Problems installing 8.1.7 Enterprise Developer

Hi,
we got a new machine (Pentium IV, Win2k, SP2) and I can't install this Oracle version. The setup program doesn't even start.
On the previous machine (Pentium III, Win2k, SP1) there was no problem.
So I installed the new machine without SP2 but this didn't helped.
I think the problem is the Pentium IV.
Has anyone else this problem and maybe a solution?
TIA
Alex

hello,
please contact oracle support services. there are some known issues with the java-environment used and pentium IVs .
regards,
the oracle reports team --pw

Similar Messages

Problem installing 10.1.3.1 Developer Preview

Anyone else run into this problem?
When trying to install SOA Suite 10.1.3.1 the installer gets to the "Oracle Process Management and Notification Configuration Assistant" and hangs at the opmnctl reload step. I've tried to manually run opmnctl reload / status / startall but the system just hangs. I'm running Windows XP SP2.
Any ideas?
Thanks
==============================
Output generated from configuration assistant "Oracle Process Management and Notification Configuration Assistant":
C:\oracle\product\10.1.3.1\OracleAS\opmn\bin\opmnctl.exe start reload restartproc
Launching C:\oracle\product\10.1.3.1\OracleAS\opmn\bin\opmnctl.exe start
opmnctl: opmn already running
reload status 0
Launching C:\oracle\product\10.1.3.1\OracleAS\opmn\bin\opmnctl.exe reload

Engineering has identified the underlying cause of this issue. It appears to be caused by some inappropriate TCP stack behavior from some networking DLLs. Specifically those provided by wireless network card providers. We have seen it with laptops with Sprint, Cingular and Verizon wireless cards, though it is possible that other networking software could cause it as well.
We are:
1) Modifying our installer so as to not encounter this problem. So the GA release of the Oracle SOA Suite installer will not suffer from this issue.
2) Trying to work around this in the core opmn layer so as to fix this at all levels.
3) Planning to provide instructions for how to work around this issue in the meantime.
If anyone on this list has installer issues that have a symptom other than causing the installer to hang at the opmn config step, please post a description of your specific issue, ideally including your email address so we can follow directly for troubleshooting.
Thanks!
Dave
David Shaffer
Sr. Director Product Mgmt, Oracle Integration
[email protected]
W: 650.506.1729
http://otn.oracle.com/soa

Problem installing Download Java Web Services Developer Pack on ubuntu

I downloaded the .sh file, but when I try to run it, I get...
For help, type 'jwsdp-2_0-unix.sh -help'
Using /var/tmp as temporary directory...
Searching for Java(TM) 2 Platform, Standard Edition...
tail: cannot open `+368' for reading: No such file or directory
Initializing InstallShield Wizard...
Exception in thread "main" java.lang.NoClassDefFoundError: JWSDP
Caused by: java.lang.ClassNotFoundException: JWSDP
     at java.net.URLClassLoader$1.run(URLClassLoader.java:217)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:205)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:323)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:268)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:336)
Could not find the main class: JWSDP. Program will exit.I went through the troubleshooting guides, but none of the solutions worked...I'm also running an amd machine, which I don't think is supported...that may be part of the problem.
Is there a particular directory you should run this from?
bp

Hi Guys,
Please try the following command, I tried the same it is working fine on Ubuntu 8.10.
export POSIX2VERSION=199209
./jwsdp-2_0-unix.sh
I hope you will get it. thanks.
Regards,
Raju

Problem Installing Developer Suite on WIndows Vista

Hi! i'm a student of computer science, and i need to install developer suite for a proyect i need to do for one of my classes.
I have a problem installing developer suit on Windows Vista. After i download and unzip both disk, i run the setup from the installer folder and i get an alert that says: "abnormal termination. There's been an internal error. Send the following files to the Oracle Suport Services: Unknown, Unknow, Unknow". I've also tryed with the setup from the main folder and i get the same alert. I don't know what to do, i've tryed setting the compatibility mode to windows XP, runnig as administrator, changing the performance configuration of my computer and nothing. Please help me to install the program!

Which developer suite are you using???

Problem Installing Oracle Client 11g R2 64 bit on Windows 7 Enterprise 64

Hi,
I am having problems installing the Oracle Client 11g R2 64 bit installation on my Windows 7 64 bit Enterprise machine. The installer does all the checks successfully, it gets me to summary screen and I press finish to start the installation. It then opens the installation mask where it first says Checking whether Central Inventory is locked by another OUI session. After that it very briefly shows Central Inventory is not locked and then the window immediately dissapears with no other errors. I tried installing at my colleague's W7 Enterprise 64 machine and it behaves a little differently but with the same result. Basically on his machine it never even opens the Install mask, when pressing finish from the Summary it just disappears and never starts installation. I tried installing 11g R1 and that loads the first mask and when i press next it just dissapears. I basically need an oracle client 64 bit installation on my machine deperately. Please help. Thanks
Alex

One user above reported installing the 64 bit odbc drivers and then the 32 bit drivers. How did you do that? I'm a neophyte to this.
I'm trying to get a 32 bit ODBC oracle driver to work on a server 2008 R2 machine. I downloaded the 11gR2 x64 client from oracle. The install process makes no mention of 32bit vs 64bit installation. After running the instalation I can run the ODBC administrator and generate a DSN for oracle. When I run the 32 ODBC administrator there is no oracle driver available except the microsoft driver for oracle. When I select that it says that I need to install oracle.
I had at first tried to install 11g instant client. However that didn't work for the 2008 R2 machine. It complained about some registry error when I tried to run the ODBC install program. I need to get it to work for a customer asap.

Problems installing Netweaver Developer Workplace 2004

Dear Netweaver experts,
I have severe problems installing Netweaver Developer Workplace 2004 on windows XP.
I used sapinst for installing the Java sytem (Menue Java System->Oracle->Custom Installation).
After running through 34 of the 35 phases during which the sapinst tries to start the freshly installed J2EE engine I got the error :
CJSlibModule::writeError_impl() CJS-20057 Starting J2EE Engine J00 of SAP system J2E failed: after 84 s the state of the engine changed from "Starting" to "Stopped".
and changed my memory setting using the configtool.
Afterwards I tried to start the server in my MMC and it seemed to be running.
INFO
Execution of the command "D:\usr\sap\J2E\JC00\exe/startsap.exe 'name=J2E' 'nr=00' 'SAPDIAHOST=K-0017553'" finished with return code 0. Output: STARTSAP continues...
But when I had a closer look at the Process table at the MMC I saw that the server0 wasn't running
(Server 0 stopped Exit Code -2).
Now I don't know how to proceed.
Does someone of you know how I could get my J2EE server running ?
Below you find my present settings :
trc file: "D:\usr\sap\J2E\JC00\work\dev_server0", trc level: 1, release: "640"
node name   : ID3806050
pid         : 5496
system name : J2E
system nr. : 00
started at : Tue Dec 02 11:16:19 2008
arguments   :
    arg[00] : D:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
    arg[01] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC00_K-0017553
    arg[02] : -DSAPINFO=J2E_00_server
    arg[03] : pf=D:\usr\sap\J2E\SYS\profile\J2E_JC00_K-0017553
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties]
-> ms host    : K-0017553
-> ms port    : 3601
-> OS libs    : D:\usr\sap\J2E\JC00\j2ee\os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
Instance properties
-> ms host    : K-0017553
-> ms port    : 3601
-> os libs    : D:\usr\sap\J2E\JC00\j2ee\os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID3806000 : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID3806050 : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID3806000            : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
-> [01] ID3806050            : D:\usr\sap\J2E\JC00\j2ee\cluster\instance.properties
[Thr 5312] Tue Dec 02 11:16:19 2008
[Thr 5312] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 5312] JLaunchRequestQueueInit: create pipe listener thread
[Thr 4100] JLaunchRequestFunc: Thread 4100 started as listener thread for np messages.
[Thr 3328] WaitSyncSemThread: Thread 3328 started as semaphore monitor thread.
[Thr 5312] Tue Dec 02 11:16:20 2008
[Thr 5312] INFO: Invalid property value [JLaunchParameters/]
[Thr 5312] JStartupIReadSection: debug mode is specified by program arguments
[Thr 5312] [Node: server0] java home is set by profile parameter
     Java Home: C:\j2sdk1.4.2_18
JStartupIReadSection: read node properties [ID3806050]
-> node name       : server0
-> node type       : server
-> java path       : C:\j2sdk1.4.2_18
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -Dsun.io.useCanonCaches=false -XX:NewSize=170m -XX:MaxNewSize=170m -XX:MaxPermSize=192m -Djava.awt.headless=true -XX:PermSize=192m -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc -XX:DisableExplicitGC -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:UseParNewGC -Drdbms.driverLocation=D:/Oracle/Ofs33/jdbc/lib/classes12.jar -Dsys.global.dir=D:/usr/sap/J2E/SYS/global/
-> java vm version : 1.4.2_18-b06
-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type    : server
-> java vm cpu     : x86
-> heap size       : 1024M
-> init heap size : 256M
-> root path       : D:\usr\sap\J2E\JC00\j2ee\cluster\server0
-> class path      : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path    : D:\usr\sap\J2E\JC00\j2ee\os_libs
-> main class      : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : D:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters      :
-> debuggable      : yes
-> debug mode      : yes
-> debug port      : 50021
-> shutdown timeout: 120000
[Thr 5312] JLaunchISetDebugMode: set debug mode [yes]
[Thr 3648] JLaunchIStartFunc: Thread 3648 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack   : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: -Djava.security.policy=./java.policy
-> arg[ 3]: -Djava.security.egd=file:/dev/urandom
-> arg[ 4]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 5]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 6]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 7]: -Djco.jarm=1
-> arg[ 8]: -Dsun.io.useCanonCaches=false
-> arg[ 9]: -XX:NewSize=170m
-> arg[ 10]: -XX:MaxNewSize=170m
-> arg[ 11]: -XX:MaxPermSize=192m
-> arg[ 12]: -Djava.awt.headless=true
-> arg[ 13]: -XX:PermSize=192m
-> arg[ 14]: -XX:SurvivorRatio=2
-> arg[ 15]: -XX:TargetSurvivorRatio=90
-> arg[ 16]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 17]: -verbose:gc
-> arg[ 18]: -XX:+DisableExplicitGC
-> arg[ 19]: -XX:+PrintGCDetails
-> arg[ 20]: -XX:+PrintGCTimeStamps
-> arg[ 21]: -XX:+UseParNewGC
-> arg[ 22]: -Drdbms.driverLocation=D:/Oracle/Ofs33/jdbc/lib/classes12.jar
-> arg[ 23]: -Dsys.global.dir=D:/usr/sap/J2E/SYS/global/
-> arg[ 24]: -Dsys.global.dir=D:\usr\sap\J2E\SYS\global
-> arg[ 25]: -Dapplication.home=D:\usr\sap\J2E\JC00\j2ee\os_libs
-> arg[ 26]: -Djava.class.path=D:\usr\sap\J2E\JC00\j2ee\os_libs\jstartup.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 27]: -Djava.library.path=C:\j2sdk1.4.2_18\jre\bin\server;C:\j2sdk1.4.2_18\jre\bin;C:\j2sdk1.4.2_18\bin;D:\usr\sap\J2E\JC00\j2ee\os_libs;D:\Oracle\Ofs33\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\usr\sap\J2E\SCS01\exe;D:\usr\sap\J2E\JC00\exe;D:\usr\sap\J2E\SYS\exe\run
-> arg[ 28]: -Xdebug
-> arg[ 29]: -Xnoagent
-> arg[ 30]: -Djava.compiler=NONE
-> arg[ 31]: -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=50021
-> arg[ 32]: -Dmemory.manager=1024M
-> arg[ 33]: -Xmx1024M
-> arg[ 34]: -Xms256M
-> arg[ 35]: -DLoadBalanceRestricted=yes
-> arg[ 36]: -Djstartup.mode=JCONTROL
-> arg[ 37]: -Djstartup.ownProcessId=5496
-> arg[ 38]: -Djstartup.ownHardwareId=V0317565360
-> arg[ 39]: -Djstartup.whoami=server
-> arg[ 40]: -Djstartup.debuggable=yes
-> arg[ 41]: -DSAPINFO=J2E_00_server
-> arg[ 42]: -DSAPSTARTUP=1
-> arg[ 43]: -DSAPSYSTEM=00
-> arg[ 44]: -DSAPSYSTEMNAME=J2E
-> arg[ 45]: -DSAPMYNAME=K-0017553_J2E_00
-> arg[ 46]: -DSAPDBHOST=
-> arg[ 47]: -Dj2ee.dbhost=K-0017553
[Thr 3648] JLaunchIAbortJava: abort hook is called
[Thr 3648] JLaunchCloseProgram: good bye (exitcode=-2)

Dear Netweaver experts,
I found the solution.
I took for my system (Win XP, 2,5 GB RAM) the settings posted below :
Maximum heap size : 512 MB
-Djava.security.policy=./java.policy
-Djava.security.egd=file:/dev/urandom
-Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-Djco.jarm=1
-Dsun.io.useCanonCaches=false
-XX:NewSize=170m
-XX:MaxNewSize=170m
-XX:MaxPermSize=192m
-Djava.awt.headless=true
-XX:PermSize=192m
-XX:SurvivorRatio=2
-XX:TargetSurvivorRatio=90
-XX:SoftRefLRUPolicyMSPerMB=1
-Xms512m
-verbose:gc
-XX:+DisableExplicitGC
Best regards,
Daniel
-XX:+PrintGCDetails
-XX:+PrintGCTimeStamps
-XX:+UseParNewGC

When I try to install the 'GOOD for enterprise" app, I am getting error 0x100001 during retireve settings step. I followed the step of reloading the OS to fix this as suggested in another thread but even after that I have the same problem. Please help.

when I try to install the 'GOOD for enterprise" app, I am getting error 0x100001 during retireve settings step. I followed the step of reloading the OS to fix this as suggested in another thread but even after that I have the same problem. Please help.
Regards,
Nagarajan Kadhiresan

if you using the same port, maybe this issue caused by your kingmax
to make it fast, try your king max at other PC, if cant detect, please reformat your king max

Problem in Installing oracle 11g in enterprise linux

Hello all,
Iam new to linux and oracle .... I had downloaded enterprise linux from oraclewebsite, My question is i was not able to install oracle 11g in enterprise linux...
And when i am trying to install ./runInstaller
iam getting error message (permission denied).
is that necessary to install oracle vm server or manager .. if so how to do it .. Please give me clear idea how and where to start..

Hi,
The error message which iam getting is
[root@Karthik database]# ls -la
total 48
drwxr-xr-x 8 root root 4096 Sep 10 15:42 .
drwxr-xr-x 3 root root 4096 Sep 10 15:40 ..
drwxr-xr-x 12 root root 4096 Sep 10 15:42 doc
drwxr-xr-x 4 root root 4096 Sep 10 15:42 install
drwxr-xr-x 2 root root 4096 Sep 10 15:42 response
drwxr-xr-x 2 root root 4096 Sep 10 15:42 rpm
-rwxrwxrwx 1 root root 4352 Aug 13 23:56 runInstaller
drwxr-xr-x 2 root root 4096 Sep 10 15:42 sshsetup
drwxr-xr-x 14 root root 4096 Sep 10 15:46 stage
-rw-r--r-- 1 root root 5400 Aug 17 12:25 welcome.html
[root@Karthik database]# ./runInstaller
./runInstaller: line 137: /root/Desktop/linux_11gR2_database_1of2/database/install/.oui: Permission denied
The command
bash ./runInstaller.sh didnt helped. again got the error of bash: ./runInstaller.sh: No such file or directory
Thanks,
karthik

This problem appears while installing oracle 10g on enterprise linux

Hi All,
While installing oracle 10g on enterprise linux 5 this message apear:
http://img134.imageshack.us/my.php?image=problemqy2.png
More Info:
Oracle 10g supports redhat 4 and Enterprise Linux is redhat 5 so I changed the redhat-release to 4 to countinue setup but the above error appears, also I tried this configuration on SuSE 10 I changed the SuSE-release to 9 and went good.

The packeges are already installedIf you execute runInstaller again is the error message the same as before?
If yes can you post output for this command?
rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n'|grep -i 'libxp'

Problem Installing: Web Services Developer Pack 1.3

I am trying to setup an environment to develop and deploy a web application with jsp & servlets. When i tried to install the web services developed pack i got the following error found in the log file. I also just installed the j2sdk 1.4.2_03 and i have set my class path to the new java folder.
Any help would be great.
-Chris
(Feb 7, 2004 5:16:21 PM), Install.product.install, com.installshield.product.service.product.PureJavaProductServiceImpl, wrn, Parent Component with UID = a8182b517735a528d4f8baa8438a8985 of installed Component with displayName = JAXP Version 1.2.4 (Java API for XML Processing) was not found in the VPD.
(Feb 7, 2004 6:01:11 PM), Install.product.install, com.installshield.product.service.product.PureJavaProductServiceImpl$DiskSpaceCheck, wrn, String index out of range: -1
(Feb 7, 2004 6:01:30 PM), Install.product.install, com.sun.jwsdp.installer.SaveEnvironmentVariablesAction, err, An error occurred and product installation failed. Look at the log file /usr/jwsdp-1.3/log.txt for details.
(Feb 7, 2004 6:01:30 PM), Install.product.install, com.sun.jwsdp.installer.SaveEnvironmentVariablesAction, err, java.lang.NoClassDefFoundError
STACK_TRACE: 13
java.lang.NoClassDefFoundError
     at com.sun.jwsdp.installer.SelectJVMPanel.<init>(SelectJVMPanel.java:85)
     at com.sun.jwsdp.installer.SaveEnvironmentVariablesAction.install(SaveEnvironmentVariablesAction.java:177)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:1916)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:5149)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(InstallableObjectVisitor.java:369)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(InstallableObjectVisitor.java:333)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:133)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4532)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3727)
     at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:40)
     at java.lang.Thread.run(Thread.java:534)
(Feb 7, 2004 6:01:31 PM), Install.product.install, com.installshield.product.service.product.PureJavaProductServiceImpl, wrn, Parent Component with UID = a8182b517735a528d4f8baa8438a8985 of installed Component with displayName = JAXP Version 1.2.4 (Java API for XML Processing) was not found in the VPD.
My screen output when i got the error
Installing Java(TM) Web Services Developer Pack 1.3. Please wait...
|-----------|-----------|-----------|------------|
0% 25% 50% 75% 100%
|||||||||||||||
Errors occurred during the installation.
- An error occurred and product installation failed. Look at the log file
/root/jwsdp-1.3/log.txt for details.

Look at the log file /usr/jwsdp-1.3/log.txt for details.Doesn't the log file tell you what's wrong? From the error messages, the installer (InstallShield?) couldn't find some class. Review all of the install instructions, paying particular attention to the setting of environment variables like PATH and CLASSPATH, etc. You might want to check at the Installshield site for further information, also.

I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.

I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.
4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM
54e24e0e-dfc4-466b-a347-4bd95536773e03-Jan-1312:30 AM
22d351d2-6461-4f33-9fbd-6d31f769e73103-Jan-1312:30 AM
8a8da99b-335e-43bb-aa12-4634aa0b431003-Jan-1312:30 AM
a15bb095-aeb9-44e1-a79c-1a17cee207d503-Jan-1312:28 AM

None if these crash reports seem to have been send.
Do you have crash reports with a "bp-" prefix that were submitted and that show a crashing thread?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can use one of these to start Firefox in <u>Safe mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes

Unable to Install Office 2013 Pro and I get returned message "Couldn't Install We're sorry, we had a problem installing your office programs"

I purchased 40 licenses of Office 2013 Pro from a vendor in the US and received 40 product keys along with the URL to download the software - 1 for each pc activation codes. I have done a few and were all successful. I am now trying
install on 2 other pcs and I am having real difficulty and getting error message each time I try to install. I am able to download the installer and copied to my desktop and when I double click to execute it, it gives me the option to run on the next
screen. I click on run then it gives me the message " do you want to allow the program to make changes to this computer". When I press YES, nothing happens and minutes later, I get the flwg message everytime, "Couldn't
install" "We're sorry, we had a problem installing your office programs. Is your internet connection working? Do you have enough free space on your main hard drive? Please try installing again after you've checked the above.
Go online for additional help.
I have lots of space and my pc is Win 7 64 bit new machine. I have connection to internet and I was able to get the others done. What is the problem here and I have been trying to work late night hours to try to install the program and I am unable
to successfully get it to work. I receive the same message every time and I followed all the recommended troubleshoot steps I found on the internet. Someone please help. I have to install all for all the PCs we have for our organization.
Please respond because I am really stuck.
Gabe

Hi Gabe,
First, please check the suggestion above is helpful. I also suggest you removing all version of Office and re-install Office 2013.
We can try to run the application as an administrator and check if it works.
1. Right click the shortcut of the application or the main application.
2. Select properties.
3. Select compatibility tab and select "Run this program as an administrator."
If there is anything I can do for you about this issue, don't hesitate to tell me.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Error while Installing and Starting SAP Widget Development Tools

Hi All,
I have downloaded Eclipse: eclipse-SDK-3.3.2-win32.zip from http://www.eclipse.org/downloads/download.php?file=/eclipse/downloads/drops/R-3.3.2-200802211800/eclipse-SDK-3.3.2-win32.zip
I am following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c032ae0a-7d6b-2a10-14a1-cc6efb066dfc
for Installing and Starting SAP Widget Development Tools as an Eclipse Plug-in
I am very new to it, So I was following Step by Step procedure.
On the 16th step I am getting an error:
AP Widget Templates (0.12.0.1167) requires feature "org.eclipse.gef (3.3.0)", or equivalent.
I had download the SAP Widget Development Tools.zip file from https://www.sdn.sap.com/irj/sdn/downloads?rid=/webcontent/uuid/b03b6544-c741-2a10-8999-ed04eb2b2c71
While unzipping the eclipse-SDK-3.3.2-win32.zip, there were two errors:
The System cannot find the file specified &
The file name or extension is too long.
I ignored them and continued the unzipping.
Please guide me as to how we can solve this error.
Ankur
Is it because I am using Eclipse 3.3.2 and not 3.3.0? If yes from where I can download Eclipse 3.3.0
Edited by: ankur malhotra on Jul 25, 2008 7:36 AM

Hi Ankur,
This happens sometimes because of the Eclipse that you use. Download the Eclipse JEE Version. When you go to eclipse.org and try to download eclipse you can do a comparision of the versions there, You download the version which supports all the web features.
http://www.eclipse.org/downloads/packages/eclipse-ide-java-ee-developers/ganymeder
Check the above link you will be able to see the package details. Please download this Java IDE for EE developers and try installing the SAP widgets foundation then, If you are facing any problems in installing the plugins thru local archived site please let me know.
Regards,
Sai

Want to install Windows 8.1 Enterprise on my Yoga 2 10 tablet

I would like to install Windows 8.1 Enterprise on my Yoga 2 10 tablet. The tablet came with Windows 8.1 with Bing preinstalled. This upgrade will require a full reinstall as there's no upgrade path to the Enterprise from the preinstalled version. Unfortunately, there are no dowloads for drivers or the bundled software on the Lenovo support site for the Yoga 2 10 tablet (1051F). Will the drivers & bundled software eventually be available for download or are they something I need to purchase?

Hi all,
I finally figured it out. I have the 13" with the 64GB drive Yoga 2 Tablet.
Here's what I did.
1. I used Double Driver to scan my system and backup ALLof the original drivers to a flash drive.
2. I attached a USB 2.0 hub (Must be 2.0 to avoid additional driver issues during 8.1 enterprise install)
Attached a standard keyboard, mouse, and 8GB flash drive with Windows 8.1 Enterprise on it.
(the flash drive must be a standard flash drive and must be created to booth via UEFI. I used ISO2Disc to do this)
3. After I was sure the drivers backed up I shrunk the partition of the current windows drive to 20GB and created a new partition
4. I restarted and boot into the bios and turned secure boot OFF(after you push restart hold the volume up button until it brings you to it. Here you'll find the boot manager, BIOS, etc.)
5. I then restarted again and boot to UEFI USB that had my windows 8.1 enterprise (x86 only - x64 is not supported with these devices/BIOS that I know of)
I installed 8.1 Enterprise on the new partition that I'd just created out of the remaining space I took from the original windows install - It would not allow me in any way to install 8.1 OVER the previous windows install.
6. I installed windows as normal and then used Double Driver to do a restore of ALL the previous drivers I captured from the other partition with windows on it. I had to click through several "Publisher not found, do you want to install anyway?" prompts, but it worked out really well.
7. I did a restart and ensured that everything continued to work as expected.
8. Then I booted back into the Enterprise install and in Disk Management deleted the old partition of the previous windows install and recommisioned it as a new simple volume.
*At this point there are likely tools that would combine the partitions for me but I didn't have one nor could I get any good recommendations so I preceded to do it the only way I knew how and went to step 9.*
9. I went back and repeated Steps 5-7 but this time installing Enterprise on the Original partition.
10. After a restart and ensuring the drivers worked I did all the windows updates and checked to make sure everything was good.
11. I used disk management to delete the FIRST install of Enterprise and then expanded my SECOND install of enterprise to reclaim the unused space.
12. Installed all my normal programs, joined to domain, and treated it as a normal computer from here on out.
Note - I left the 100MB EFI untouched as I'm pretty sure this is what fuels the BIOS and boot. Also the ~5GB Recovery partition untouched in case I ran into any problems and needed my original factory image back.

Cannot install SQL Server 2008 R2 Developer on Windows 8.1

I am unable to install SQL Server 2008 R2 Developer edition on Windows 8.1 Enterprise evaluation and about 3/4 of the way through the installation I get this error msg:
TITLE: SQL Server 2008 R2 Setup
The following error has occurred:
Attempted to perform an unauthorized operation.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4000.0&EvtType=0x88792597%25400xBB814387
This is my log file:
Overall summary:
Final result: User cancelled
Exit code (Decimal): 0
Exit message: User cancelled
Start time: 2014-04-23 23:49:10
End time: 2014-04-24 00:03:44
Requested action: Install
Machine Properties:
Machine name: PC
Machine processor count: 2
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: F:\My Files\My Downloads\EXISTING\SQLServer2008R2Dev\SQLFULL_ENU\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\SYSTEM
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: PC\computername
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140423_234604\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,OCS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\SYSTEM
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: PC\computername
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140423_234604\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140423_234604\SystemConfigurationCheck_Report.htm
I tried installing as adminstrator and in compatability mode with Windows 7/Vista but that didn't work. Trying to install from the dvd or from the extracted files in my drive made no difference.
I am now wondering if there is a download link for SQL Server 2008 R2 Developer edition with SP2 included (i.e. not just SP2 but the whole application (5GB+) otherwise I am not sure how to install this.

Hello,
1. Please refer to solution provided in below thread
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/61d56f64-2575-4a58-9503-84579476afaf/sql-server-2008-setup-error-attempted-to-perform-an-unauthorized-operation?forum=sqlsetupandupgrade
2. Make sure you stop antivirus services during running the setup.Make sure you Right click on setup.exe file and select run as administrator.
If above does not works include below as well
3. Please verify WMI service is started.
If WMI is started, consider to repair WMI.
http://windowsxp.mvps.org/repairwmi.htm
Reference
Link
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Problems installing 8.1.7 Enterprise Developer

Similar Messages

Maybe you are looking for