Problems installing bootcamp on mac pro

Hi guys,
i am trying to install bootcamp on my mac pro, however i only get as far as partitioning and this seems to take hours with no progress on the progress bar.
It just says 'status partioning disk'
i am only doing it with 32gb as recommended yet i've tried twice and thought something was wrong after leaving it for 2/3 hours and nothing happening
is this normal?

While it makes sense to use the single drive in other Mac models, on Mac Pro.... I'd avoid using OS X and put it on another drive.
32GB isn't recommended, just that if you want to use FAT you have to.
Have you got a backup? have you run Disk Utility and Disk Warrior (or another 3rd party disk utility?).
Should take 1 minute unless it runs into a bad sector; can't alter partition table or other error; there really isn't enough or large enough contiguous free space to create 32GB.

Similar Messages

" help me please" I have Windows 7 installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me

" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]

Someone in another section answered this. Thanks.

Problems with InDesign CS5, Mac Pro & 5870

I am using InDesign CS5, OS X 10.7.3 (recent clean install) on a Mac Pro 3,1 (early 2008 Mac Pro) with Apple's ATI 5870 card.
When working with a series of InDesign files today I noticed an odd problem. On some pages, PDF documents that were placed in the layout were not displaying on screen (just a white, blank space). Also, some JPEG files were appearing garbled, as if corrupted, in some of the same layouts.
My first thought was that the graphic files in question had somehow become corrupted, but after opening them that didn't seem to be the case. The InDesign files were from different sources and other than this problem, the machine is running without issues.
I don't know why I thought to try this but I replaced the 5870 with the original ATI 2600 and the problem went away.
Nothing else seems to have a problem with the 5870 including some graphic heavy games.
Has anyone else experienced symptons like this?
Thanks for your time.
Regards,
Keith

Keith: What patch release of InDesign are you running? Hold down Cmd and select About InDesign.
Did you try resetting your preferences?
I don't believe that InDesign is GPU-accellerated, and you games probably are. So if there are issues with non-GPU graphics on your card, that could be it.
Certainly hardware failure of the video card is consistent with your narrative.
You might also find it useful to cycle through View > Display Performance

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message?

How many Sapphire Sapphire RADEON R9 270X can i install in my mac pro 2009?

How many of the graphics cards can I install in my mac pro 2009? Sapphire Sapphire RADEON R9 270X
Thanks

Why? do you use FCP-X? that will benefit from two. Also gaming in Windows where you can use Crossfire
You have two 6-pin power feeds so you will need a small 450W PSU - those come with two 8-pin and two 6-pin.
Those can often fit in the optical drive bay and cost $25-75 range.
"500W" is NOT for the card! that is the minimum PC PSU only!
when buying look for card that uses only two 6-pin and not an 8-pin power.
75W for the PCIe slot, and 150W from two 6-pin cables, most GPUs fall into the 200-250W at maximum stress levels8-pin is basically two 6-pins and 150W feed
> we CrossFired a pair of Radeon R9 270s in our 2010 Mac Pro tower. Under Windows 7 64bit Ultimate, it registered 145 FPS in the Diablo test.
http://barefeats.com/tube06.html
Keep in mind that the Mac Pro tower can't feed enough power to the dual 980s, dual 290Xs, or dual 7950s.
We used an auxillary power supply to compensate.
For the hard core GPU rendering, there are external expansion boxes with their own power supplies.
In an earlier article, we featured the Cubix Xpander which facilitated the connection of 5 GPUs to the Mac Pro tower.
If you favor an AMD GPU like the Radeon R9 290X, MacVidCards can modify it to run at PCIe 2.0 bandwidth in your Mac Pro tower.
The Sapphire Radeon R9 7950 Mac Edition is available from OWC and TransIntl.
February 6th, 2015 -- Dual GeForce GTX 980s vs other Dual GPUs running multi-gpu 'aware' apps
February 6th, 2014 -- (UPDATE) GeForce GTX 980 GPU versus 8 other GPUs running Games and OpenGL Benchmarks
January 29th, 2015 -- GeForce GTX 980 vs 9 other GPUs running Resolve, LuxMark, and Octane Render
December 28th, 2013 -- Does Final Cut Pro X 10.1 render faster on Mac Pro towers with Dual AMD GPUs? What about Motion 5.1?
Things to keep in mind:
The Radeon R9 280X we used was 'un-flashed.' It booted OS X fine but there was no startup screen. Also, when we checked the speed of CPU-to-PCIe-to-CPU communication, it appeared to be running in PCIe 1.0 mode instead of PCIe 2.0. However, unless the GPU intensive app saturates the PCIe 1.0 bandwidth, it will not run any faster in PCIe 2.0 mode. http://barefeats.com/tube12.html
Which is one reason why you might want to buy pre-modified cards from http://www.macvidcards.com

ATI FirePro V9800 work with Mac OS X? Can be installed on a Mac Pro 8 Core 2011?

ATI FirePro V9800 work with Mac OS X? Can be installed on a Mac Pro 8 Core 2011?

I hv tried installed FirePRO V5800 on 2012 MAC PRO ,no luck
* hear boot chime but no display output

Trying to install Mavericks on Mac Pro series 4,1

Hi all,
I'm trying to install Mavericks on Mac Pro series 4,1 After downloading from App Store, when computer restarts I get grey screen with the "no entry" sign. I have checked compatibility and this model qualifies for Mavericks. Tried a clean install of 10.6.8 first, but no luck. Any ideas?
The Mac has single quad core 2.66, 6 Gb RAM, NVIDIA GeForce GT120 graphics. Four hard drives. Three Pro Tools HD cards in PCIe slots.
I also tried this with Mountain Lion, with the same results.

Didn't have any luck with removing PCI cards, BUT................ here's how I resolved the issue:
I tried making a USB stick installer. That also failed, but I noticed it couldn't find any hard drives.
I did a search about OSX installer not finding drives and found someone who had that issue and it turned out to be a conflict with the WIFI card (Atheros, not the more common Broadcom)
I checked my System Profiler and sure enough, I have the Atheros.
I just removed the WIFI card and booted into OSX Installer (it was still there after the failed install) and successfully installed Mavericks.

I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

"iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion; or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 or an up-to-date browser is required for accessing email, contacts, and calendars). Some features require a Wi-Fi connection. Some features are not available in all countries. Access to some services is limited to 10 devices."
From here > http://www.apple.com/icloud/

Installing Windows 7 64-Bit Using BootCamp on Mac Pro 2,1 (Early 2007)

Hi everybody,
I have Mac Pro 2,1 (early 2007) 8-core, my OS X is 10.6.4, I couldn’t install Windows 7 64-Bit on BootCamp separate drive (as my Mac Pro 2,1 is not supported for this installation by Apple). I am seeking help if anyone find a trick to do that task. Your help on this will be highly appreciated.

I was waiting to see if the original poster was still intent on going through with it, since it's (a) lot of work, and (b) an unsupported configuration. Unless he's using > 4GB of memory I'm not sure why he needs the 64 bit version of Win7 (there's even less reason to run 64-bit Windows as a VM). I'm not prepared to assume the responsiblity of solving any/all current and future problems he may run into, especially if this is for "work" and not a hobby-level, "I just want Win7-64bit" situation. If he's reading this and wants to proceed -
The Jowie page, while workable, requires a more steps (i.e. even more work); plus, the screenshots used are from an earlier release of imgburn, which has different options from the current version, and if the original poster needs that much handholding he could be put off.
Win7 AIK is "needed" because of the oscdimg.exe that is included. It is the "official Microsoft sanctioned" way of generating Windows ISO images. It's a one-line command that outputs an ISO image file once you have the Win7 disc in the drive, no need to muck about checking/unchecking boxes etc., and running the risk of burning coasters (since there's no way of knowing whether your output works until you actually run it, and imgburn has too many ways of messing up when you don't know what you're doing).
There are alternate "direct" sources for oscdimg.exe, which are smaller downloads than Win7 AIK http://www.microsoft.com/downloads/en/details.aspx?FamilyID=696dd665-9f76-4177-a 811-39c26d3b3b34&displaylang=en , but I'm a little chary of "programs sourced from unidentified hosts", even though I'm certain most of them are just being helpful and are not malicious (have you read Ken Thompson's Reflections on Trusting Trust - http://cm.bell-labs.com/who/ken/trust.html )
If the original poster (or anyone else reading) is interested, either the jowie.com method can be used, if you are averse to a command line or have poor download bandwidth, or you can get oscdimg.exe (however you choose to do so) and execute:
oscdimg -n -m -bd:\boot\etfsboot.com d:\ c:\iso\win7dvd.iso
assuming oscdimg.exe is in your path (or your current directory), and you've created a directory c:\iso
Incidentally, after getting 64-bit Win7 installed your problems aren't over yet, because Boot Camp will refuse to install the 64 bit version on your "unsupported" machine. There is a workaround (see my post in the thread http://discussions.apple.com/thread.jspa?threadID=2589967&tstart=0 ) but I do not know if there will be a future release of Boot Camp that would defeat this.

Installing windows 7 with bootcamp on mac pro yosemite 10.10: 'your disk could not be partitioned'

I have been trying to no avail to install windows 7 on my new macbook pro
with bootcamp in yosemite 10.10
i continually get the message 'your disk could not be partitioned', does anyone know how to tackle this? *I am including the screenshot
and when i try to partition my 250GB drive giving 80GB to the windows partition it just errors,
i have tried rebooting and verifying my disk and repairing and there's no progress or change.. any ideas would be greatly appreciated

Hi nicoczyz,
Welcome to the Support Communities! The steps you have taken to troubleshoot the issue of not being able to create a Windows partition are good ones. The resource below provides another possible scenario that may be the issue here. It's not the exact error message as your screen shot and the article references Windows 8, but the troubleshooting steps are still relevant:
Boot Camp: Partition alert message when using Boot Camp Assistant - Apple Support
http://support.apple.com/en-us/HT203913
This symptom may occur if you have partitions on your startup drive in addition to the following:
one OS X partition
one Boot Camp partition
one OS X Recovery partition (normally not visible in Disk Utility)
If Boot Camp Assistant detects a Microsoft Reserved (MSR) or Windows Recovery partition on your hard drive, you may see this message. The Boot Camp Assistant cannot continue until the extra partition is removed.
Microsoft Reserved and Windows Recovery partitions can be identified as unmounted partitions with the name "disk0s3" or "disk0s5" in Disk Utility. To remove these partitions, use OS X Disk Utility.
Important: Deleting the wrong partition can cause data loss. Be sure to back up both your OS X files and Windows files before attempting this procedure.
Open Disk Utility from the Utilities folder.
Click the Partition tab.
Look for an extra partition named “disk0s3" or “disk0s5”. Select this partition so it is highlighted.
Click the Remove Partition button ( - ).
Make sure the partition you selected is noted in the sheet that appears.
Click Remove.
When Disk Utility finishes, close the Disk Utility window to quit the app. The Boot Camp Assistant can now be used to reinstall or update your existing Windows partition.
Set up a Windows partition on your Mac - Apple Support
http://support.apple.com/en-us/HT204009
Before you can install Windows your Mac, you need to create and then format a Windows partition.
Setting up a Windows partition is one of the steps for installing Windows on your Mac. Use Boot Camp Assistant to create the partition, then use the Windows installer to format it.Create the Windows partition
To create the Windows partition, open Boot Camp Assistant and follow the onscreen instructions. Boot Camp Assistant is in the Utilities folder of your Applications folder.
Use only Boot Camp Assistant to create the partition. If you partition with another app and then use Boot Camp Assistant, the drive with the partition could be erased.
Boot Camp Assistant creates the partition only if the drive is formatted as Mac OS Extended (Journaled) and doesn't already have a partition created by Boot Camp Assistant. If Boot Camp Assistant sees other partitions, it may warn you that the startup disk cannot be partitioned.
If you need help determining the best size of the partition, refer to your Windows documentation. For Windows 8, the partition should be at least 30 GB.
If Boot Camp Assistant says that verification failed, repair the drive using Disk Utility. If that doesn't help, back up your drive and reinstall OS X.
The drive you're partitioning must be an internal drive. If you have more than one internal drive and the drive you're partitioning is not in the first drive bay, remove the drives in the lower-numbered bays, then reinstall them after installing Windows. A Fusion Drive is treated as one drive, and the Windows partition is created on the disk drive instead of the flash drive (SSD).
Format the Windows partition
Use the Windows installer to format the Windows partition that Boot Camp Assistant created. When you're asked where to install Windows, select the partition named "BOOTCAMP":
Then click Format to begin formatting the partition using the NTFS file system. If you're installing Windows 7 or Windows 8.0, you won't see the Format option until you click "Drive options (advanced)":
If the installer says that it couldn't create a new partition or locate an existing one, disconnect any Thunderbolt storage devices connected to your Mac. Reconnect them after installing Windows.
If you see “No Boot Disk Attached” when starting up your Mac, the Windows partition probably isn't formatted correctly. Remove the partition, then repeat the previous steps for creating and formatting the partition.
Modify the Windows partition
Remove the partition, change its size, or change its name.
Remove the partition
Use Boot Camp Assistant to safely remove Windows and the Windows partition from your Mac, restoring your startup drive to a single Mac partition. You may want to back up your information first, because removing the partition erases all of the data it contains.
Open Boot Camp Assistant.
Select “Remove Windows 7 or later version," then click Continue.
Do one of the following:
If your Mac has a single internal disk, click Restore.
If your Mac has multiple internal disks, select the Windows disk, select “Restore disk to a single OS X partition,” then click Continue.
Change the size of the partition
It's not possible to change the size of the partition after installing Windows, but you can remove the partition and create a new partition of the correct size. Don't try to resize your partition with Windows or a third-party app.Change the name of the partition
You can rename the Windows partition from within Windows. For instructions, refer to your Windows documentation.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Dec 22, 2014
I hope this information helps ....
- Judy

Installing Windows 7 Ultimate on Lion/Bootcamp 4/Mac Pro (before 2008)

I'm currently trying to install windows (described in title). Everything works fine until the windows intallation gets to the last step. It restarts the computer to run the configuration which causes a blue screen of death to appear and disappear so fast I can't read it. I've been poking around to see if there are any solutions but I haven't really seen anything helpful. The closest I've seen has been to rename the apple drivers bootcamp installs (or something like that) but when searching the file system I can't find the ones mentioned. Also this compy has a 2 x 2.66 GHz Dual-Core Intel Xeon processor with 2GB 667 MHz DDR2 FB-DIMM ... and was purchased around 2007/2008. Thanks all.

Windows 7 64-bit requires UEFI, which means Mac Pro 3,1 Early 2008.
That is what Microsoft supports for UEFI and GPT on 64-bit OS, www.uefi.org group, Intel, Apple and other partners.
And the ROM yu have is 32-bit and too small for that. UEFI didnt' exist until two years after the MacPro line debut.
So the easy way: install Wndows on a PC to get it started, don't update, then insert drive into Mac Pro and continue from there. That is the easy route.
You actually should, with 64-bit DVD, get an error message:
Select CD ROM 1 or 2
http://www.bing.com/search?q=select+cd-rom+boot+type+windows+7+boot+camp
I had Windows 7 evaluation copy, on my computer, which was expiring. Bought the Windows 7 Home premium and put the disk in the CD-Rom drive, and started my computer. Got the "Select CD-Rom Boot Type" prompt with the options "1" and "2", with no descriptions for either one. I entered the number '1' and my computer started with the evaluation copy (tried '2' as well). Finally, I started the computer again and entered the number '3'. Installation process for my Windows 7 home premium started.
Someone put this help tip and it should be useful, but does require Windows, and it is easy to install Windows from ISO or DVD into a VM whereas native install fails.
Again, you only need Apple drivers, not Boot Camp Assistant to partition etc and you do need to put the Windows drive in bay #1 or #2 while removing all other drives (external as well).
Try typing "3" though if you get the "Select CD" prompt first, seems Microsoft has for years had an issue with their loader is not ISO9660-compliant.
http://www.imgburn.com/index.php?act=download
http://www.virtualbox.org/
And if it was my Mac, I'd download Windows 8 Preview on the 29th (well, wait a couple days for the server to catch up as it will probably get million downloads a day). Unless you have access to Windows 7 through work or MSDN.
You only need to buy System Builder Windows 7 64-bit Pro - Pro to use both processors in your system.
And normally installing 32-bit version is a piece of cake. and from in there you can install 64-bit in another partition on same hard drive without having to boot off DVD.
I think you created the DVD with Disk Utility and that is why it doesn't work. No?
http://msdn.microsoft.com/en-us/windows/apps/br229516

Vista Ultimate SP1 (retail dvd) will not install on new Mac Pro

I wish to dedicate a new 1TB hard drive in Bay3 on a brand new Mac Pro for Vista Ultimate SP1, preferably 64-bit. I have tried several times to install a retail dvd version of Vista Ultimate with SP1 (both 32- and 64-bit) without success on two different hard drives (first the one in bay 3; then, after lack of success, the one in bay 4). The installation process does not proceed beyond the stage where Vista must format the hard drive. Vista always displays the message that Vista cannot be installed on a disk of the "GPT style." After giving up on the installation, the disk appears to Disk Utility as a "GUID" disk.
I am seeking advice from anyone who might be able to help me proceed. The remainder of this message provides more detail about what I have tried.
Before starting Boot Camp, I formatted the hard drives initially as MS-DOS FAT, and on later attempts, as Mac OS Extended (Journaled). Neither matters. After several attempts, I verified the functionality of the drives by partitioning them using Disk Utility and then repartitioning to one partition. Both 1TB drives appear healthy and can be partitioned and re-partitioned.
When Bootcamp Assistant (BC) calls for the Vista disk, the Vista installation proceeds until the stage when Vista calls for me to identify a hard drive partition for installation. After selecting the largest partition on drive 2 (in bay 3; size 931GB) , the BC Installation and Setup Guide instructs me to "format" the partition. When I do so, the following Windows error message appears:
"Windows cannot be installed to this disk. The selected disk is of the GPT partition style."
Based on some forum comments, I also tried a different procedure at this stage of the Vista installation. Instead of choosing "format," I first chose to "delete" the selected partition. The disk then appears as "unallocated space." I then chose "new" and "apply" in the hope that it would create a correct NTFS partition for Vista. It then appears as Partition 2 of either Disk 2 (or Disk 3, which I tried subsequently). However, the subsequent "format" still yields the same error.
I tried both procedures with Vista 64-bit and with Vista 32-bit. No difference.
Suggestions most welcome.

When I provided a link to threads about "Install Vista SP1 DVD" I knew and had in mind a couple threads where people have tried. And trying will help understand.
You don't need to format as NTFS on another PC when just installing MacFuse plus 3G driver extensions will let you do so on your Mac Pro. And that is just one option. There are always multiple ways to get to the same place.
Due to EFI changes there is a tool and tips on how to convert your DVD, but I didn't have time to go back and find and pull those together.
Installing SP1 DVD attempt without success:
http://discussions.apple.com/thread.jspa?threadID=1501656
http://www.ezbsystems.com/ultraiso/
MS OSCDIMG.exe
Yes, it’s a fairly long process and requires you to download stuff (and be running Windows in the first place) But, it does work as long as you follow the instructions correctly.
Convert DVD to ISO and prepare for EFI booting on Mac
tried rebooting about 10 times. No luck. Finally I pointed Parallels (free trial available) to my blank bootcamp partition and set parallels to boot from CD before HD. Parallels booted the Vista install CD just fine, and put Vista on my HD. Crashed at the end though and said it couldn't make the boot camp partition bootable so all changes were removed. Rebooted under boot camp and the installer came up fine off the CD.
So if you have this problem, and nobody else can help, and if you can find it, maybe you can download..... Parallels. Feel free to post this on the other threads. Unlike other workarounds I'm guessing this will work for everyone and it only takes a free trial download of parallels to give it a try. Still wish apple would acknowledge the problem and post a fix. Can't be that hard.
I think VMWare Fusion also supports vitualization with the bootcamp partition as the target so that may help you get around this install bug in boot camp(or the mac's firmware) too.
I would have thought that with Intel and Microsoft both saying they would begin to support UEFI with Vista SP1 64-bit, and Apple is part of the EFI Group, that "we're different" was a thing of the past. Instead it is harder.
http://www.microsoft.com/windows/products/windowsvista/sp1.mspx
Remember, Google is your friend (usually) - "Apple Vista SP1 64-bit DVD Install":
MacBook Pro Vista SP1 64-bit Install:
http://andersonshatch.wordpress.com/tag/vista-64-bit/
Oh, and while I read Apple KB changes daily, I have never seen anything address Vista SP1 64-bit install, support, etc mentioned once. Am I missing something? or is it MIA?

Bootcamp, intel mac pro, using entire drive, installer hangs- what am I doi

I have been trying to install boot camp and windows on my Mac Pro. Installing on my MacBook Pro was so easy I didn't expect any kind of problems, but I got them anyway.
a) I am installing on a hard drive and I expect to use the entire drive. I start boot camp and designate the drive. Windows appears to start installing but when I get the format screen, there is no partition on any drive labelled Boot Camp.
b) if I choose the drive I wanted anyway, it will format for NTFS and copy all the files. It will re-boot and start the GUI install but hang with 33 minutes to go. I have tried this multiple times and the result is identical every time.
What am I doing wrong?

As of this point in time, I have been able to get windows installed- I noticed during the windows setup and format section that the disk actually had two partitions, one very small and the other the size of the rest of the disk.
(this was probably a mistake) but I deleted the small partition, formatted the large one NTFS and continued with the install. Well, windows went on without a whimper after that and I was able to install the windows drivers from my apple disk.
BUT when i go to preferences/startup disk to select the BOOTCAMP partition (yes, that shows now) I don't see it.
If I start Fusion, I can see and boot the bootcamp partition but if I go into the control panel and start the bootcamp control, the mac os partition does not show.
So, does it sound as though I deleted what apple uses to select between the mac os and windows installations when i deleted that small partition?
I am afraid to try again.

Install Bootcamp on Mac Mini late 2014 Yosemite Fails?

Trying to install bootcamp with Win 8.1 pro on a Mac Mini (Late 2014) under Yosemite and get to the screen on Win 8 side which says 'Where do you want to install Windows?' and I choose the "Drive 0 Partition 4: BOOTCAMP" and the next button never becomes enabled.
There is a message saying "Windows can't be installed on drive 0 partition 4" and an addition message box which says "Windows cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS".
At this point I'm dead in the water -- cannot proceed.
Formatting the drive doesnt work and just screws up the whole process.
I've redone this quite a few times and end up in the same situation everytime.
I also tried with Win7 install I had but that failed completely and it never really proceeded after rebooting from Mac side.
Any ideas?
Is bootcamp busted on Yosemite? I dont easily have another machine I can try it on.
Is bootcamp busted on Mac Mini? Has anyone tried bootcamp on new late 2014 Mac Mini?
Thanks
James

Hi Steve
Its not a fusion drive. The full spec is
2.6GHz Dual-Core Intel Core i5 (Turbo Boost up to 3.1GHz)
16GB 1600MHz LPDDR3 SDRAM
1TB Serial ATA Drive @ 5400 rpm
Intel Iris Graphics
I wanted the size of the drive large as I'm going to use it for just a small amount of Mac work and a very large amount of Windows work.
I did actually click format during a number of the attempts I've tried. It generally formatted and left me no better advanced. Generally it would removed the word BOOTCAMP from the drive. I've even tried deleting the partition and reestablishing in -- that doesnt help either.
My latest attempt has seen that the whole bootcamp partitioning structure is truly busted. When I go back to the Mac and enter bootcamp assistant it says I cannot do anything now and tells me the partitions cannot be changed. Now I'm really not in a great position.
James

Would an Airport Extreme card newly installed in a Mac Pro require Leopard?

Hello friends,
Yesterday I went to the Apple store and had them install an Airport Extreme card in my Mac Pro. The airport is found, activated, and works for a computer-to-computer network between the Mac Pro and a Macbook. However, it doesn't find any other wireless networks, even though the laptop is right next to it and detects them fine.
I am wondering if perhaps the Airport card I got is not compatible with OS X 10.4.11 and that I require 10.5.x for it to work.
Alternatively, whether there is some configuration tweaking I can do to get it working.
The Airport card is described in System Profiler as follows:
Wireless Card Type: Airport Extreme (0x14E4, 0x88)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.46.9)
Thank you for any help. Pretty frustrated; have a slow wi-fi connection here anyway and can't even get cell reception at the site so it's hard to research the problem!
- nick

Not sure what you mean "configure by ethernet."
Do you mean to connect the computer to the wireless base via ethernet to configure the computer's network settings for that network, and then have the wifi card ride those settings?
Do you have any idea whether OS X 10.5.x is required with the latest airport cards?
Thx
-nick

Problems installing bootcamp on mac pro

Similar Messages

Maybe you are looking for