Problems Installing Cisco Works 4.2 Evaluation Version

Hello, I'm trying to test Cisco Works LAN Management Solution 4.2
I have a partition in my laptop to test this software but after the installation process i'm unable to access via http to the server,
I does not display anything.
Please help me!

Doublecheck your prerequisites as Vinod suggested. LMS is very particular about you meeting ALL the prerequisites exactly. If some are missing it will notify you during installation. Others may not generate an error but will leave you with a non-working setup.
When you machine starts, it takes as long as 15-20 minutes for LMS to be fully functional. There are many background processes started by the daemon manager. There is a shortcut to see if all are finished starting by watching for the "ready" folder (NMSROOT\objects\dmgt\ready is the default location) to be empty. As CiscoWorks LMS starts up, that folder will at various times have lock files put into it as the processes start.
The pdshow command enumerates the status all of the background processes.
Yes, NMSROOT is the parent folder for your installation. The default location for NSMROOT in Windows is under C:\Program Files\CSCOpx. You can confirm on your installation by checking your environment variables under Windows Server.

Similar Messages

  • How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

    Hi Everyone,
    I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
    "Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
    http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
    Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
    Awaiting your response.
    Farid

    Hi ,
    LMS 3.2 is not supported on Windows 2008 Server Standard R2.
    here is the supported platoform for LMS 3.2
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
    Thanks,
    Gaganjeet

  • Problems installing Download! for PC Beta Version ...

    I am trying to install Download! for PC beta version 1 onto my PC. But it brings up an error message saying
    "Install Nokia PC Suite version 6.82.21 or later before installing Nokia Download!". Then it quits.
    However I have PC Suite 6.85.14.1 already installed.
    Has anyone else seenthis or am I doing something wrong.

    I had the same problem and tried unsuccessfully several times to install this update though the software update. I did download and install in manually, and it worked with no problems. Here's the link I used: http://www.apple.com/downloads/macosx/apple/application_updates/javaformacosx105 update2.html

  • Problem with Cisco Works Assistant 1.0

    Good Morning
    I'm just installed the version LMS 3.0 on my server SunSolari 10 following all the instructions on the installation guide.
    At the end of the installation I connected the tool by Http and till now all was working fine.
    When I tried to configure the "Server Setup" by Cisco Works Assistant I got this message : " Reachable(CiscoWorks Assistant does not support the installed Common Services version.).
    Strange errors, because I have installed the LMS by Cisco DVD where the version of the applications should be the right one, infect I checked them found out that the Version of CM is 3.1 that is supported by CiscoWorks Assistant 1.0.
    Can you help me because I'm not able to find a solution
    Thanks so much in advance

    Try the solution in this thread first:
    http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cbfbc4a

  • Problem installing Cisco AnyConnect Secure Mobility Client

    Hello,
    When attempting to install the Cisco AnyConnect Secure Mobility Client, I get the following message: "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
    Well, my support personnel haven't been able to assist. I am attaching the setupapi.dev file I was told could help in troubleshooting. Any help is greatly appreciated!
    Thank you in advance.

    do you have the xml assigned in the group policy on the ASA?  I know the scripting behavior changed between anyconnect 2.5 and 3.1.  AnyConnect 2.5 only required the xml profile locally but 3.1 requires the xml with EnableScripting = true to be assigned to the group policy.

  • Problem Installing Cisco Secure 4.2

    Contiunally getting this message:-
    odbc operation failed with the following information:Message=[sybase][odbc driver][adaptive server anywhere]Invalid user ID or password, sqlstate=28000,native error=-103
    This is a fresh install, but it just will not go through.
    Any pointers.

    I am experiencing the identical problem.
    examining the ODBC setting on the box there does not appear to be anything there.
    however the Symantec Endpoint Protection Manager software is installed on the box, and I have a suspicion that this can feature an 'embedded database'
    Can anyone from Cisco speak to whether there have been issues reported with SEPM and ACS server co-existing on same box?
    Kind regards
    Colm

  • Problem Installing Microsoft Works  4.0 c

    My internal hard drive crashed (died) with all of my applications (programs) on it. I have successfully installed back all of my applications from the original program disks with the exception of Microsoft Works Vers. 4.0c. Works will not install the original software back on my HD even though I have the original Works program installation disks. I get the following error messages when I try to run the Installer program on the Works program floppies. 1st error message: Microsoft setup was not completed successfully. 2nd error message: Setup was unable to locate a valid setup table file and cannot proceed without one.
    When the crash occurred I had my system folder running OS 9.1 on my other Internal HD so I did not have any startup issues, etc. (thankfully)
    I have a gut feeling that because I still have some Works files in my system folder they may be causing the setup program from running properly.
    I am hoping someone knows a work around to help me get Works installed back on my HD.

    Jan.
    I doubt that I have any problems with the install disks, I copied the 68K Vers. of the Microsoft install disk just as you had explained using disk copy 4.2------------it copied perfectly and when I tried to use the copy I got the same errors as I mentioned in my original post. I did not do the checksums as you had mentioned because the disk and the backup I made are working perfectly. I have not gotten any kind of error code that would be linked to a problem with the disks. My floppy disk drive has never caused me a problem in the past so I have no reason so suspect the floppy drive as being the issue.
    I think the Micosoft Works error messages hold the key to the problem. Especially the error that says "setup was unable to locate a valid setup table file and cannot proceed without one", if I only knew what a valid setup table file was I might be able to dig deeper into the issue!!
    I also ran Disk Warrior from the Disk Warrior CD to check out my Hard Drive, Warrior found some issues with my Hard Drive which it fixed--------I then tried the Works install disk again after fixing the errors with Warrior but had the same errors. ????????
    Thanks for your input but we are still out in the woods!
    .ld
    I

  • Problems installing component works

    I get the message "The ordinal 6467 could not be located in the dynamic link library MFC42.DLL", then after hitting "OK" I get "Unable to register C:\WINNT\SYSTEM32\CWUI.OCX"
    What could be wrong?
    Win2000 pro
    visual basic
    pentium 3
    512meg ram

    It sounds like another product that has been installed on your machine installed an old or bad mfc42.dll and it could have possibly overwritten your previous version of mfc42.dll. For some ideas on how to fix this, see the Microsoft Knowledge Base article "Linked to Missing Export Mfc42.dll" Error Message After You Install Money. This article discusses the error in the context of Microsoft Money, but I think that the resolution steps could be helpful in your case as well.
    - Elton

  • Does Instrument I/O Assistant only work in the activated version of LabView 8.0 and not in evaluation version?

    I'm using the LabVIEW 8.0 evaluation CD and every time I try using the Instrument I/O Assistant I get this error message "Measurement and Automation Explorer or the Instrument I/O Assistant is not installed correctly. Please install these from the LabVIEW Driver CD." So I tried installing both from the Device Driver CD and still it didn't work. I also tried uninstalling all NI softwares and components and reinstalled everything from the LabVIEW evaluation CD and Device Driver CD and still the same result.
    I was wondering maybe the Instrument I/O Assistant will only work after I activate LabVIEW. Is this the reason why I can't use it or does Instrument I/O Assistant also work even if I'm only using the evaluation version? Please help!

    Glynster -
    Yes, Instrument I/O Assistant does work with the evaluation version of LabVIEW 8.0.  However, you need to install Instrument I/O Assistant from a version of the National Instruments Device Driver CD that shipped with LabVIEW 8.0 (or later). 
    NOTE: The link provided for Instrument I/O Assistant 1.0.1 DOES NOT work with LabVIEW 8.0. It is only for LabVIEW 7.x.
    You will need to obtain a Driver CD to get Instrument I/O Assistant to work with LabVIEW 8.0
    -Tommy

  • I cannot install Cisco VPN Client 64-bit in windows 8

    Hi
    I bought new laptop which is preinstalled with widows 8 EM OS.. But for my usage i need to install cisco vpn client (64-bit version) software in my windows 8 EM OS.. which i cannot proceed actually because of the following error :
    Error 28000 : Before installing the cisco systems vpn client 5.0.7.0290, you must uninstall the previous version of cisco systems vpn client 5.0.7.0290, using the Add/Remove program files option in the control panel, then restart your system
    Following the above popup again a popup prompts displaying :
    I have tried to uninstall the program from control panel but i could not find vpn client installed in my system at all... Please give me suggestion how to uninstall and install the new one..
    Could you please advise how i can resolve the above issue and setup Cisco vpn client in my windows 8 OS? your reply is more worthy to carry on my work...

    Hello,
    The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
    Please note that this forum exists to discuss TechNet Wiki as a technology/application. If you have a question about another technology (such as Windows), you can ask in another forum. If you're unsure which forum, a Bing search often works the fastest or ask
    here: http://social.microsoft.com/Forums/en-US/whatforum/threads
    However, I'd ask in the
    Windows 8 forum on Microsoft Community.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book: Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Windows PPro CS6 (evaluation version) crashes when opening (simple) projects

    Hi.
    I'm encountering a problem in Windows 7 x64 with PPro CS6 (installed as part of the evaluation version of the Master Collection). It occurs both with the version I downloaded using the Adobe download helper tool, and the patched version (that is, after applying the bunch of updates of the master collection). I can reproduce it reliably:
    1) Open PPro, create a new project and a sequence (HDV).
    2) Add a MTS clip into the project, put it to the sequence.
    3) Save the project
    4) Close PPro, Restart it
    5) Open the project that was just saved
    What happens is that the application simply crashes/becomes unresponsive. In the monitor window I see that yellow-ish image telling me that media files are being loaded. I can't say PPro is a very useful application when it does not support to open projects xD.
    What can I do? I simply assume that this behavior is not a feature, so.... maybe the problem is with my system configuration? Note that I do not have QuickTime installed, and I don't intend to do so (I'm avoding anything remotely related to Apple).

    Why would you put an AVCHD clip into an HDV sequence?
    HDV is specific to video from a HiDef TAPE camera, not a file from a newer type of camera
    Please NOTE that the PPro CS6 screen may look a bit different
    For CS5 and later, the easy way to insure that your video and your project match
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
    -and a FAQ on sequence setting http://forums.adobe.com/message/3804341

  • Cisco Works "Devices not configured in ACS"

    Hi!
    I have instaled Cisco Works ver. 4.3.1
    I have added using the Device Discovery, my devices. Some of them where not configured already on ACS with the loopback address, that was the one on the discovery configurations. Because of that, i could not manage those devices, althoug i could authenticate on them. I then updated the ACS with the loopback address, and configured the router's to authenticate using the source-interface of the loopback.
    The problem is that i keep not being able to manage this devices on the cworks, because the are still as "Devices not configured in ACS".
    Can anyone help me here?
    Regard's
    Miguel Amaral

    Hi,
    This happens, when you integrate the ciscoworks with ACS and Router/switches not configured with ACS. Try to reconfigure the device in ACS, try removing and adding it again in common services...Try for a single device and check it out... Try stopping/starting cw services after that // net stop crmdmgtd, net start crmdmgtd. Revert with the results..

  • Cisco works windows 2000 server (IDS)

    I installed cisco works prepared for monitoring IDS Sensor, but i have some problem Access Apache windows folders
    Error: The requested URL cannot be reached because client denied by server configuration: c:/program files/cscopx/htdocs/csconm
    Description: 403 Forbidden is the HTTP status code returned by the Apache web server when either the user or the server itself has insufficient access rights to the URL.
    You are not allowed access to this URL due to insufficient access rights. This may be due to an incorrect installation of the product. Please refer to your product's installation guide.

    Please try the following:
    Stop Daemon Manager. Type in "c:\net stop crmdmgtd " in the Windows command line
    Then go to: NMSROOT\lib\web\conf\allow_files.conf (where NMSROOT is Progra~1\CSCOpx)
    Please check if this file has the following entries
    /index.html
    /login.html
    /mainPanel.html
    /JSP/cmf/admin/index.jsp
    /login1.html
    Afterwards, restart Daemon Manager. Type in "c:\ net start crmdmgtd" in the CLI.
    And try to access the server again.
    HTH,
    -J

  • Problem installing new email and calendar update o...

    hello nokia, i have problem installing new email and calendar update version 3.6 (5) in nokia 701 fp2...i have download it when it appears in my software update and after download installation start and i waited for the installation to finish up but the phone switch off its self ...phone starts again n again i try to install but the phone switchng of itself ...i try many times but it didn't work...so need help guyz love nokia thnkz

    Confirmed!
    It's an anti-virus related issue. First tried to disable only protection, firewall, etc., but it did not work fine.
    As suggested, so I deleted KMS (but keeping the application settings and objects in quarantine), and was finally able to complete the installation of the update.Then installed again KMS and everything still works fine.
    No experience of Wi-Fi issues.
    Nokia 700
    113.010.1506.C00.01 - FP2

  • Unable to install Cisco Jabber Video in Windows 8

    When I attempt to install Cisco Jabber Video for TelePresence (version 4.6 and 4.7) in Windows 8, I get the following error message:
    The error says: "The wizard was interrupted before Cisco Jabber Video for TelePresence could be completely installed. Your system has not be modified. To complete Installation at another time, please run setup again. Click Finish to exit the wizard."
    The error occurs for 4.6 and 4.7. What can be done to resolve this issue?

    Hi Robert,
    Is Windows 8 on a Surface Tablet or desktop/laptop?
    If Tablet, this platform is not supported.  No ETA on when a version will be released to support this.
    If desktop/laptop, then you need to update your video driver by visiting the website of the manufacturer, i.e. Intel, nVidia, ATI, etc. The latest video driver cannot be obtained by using the Microsoft update tool.  These drivers are usually generic and/or not the latest.
    Once installed, this error should go away. 
    If installed and you still get the error, then this means your video card is unsupported and you will not be able to use this software.
    Jason

Maybe you are looking for