Problems installing contacts to Nokia N8 using Nok...

Hi everyone
I cannot for the life of me get my contacts list which I backed up from my Nokai N82 onto my Nokia N8-00.
The file is a straight forward .nbu file, which I have tried to upload through Nokia suite, directly to the phones harddrive, and SD card.  I've also converted the whole thing to one single .vcf file, and each contact individually.  In the suite, it opens the fie and shows all the contacts, yet when I try to "restore", it seems to be transferring, but then when I check the phones address book, it is empty.
Many thanks
Solved!
Go to Solution.

If the contacts are getting displayed in the Nokia Suite, what you can try is connect the phone to PC..Open Nokia Suite-->Contacts and select all contacts..Then Drag-and-Drop them to the 'Contacts' folder at the bottom next to the Phone icon...
If you still face some problem, do not select all at once but select in batches of say 20-25 contacts and try the same ...

Similar Messages

  • I have a problem installing Adobe elements premiere 9 using windows 8.1

    I have a problem installing Adobe elements premiere 9 using windows 8.1, it just says that it did not install and no files were changed. is this program compatible or is it yet another bin job? 
    H E L P

    miked
    I have Premiere Elements 9.0/9.0.1 installed on Windows XP 32 bit, Windows 7 64 bit, as well as Windows 8.1 (previously 8) and no problems.
    Are you installing the program from installation files (purchased as a download to a Windows or Mac computer??) or from installation disc labelled for Windows?
    After the program is installed, then you install the Premiere Elements 9.0.1 Update and work from it.
    Adobe - Premiere Elements : For Windows : Premiere Elements 9.0.1 update
    More details first before we go changing any compatibility settings.
    Thanks.
    ATR

  • Error installing pc suite/nokia cable drivers/noki...

    hi..i'm using windows xp service pack 2,my phone is a nokia 5700MX on firmware version:3.83.1
    i had the nokia pc suite version 6.82 installed on my pc but accidentally deleted some nokia pc suite files(common files),so i decided to uninstall and reinstall the newer pc suite version 7.
    i tried to manually delete the program files and registry entries but that was too much to handle so i used REVO uninstaller to completely remove the pc suite files and reg. entries from my pc.
    now whenever i try to install pc suite version 7, i receive two consecutive error messages:
    1-"UninstPCSFEMsi.exe has encountered a problem and needs to close. We are sorry for the inconvenience".
    2-"installation operation failed.the windows installer service could not be accessed.this can occur if you are running windows in safe mode,or if windows installer is not correctly installed.contact your support personnel for assistance".
    and that's the same case whenever i try to install nokia software updater or nokia cable driver but with only the second message.
    i re-installed the windows installer but still no good,so i tried that nokia pc suite cleaner version 3.6 with every option available in it..no good! but i attached the log to this message ,maybe it'll help u help me !
    there is a new firmware to my phone which obviously i can't install..nor any other 3rd party applications on my phone..HelP mE install pc suite ! ='(
    Attachments:
    PCSuiteCleanerLogFile_7-16-2008_175035.txt ‏2 KB
    HKLM_PCSuite_RegAnalyseFile.txt ‏1 KB

    Hi,
    If your intension is to install the latest PC on your PC, uinstall Nokia PC Suite(if any), PC Connectivity solution, Nokia Connectivity cable driver Run Nokia PC Suite clenaer and then install Nokia PC Suite latest switch off/on the PC and then try to connect your mobile now... Best of Luck

  • Problems installing Belle on nokia N8 - connection...

    SOLUTION : in combination with win XP SP3 and nokia suite, trying to upgrade the N8 to belle, you get the error message connection lost. Try a diffretn computer with win 7. Install the nokia suite and and then upgrade the phone. This solution worked for me.

    Paddyg_123 wrote:
    Hi
    I've tried updating my N8 with my PC a few times now, I get past the backup then into the installation phase, then the phone powers down and doesn't restart, windows does its dinging thing a few times noting disconnections and connections etc, and then I get a failed message in Nokia Suite saying that the connection has been interupted and gives me a few steps to follow to resolve, I follow those steps to the letter, which are
    Disconnect phone
    Hold power button for 10 seconds
    Reconnect Phone
    Wait
    After a long waitI pressed ok and it went to the install phase, a few seconds later, it says no and gives me the same steps to do. After doing this a few times, I booted my phone as it was still off at this point. The device booted and seems to be ok. I then tried again with the install from scratch and same thing happened. Device is still ok, and seems to be functioning fine, but it is still Anna.
    Device Details:
    Type - RM-596
    Code - 059C5QB
    Provider - O2
    Nokia Suite Version - 3.3.84 Beta
    I will be uninstalling this beta version and trying again on another PC in a few hours when I get home, at the moment I am using my laptop and report back later with any changes. If you can help in any way or suggest any advice I would be grateful.
    Thanks
    Paddy
    i have got exactly the same problems, still havent found a fix either

  • Problem installing android-sdk from AUR using yaourt

    Hi all,
    I use yaourt to install packages from the AUR but I'm having an issue with android-sdk.
    Whenever I run 'yaourt -S android-sdk' it seems to detect that the 'java-runtime' is not installed.
    However, I do have sun's jre and jdk installed (I was having applet issues with openjdk) and it detects this when it actually starts installing it.
    But it just reinstalls the package and quits without installing the android sdk. If I run yaourt again, the same thing happens.
    Does anyone have an idea of what the problem might be?
    I could download the tar.gz from google but I'd rather keep everything handled by arch package management.

    Is that a show stopper for yaourt?  I use aurbuild and did that install the other night.  It tripped over the java runtime and pitched a warning, but the build worked and it installed. 
    I could download the tar.gz from google but I'd rather keep everything handled by arch package management.
    Even if you hand build the AUR in a directory of your choice, the resultant package is still integrated into your Arch system using the -U option of pacman.  Regadrless of the front end (Yaourt, aurbuild, or roll-your-own), pacman tracks the package as 'Foreign'.  FYI.

  • Problems installing Sonata Std font for use in Word 2011 for Mac

    I just purchased and installed Sonata Std font (downloaded from the Adobe website) for use on my 2009 MacBook, running OSX 5.8. I'm trying to use the font in MS Word for Mac 2011. Sonata Std is now showing up in the list of available fonts within Word, but when I select the font and go to type in characters within the font (such as flat and sharp signs, using the proper keystrokes), the characters are not displaying correctly (not at all, in fact — I get a series of boxy-looking glyphs rather than proper music accidentals). Are there any additional steps that I need to do in order to install the font and get it to work properly in Word?

    What are your language & region settings? Have you tried inserting those characters via your keyboard/ charmap utility? What is your default language/ encoding/ compatibility setting in Word? Definitely some sort of Unicode issue...
    Mylenium

  • How select multiple contacts to send SMS using nok...

    I want to send a SMS to multiple contacts (suppose 100/150) at a time,how can do it by single click?I tried it from nokia ovi suite but I can't do that.i can't create a groups to create a group in nokia ovi suit & how to send single SMS to that group by one click?How to make a phn call from my PC through my x5?
    Solved!
    Go to Solution.

    If you have created 'GROUPS' on your phone..Sync the Contacts with the OVI Suite..Then in Messaging-->In the Right window under 'Add Recipient'..Pull Down menu.. you will see the Groups listed at the end of the list...
    As far as Making Call thru' OVI Suite.. thats not possible I think..

  • Problems installing adobe flash player to use with picnick editing on picasa

    I want to edit a photo on Picasa.com.  To do that, I must install Adobe Flash Player.  The flash player has downloaded but does not appear to be installing though I receive a successful installation message.  When Picnick did not open, I was directed to a help page but none of the tips made sense to me.  Has anybody else with my operating system had and difficulties and then solved them???

    Never mind.  It seems to be working now.  I think I just needed to unblock pop-ups.

  • Problem installing hardware N95 8GB

    I have loaded PC Suite successfully but when I try to connect phone by USB cable I get the following "Cannot install this hardware. Problem installing hardware Nokia N95 8GB. An error occurred during the installation of this device. The name is already in use as either a service name or a service display name" The phone is showing in taskbar with red circle and x. Anyone help thanks in anticipation.
    Solved!
    Go to Solution.

    When I click on Go to Option, page is not open.
    I have the same problem with my nokia N73 (V 4.0736.3.2.1) (RM-133) (Z5.01).
    When I attach My phone with pc via usb, window shows
    'Found New Hardware' - 'Nokia N73'
    then - 'Nokia N73 USB Phone Parent' then
    Found New Hardware Wizard opens
    and it shows :- Cannot Install this Hardware
    There was a problem installing this hardware:
    Nokia N73 (or sometimes It shows Generic Phone)
    An error occurred during the installation of the device
    The name is already in use as either a service name or a service display name.
    PLEASE SOLVE MY PROBLEM. THANK YOU

  • Problems installing windows 7

    I run into problems installing windows7 on my Mac using Boot Camp. Spend my mac is the model: 21.5-inch, Late 2012. and this model does not contain its internal CD player, so buy an external. Then I decided to install windows7 and enter boot camp and try to install it but it always tells me: Boot Camp only supports the installation of Windows 64-bit platform. Use a USB drive or a DVD that contains a 64-bit Windows system.
    And because my cd I burned and 64bits and not to do it will not let me install windows and I need to install it. Anyone can help me or can tell me to do in this case?

    Do you have a Windows 7 x64 install DVD already burned?
    Have you already used BootCamp 5 to partition your hard drive for Windows?
    If Yes and Yes you should be able to get to your Windows Installation DVD.
    Shutdown your iMac.
    Have the DVD connected to your iMac with the Windows 7 x64 Installation Disk in the DVD.
    Power on your iMac and hold down the OPTION key.
    Eventually the Windows 7 x64 DVD icon should show on the screen.
    Click on the DVD Icon which should start the Windows installation.
    MAKE SURE YOU SELECT THE CORRECT PARTITION WHERE YOU ARE INSTALLING WINDOWS -- IT SHOULD BE NAMED "BOOTCAMP".
    If you haven't formatted this partition yet Windows 7 will do this. You may have to click on the option key to select the correct format (NTFS) and then let the DVD Format the BOOTCAMP partition.
    After formatting,Windows should allow you to click
    NEXT and start installing.
    I never tried installing ythis way so proceed at your own risk

  • Problem linking Outlook to Ovi suite - using Nokia...

    Hi,
    I bought Nokia N8 and tried to sync my Microsoft Outlook contacts and calendar entries using Ovi Suite. Unfortunately, I get the following message in both cases on Ovi suite
    "Reinstall Microsoft Outlook. Then sync again".
    Once I also noted the error code "83860077".
    I contacted the help line but I have to say that I was totally disappointed.
    They let me delete one DB file hidden in the folder but this didn't help either.
    Also,
    - I installed Microsoft office again (I am using Microsoft Office professional 2003)
    - I removed all Nokia programs from my PC and then installed the latest version Ovi suite 2.2.1.23
    However, the problem still remains.
    I am using Windows XP as OS.
    Connection between Ovi suite and Nokia N8 phone looks good (e.g. photos, messages).
    Can anyone help here?
    I am really disappointed and clueless to solve this issue.
    Thanks,
    Kaps

    I've just spent the last two weeks, since picking up a brand new N8-00, trying to get it to sync with my computer, home WiFi, and earpiece. Despite being told by the help line people that the earpiece bluetooth wasn't compatible, it has now recognised it. I've had to re-boot my router several times a day fo several days before the two machines finaly agreed to talk to each other.
    All that now remains is getting Ovi Suite to talk to Outlook. I've reinstalled it several times, including wiping the registry clean of anything to do with Nokia. I'm now waiting for their IT team to get back to me with a solution. I have a similar problem: Whenever I try to sync Ovi with Outlook 2007 in Windows 7, either Contacts or Calendar, the programme simply freezes and refuses to work. Eventually I get the message that it has stopped working and suggesting I let Microsoft know about it.
    I've spent to last few days on the phone badgering their support department, perhaps if this problem was reported to them by more people they might get round to doing something about it.
    I am interested to hear that Ovi 3.0 appears to work, but would be reluctant to try it  without more confirmation.
    So far I am not impressed by Nokia. It's a pity, as the phone seems to be a good one, it's just let down by shockingly poor software, but with a few tweeks it could be outstanding.

  • Help with this error message: System extenstion cannot be used:The system extension "/System/Library/Extensions/AppleACPIPlatform.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

    I have this error message:
    System extension cannot be used
    The system extension “/System/Library/Extensions/AppleACPIPlatform.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
    Please help. Is there a update or how do I reinstall?
    Thanks,
    John

    I submitted the above question, later finding that it has been answered by Buller already.  No one need reply as Buller's answer seems to solve the problem for others, and I'll try that.
    Jim

  • I get the error message:System extension cannot be used The system extension "/System/Library/Extensions/AppleUSBthernetHost.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

    I get the error message after updating itunes:
    System extension cannot be used
    The system extension “/System/Library/Extensions/AppleUSBthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
    What or how do I fix this?

    "I get the error message after updating itunes:
    System extension cannot be used
    The system extension “/System/Library/Extensions/AppleUSBthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
    What or how do I fix this?"
    I have a MacBook Pro running Mas OS X Version  10.7.5
    Is this a problem I need to fix? Is there a fix or update?

  • The system extension "/Library/Frameworks/PrivateTunnel.framework/Versions/Current/Extensions/tap.ke xt" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

    My MacBookPro freezes and i have to force shut it down and restart.
    It then gives me these errors...
    The system extension “/Library/Frameworks/PrivateTunnel.framework/Versions/Current/Extensions/tun.ke xt” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
    The system extension “/Library/Frameworks/PrivateTunnel.framework/Versions/Current/Extensions/tap.ke xt” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
    What does this mean? How can I fix it so it doesn't freeze again.
    (All software up to date)

    hello,
    I have the same problem. does anyone have any ideas on what's going on and or how to fix it.
    Thanks!!
    Luis

  • Splash screen says "System extension cannot be used  The system extension "/System/Library/Extensions/PulseDriver.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.  How to fix?

    Please help!
    After installing iTunes 11.0.1 I got a splash screen that appears after all updates.  The screen reads:
    System extension cannot be used
    "The system extension “/System/Library/Extensions/PulseDriver.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update."
    Question: How do I re-install or replace this file?
    Jim

    I submitted the above question, later finding that it has been answered by Buller already.  No one need reply as Buller's answer seems to solve the problem for others, and I'll try that.
    Jim

Maybe you are looking for

  • Using ShellExecuteEx to shell out to the Reader in version 9 vs X?

    I have a question: VC++ v6.0 w/MFC is my langauge": In my code, when I shell out to run "printto" in version 9, it works just fine, but when I shell out to run "printto" in version 10, it does not send the information to the selected printer at all. 

  • Run itunes off external hard drive and keep settings

    I have an imac which has my consolidated music library on it. I also have a macbook which i use while traveling. My itunes is about 130 gigs, which is fine on my imac, but too big for my macbook. in the past what i have done is just put everything on

  • Uc520 - outbound calls take a long time

    hi, got my uc520 working, inbound calls work rigth away but outbound calls take a long time... so when I run any sort of debug on my uc520, I dial a number let's say 9 555 555 5555 it will take about 15 seconds before anything shows up in my debugs.

  • No option to rent movies or netflix

    The first category to rent movies is entirely blank. Under the internet options, there is not selection possible for Netflix.

  • My iPad keeps on crashing when I go on the Internet!

    I go on http://www.roblox.com and I go on there to check my messages and also try to check for new items and when I post in the comments or ROBLOX forums, it crashes when I click send! Is there a way to fix that? Information: iPad Mini: IOS 7.1.2 I b