Problems in using Msync with IPAQ 3760 and Active SYnc 3.5

Hi,
Environment :-
IPAQ 3760
Windows NT workstation
Active Sync 3.5
I am using Active Sync 3.5 which does not need RAS
configuration on the machine.
I am unable to run msync.exe. It does not give any errors
messages.
The 9i lite documentation talks about RAS settings.
If anyone has faced similar prob coudl you please let me know
the solution.
regards,
Sonal

You do not need to make a RAS connection with Pocket PC 2002,
because now ActiveSync itself makes an IP connection, and
Oracle9i Lite just needs an IP connection for synchronization no
matter how you establish it. Hi, I also experience the same problem. Using PocketPC 2002 I have a pasthru connection. Ik kan browse on the Internet with Internet Explorer, so the connections works.
mSync just seems to do nothing. When I press the Sync button, nothing happens (not even a progress bar).
Any idea?
Thanks,
Bas.

Similar Messages

Problems tethering using wifi with Twist laptop and iphone

Hello,
I have a Twist and works fine, although I have recently moved to an iphone 6. The phone and laptop combination has problem tethering over wifi, with tethering enabled on the phone, the laptop does not find the wifi signal. Asking a colleague to see if my phone is broadcasting an SSID, which it was. The laptop just doesn't want to find my iphone wifi signal. However, finding any wifi broadcast from a router, it finds it first time!
Since it was a new phone, I have been speaking with apple a lot and have even replaced the iphone, although problems still persist.
I am starting to think it is the lenovo twist laptop. I have checked the drivers and I have the latest ones which are on the lenovo website because the program used to update the software doesn't ask me to install a new driver, but looking at the wifi driver within the device manager it is dated: 13/08/2012. with driver version #: 6.20.55.55.
I have the 2x2 11a/b/g/n Wireless LAN PCI Express Half Mini Card Adapter and is based on the Broadcom chipset.
Do any of you have this problem? Also, where can I obtain the very latest driver for this as I would suspect it is likely to be a driver issue or I would like to rule this out first.
Many thanks.
Solved!
Go to Solution.

Thanks for the progress report.
If things remaIn stable, please do come back and mark you post as the solution. It may help other members.
Thanks.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. Did you saw this problem?

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?

It seems there's a workaround here:
https://discussions.apple.com/thread/5566037?tstart=0

I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

There is no more LiveType with Motion 5. You may want to go to the Final Cut Express forum, as that's the only place it's existed for the last few years.

How can I use LCCS with ActionScript 3 and Flash CS4?

Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

Thanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
>

Using Icloud with Outlook 2007 and windows 7, I cannot get my calendar to list the scheduled appointments as it used to do before I cloud. The to do bar just shows no upcoming appointments when my calendar is filled with them. How do I fix this

Since using ICloud with Office 2007 and Windows 7, the to-do-list will not show any appointments. If has the notation that no appointments are available? My calendar is full of appointments. How do I correct this?

I don't have a password on my phone. After attaching the phone to the Windows 7 computer, my DCIM folder is always empty. Here's the solution: While the phone is plugged in to the computer, pick it up and select the Photos application. A dialog box appears and asks if you trust this computer. Obviously, select the "Trust" option. Then the photos will download. If you have a password on your phone, I'm guessing you have to enter it before you open the photo application.

I am using Firefox with OS X and suddenly I lost the slot in which I type URL's in the top of the browser. How can I get it back?

I am using FIREFOX with OS X and suddenly I lost the slot at the top of the browswer in which to type the URL's. It just disappeared.
How can I get it back?

View --> Toolbars --> Navigation Toolbar

I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.

I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.

You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
http://support.apple.com/kb/ht4108
 Cheers, Tom

Integrtion Scenario using BPM with two sender and multiple receiver

integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?

Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech

I have a new ipad which needs itunes 10.7 or later to download my music onto it... but my ipad is not compatible with this as it is too old... can i use itunes with this ipad and apple laptop?

I have a new ipad which needs itunes 10.7 or later to download my music onto it... but my apple laptop is not compatible with this as it is too old... can i use itunes with this ipad and apple laptop?

To use itunes 10.7 you need to have Snow Leopard operating system installed
These are the system requirements
System Requirements:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
If you can run Snow Leopard you need to purchase it
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help.

10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help. I really just need mail file and desktop files recovered.

If data were on the SSD drive with TRIM - practically no chance. If HDD - use DIY recovery software such as DiskDrill or DataResue.
As quickly as possible turn off the drive where deleted data.
Use an external HDD with installed OSX for data recovery.
Alex
Apple Certified Support Professional

TS1398 I have an original iPad 32 why can't I connect on my home wi-fi but can connect anywhere else. No problems at home connect with other iPads and MACs.

I have an original iPad 32 why can't I connect on my home wi-fi but can connect anywhere else? No problems at home connect with other iPads and MACs.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have just purchased an Apple Magic Trackpad. I connected it to my Macbook to test it. Fine. But I want to use it with my IMac - and my IMac cannot discover it - even though it is turned on and the batteries are 100%. Why?

I have just purchased an Apple Magic Trackpad. I connected it to my Macbook to test it. Fine. But I want to use it with my IMac - and my IMac cannot discover it - even though it is turned on and the batteries are 100%. Why? Can I reconfigure it to the IMac?

Remove it from the Macbook first. BT devices may only be connected to one thing at a time.
Barry

PM Order Confirmation using Personnel's Cost Center and Activity Type

Hi All,
Is it possible to have PM Order confirmation (IW41) using Cost Center and Activity type from Personnel instead of default from Work Center? If it is, can it be done with some configuration or user exit? Please advise. Thank you.
Dai

Hi friend,
Order confirmation will be done for order operations.While doing confirmation we post the actual work done by the repective work center and respective activity type assigned to the same workcenter.
But these activity types are assigned to cost center for cost calculation.confirming the respective operation in maintenance order through workcenters gives the report of planned work and actual work done by the respective workcenter.
We cannot confirm the operation using costcenter and activity type directly through transaction IW41.
If you want to develop new confirmation screen and making confirmation of the respective order operation with only costcenter and activity type fields, you can do it .
Regards,
Pardhreddyc
Edited by: Pardhreddyc on May 17, 2011 12:45 PM

My ipad has latest iTunes (11.1) but iTunes on my computer (mac 10.5.8) is now no longer compatible with ipad software and cannot sync.

My ipad has latest iTunes (11.1) but iTunes on my computer (mac 10.5.8) is now no longer compatible with ipad software and cannot sync. The same error message appears saying my computer needs to update software, but my mac has the latest software available (albeit rather old). Can I undo the software update on ipad??? Thanks

Thanks for your response, Niel. Is there no way of removing the last update from my ipad????
Appreciate your help
James

Problems in using Msync with IPAQ 3760 and Active SYnc 3.5

Similar Messages

Maybe you are looking for