Problems installing amd drivers on HP Dv7 for windows 10

I have the HP DV7 4263cl with switchable graphics AMD chipset M880G with both Mobility Radeon HD 4250 and AMD 6370m. My processor is the AMD Phenom II. The drivers on HP's support site for my laptop are very old (2010) and work fine in Windows 7. However when I try to install the drivers in compatability mode on in Windows 8.1 or 10 or manually install them through the device manager, my computer does not respond well and doesnt install everything fully and either shuts down or shows a blue error screen.
I have tried everything and haven't had any luck getting these installed. Please Help!!!!

Yours is the third post I've seen about switchable graphics not working in Windows 10. Sadly, you may have to simply hope for a Windows 10 driver update. Have you checked for a Chipset or BIOS/UEFI update? Maybe you would have better luck on the AMD forum. If you found my answer helpful please say thanks by clicking on the Thumb's Up icon. Thanks!

Similar Messages

Problems installing QuickTime 7 with iTunes 6 for Windows XP

I am encountering problems with the latest version of QuickTime (version 7.0.3) together with iTunes 6.
Installation is fine except at the end when I receive an error message saying ’1628: Failed to complete installation’. It appears that both programmes have been installed and work but I am unable to uninstall them. Neither program appears in the Add/Remove programs list when they should be. If I select ‘Uninstall QuickTime’ from the Program list the uninstalation process starts but stops half way through.
I have tried downloading QuickTime standalone version but this is exactly the same. I removed the QuickTime folder, and all its contents, from C:\Program Files\QuickTime and installed the previous version (6.5.2) which installs and uninstalls fine.
I am at a loss as to why the latest version is causing problems.
Would appreciate any help or advice as to why this is happening?
Thanks

Will a 2nd Gen Shuffle sync with iTunes 6 for
Windows?
NO... 2nd Gen shuffle requires iTunes 7.0.2 or later

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

Problems installing or running Adobe Flash Player for safari

problems installing or running Adobe® Flash® Player for safari when trying to install Adobe Flash Player.pkg it asks to quit Dash Board client then brings up Exclamation mark up and quits install ??????

Adobe Flash is pretty much a 32-bit application. You may be able to fix the problem by going into your Applications folder, and right-clicking on Safari. There is a check box that will allow you to run Safari in 32-bit mode. Try that and see if Flash works in Safari.
I have retired my iMac, and have an HP now, but a friend helped me with the same problem when I upgraded to Snow Leopard. My PC seems to have just one 64-bit browser, that being Internet Explorer. I am using IE9 Beta in 64-bit, and the Beta for Flash "Square" in 64-bit seems to work fine. See link below:
http://labs.adobe.com/downloads/flashplayer10_square.html
Jim

Problems Installing OBIEE 11.1.1.5 on Windows XP32 step ASInstance Creation

Problems Installing OBIEE 11.1.1.5 on Windows XP32 step ASInstance failed
The problem starts here
weblogic.Deployer invoked with options: -adminurl NAR-GMIKOLAY:7001 -username weblogic -name NonJ2EEManagement -source C:\oracle\OBIEE\Oracle_BI1\opmn\applications\NonJ2EEManagement.ear -nostage -deploy -upload -noexit
<Mar 7, 2012 3:56:21 AM EST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, NonJ2EEManagement [archive: C:\oracle\OBIEE\Oracle_BI1\opmn\applications\NonJ2EEManagement.ear], to configured targets.>
then evolves into
oracle.as.provisioning.exception.ASProvisioningException
Caused by: oracle.as.provisioning.engine.CfgWorkflowException
Caused by: oracle.as.provisioning.util.ConfigException:
Error creating ASInstance instance1.
Cause:
An internal operation has failed: Unable to validate NonJ2EEManagement Application deployment on admin server
Caused by: oracle.as.config.utl.DeployerException: NonJ2EEManagement Applicationdeployment failed
Caused by: java.lang.reflect.InvocationTargetException
**Then the PermGen space errors**
Caused by: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: PermGen space
Caused by: weblogic.deploy.api.tools.deployer.DeployerException: PermGen spac
Caused by: java.lang.OutOfMemoryError: PermGen space
I have tried reinstalling 6 different times each after cleaning registry and Middleware folder and environment variables, installation folders,
deleting middleware home. I cannot get past this "step ASInstance failed"
I am using the Simple Install.
I've tried so many of the ideas suggested out here, from verifiying the loop-back adapter in hosts in windows/system32/drivers/etc/
pinging the host computer to verify
some suggested turning internet off while installing OBIEE
I need some help.
I have 4 GB installed memory
Oracle Database Enterprise Edition 11.2.0.1
Oracle RCU 11.1.1.5
OBIEE 11.1.1.5
oraparam.ini JRE_MEMORY_OPTIONS=" -mx768m -XX:MaxPermSize=768m" ( cannot change these during simple install)
Cannot run software install only
I tried same with OBIEE 11.1.1.6 using RCU 11.1.1.6
Cannot get past the step ASInstance failed.
On top of this, there is the humiliation of hearing people set up 11.1.1.3 with 2 GB memory on Windows XP32.
Now I understand, size-wise there is major difference between 11.1.1.3 and 11.1.1.6 and 11.1.1.5
But I cannot get through this process anyhow and 11.1.1.3 is not available
of course there is a windows 32 install so, given the memory requirements and memory limitations of Windows 32 bit, and other people's success I cannot understand my reason for failure.
Please help

Please check the System Requirements for OBIEE 11.1.1.5, Windows XP might not be supported.

Can Not installed latest iTunes 10.5.2 for Windows XP

To System support,
I am having trouble installed latest iTunes 10.5.2 for Windows XP. When I start install the exe file, I got an error message:
“There is problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.”
Could someone tell me why I can’t install iTunes 10.5.2?
I even fellow the trouble shooting from iTunes page by uninstall the older version of iTunes. Now I can’t even link my iPhone or iPad now. Please advise me on what is missing in my computer for costing this issue. Thanks for all your supports.
My computer inf:
System:
Microsoft Windows XP
Professional
Version 2002
Service Pack 3
Computer:
Intell(R) Core 2 Duo CPU
T7500 @ 2.20GHz
2.19 GHz, 1.50 GB of RAM

“There is problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.”
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Mac-specific drivers and other software for Windows

Mac-specific drivers and other software for Windows how can I download them with out the install cd?

Or for the same price you can order a new Snow Leopard disk. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
That would give you Boot Camp 3.0 drivers. With Snow Leopard and Boot Camp 3.0 you can install Windows XP, Vista or Windows 7. With Lion and Boot Camp 4.0 you can only install Windows 7. If you install Lion with Boot Camp 3 and XP or Vista already on it it will work.

I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!

I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!

Hey socestlavie,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.

Cannot install Boot Camp 3.2 upgrade for Windows 7 64 bit

I recently installed Windows 7 64 bit on my macbook. I also installed Boot Camp 3.0.1 after Windows 7 installation, however, WiFi did not work. Therefore, I needed to upgrade to the latest Boot Camp 3.2. However, when I tried to install Boot Camp 3.2 upgrade for Windows 7 74 bit, I got an error message saying that I needed Boot Camp 3.1 installed first. I CANNOT find Boot Camp 3.1 upgrade for Windows 7 64 bit on Apple website at all. Can someone please help me on this? Is there a way to get the complete Boot Camp 3.2 package that can simply be installed on version 3.0.1??

here is the link to bootcamp 3.1 for windows 7 64 bit http://support.apple.com/kb/DL1336 .. and no there is no package that can be applied to the windows side to go from 3.0.1 to 3.2

Windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?

windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?

Hi Tamekia,
I am sorry to hear nothing has worked yet. I have looked up some additional information and possible solutions. Follow the steps in this document to perform a level-three uninstall, register the Windows Installer Service, and then reinstall the HP software. An uninstall and reinstall of the software deletes and overwrites any of the files that might cause the error and resets the Windows Installer. HP recommends that you download the latest software from the HP Web site to remove any files that might be causing this error.
Level-three uninstall, and register the Windows Installer Service
Note: The title of this document is not specific to the issue you are experiencing or the operating system you have, but the 3 steps and instructions are what I suggest we do to resolve the issue you are experiencing.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Does Oracle (installed in unix) support OS Auth for Windows AD?

Hi, I've tried setup the Oracle (installed in Windows) support OS Auth for Windows AD.
But does Oracle (currently I am using 9i) installed in Unix support OS Auth for Windows AD (using LDAP/ Kerberos / etc.)?
If yes, can anyone tell me how to make it ?
Thanks!

Yes.. Oracle support Windows AD authentication using Enterprise User security.
Please contact me on following if you need more details
Email: [email protected]
Ph. 732 404 8364
We are planning to have EUS presentation for our clients. Please let me know if you are interested to know more on EUS.
Regards,
Nishi, CISSP CISA

I have been trying to put some of my music and artwork, on youtube. Youtube says you need an encoder to upload music. But the problem is the only encoders available are for windows. Please help, thank you

I have been trying to put some of my music and artwork, on youtube. Youtube says you need an encoder to upload music. But the problem is the only encoders available are for windows. Please help, thank you

The formats YouTube supports can be found here:
http://www.google.com/support/youtube/bin/answer.py?answer=55744
Since YouTube supports AAC, the file format iTunes uses by default, it's probable you don't need any sort of converter.
If you continue to have problems with uploading to YouTube, I'd suggest you ask for assistance in their forums:
http://www.google.com/support/forum/p/youtube?hl=en
Regards.

Problem installing Audio Drivers for Windows XP on G550

I have tried all the posibilities to install sound drivers for Win XP on G550, but every attempt a big failure . Could someone help me to install sound drivers?
System gives error of Now Media Object.

try to download drivers from here

Problem installing lastest drivers for Audigy

I have installed the drivers (.04.0060) which came on the disk supplied with my Sound Blaster SE card and the card works perfectly but if I try to install either of the drivers below I have problems:?The drivers below will not install properly and the sound malfunctions - no EAX and a cracking sound. [color="#3300ff">Creative Sound Blaster Audigy SE and Audigy Value Driver 0.04.006 and Creative Basic Audio Suite 55.4 )? 20 Apr 06?The drivers below will install and the sound seems to work fine but when I run the sound card diagnostics it reports a problem with Directsound. [color="#3333ff">Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077 (63.39 MB)?9 Jul 07?Has anyone else had problems with these drivers and is it really important to install the newer drivers?Details of my system are as follows:?P4HT 3.0 GhzWin XP Home SP2 GB system memoryNvidia Geforce 7600GS 52MBLogitech X230 2. Speakers?Thanks.

try to download drivers from here

Problems installing audio drivers

Hi,
I have a x61 notebook, and after reinstalling Win XP (pro, SP3) I can't get the audio to work. I have tried to install the drivers from Lenovos web site (7ka113ww.exe) but get an error message saying: "The HDA Audio bus driver is required and not found".
In device manager I have two uninstalled devices, one PCI Device and on Unknown device. Where can I download the HDA Audio bus driver?
Some threads (e.g.http://forum.notebookreview.com/showthread.php?t=195883) says that I shall install Universal Audio Architecture (UAA) High Definition Audio class driver (Q888111) for Windows XP, but I only find this for SP 1 or 2, not for SP3 as I have. If I try to install the one for SP2, I get another error message saying "the service pack version is newer then the update you are applying". Anyone know where I can find the correct drivers?
Edit: I sent an email to Microsoft to obtain the 888111 hotfix, but got a response back saying that this hotfix is included in Windows XP SP3, so I should already have it on my machine.
Thanks, TJ
Message Edited by TJ on 04-21-2008 04:58 AM

You'd likely have to install the UAA driver before you but on SP3.
If it's already included in SP3 then find the .inf file, or whatever file, name and point the unknown device in the device manager to that.
But yes... it seems as if there are problems with high-definition audio and SP3; maybe try this:
http://boredsysadm.blogspot.com/2008/03/windows-xp-sp3-and-microsoft-hd-audio.html
Moderator Note; converted to clickable link
Message Edited by andyP on 04-21-2008 07:32 PM

Problems installing amd drivers on HP Dv7 for windows 10

Similar Messages

Maybe you are looking for