Problems installing all new SB driv
Here is my problem, and from a can see a few other peoples problem, I have an Audigy 2 and a Li've 5., I have just reinstalled Windows XP and downloaded the latest drivers for both of these cards, I can install the older drivers no problem but none of the new drivers work, they just say no Audigy2 or Li've 5. can be found, these are on different computers and the cards both work fine with older drivers, I would like to know what is the problem with the new drivers? There clearly is a problem as many people have mentioned this, if I do a manual install it works, but the setup program has problems finding the cards.
Same problem with audigy 2...
I can download and install the EAX 4.0 Update that recognize the hardware
while i cannot install the last May update because it don't recognise that there is an audigy2 onboard....
anyone can help me?Message Edited by Moreno on 05-25-2005 :43 PMMessage Edited by Moreno on 05-25-2005 :43 PM
Similar Messages
-
Problem installing a new hard drive
you need to restart your computer...hold down the power button for several seconds or press the restart button....please help i'm trying to install a new hard drive my first hard drive crash....please HELP meeeeee (sad face)
Sounds like you are getting kernel panics--usually hardware-related. You must not have something hooked up right or you have an incompatible HD.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD -
Problems installing on new hard drive
Hi, I've got a mbp 17, early 2006 I think. I just removed the hard drive and replaced it with a new, larger drive to install snow leopard fresh. Now when I power up the light at the latch comes on and I hear the SuperDrive spin with the SL disc in as though it knows the disc is present but I get nothing on the screen. It is as though the screen is not on at all. I put the old drive back in and still get the same problem.
How can I troubleshoot this to figure out what is wrong or get around it? Or is this something for a more professional tech to diagnose? I fear I may have broken something when I had it open but i never recall doing anything questionable or seeing anything odd while open.
Thanks for any help.Took it to Apple store. Logic board bad, had them replace, fine now.
-
i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your helpIt means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive. -
Greetings everyone
as the title says, ive had to install a new hard drive and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating 8500 music files individually!
Thankyou for taking the time to read my post, any help will be greatly appreciated.Ah, my reply was based on the assumption that you had a default installation of iTunes.
i.e you had all your music in the iTunes media folder inside your iTunes folder.
If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
This complicates you situation considerably.
iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
Step 1
Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
Now open the copy of iTunes Library.xml with WordPad.
Look for lines starting:
Location
These contain the paths to tracks.
You will need to use a find/replace to change the drive letter so that it is correct.
Make sure that you include enough in the "find" so that you only change the right thing.
Maybe /c:/ and replace with /d:/ or whatever.
After that, tell iTunes to use the library on the old drive with a shift key start.
Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
Then use the method in the following article to rebuild your library;
http://support.apple.com/kb/HT1451
Unfortunately the date added will be today for all tracks.
If iTunes works correctly after this, consolidate your library
File>>Library>>Organize>>consolidate
This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
Check that iTunes works OK and then use the first method.
Message was edited by: polydorus -
I use a Windows XP Laptop and Firefox browser ( free don't remember the version). My hard drive crashed today 31.07.2011 and I installed a new hard drive with installed Windows XP. I have just downloaded Firefox 5.0.1 ( free version) and would like to retrieve all by previous bookmarks and HISTORY.
https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Win XP and W2K: <br />
''drive'':\Documents and Settings\''Windows login user name''\Application Data\Mozilla\Firefox\Profiles\''profile_name'' -
Does it really back up the whole new drive or does it only back up what's been added? It seemed like it was doing the whole thing when I tried it. I stopped it. Don't want to use up all the space on my external. Is there something else I need to do or did I mess up by not doing the migrating thing? thanks!
If you installed a new hard drive, it has nothing on it and yes TimeMachine is going to take forever to restore everything back.
I guess you'll have to erase and start over again now.
Too bad, you should have made bootable clones in addition to TimeMachine, they can restore in a hour or two depending upon content, they are also option key bootable.
TimeMachine has to go through and calculate all the files it needs to bring forward, the files are strewn all over the drive. The read heads are moving all over the platters all the time from fast sectors to slow ones, not matching what's occuring on the internal drive.
With a clone the files are defragmented and optimized, the drive reads one file, moves the heads a tiny bit and reads the next all the while transferring exactly to the internal drive, they are more in step with one another, thus it's much faster restoring from a clone than TM.
Most commonly used backup methods -
I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive. I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?
Since it will not boot then a hardware test can't be run. You could try FireWire Target Disk Mode and if it works then access from another Mac to run tests on the new drive. You could also try installing the OS X software from the host computer. If this does not work then professional help should be considered.
http://support.apple.com/kb/ht1661
http://osxdaily.com/2010/04/07/how-to-boot-a-mac-in-target-disk-mode/
http://www.macobserver.com/tmo/answers/how-to-use-target-disk-mode-to-boot-from- another-macs-hard-drive -
I recently had to install a new hard drive in my computer. This caused me to have to reload all content back to my iTunes and iPod. I have many apps on my iPod and i don't know how to transfer those back to my iTunes. Can anyone help?
Right clicking on your ipod in the device list an d choosing "transfer purchases" will copy apps and bought media from iTunes to your computer. Due to the new iTunes library on your new HD, iTunes will erase your ipod during the first sync. To save your data to the computer take a look at this article about saving data from your device to a computer: http://support.apple.com/kb/HT4137
Basically it's backing up manually, transferring her purchases (apps and bought music), letting iTunes erase the ipod due to the new iTunes library, and restoring from the manual backup again, to get all the data and settings back.
Make sure your new computer account is authorized in iTunes. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
The rest of the data can be restored from the backup you made.
Restoring: http://support.apple.com/kb/HT1414
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0 -
I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working. Adobe Acrobat has been a primary tool for accommodating memory problems after a brain injury. (A car ran me down while I was out getting exercise.) I installed the SSD because I needed my management of PDF files to run faster. I called tech support for help when the software first stopped working, but they needed me to give them a number from my original disks. Because of my disability, I've been having someone come in to clean, and the shelves where I kept my software packages were cleared. I've been hunting for them ever since, but I can't look for them myself for very long at a time. Today I finally found them, but now I can't seem to contact tech support. What happened? I don't want to delete my old files because I need the setup to remain unchanged, because I don't do well with changes. I think all I should need is to have someone located the license file on drive E: and move it to wherever it is needed on the SSD drive, but I don't know what to look for.
Tech support is not normally available on weekends. You should contact them as soon as the weekend passes and pick up where you left off with them.
-
Best way to install a new hard drive into a laptop?
what's the proper way to install a new hard drive into a laptop? i've heard that cloning can result in very slow boot up and shut down times, and that the proper method is install the new hard drive, install OSX, and restore data from time machine. comments? thanks very much
Cloning doesn't cause the resulting system to slow down in and of itself, but it does retain any previous problems, which can build up over time and result in poor performance. (The same can be said of installing new system versions on top of old versions.)
A clean OS X installation will give you a clean base to start from. Mass-restoring data and applications will undo some of that benefit, but by no means all. -
Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? ThanksI just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me.. -
When installing a new hard drive?
I'm considering buying a SDD hard drive for my Macbook Pro. But I'm not sure what to do after inserting the drive, or before for that matter. I know how to physically put it in, but beyond that I'm not sure.
I have Mavericks, and I don't have a disc with Mavericks, but I'm told I can make a boot disc with DiskMaker X. So, that's what I'm planning to do.
I also have a lot on my drive and I don't want to lose it. If I use TimeMachine take copy of the complete hard drive, can I simply just install Mavericks from the boot disc I made and then drag the content from my TimeMachine drive to my new SDD and I have the exact same content on my new SDD which was on my old drive?
I have plugins for Elements, FCPX and Logic Pro I don't want to lose. Do I have to install all these plugins once more after installing a new hard drive.
How about Office? With the version I have, I'm only allowed to register one Office. Will my product key be removed when installing a new HDD so I'm able to register it once more?Neguah wrote:
I also have a lot on my drive and I don't want to lose it. If I use TimeMachine take copy of the complete hard drive, can I simply just install Mavericks from the boot disc I made and then drag the content from my TimeMachine drive to my new SDD and I have the exact same content on my new SDD which was on my old drive?
One does not simply drag content from Time Machine to a new drive. Unlike a cloning utility, Time Machine doesn't store files exactly like they are on the desktop, partly because it tracks multiple versions of each file. While you could restore your system to the SSD from your Time Machine backup, you will need to start up off the OS X boot disc and there will be a utility command on it that will let you Restore from Time Machine. Choose that command and select the new, blank SSD as the target and select your last Time Machine backup date as the source, and run it. It will take a while (possibly a couple hours) for Time Machine to reassemble the last backup from the pile of file versions in Time Machine.
If you wanted to do a straight copy from a backup to the new blank SSD, that is why you will get advice to use a cloning utility instead. If you clone your system to another drive, not only can it be bootable from that disk, you can clone it back to any other drive (like a new one), and it works right away because it really is an exact copy of your files and folders (no waiting to reassemble the system like Time Machine).
Whether you do it with Time Machine or a cloning utility, one way you can never do this is to restore an entire system disk simply by dragging files over. There are too many hidden files, too many files with special permissions and attributes that will not be preserved if you just drag them.
Also, it may not be necessary to have an external enclosure to make a clone. You can also use a drive dock or universal drive cable. But you'll probably want an enclosure anyway, as a place to keep the old drive.
Neguah wrote:
I have plugins for Elements, FCPX and Logic Pro I don't want to lose. Do I have to install all these plugins once more after installing a new hard drive.
How about Office? With the version I have, I'm only allowed to register one Office. Will my product key be removed when installing a new HDD so I'm able to register it once more?
There is no clear answer on the plug-ins. It depends on the mechanism each plugin company uses to register/authorize their plugin. If a company uses hidden files buried in the system to verify a license, that hidden file might not be present in the new system. Or they might invalidate a license if new hardware is detected. You can just bring the plugins to the new system and see, and if they work the don't worry about it, but there is a possibility that at least some may need to be restored.
I have heard of stories that Microsoft Office may be a problem, but maybe they've improved it. When the current version of Office came out apparently some people had trouble getting it authorized on a new machine or disk due to the way activation limits were implemented. There is a possibility that you may have to get on the phone with Microsoft and sort it out. -
How do i install a new hard drive using time machine
Hi there
I have purchased a new 1TB hard drive for my Mac book pro (late 2008) model. I have time machine installaed on a seperate hard drive connected with an airport base station. I do not have the orginal snow leapoard/mountain lion OS CD or DVD. Can someone please tell me the exact steps to install the new hard drive .
ThanksYou haven't inserted your new hard drive yet?.
There's two ways
1. install yourself
2. or pay someone to install it for you.
If you want to do it yourself go to google and type in "install new hard drive for macbook pro". sometimes it makes a difference what model your macbook which is why i won't provide you a link just in case its the wrong one.
Its very easy.
1. remove all screws and the lid.
2. remove screws from the black bracket which is holding your hard drive in place.
3. unplug your hard drive.
4. VERY IMPORTANT (A MISTAKE I MADE). make sure that you remove the external screws from your original hard drive as these screws are the one thing that hold and stabilise your hard drive and stop movement from happening.
5. insert these external screws to your new hard drive (there are four screws)
6. insert and plug your new hard drive.
7. screw the black bracket in firmly
8. attach lid and insert all screws firmly. -
Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?
Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance
Maybe you are looking for
-
IPhone 3GS doesn't show up in iTunes 10.3.1.55
I just downloaded the new updated iTunes today. After doing so, my iPhone 3GS doesn't show up on there or my computer. It shows up under devices but not on hardware (on my PC). Is there a glitch in the new update? I haven't had any trouble until
-
How to display error message in Shopping Cart?
How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.
-
ITunes is not picking up my iPhone or iPad when I connect (it does see my Nano)
Not sure what happened but in the last week, iTunes won't pick-up my iPhone or iPad under "devices" when I connect to my Mac. I have not been able to sync either device or update their software. iTunes is picking up my Nano and iPod Shuffle.
-
Can't remove text decoration in IE
I have set text-decoration:none and even border:none on every css rule that is associated with the main nav on the site I am working on. The text decoration still appears on all of the nav links when loaded in IE 8 or 9. I swear I had made it go away
-
MacBook Pro 3,1 - no video output
My MacBook Pro is exhibiting signs of graphics card failure. I can't get video output from the main screen or the DVI port. Apple claims I need a pricy logic board replacement. Anyone else had the same issue?