Problems installing Lightroom 5 on Windows 8.1 Notebook

Hello, I have purchased Lightroom 5 and tried to install it on my Windows 8.1 Notebook. The installation failed with the following statement: An error occurred during the installation of assembly component (5C21D397-1DA5-3749-8C1F-165F21DE9E3E). HRESULT: 0x80073712 What can I do, what is the problem. Thank you!

Hi Chrigel65,
Please refer the KB Doc : http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html
Regards,
Rave

Similar Messages

Problem installing itunes on windows 64bit

problem installing itunes on windows 64bit, help me!!!

Yes, when I try to install the iTunes software on my notebook, running Windows 7 64-bit, I get a window that says: "There were errors before iTunes could be configured. Error during installation. Computer was not changed. "thanks

Error 1935 when trying to install Lightroom on windows 7 64 bit.

Having problems installing lightroom it comes up with the following message halfway through install:
Help!

Hi Delbertrum,
You might want to refer the KB Doc : http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html

I had a problem installing icloud on windows 8.1. What should I do? At the end of the installation process there is a error message.

I had a problem installing icloud on windows 8.1. At the end of the installation process there is a error message.What should I do?

I'm guessing that you have checked and complied with the system requirements?
System Requirements
Microsoft Windows 7 or 8
Microsoft Outlook 2007 or later or an up-to-date browser (for Mail, Contacts, Calendars)
Internet Explorer 9 or later, Firefox 22 or later, or Google Chrome 28 or later (for Bookmarks)
Broadband Internet access
Note: If you are upgrading from iCloud Control Panel 1.1 or earlier, you will need to sign out of iCloud Control Panel and uninstall it before downloading iCloud Control Panel 3.1

Problem Installing 817 on Windows 2000 with RAID Array

I am having a problem installing Oracle under windows 2000 which has 2 x 60 GB discs configured in RAID array. When I run the setup program the cursor goes busy for about 10 seconds and returns back to normal and nothing happens !. No errors nothing.
However when I run the Object Manager in the ods_preinstall directory it starts but in the log file I get the following error message:-
02/14/02 09:46:18 : (892) : Error in IO Control call for disk PhysicalDrive0 (Error 21)
02/14/02 09:46:19 : (892) : The count = 28
02/14/02 09:46:19 : (892) : The signature is 0x443aa035
02/14/02 09:46:19 : (892) : Error: First Partition of the disk must be an extended disk
02/14/02 09:46:19 : (892) : Found the partition: 7
Any idea whats happening....? Has anyone seen this before. Do I need to do something special in teh RAID..?
TIA
Martin

Here are some possible solutions:
1. The installation notes state that you must be logged on as Administrator to be able to install 9i. Are you logged on as the Administrator? Being logged on as user01 with Administrator priviledges isn't the same as Administrator.
2. Is the disk full? If I remember my installation correctly, I needed 3 times the size of the files. The documentation will tell you how much space you need.
Hope these two questions help
Regards,
Michael

I haveing problem installing itunes on Windows 7. Erorr masage is "There is a problem with this Windows installer package. A program reguired for this install to comlet coudnt be run. Contact your support personnel or package vendor."

Hello,
I haveing problem installing itunes on Windows 7. Erorr masage is "There is a problem with this Windows installer package. A program reguired for this install to comlet coudnt be run. Contact your support personnel or package vendor."
Please heLp.
Thank you.

Repair your Apple Sofyware update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install

Having problems installing iTunes on Windows XP

Having problems installing iTunes on Windows XP - Error msg "There is a problem with Windows Installer Pkg. A program required for this install to complete could not be run. " However, it's an iTunes error msg.

The installation fails at the last possible moment each time.
are you getting an error message, dave? if so, what does it say? include error message numbers if you're getting any.

Problem installing itunes on windows 8 64bit. Installation gets stuck on Status: (blank) literally blank

Problem installing itunes on windows 8 64bit. Installation gets stuck on Status: (blank) literally blank. I really need to install this since I have only 1 PC and i just bought the new iPhone 6.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Problems installing Lightroom 4.4 on Windows 7 Ultimat 64bit

Hi everyone,
I have probplems installing Lightroom 4.4 on Windows 7 Ultimate 64bit and hope somebody can help me.
By the way: Lightromm 4.3 is still working fine.
Installation fails with the meassage
"Fehler beim Lesen von Datei: C:\Users\Markus\AppData\Local\Temp\{F7E7AEA5-5112-4244-B427-EC75DV1036A}\Adobe_Lightroom_ x64.msi. Überprüfen Sie, ob die Datei existiert und ob Sie darauf zugreifen können."
Translation:
Error on reading File: C:\Users\Markus\AppData\Local\Temp\{F7E7AEA5-5112-4244-B427-EC75DV1036A}\Adobe_Lightroom_ x64.msi Please check if the file exists and if you have access.
The file exists and I have access...
Any suggestions?
Markus

I was finally able to uninstall CS4 - it takes forever - and reinstall the original CS4 master suite on Windows 7. Then I used the help menu update tool to update directly from 4.0 - a download 930 MBs - that took a long time too - there must have been a huge number of folks downloading from Adobe last night. This morning, the updates worked and the 4.1 update is working smoothly with AVCHD and HDV and other functions all working.
Thanks everyone. As far as back up goes, I back up everything on separate drives. So if I'm currently working on a project, I'll have all the footage and project files duplicated on a separate drive. And, if it's a huge job, I may get paranoid and triple back it up
As far as backing up the system drive on my production machine - there's not much to back up - nothing other than CS4 and other plugins - in fact, I'll intentionally do a clean re-install once every 6 months or at least once a year just to humor myself.
But my test machine - now I have a deconstructionist approach - I'll try to break it just so I can then see what it takes to fix it!

Problem Installing iTunes In Windows 7 64-Bit

I am using Windows 7 64-Bit. I am experiencing problem installing iTunes.

Hello chngbg,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes installation issues:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Problems installing cs3 on windows 7

Does CS3 install and work normal when installed on a windows 7 system? Some say it installed / worked just fine. Others that they had problems installing or getting it to run. Others that it depens on which windows 7 system you have. Etc. etc.
What do I have to take into account when installing cs3 on a windows 7 machine? I know it's not designed for windows 7 but I rather use cs3 then cs4.

No one yet. I'm thinking about bying a laptop which has windows 7 already installed (I think home edition), but googling I found various topics of people having trouble getting cs3 master collection to work (programs of master collection not being installed, error messages about missing windows files etc, etc.). Which version of windows 7 should I have to make cs3/cs4 work? Or should I be able to install cs3/4 on any windows 7 computer without any problems? Or should I do anything specific before installing?
I'm a little worried that I won't be able to use cs3 (which I much rather use than cs4) when I buy a new computer with windows 7.

Despite English selected, I get "There was a problem installing Lightroom..." while installing 5.3

Found the announcement and KB-article [1] + other posts on the topic, but my problem is slithgly off;
I see in the Adobe Photoshop Lightroom 5 5.3 12-30-2013.log that the MSI issue happens:
Install MSI payload failed with error: 1624 - Error applying transforms.
Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1624
My Adobe Creative Cloud app has "English (International)" set as the app language, though.
Any hope for me to complete the upgrade?
[1] http://helpx.adobe.com/lightroom/kb/error-installing-lightroom-53.html

Got excellent help from Dilip on Adobe chat!
Trick was roughtly;
Sign out of and close CC
Empty temp folder (run -> %temp%)
Sign back in to CC
Restart LR-install, it will fail again. Don't touch
In temp-folder, search for sub-folder called Lightroom_5_CCM_LS1_win6, with the file Adobe_Lightroom_x64.msi in it.
Execute install from mentioned file - that works (should work, and did for me) OK
Sign out and close CC
Sign back in -> now Lightroom 5.3 is listed as installed and up to date!
Thanks a lot, Dilip!

Problem installing iTunes on windows

When I try to install itunes on windows this shows up , The installer has insufficient privilages to modify this file :C:\Program Files\ Common Files\Apple\MobileDevice Support\AppleMobileDeviceHelper.exe..........please help

I also have WinPro x64 and encounter the same problems as yours. Have you tried iTunes 7.0.1, if so, please let me know. Thanks.

Problems Installing JDK 7u2 Windows 64-bit

I've downloaded the Development Kit but for some reason it won't install. I try clicking on it and nothing...
Help please.

The problem of installation of JDK 7u2 on Windows x64 is coming for both 32 bit and 64 bit versions of JDK.... However, i have tried installing them on Windows x86 (specifically Win XP SP3 x86 on VirtualBox 4.1.8) and the 32 bit version of JDK seems to be installing just fine on 32 bit Windows.
I might be wrong here but maybe the problem is that the 32 bit code on the JDK 7u2 may contain some 16bit code and so the Windows x64 is not able to run it (x64 OS not backwards compatible with 16 bit code). However the chances of this is slim since this is an update and the JDK 7u1 both 32 and 64 bit versions were fine.
However if this might have happened, then it is also possible that the 16bit code is also present in the 64 bit version of JDK 7u2 and thats why both the versions are not running on Windows x64.
Hoping they fix the issue soon. I need to do some testing and programming on Java 7.

Problem installing printer on windows 7 enterprise machine

Hi
I have HP Color LaserJet CP2025DN printer which i'm trying to install on my windows 7 machine. I have search on HP site where I was told that I can get the driver from windows update but when I run the windows update I cant seem to find cp2025dn or cp2020
printer from list.
Can someone please help me installing this printer.
When I go into my printer and device I see this icon.
My printer usb info
USB\VID_03F0&PID_5417&REV_0100

Hi,
Since all drivers in Windows update are produced from manufacturer and then after passing the Windows Logo Program testing, then they can be distribute onto update, that should be little delayed. I
suggest we download the latest driver applied to Windows 7 from manufacturer site.
Before installing the driver, is suggest you open Control Panel\All Control Panel Items\Programs and Features and delete the printer driver that is already installed.
I'm seeing a lot of information about the HP LaserJet CP2025dn not working properly with Windows 7.
I suggest contacting HP for the drivers support for Windows 7, or you can install the driver with Vista compatible mode for test:
1. Insert the installation media, right click on the DVD drive icon and choose Open
2. In the open folder, right click the program setup.exe file and click the Properties option.
3. Select the Compatibility tab.
4. Select the Run This Program in Compatibility Mode option.
5. From the drop-down list, choose the operating system you ran before upgrading to Vista.
6. If necessary, select the option to run the program as an administration.
7. Click OK.
Now, right click on Setup.exe and choose Run as administrator to install it again.
Furthermore, you can try to use Windows XP mode to use these printer.
Install and use Windows XP Mode in Windows 7
http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7
I also would like to suggest you contact HP directly to consult the issue. In this way, your issue can be fixed efficiently.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Problems installing Lightroom 5 on Windows 8.1 Notebook

Similar Messages

Maybe you are looking for