-03-20 09:33:01 0xE88 19776 INFO Max virtual memory: 2047 MB
2006-03-20 09:33:01 0xE88 19777 INFO Total physical memory: 1015 MB
2006-03-20 09:33:01 0xE88 19778 INFO Available physical memory: 535 MB
2006-03-20 09:33:01 0xE88 20219 RTE Memory allocation not limited
2006-03-20 09:33:01 0xE88 20220 RTE System page cache usage enabled
2006-03-20 09:33:01 0xE88 19692 TCLUSTER tw;al;ut;2000*sv,100*bup;10*ev,10*gc;ti,100*dw;30000*us;compress
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of 'BUP': 0
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' DW': 16
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' US': 30
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' SV': 63
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' EV': 2
2006-03-20 09:33:01 0xE88 19693 TCLUSTER number of ' GC': 1
2006-03-20 09:33:01 0xE88 19692 TCLUSTER Total Number of UKT 7
2006-03-20 09:33:01 0xE88 19692 TCLUSTER Number of UKT with User Tasks 1
2006-03-20 09:33:01 0xE88 19860 MEMORY I/O buffer cache: 12800 Pages allocated
2006-03-20 09:33:01 0xE88 19811 EVENTING Suppressing output to 'knldiag.evt' 0 pages
2006-03-20 09:33:01 0xE88 19812 EVENTING Eventbuffer 100 events 2 tasks
2006-03-20 09:33:01 0xBBC 19821 TASKING Thread 3004 starting
2006-03-20 09:33:02 0xE88 19831 TRACE_IO Configured _MAX_MESSAGE_FILES:0
2006-03-20 09:33:02 0xE88 19832 TRACE_IO Disabled: No TraceMessagefiles wanted
2006-03-20 09:33:02 0xA1C 19688 THREAD CLOCK thread started
2006-03-20 09:33:02 0xF6C 19688 THREAD TIMER thread started
2006-03-20 09:33:02 0x140 19688 THREAD ASYNC0 thread started
2006-03-20 09:33:02 0x300 20213 RTE CONSOLE thread started
2006-03-20 09:33:02 0xEF4 19688 THREAD REQUESTOR thread started
2006-03-20 09:33:02 0x128 19821 TASKING Thread 296 starting
2006-03-20 09:33:02 0xB28 19821 TASKING Thread 2856 starting
2006-03-20 09:33:02 0x124 19821 TASKING Thread 292 starting
2006-03-20 09:33:13 0xE88 19649 CONNECT Kernel threads initialization timeout
2006-03-20 09:33:13 0xF44 19821 TASKING Thread 3908 starting
2006-03-20 09:33:13 0x3B8 19821 TASKING Thread 952 starting
2006-03-20 09:33:13 0x9F0 19821 TASKING Thread 2544 starting
2006-03-20 09:33:13 0x40C 19821 TASKING Thread 1036 starting
2006-03-20 09:33:13 0xD14 19627 TASKING UKT started, TID:0xD14
2006-03-20 09:33:13 0x664 19627 TASKING UKT started, TID:0x664
2006-03-20 09:33:13 0xB70 19627 TASKING UKT started, TID:0xB70
2006-03-20 09:33:13 0x80C 19627 TASKING UKT started, TID:0x80C
2006-03-20 09:33:13 0x908 19627 TASKING UKT started, TID:0x908
2006-03-20 09:33:13 0x448 19627 TASKING UKT started, TID:0x448
2006-03-20 09:33:13 0xEE8 19627 TASKING UKT started, TID:0xEE8
2006-03-20 09:33:13 0xEE8 19615 VOLUMEIO Attaching volume 'knltrace'
2006-03-20 09:33:13 0x830 19613 DBSTATE I/O thread for 'knltrace' started
2006-03-20 09:33:13 0xEE8 20038 Admin Kernel state: 'ADMIN' reached
2006-03-20 09:33:13 0xEE8 20023 Pager Initialized without clustered IO
2006-03-20 09:33:13 0xEE8 54003 dynpool HIST_DIR item size : 8
2006-03-20 09:33:13 0xEE8 54003 dynpool HIST_DIR num items : 30
2006-03-20 09:33:13 0xEE8 54003 dynpool DYNP_B930_HIST_DIR : 240
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX FileListItemSize : 8
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX NumFileListItems : 2048
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX FileListSizeAll : 16384
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX FunnelItemSize : 8
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX QueueItemPtrSize : 4
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX QueueItemSize : 36
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX SortItemSize : 16
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX NumFunnelItems : 2048
2006-03-20 09:33:13 0xEE8 54003 dynpool INDEX FunnelSizeAll : 131072
2006-03-20 09:33:13 0xEE8 54003 dynpool DYNP_B49_IDXSIZE : 147456
2006-03-20 09:33:13 0xEE8 54003 dynDATA DYND_K57_KB_PAGES : 11
2006-03-20 09:33:13 0xEE8 9 SrvTasks Available Servertasks: 63
2006-03-20 09:33:13 0xEE8 54003 dynDATA BACKUP RESTART REC (8K): 1
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP TASK LIST : 208
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP TAPE LIST : 688
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP DEVSP LIST : 96
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP VOL IDX LIST : 32
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP SRR QUEUE : 656
2006-03-20 09:33:13 0xEE8 54003 dynpool DYNP_K38_SAVE_GLOB : 1584
2006-03-20 09:33:13 0xEE8 54003 dynDATA DYND_K38_SAVE : 217
2006-03-20 09:33:13 0xEE8 54003 dynDATA BACKUP RESTART REC (8K): 1
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP TASK LIST : 32
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP TAPE LIST : 688
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP DEVSP LIST : 16
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP VOL IDX LIST : 32
2006-03-20 09:33:13 0xEE8 54003 dynpool BACKUP SRR QUEUE : 128
2006-03-20 09:33:13 0xEE8 54003 dynpool DYNP_K38_AUTOSAVE : 880
2006-03-20 09:33:13 0xEE8 54003 dynDATA DYND_K38_AUTOSAVE : 41
2006-03-20 09:33:13 0xEE8 19930 TASKING Kernel initialization completed
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 5
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:0
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 20
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:1
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 19
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:2
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 18
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:3
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 17
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:4
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 16
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:5
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 15
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:6
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 14
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:7
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 13
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:8
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 12
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:9
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 11
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:10
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 10
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:11
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 9
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:12
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 8
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:13
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 7
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:14
2006-03-20 09:33:13 0xEE8 20019 Pager Start TaskId: 6
2006-03-20 09:33:13 0xEE8 20020 Pager First DataCacheSegment:15
2006-03-20 09:33:13 0xF6C 3 RunTime State changed from STARTING to ADMIN
2006-03-20 09:33:13 0xF6C 19601 DBSTATE SERVERDB is ready
============================================ begin of write cycle ==================
2006-03-20 09:33:13 0xF6C 20223 RTE Database tries automatic restart
2006-03-20 09:33:13 0x1F0 19821 TASKING Thread 496 starting
2006-03-20 09:33:13 0x448 19633 CONNECT Connect req. (T21, Node:'', PID:4084)
2006-03-20 09:33:13 0x448 19615 VOLUMEIO Attaching volume 'D:\DISKD0001'
2006-03-20 09:33:13 0xCC8 ERR 18164 VOLUMEIO Could not read page 0 from volume: 'D:\DISKD0001', rc = 24
2006-03-20 09:33:14 0xEE8 31 SrvTasks Permanently reserved 13 servertasks for 'Backup / Restore'.
2006-03-20 09:33:14 0xEE8 31 SrvTasks Permanently reserved 2 servertasks for 'Backup / Restore'.
2006-03-20 09:33:14 0xCC8 ERR 18164 VOLUMEIO Could not read page 0 from volume: 'D:\DISKD0001', rc = 24
2006-03-20 09:33:15 0xCC8 ERR 18164 VOLUMEIO Could not read page 0 from volume: 'D:\DISKD0001', rc = 24
2006-03-20 09:33:15 0x448 ERR 20031 IOMan IOMan_Volume.cpp:976
2006-03-20 09:33:15 0x448 ERR 20031 IOMan 2006-03-20 09:33:15 IOMan Error 20031
2006-03-20 09:33:15 0x448 ERR 20031 IOMan Attach error on Data volume 1: error evaluating volume
2006-03-20 09:33:15 0x448 ERR 3 Admin Kernel_Administration.cpp:606
2006-03-20 09:33:15 0x448 ERR 3 Admin 2006-03-20 09:33:15 Admin Error 3
2006-03-20 09:33:15 0x448 ERR 3 Admin Database state: OFFLINE
2006-03-20 09:33:15 0x448 ERR 3 Admin + Kernel_Trace.cpp:223
2006-03-20 09:33:15 0x448 ERR 3 Admin + 2006-03-20 09:33:15 KernelCommon Info 6
2006-03-20 09:33:15 0x448 ERR 3 Admin - Internal errorcode, Errorcode 9050 "disk_not_accessible"
2006-03-20 09:33:15 0x448 ERR 3 Admin + Kernel_Administration.cpp:365
2006-03-20 09:33:15 0x448 ERR 3 Admin + 2006-03-20 09:33:15 Admin Error 20014
2006-03-20 09:33:15 0x448 ERR 3 Admin - RestartFilesystem failed with 'I/O error'
2006-03-20 09:33:15 0x448 19651 CONNECT Connection released, T21
2006-03-20 09:33:15 0x448 19621 DBSTATE Shutdown kill requested
2006-03-20 09:33:15 0xE88 ERR 7 Messages Msg_List.cpp:3617
2006-03-20 09:33:15 0xE88 ERR 7 Messages 2006-03-20 09:33:15 Messages Error 7
2006-03-20 09:33:15 0xE88 ERR 7 Messages Begin of dump of registered messages
2006-03-20 09:33:15 0xE88 ERR 10 Messages Msg_List.cpp:3631
2006-03-20 09:33:15 0xE88 ERR 10 Messages 2006-03-20 09:33:15 Messages Error 10
2006-03-20 09:33:15 0xE88 ERR 10 Messages abort dump of registered messages
2006-03-20 09:33:15 0xE88 ERR 8 Messages Msg_List.cpp:3636
2006-03-20 09:33:15 0xE88 ERR 8 Messages 2006-03-20 09:33:15 Messages Error 8
2006-03-20 09:33:15 0xE88 ERR 8 Messages End of the message list registry dump
2006-03-20 09:33:15 0xD14 20000 Trace Start flush kernel trace
2006-03-20 09:33:15 0xD14 19617 VOLUMEIO Single I/O attach, 'knltrace', UKT:1
2006-03-20 09:33:15 0xE88 19684 TASKING Tracewriter termination timeout: 1200 sec
2006-03-20 09:33:15 0x1F0 ERR 20125 RTE RTE_ExternalCall.cpp:877
2006-03-20 09:33:15 0x1F0 ERR 20125 RTE 2006-03-20 09:33:15 RTE Error 20125
2006-03-20 09:33:15 0x1F0 ERR 20125 RTE Database automatic restart failed
2006-03-20 09:33:16 0xD14 20001 Trace Stop flush kernel trace
2006-03-20 09:33:16 0xD14 20002 Trace Start flush kernel dump
2006-03-20 09:33:16 0xD14 20003 Trace Stop flush kernel dump
2006-03-20 09:33:16 0xD14 19619 TASKING Releasing tracewriter
2006-03-20 09:33:16 0xE88 19890 DIAGHIST Backup of diagnostic files will be forced at next restart
2006-03-20 09:33:16 0xE88 19600 VERSION 'Kernel 7.6.00 Build 018-123-113-357'
2006-03-20 09:33:16 0xE88 19654 DBSTATE SERVERDB 'NSP' has stopped
-------------------------------------------- current write position ---------------- -
Webdynpro doesn't start after installation of Sneak Preview SAP NetWeaver
Hi,
I have just installed the Sneak Preview SAP NetWeaver 2004. In the sap console I see that all the processes have successfully started.
However when I try to open the WebDynpro content administrator via browser at http://<host>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
I get the following error:
An error has occurred:
"Failed to process the request."
Error stacktrace:
java.util.MissingResourceException: Can't find bundle for base name com.sap.tc.webdynpro.clientimpl.resourcesTranslated.MessageBundle, locale is
at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:839)
at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:729)
Can anyone help me track down this problem.
VardiHello Stefan,
I'm sorry but I get an internal error:
PluginName: Web Dynpro Model Editor Services
Plugin ID: com.sap.ide.webdynpro.service.modeleditor
Class: com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog
Method: nextPressed
Message: Internal error - see detail information in exception trace.
Exception: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
It seem's I have a fundamental error in my installation.
Do you know a solution for the problem.
Again, thank you for your help.
Best regards
Manfred -
BI content for Sneak Preview SAP NetWeaver 7.0 ABAP Trial Version
Hi,
Can any one tell me or provide me the URL where to download BI Business Content for SAP NetWeaver 7.0 ABAP Trial Version?
Thanks in advance,
Regards,
Kannan
Edited by: Kannan Jagadeesan on Apr 28, 2008 8:40 AMThere are several software in http://www.rarlab.com/download.htm
Anything in particular that I should user?
Regards
Sudhakar -
How can i exend my Sneak Preview SAP NetWeaver 04s installation ?
Hi,
My license is valid up to: 26.04.2006. I would like to extend it for a couple of months.
How can i get a new License Key ? I have been told by [email protected] to ask my question via this forum.
Thank in advance !
A+
Michel R. Osborne, [email protected]
Certifié SAP Basis - Spécialiste SAP NetWeaver
Directeur Associé - DMR Conseil/FujitsuHi Michel,
Nice to hear the problem is solved. Also you may close the
message so as to indicate its solved.
Please do reward points for replies that help
Regards
Srikishan -
Reinstalling Sneak Preview SAP Netweaver 2004s for ABAP
I had an error, installing the sneak preview.
So I want to reinstall it, so when I was in the uninstall.
I couldn´t erase the MAXdb, when I wanna drop the NSP db the program ask me user name and password.
I put in user name: superdba and password that I have set it before (in the installation)
I he tell me that is incorrect ¬¬ Im sure that the pass is okey, so what I wanna know is which is the name that SAP use it to name the admin of the DB, because superdba is not working.
and if the name is really superdba, there is a way of unistalling the MaxDB ???Rodrigo,
There are so many registries created during the installation. You may download the registry clean-up utility using the following link.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67d87cef-0d01-0010-e985-d9af92303bd4
If it still would not work, let me know. We should clear those manually. -
Sneak Preview SAP NetWeaver 2004s Full Java Edition Download
Hi All,
i try to download the Sneak Preview with DAP.
After terminating file 1 download, the file size is only ca. 380 MB instead of 1.9 GB. I can't download the full file. did any body now the problem?Hi Bris,
I have installed DAP and tried downloading sneak preview 2004s Java edition. But it is still downloading in normal window , its not using DAP to download. I tried taking the url manually and try downloading it , but still it doesn't work. Could someone guide me on how to use DAP to download sneak preview coz it does not download properly by normal means.
Thanks and regards,
Nirmal G -
ABAP Sneak Preview SAP NetWeaver 04s: where is the new Editor?
It's so nice to have NetWeawer 2004s up and running...
Anybody knows where is the new ABAP Editor?
As I know, it should be included but I cannot see it...
I'm using the SAPgui 640 Final Release - Patch 8.i am not sure whether it was there in patch 8, but i upgraded to patch14 and activated the new editor from
se38->utilities->settings->ABAP editor
here choose radiobutton front-end Editor (New)
warning:- dont apply gui patch 15 it has got some problem. when i applied patch 15 i couldnt event start the sap logon pad.
Regards
Raja
Message was edited by: Durairaj Athavan Raja -
ABAP Sneak Preview SAP NetWeaver 04s: Window Splitter
SAPgui Patch15:
Anybody found how to activate the Window Splitter in order to work with different parts of the program simultaneously?
It is reported on the documentation and in the "The New ABAP Editor" presentation here in sdn.sap.com.I found it.
SE38 - Utilities - Splitscreen editor - Utilities - Settings - Vertical -
ABAP or JAVA edition of the sneak preview sap netweaver ??
Hi we want to install a local enviroment to test sap netweaver, in particular, sap portals.
We have seen that there are two edition and I have some questions:
1.-What's the diference between the ABAP and JAVA edition of the sneak preview sap netweaver? The abap does not include the portals, true?
2.-is possible to install both, ABAP and JAVA edition of the sneak preview sap netweaver?
3.-Are there installation guides and how-to of the sneak preview sap netweaver?
Thanks in advance.
Best Regards1) The ABAP side is more of the SAP basis platform which R/3 runs on top of. You have ABAP programs, Data Dictionary, Function modules, etc. Portals does NOT run on this side. If you are just looking for portals, then just install the java stack.
2) Yes it is possible.
3) There are a few weblogs on the subject.
/people/sugree.phatanapherom/blog/2005/08/17/a-visual-installation-guide-on-sneak-preview-sap-netweaver-04-abap-edition
/people/sugree.phatanapherom/blog/2005/08/01/a-visual-installation-guide-on-sneak-preview-sap-netweaver-04-java-edition
/people/gregor.wolf3/blog/2005/09/24/a-visual-installation-guide-on-sneak-preview-sap-netweaver-04-java-slim-edition
Please award points for helpful answers. Thanks.
Regards,
Rich Heilman -
Sneak Preview SAP NetWeaver 2004s istalation problem
Hy there,
I have an error on installing Sneak Preview SAP NetWeaver 2004s (ABAP)
The last lines in XCMDOUT.LOG are
ERROR 2006-04-19 08:46:28
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
ERROR 2006-04-19 08:46:28
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
ERROR 2006-04-19 08:46:28
FCO-00011 The step sdb_init_instance_type with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_CreateDB|ind|ind|ind|ind|9|0|NW_ADA_DB|ind|ind|ind|ind|6|0|SdbPreInstanceDialogs|ind|ind|ind|ind|2|0|SdbInstanceDialogs|ind|ind|ind|ind|1|0|SDB_INSTANCE_CREATE|ind|ind|ind|ind|0|0|sdb_init_instance_type was executed with status ERROR .
Please hel me, I'm new in SAP
calin adrian comes
email: [email protected]Hi calin
There seems to be some problem with sp 16 max DB (version 7.6).
Please see this thread of the SDN forum
SP16 Preview: MaxDB Installation fails (Phase 6)
U will have to replace it with MAX DB ver7.5 .
If you find that ur problem is solved ,do not forget to reward points .
regards
rajeshkr -
Trouble with installation Sneak Preview SAP NetWeaver 2004s
Hello,
the installation of the Sneak Preview SAP NetWeaver 2004s fails at step 3 with the following error:
ERROR 2006-02-27 16:24:27
FSL-01001 Unable to check existence of account nadine\SAPServiceNSP. Der Arbeitsstationsdienst wurde nicht gestartet.
ERROR 2006-02-27 16:24:27
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2006-02-27 16:24:27
FCO-00011 The step createAccounts with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .
I've checked following points:
- OS: Windows XP Professional
- Loopback adapter is installed and working
- hosts file contains correct IP-address
- the groups SAP_NSP_LocalAdmin and SAP_NSP_GlobalAdmin were created in step 3
- I can create the accounts nspadm and SAPServiceNSP by hand (with the same user!) and the installation continues but I ran into further errors in step 4.
Who can help?
Regards StefanHi , thanks for your hints .
I am thru .
What I did : create manually the user nspadm and NSPServiceAdm under Windows user.
pb was, as it is a company computer, we also have policies about what to put in passwords (capital letter, special caracters etc ...)
Now I'll see until which step I can go.
Cheers -
Issue with common system files for Sneak Preview SAP NetWeaver 2004
Hello,
I am trying to install Sneak Preview SAP NetWeaver 2004 and 7.0 - Full Java Edition with SAP NetWeaver Portal onto my machine.
On the third step of installation-- install common system files-- I am getting the some error messages and the installation was stopped. Can anyone kindly provide some assistance?
THANK YOU in advanced.
Errors:
INFO[E] 2007-09-10 00:18:17 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
WARNING 2007-09-10 00:18:18 [ianxcreghelper.cpp:235]
CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
ERROR 2007-09-10 00:18:18 [ianxcreghelper.cpp:482]
CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:18:18
CJSlibModule::writeError_impl()
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:18:18 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
INFO 2007-09-10 00:24:23 [iaxxgenimp.cpp:779]
showDialog()
An error occured and the user decided to rety the current step: "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
INFO 2007-09-10 00:24:23
CJSlibModule::writeInfo_impl()
Setting ACL of registry entries for SAP system J2E...
INFO[E] 2007-09-10 00:24:32 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
WARNING 2007-09-10 00:24:32 [ianxcreghelper.cpp:235]
CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
ERROR 2007-09-10 00:24:32 [ianxcreghelper.cpp:482]
CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:24:32
CJSlibModule::writeError_impl()
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:24:32 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
INFO 2007-09-10 00:24:46 [iaxxgenimp.cpp:787]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
Exit status of child: 1I am not sure if this helps, but SAP_J2E_LocalAdmin exists in my system as a group not user.
-
Sneak Preview SAP Netweaver 2004S SR1
Hi All,
I installed Sneak Preview SAP Netweaver 2004S SR1.
After that I found in sap management console, the second instance has yellow light. In process "jcontrol.EXE", it has status "stopped".
The developer Trace is as follows :
trc file: "F:\usr\sap\RAJ\JC01\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 4280
system name : RAJ
system nr. : 01
started at : Mon Apr 09 13:56:39 2007
arguments :
arg[00] : F:\usr\sap\RAJ\JC01\exe\jcontrol.EXE
arg[01] : pf=F:\usr\sap\RAJ\SYS\profile\RAJ_JC01_sumt-hyd
[Thr 5800] Mon Apr 09 13:56:40 2007
[Thr 5800] *** WARNING => INFO: Unknown property [instance.box.number=RAJJC01sumt-hyd] [jstartxx.c 841]
[Thr 5800] *** WARNING => INFO: Unknown property [instance.en.host=sumt-hyd] [jstartxx.c 841]
[Thr 5800] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c 841]
[Thr 5800] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties;F:\usr\sap\RAJ\JC01\SDM\program\config\sdm_jstartup.properties]
-> ms host : sumt-hyd
-> ms port : 3900
-> OS libs : F:\usr\sap\RAJ\JC01\j2ee\os_libs
-> Admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> files [01] : F:\usr\sap\RAJ\JC01\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : sumt-hyd
-> ms port : 3900
-> os libs : F:\usr\sap\RAJ\JC01\j2ee\os_libs
-> admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> [01] bootstrap_ID12336400 : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> [02] bootstrap_ID12336450 : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID12336400 : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> [01] ID12336450 : F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> [02] sdm : F:\usr\sap\RAJ\JC01\SDM\program\config\sdm_jstartup.properties
[Thr 5800] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 5800] [Node: bootstrap] java home is set by profile parameter
Java Home: F:\rajendra\Program Files\javasdk
[Thr 5800] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\RAJ\JC01\exe\jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> node execute : yes
-> java path : F:\rajendra\Program Files\javasdk
-> java parameters : -Djco.jarm=1 -Djco.jarm=1
-> java vm version : 1.4.2_09-b05
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : x86
-> heap size : 512M
-> root path : F:\usr\sap\RAJ\JC01\j2ee\cluster
-> class path : .\bootstrap\launcher.jar
-> OS libs path : F:\usr\sap\RAJ\JC01\j2ee\os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : F:\usr\sap\RAJ\JC01\exe\jstartup.jar;F:\usr\sap\RAJ\JC01\exe\jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0123364
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = F:\usr\sap\RAJ\JC01\exe\jlaunch.exe
-> arg[00] = F:\usr\sap\RAJ\JC01\exe\jlaunch.exe
-> arg[01] = pf=F:\usr\sap\RAJ\SYS\profile\RAJ_JC01_sumt-hyd
-> arg[02] = -DSAPINFO=RAJ_01_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=F:\usr\sap\RAJ\JC01\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_4280
-> arg[06] = -nodeName=bootstrap
-> arg[07] = -jvmOutFile=F:\usr\sap\RAJ\JC01\work\jvm_bootstrap.out
-> arg[08] = -stdOutFile=F:\usr\sap\RAJ\JC01\work\std_bootstrap.out
-> arg[09] = -locOutFile=F:\usr\sap\RAJ\JC01\work\dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=F:\usr\sap\RAJ\SYS\profile\RAJ_JC01_sumt-hyd
-> lib path = PATH=F:\rajendra\Program Files\javasdk\jre\bin\server;F:\rajendra\Program Files\javasdk\jre\bin;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\Perl\bin\;C:\oracle\ora92\bin;C:\oracle\ora92\jre\1.4.2\bin\client;C:\oracle\ora92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\usr\sap\RAJ\SYS\exe\uc\NTI386
-> exe path = PATH=F:\rajendra\Program Files\javasdk\bin;F:\usr\sap\RAJ\JC01\j2ee\os_libs;f:\sapdb\programs\bin;f:\sapdb\programs\pgm;F:\Perl\bin\;C:\oracle\ora92\bin;C:\oracle\ora92\jre\1.4.2\bin\client;C:\oracle\ora92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;F:\usr\sap\RAJ\SYS\exe\uc\NTI386
[Thr 5800] Mon Apr 09 13:56:58 2007
[Thr 5800] *** ERROR => invalid return code of process [bootstrap] (exitcode = 66) [jstartxx.c 1642]
[Thr 5800] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = 66)
[Thr 5800] JControlCloseProgram: started (exitcode = 66)
[Thr 5800] JControlCloseProgram: good bye... (exitcode = 66)I have same problem ,does anybody know the solution ,any idea
-
I downloaded <i>Sneak Preview SAP NetWeaver </i>from
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
The system requirements in that page says windows xp prof sp1 is supported.
But the downloaded package help, windows xp prof sp1 is not listed in the supported OS list.
I tried to install in windows xp prof sp2, the installation aborted, the main error was getdomaincontroll returned null.
Please let me know if any one has installed <i>Sneak Preview SAP NetWeaver</i> in windows xp prof sp2.
ThanksHi Manesh
Make sure that u are selecting local installation.and yes u need to install loobback adapter because it needs a static ip and through router u cannot assigned static ip. so just install microsoft loopback adapter, enter the host name and ip in ur windows\system32\drivers\ets\hosts file,when u finished ur installations then u can connect through router too.
Hope it helps
Regards
Subhash
Maybe you are looking for
-
How can i transfer money from one itunes account to another
any way to use my husbands itune money to purchase an app for my phone with my account
-
How to have an international keyboard
I m new to mac and I don't know at all how to have accentued characteres with my keyboard :-( thanks
-
Automatic clearance of existing Credit memo from Lockbox
Hi All, I am trying to implement a scenario where The credit memo is already existing in the system when user executes the uploads and executes the Lockbox file system should automatically clear the credit memo. Currently its just doubling the amount
-
Requery form data block is empty after updating notification attributes
Hello, we build a form to approve/reject open WF notifications. The form data block is based on wf_notifications, wf_local_user_roles, wf_notification_attributes and wf_comments and some additional PSB tables. We use the following API's to perform th
-
Since upgrading iTunes earlier on today I've had problems, and now, my entire system has frozen. I still have keyboard and mouse functionality and the programs that were running are still there but I cannot get to any menu. How can I power down the i