Problems in Z Reports in ECC 6.0
Hi,
We r upgrading the SAP from 4.7 E to ECC 6.0 and facing few problems in Z Reports in New Version..Like...
1)..Incorrect value in the dynamic table..
2)..Literals that take up more than one line not permitted.
3)..Missing parameter with PERFORM.
4)..Error in ASSIGN statement in program "SAPLSDSD".
5)..Not Unicode Convertible.
Please help me out of these problems..
Regards,
Anil
Hi,
regarding your problems the solution is that in ECC 6.0 the programs should be unicode compatible.the fields which are declared with type
were no more allowed in 6.0.
regarding unicode u can check the following threads..
What is the Use of Unicode Check
SDN Wiki - Standard Reference for Unicode Migration-Common ABAP Errors & Solution
SDN Wiki - Standard Reference for UNICODE PROBLEMS and SOLUTIONS
Similar Messages
-
Download problems in ALV report in ECC 6.0
Hello All,
While downloading ALV report to excel/txt by standard method.(Export> Local File> Spreadsheet)
I am facing an issue where I am getting 2 decimal places to a figure.
Where I do not require zeros if not necessary.
Eg. If the amnt is 200 then currently its showing like 200.00 but I want it like 200 only.
The type is char only.
Kindly please advice me how to overcome this problem.
Thanks,
Yogesh.Hi Yogesh,
ALV behaves inconsistent: I used excel inplace function and got exactly what you required, even worse: In the grid, I have always 3 decimal places, in excel I got a maximum of 2 decimal places, one if there was only one and none if in grid it was .000.
No obvous solution.
You could create the grid cells as strings and remove all trailing zeros.
Regards,
Clemens -
Error while RRI from BW reports to ECC CJI3 transaction
Hi All,
When we try to set up RRI from BW reports to ECC CJI3 transaction, we get an error message (Stop message):
You cannot use the report-report interface to call up report RKREP000
Diagnosis
Line Item report RKPEP000 is not suitable for the report/report interface
Procedure
Always enter RKPEP000 as the receiver report for project line items in the report/report interface. This program uses the transfer parameters to determine which line item reports can be accessed.
<b>As per the other reply tried the ABAP Report RKPEP000/3 also ..no use ..
can you please suggest , how to go about this CJI3 issue for RRI , what settings need to be done in the RSBBS ...</b>
We have attemped to use "S_ALR_87013543" as well but the parameters don't go through properly which means when a user jumps from a BW report, they end up at the ECC selection screen of S_ALR_87013543.
Drill through is working for our Cost Center reports. Just not this one in particular.
Any advice would be greatly appreciated.
prasadHi,
I'm facing the same problem so please If you have found some solution please tell me what should I do to use RRI from BEX query to CJI3 transaction.
Regards,
Ana -
Report Painter ECC 6.0 Issue.
We are running on ECC 6.0 and we are having a very critical problem in
a report painter report.This issue is very urgent for us here.
The description is as follows:
We are running a Report Painter report in GR55 and executing it.The
report has cost center data on the different company codes which are
the columns in the report. Somehow we are getting the same data
displayed for all the company codes.
Initially when i tried to run the report , it gave me the message
Message no. KCRP026
Characteristic 'BUKRS' does not exist and will be deleted from the form.
In our previous version 4.6c we never had any problem.This problem came
after the upgarde was done.
Thanks
srikanth.Hello,
you did not provided enough information but I guess you
should check first of all in your library (1VK?) if the char
is flagged or not... probably you did that in your previous release
br, -
Problem during hierarchy load from ECC 6.0 to BW
Hello,
I encountered a problem during hierarchy loads from ECC to BW:
I get the following in BW:
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
Once I go into ERP and look at the IDocs I get the following message:
Idoc Error 26:
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment E1RSSH does not occur at the current level of the basic type (extension ).
This error can have several reasons:
The segment E1RSSH is assigned to a group whose header segment does not occur.
The segment E1RSSH does not exist in the syntax description of the basic type (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type (extension ).
Can anyone help?The most basic setting in a BW system is its connectivity with the R/3 system (which is a basis team activity, but BI consultant can always help).
Issue: While creating source system, I am getting an error "Segment E1RSSH does not exist".
Diagnosis
Segment E1RSSH is in the syntax description, but it does not exist.
The issue was that some of the entries in the table EDISEGMENT were missing.
As this a standard table, it is recommended to restore the table from Backup or from another BI system. (Please ask your basis team to do it.)
Now, the significance of the segments: We all know that we require 3 message types in total to communicate with R/3 system. RSRQST, RSSEND and RSINFO.
Now each of the message types has some segments which help in communication.
You can see this segment types in the t-code we30. Just enter the basic idoc type and click on display.
This error is not a common error, but can be useful if at any stage of implementation or support, the table gets disturbed and you have issues with source system connectivity.
Thanks
SM -
Hi Friends,
I have the following 2 problems in ALV report
1) Logo is not getting displayed in the report.
2) When i click on the Purchase order number in the report the interactive report is not working,i am not able to see report of First interactive level.
can you help it out friends.
Thanks and regards
Dinesh
REPORT YSDBALV1
tables: ekko , ekpo .
type-pools: slis .
Table for Display Header
data:i_header type slis_t_listheader with header line.
*Fieldcat Declaration
data:fieldcatalog type slis_T_fieldcat_alv WITH HEADER LINE.
*Table of Events
data:i_event type slis_t_event with header line .
For Layout
data:i_layout type slis_layout_alv .
data: text(30) .
*Internal Table Declaration
data: begin of it_final occurs 0 ,
ebeln like ekko-ebeln , "Purchasing Document No.
bedat like ekko-bedat , "Purchasing Document Date
matnr like ekpo-matnr , "Material No.
netwr like ekpo-netwr , "Net Order Value in PO Currancy
meins like ekpo-meins , "UOM
chk(1) ,
light(1) ,
change like ekpo-menge ,
end of it_final .
**select option Declaration
selection-screen begin of block block.
select-options: s_ebeln for ekko-ebeln .
selection-screen end of block block .
selection-screen begin of block block1 .
parameters:grid radiobutton group r .
parameters:list radiobutton group r .
selection-screen end of block block1 .
at selection screen
at selection-screen .
select single * from ekko where ebeln in s_ebeln .
if sy-subrc <> 0 .
message e000(8I) WITH 'No Data Exists' .
endif .
start-of-selection .
if grid = 'X' .
perform get_data .
perform event using i_event[] .
perform field using fieldcatalog[] .
perform layout using i_layout .
perform grid_display .
endif .
*& Form get_data
text
--> p1 text
<-- p2 text
form get_data .
*DATA Retrieval from tables
SELECT EKKO~EBELN
EKKO~BEDAT
EKPO~EBELP
EKPO~MATNR
EKPO~NETWR
EKPO~MEINS
EKPO~MENGE
EKPO~BPRME
INTO CORRESPONDING FIELDS OF table IT_FINAL
FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
WHERE EKKO~EBELN IN S_EBELN.
APPEND IT_FINAL.
endform. " get_data
*Getting the Event for Top of Page display.
*& Form event
text
-->P_I_event[] text
form event using p_i_event type slis_t_event.
clear p_i_event .
refresh p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = p_i_event
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
read table p_i_event with key name = slis_ev_top_of_page into i_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE_PO' to i_event-form.
modify p_i_event from i_event index sy-tabix transporting form.
endif.
clear i_event.
endform. " event
*Display Top-of Page Details and Logo
form top_of_page_po .
clear i_header .
refresh i_header .
write sy-datum to text.
i_header-typ = 'H'.
i_header-info = 'PURCHASE OREDER DETAILS'.
append i_header.
*Logo Display
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_header[]
I_LOGO = 'ENJOYSAPLOGO'.
endform .
*Field Catalog Append
*& Form field
text
-->P_fieldCATALOG[] text
form field using p_fieldcatalog type slis_t_fieldcat_alv.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order No'.
fieldcatalog-col_pos = 1.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'BEDAT'.
fieldcatalog-seltext_m = 'PO Date'.
fieldcatalog-col_pos = 2.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material No'.
fieldcatalog-col_pos = 4.
fieldcatalog-outputlen = 20.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'NETWR'.
fieldcatalog-seltext_m = 'Net Value '.
fieldcatalog-col_pos = 5.
fieldcatalog-outputlen = 20.
fieldcatalog-do_sum = 'X'.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Units'.
fieldcatalog-col_pos = 6.
fieldcatalog-outputlen = 4.
append fieldcatalog .
clear fieldcatalog.
endform. " field
*& Form layout
text
form layout using p_i_layout TYPE SLIS_LAYOUT_ALV .
i_layout-zebra = 'X'.
i_layout-lights_fieldname = 'LIGHT'.
i_layout-lights_tabname = 'IT_FINAL'.
i_layout-box_fieldname = 'CHK'.
i_layout-box_tabname = 'IT_FINAL'.
i_layout-edit = ' '.
endform.
*To display Buttons in the MENU BAR if needed
FORM SET_PO_PF_STATUS USING P_I_EXTAB TYPE
SLIS_T_EXTAB.
SET PF-STATUS 'MENUPO'.
ENDFORM.
*Event for Interactive display of ALV report
form USER_COMMAND using r_ucomm like sy-ucomm
rs_selfield type slis_selfield .
if r_ucomm = '&IC1'.
READ TABLE IT_FINAL index rs_selfield-tabindex.
write:/ IT_FINAL-ebeln.
endif.
endform .
*Parameters of FM REUSE_ALV_GRID_DISPLAY
*& Form grid_display
text
--> p1 text
<-- p2 text
form grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PO_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = FIELDCATALOG[]
IT_EVENTS = I_EVENT[]
TABLES
t_outtab = IT_FINAL.
endform. " grid_display*& Report YSDBALV1
REPORT YSDBALV1.
tables: ekko , ekpo .
type-pools: slis .
Table for Display Header
data:i_header type slis_t_listheader with header line.
*Fieldcat Declaration
data:fieldcatalog type slis_T_fieldcat_alv WITH HEADER LINE.
*Table of Events
data:i_event type slis_t_event with header line ,
wa_event type line of slis_t_event.
For Layout
data:i_layout type slis_layout_alv .
data: text(30) .
*Internal Table Declaration
data: begin of it_final occurs 0 ,
ebeln like ekko-ebeln , "Purchasing Document No.
bedat like ekko-bedat , "Purchasing Document Date
matnr like ekpo-matnr , "Material No.
netwr like ekpo-netwr , "Net Order Value in PO Currancy
meins like ekpo-meins , "UOM
chk(1) ,
light(1) ,
change like ekpo-menge ,
end of it_final .
**select option Declaration
selection-screen begin of block block.
select-options: s_ebeln for ekko-ebeln .
selection-screen end of block block .
selection-screen begin of block block1 .
parameters:grid radiobutton group r .
parameters:list radiobutton group r .
selection-screen end of block block1 .
at selection screen
at selection-screen .
select single * from ekko where ebeln in s_ebeln .
if sy-subrc <> 0 .
message e000(8I) WITH 'No Data Exists' .
endif .
start-of-selection .
if grid = 'X' .
perform get_data .
perform event using i_event[] .
perform field using fieldcatalog[] .
perform layout using i_layout .
perform grid_display .
endif .
*& Form get_data
text
--> p1 text
<-- p2 text
form get_data .
*DATA Retrieval from tables
SELECT EKKO~EBELN
EKKO~BEDAT
EKPO~EBELP
EKPO~MATNR
EKPO~NETWR
EKPO~MEINS
EKPO~MENGE
EKPO~BPRME
INTO CORRESPONDING FIELDS OF table IT_FINAL
FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
WHERE EKKO~EBELN IN S_EBELN.
APPEND IT_FINAL.
endform. " get_data
*Getting the Event for Top of Page display.
*& Form event
text
-->P_I_event[] text
form event using p_i_event type slis_t_event.
clear p_i_event .
refresh p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = p_i_event.
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
read table p_i_event with key name = slis_ev_top_of_page into wa_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE_PO' to i_event-form.
modify p_i_event from i_event index sy-tabix transporting form.
endif.
clear i_event.
endform. " event
*Display Top-of Page Details and Logo
form top_of_page_po .
clear i_header .
refresh i_header .
write sy-datum to text.
i_header-typ = 'H'.
i_header-info = 'PURCHASE OREDER DETAILS'.
append i_header.
*Logo Display
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_header[]
I_LOGO = 'ENJOYSAP_LOGO'.
endform .
*Field Catalog Append
*& Form field
text
-->P_fieldCATALOG[] text
form field using p_fieldcatalog type slis_t_fieldcat_alv.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order No'.
fieldcatalog-col_pos = 1.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'BEDAT'.
fieldcatalog-seltext_m = 'PO Date'.
fieldcatalog-col_pos = 2.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material No'.
fieldcatalog-col_pos = 4.
fieldcatalog-outputlen = 20.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'NETWR'.
fieldcatalog-seltext_m = 'Net Value '.
fieldcatalog-col_pos = 5.
fieldcatalog-outputlen = 20.
fieldcatalog-do_sum = 'X'.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Units'.
fieldcatalog-col_pos = 6.
fieldcatalog-outputlen = 4.
append fieldcatalog .
clear fieldcatalog.
endform. " field
*& Form layout
text
form layout using p_i_layout TYPE SLIS_LAYOUT_ALV .
i_layout-zebra = 'X'.
i_layout-lights_fieldname = 'LIGHT'.
i_layout-lights_tabname = 'IT_FINAL'.
i_layout-box_fieldname = 'CHK'.
i_layout-box_tabname = 'IT_FINAL'.
i_layout-edit = ' '.
endform.
*To display Buttons in the MENU BAR if needed
FORM SET_PO_PF_STATUS USING P_I_EXTAB TYPE
SLIS_T_EXTAB.
SET PF-STATUS 'MENUPO'.
ENDFORM.
*Event for Interactive display of ALV report
form USER_COMMAND using r_ucomm like sy-ucomm
rs_selfield type slis_selfield .
if r_ucomm = '&IC1'.
READ TABLE IT_FINAL index rs_selfield-tabindex.
set parameter id 'VL1' field it_final-ebeln.
call transaction 'ME23N'.
endif.
endform .
*Parameters of FM REUSE_ALV_GRID_DISPLAY
*& Form grid_display
text
--> p1 text
<-- p2 text
form grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PO_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = FIELDCATALOG[]
IT_EVENTS = I_EVENT[]
TABLES
t_outtab = IT_FINAL.
endform. " grid_display
Regards,
Rusidar S. -
Problems accessing BW Report from Portal
Hello friends,
I have a problem. I am trying to create a link in portal that should call a BW Report. To do this we should require the query string which I have. The problem is this report in turn is calling a separate transaction code from a different back end system. When the user tries to execute the report he is getting the following error code
ICF-NF-http-c:000-u:SAPSYS-I:E-i:wwbsap06_DEV1_22-v:0-s:403-r:Forbidden
Can anyone tell me how this can be achieved?
Points guaranteed.
Thank You
AvikYou can use SAP Web dispatcher for exposing the BW web reports to extranet. The SAP Web dispatcher is located between the Web client (browser) and your SAP system that is running the Web application.
http://help.sap.com/saphelp_nw04/helpdata/en/42/5cfd3b0e59774ee10000000a114084/content.htm -
Problem in exporting report in CSV format
Hi All,
I am using Crystal Reports. Following are details about it:
CR Developer
Product 8.5.0.217
*_Problem that I am facing:__*_
I can create report in .rpt format, it is working fine here. But while trying to export this report in CSV format, it gives report that doesn't contain any information.
Is it because I am missing something or it is a known issue?
Thanks and Regards,
AnandHi,
I too am facing the same problem.
The report was made in 8.5. I have exported the report & opened it in Crystal report 12.
I can export to PDF, RTF, DOC & Tab separated Test.
However when I export this report in .csv (legacy mode) I just get the header & when I export it in .csv (Standard) I get a blanck .csv file.
I have checked 'Isolate Report/Page sections' and 'Isolate Group sections'. Still no data in the report.
refreshed it too.
I contains sub reports, but not in the page header & footer (I think) & it does not seem to have cross tabs & OLAP grids.
Any help is appreciated.
Links to Screenshots:
Main Report:
http://picasaweb.google.com/lh/photo/yM9sBexKt5jW9soqaMmHjw?feat=directlink
One of the Sub-Report:
http://picasaweb.google.com/lh/photo/0ofa5sABakvZ-nFZp-JSMw?feat=directlink -
Problem in Crystal Report 2008 selectionFormula
Post Author: saro_j
CA Forum: Crystal Reports
Hi,
I am having a strange problem in Crystal report 2008. Earlier I was using VS 2005 Crystal report. Then we purchased Crystal report 2008.
When I open the VS 2005 projects it asks the reports to convert into Crystal report 2008. I did that.
Earlier I was using the following syntax for passing the date as selectionFormula
Dim selectionFormula As String = "{tblClient.Name} = '" & ddlClient.SelectedItem.Text & "' and {TBILL_File_Format.Week Ending Date} = #" _& Convert.ToDateTime(DtCtrlProDateFrom.DateTimeValue) & "#u201D WeeklyReportByClientNameReport.DataDefinition.RecordSelectionFormula = selectionFormula
But now when I run this same it says
This field name is not known. Details: errorkind Error in the file rptWeeklyReport.rpt: Error in formula Record_selection:
u2018{tblClient.Name} = 'ABC10' and "{TBILL_File_Format.Week Ending Date} = #04/20/2008#u2019 This field name is not known. Details: errorkind
I have no idea about this
Even If I tried to pass as follows
selectionFormula = "{TBILL_File_Format.Week Ending Date} = DateTime (2008, 04, 25, 00, 00, 00) and {TBILL_File_Format.Client Code} = 'ABC10' "
I couldnu2019t see any record on the report except Grouptree of the report. If I export the report it has all the data as I expected.
Please help me out on this regards.
Thanks in advance
SaravananPost Author: jehanzeb
CA Forum: Crystal Reports
Hello,
I use CR2008 and VS2005, it never asked me to convert the file into VS2005. What do you mean by VS 2005 asked you to convert the file? Did you make the file in CR2008 and then imported it into VS2005 as a Report Document?
I usually create a report on CR2008 and then move that report (copy) to the same folder as VS project folder, then from there I create a new Report Doc in VS and open the file.
As you mentioned when you export the report it works fine but when you run it it gives errors. I think it is because of the import of the report. Look at the error message as it says the field name is not known, I suspect it is not connected/imported properly.
"This field name is not known. Details: errorkind Error in the file rptWeeklyReport.rpt: Error in formula Record_selection:
u2018{tblClient.Name} = 'ABC10' and "{TBILL_File_Format.Week Ending Date} = #04/20/2008#u2019 This field name is not known. Details: errorkind"
I think it is becasue of the import of the report or could be becasue you didnt save the report with an option of "save report data". Check your report and reimport it. might fix the problem:D -
I've checked my current plugins and it still shows Adobe Acrobat Version 7 for Netscape (7.0.9.50)
I tried to do the update but I get the same error each time - "Please tell Microsoft about this problem" "Send Error Report/ Don't Send".
Also, do I need to Disable or Uninstall the Extension: "SEO For Firefox 3.3.4 as this was highlighted?
== This happened ==
Every time Firefox opened
== When I try to do the updatehttp://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359 -
Problem showing BI report in SAP CRM 7.0
Problem showing BI report in SAP CRM 7.0
We are facing a problem in our SAP CRM, when we show a BI report in the fact sheet we can see the report correctly.
But when we click on the match code of the query, (in order to choose a value from the help) the popup does not appear and we got the error u201Caccess denied popup_ie6.jsu201D
Any help?
Thank you in advance.Hi,
Please check the service patch for BW.
In our S/m it is working Fine.
SAP_BW 701 0003 SAPKW70103 SAP Business Warehouse
BI_CONT 704 0003 SAPK-70403INBICONT Business Intelligence Content
Regards,
Lokesh. -
Problem in absent report(ABAP-HR)
Hi to all
I am getting a problem in Absent report.(HR-ABAP)
Absent report shows next day irregular punch in case of 'C' shift(Timing 10:30 PM to 6:30 AM) at the end of month.
It happens only at the end of month like 31/10/2007 because in selection we gave
1/10/2007 to 31/10/2007.
Plz tell me what to do.
Regards
AnubhavHi,
It is not possible to run RBDMIDOC Report in Insert mode, precisely the purpose of this report is to send only the delta changes recorded in change pointers (that is only the differences since the last replica) and it is used not just for HRMD_ABA Message Type, also for other Modules, like Cost Center, Materials, etc.
I understand that PFAL is not useful as it requires the specification implied of the objects.
According with the way HR structure Replica works, you replicate with PFAL all the objects you requiere as an initial replica, and then programs BD21 as a job to get the delta changes in the destination system.
Regards,
Edith -
Integration crystal report with ecc
hi experts
i am not similar to crystal report,i wanna know if we can develop the crystal report in ECC directly,i find some forums all about bi,crystal report just can integrate with BI?
also i need some detail documents ,please help me,thanx all
best regards
zlfDo not cross post.
Read the "Rules of Engagement"
Regards
Juan -
Date format Problem in forms&reports Services 10g
Hi Dears,
I Faced a problem during running reports ( i am using forms& Reports Services 10g), when i pass the parameters via parameter form to the report (built in forms10g Rel 2.0) its appearing in arabic like (25-يناير-2010) as my Date Formate is (DD-YYYY-MON) and NLS_LANG parameter is defined as Arabic_Saudi arabia.AR8MSWIN1256 so as a result report is not running due to unknown Date formate, how can i change the Same Date format (DD-YYYY-MON) to appear in english like (25-2010-JAN)
ThanksYou could specify the parameter as type VARCHAR2, explicitly cast it (maybe to DD.MM.YYYY) when you pass it from forms and cast it back in your query, like TO_DATE(:P_PARAM, 'DD.MM.YYYY')
-
How to solve problem :- rep-188-Report Server acccepts only Batch jobs
How to solve problem :- rep-188-Report Server acccepts only Batch jobs
Report server :- 10gR1Hello,
Could you give us some details about the command line ?
What is the value of DESTYPE ?
Regards
Maybe you are looking for
-
Ipod shuffle not recognized in windows 7
I bought a new 2gb ipod shuffle 4th gen on friday, as my 120gb classic was stolen, and i have been having massive problems with it. Whenever I attach it to the USB port (tried in all 4) it only comes up with a box in the bottom right of windows sayin
-
All my songs on Itunes display an exclamation point and message comes up song can't be used because original file cannot be located. this occurs even for my purchased music. Is there a fix or a way to get my music back?
-
SO Opening Balances Migration - Implementation
Hi Gurus, I am in migration of pen sales order / Open Purchase Orders from legacy system to Oracle system. Cut-off date they provided open SO/POs. Please clarify below doubts: 1. Few line are shipped partially, how to enter partially shipped sales or
-
When to clone both appl and Db.
Hi, I have 10g DB and R12.0.6 ebs PROD we use to clone TEST instance as of PROD when developers or consultants request for a TEST instance same as PROD. My Question is. What are the scenario in which : 1)I need to clone only DB and just run autoconfi
-
Why Does My Mouse Slow Down?
Lifetime Windows user recently switched to Mac. I plugged in a USB mouse and as I get close to whatever I am looking to click on and naturally slow down, the cursor slows down exponentially. I read something about this being how macs are, but want to